Background job not yet been Finished
Hi,
I have set a Background job today at 10:15 to start run at today 11:30 AM.
it is a periodic daily process at 11:30 am.
But when i checked the status of this job, its still in the status Released.
i know that, this job will not take more then 20 mins
what could be reason?
Regards,
Swetha
Hello Sweta,
As the job is in 'released' status so you can say that it has not started running, it will come to 'active' status as soon as it starts running, so you should not fear to cancel the job scheduled.
Answer to why in 'released' status for such a long time may be due to some network speed problem or due to some other jobs alreay running in the system which would be occupying all the work processes which are available in the system. If possible try to find the job which has taken more that 65 thousand seconds, kill that job and then refresh after 5-10 mins to see the status of your job.
Hope it helps.
Thanks,
Jayant
Similar Messages
-
Dear all!
Please help me with this!
I have just create an apple id and when I want to sign in iTunes store, the message ( this apple Id has not yet been used in the iTunes store please) appears and when I tap the review, again billing information is asked I don't know how complete this section without credit cars and authorize my account please help me with this. Plz, plz plz plz help me?Hi, I had this problem as well. Everyone kept telling me just to select the "None" option next to the credit card choices -- but I didn't HAVE a "None" option and was getting very frustrated!
It turns out that in this case, you do have to add a credit card to finish creating your Apple ID. Then as soon as it's created, you can go to "Account" at the bottom and immediately remove your credit card information. This worked for me -- my credit card was only in the system for about 15 seconds before I was able to remove it with no problem.
Hopefully this works for you as well!!
Unless you don't have a credit card at all, in which case there might not be a solution. I have a credit card and just didn't want my information stored by Apple. Anyway, good luck! -
Delivery has not yet been put away / picked (completely)
Hello SDNers,
I have a Batch program that is calling VL02n for Delievry Picking ,Pcking & PGI....
This batch program runs in Background
For Some Delivery it is giving this Error Message "Delivery has not yet been put away / picked (completely)"
...But When i run the same program in foreground delivery got Processed Well.
CAN U PLS HELP ME
>Why this Happening
>In what scenarion we genearally get this message(we dnt have TO Confirm Step in our Process)
>even i Analyze the Program of VL02n ...This message is not there
From Where this message is comming
Thx in advance
PLS RPLY ASAPAfter reading again through your messages, I understand that you are doing both PICK and PGI in single update BDC call to VL02N.
This is NOT correct way to do this, as this does not ensure that PICK values are committed first and then only PGI is attempted. We did face similar problems and have solved it by separating PICK and PGI in to two calls separated by COMMIT WORK AND WAIT.
I would suggest you to split your BDC into two calls. One which does only PICK and save and then followed by COMMIT WORK AND WAIT and then followed by another which does PGI and save. This should avoid the problem altogether.
Why it is not happening in foreground mode is it does not happen so quickly as in background. Even a split second can make a difference, that is why I would want you to split up both PICK and PGI update in two separate CALL TRANSACTION VL02N
I am not sure if it would help to know where the "Delivery has not yet been put away / picked (completely)" message is raised, as it is raised withing SAPs PGI routines, and it is mandatory that ONLY picked values are used for PGI.
I can only say that the message is given under id VL and no 609, it should be embedded somewhere in the PGI call, why don't you try to PGI without picking and put a watchpoint SY-MSGNO = 609 -
HT2534 apple id has not yet been used in the itunes store
Dear Sir,
I have goto apps Store & download free apps but following error message show on screen apple id has not yet been used in the itunes store.
pls solution me for download free apps..Hi, I had this problem as well. Everyone kept telling me just to select the "None" option next to the credit card choices -- but I didn't HAVE a "None" option and was getting very frustrated!
It turns out that in this case, you do have to add a credit card to finish creating your Apple ID. Then as soon as it's created, you can go to "Account" at the bottom and immediately remove your credit card information. This worked for me -- my credit card was only in the system for about 15 seconds before I was able to remove it with no problem.
Hopefully this works for you as well!!
Unless you don't have a credit card at all, in which case there might not be a solution. I have a credit card and just didn't want my information stored by Apple. Anyway, good luck! -
when i sign in my account on itune,they say " this apple id has not yet been used with the itune store', when i sign in my account on itune,they say " this apple id has not yet been used with the itune store' help me
Follow the on screen prompts to finish setting up your Apple ID for use in the iTunes Store, or post any issue you are having with details.
-
I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off". I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
Can somebody advice.
ThanksCan you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N -
How to revert back a SAP NOTE? Dump- Field symbol has not yet been assigned
Hi Experts,
We r getting dump(cause: Field symbol has not yet been assigned) in production for ABUMN tx, so, when debugged, it came to know that, the Field symbol is coming from REUSE_ALV_LIST_DISPLAY!!
So, for some reason the system message text is not getting output in ALV-->Dump!!
So, found a NOTE causing this problem!!
So, pls. let me know that, How to revert back this/any SAP NOTE? pls. in detail steps wise!!
thanq
Edited by: Srinivas on Jan 24, 2008 4:32 PMHi
In SNOTE tcode, select the Note that you implemented and click on 'RESET SAP Note Implementation'
shylesh -
Hi can anybody help or advise me? I've recently bought the i-phone 4s, I've set up my apple I.D and password but everytime I try and log in it says "this apple I.D has not yet been used on the i-tunes store" I click "review" follow the instructions and agree to the terms and condition's, enter my bank details but it declines every time? I've tried both my accounts and its declined both, this stops me from logging in so I can't download anything for free or buy anything, my sister had the option of skipping the bank details part when she created her apple I.D and just enters her's when buying something, why do I not have that option?? And why is it declining my bank details...please HELP!!!!!
The details I'm entering are correct, I choose visa as my card type, enter my card number, enter my expiry date and my last 3 digts on the reverse of the card, enter my address and zip code plus my home telephone number, click continue and it says "the payment method you have selected has been declined, please enter another payment method". I've lost count how many times I've tried, I've typed my details in slowly making sure I put them in properlly and it still declines it, I've even tried makeing a new apple I.D and when I get to the bank details part it declines it again so I am forced to press cancel and all details are not saved so its just like I'm hitting a brick wall, its ******* me off!!! I can't even download any of the free app's because to do so you must log in but when I do it says "this apple I.D has not yet been used in the i-tunes store" review my details and can't get past the bank details part. So doesn't log me in, I'm honestly out of ideas
-
why when i want to download a free app from app store it asks for my apple id and when i give my apple id it then says "this apple id has not yet been used in the itunes store". i dont even know what that means and it will this happen everytime?
If you are within 14 days of purchase you can still return the iPhone and get the phone that suits your needs, however, I think you will find that no matter which phone you get the content provider will want to know how you are going to pay for future purchases. For Android phones it is Google, and they will certainly want to know.
To create an Apple account without a credit card see: http://support.apple.com/kb/HT2534 -
please can anyone help me to download some apps for my iphone .. i am simply not able to log in to the itunes store , when i enter my apple id it says that it has not yet been used with the itunes store
Ok, you should generally only get this when you are converting your ID to an iTS account for the first time.
Sign into iTunes with your Apple ID and you should get this.... IRC once you agree or accept it's now an iTS account and you wont get that again. -
when i log in my apple id in itunes a message prompt me "This Apple ID has not yet been used with the itunes store" what do i need to do?
If you can log into the computer, go to the Mac App Store and purchase Mavericks under your AppleID. Even though its free, they still consider it a purchase.
If you are not able to log into your Mac you can try on a different Mac. Once you purchase it, you can stop the download if you want.
Once you do that then you should be able to reinstall via the Recovery HD -
I applied and received an upgrade code to Redeem Mountain Lion for my new MBP.
I get this message when I try to Sign in to the App Store after entering the redemption content code, and also if I just try to "Sign In". The first part of the error is true - I haven't used the AppleID with the iTunes store.
I received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
I also tried to re-create this appleID...(it was one suggestion I saw for this issue) It doesn't let me since the ID already exists...
The error is:
"This Apple ID has not yet been used with the iTunes Store. Please review your account information." I click "Review", next message "You must turn on cookies to continue. Cookies must be enabled if you want to create or edit.. etc."
It's clearly not a cookie issue.. Stuck...The first part of the error is true - I haven't used the AppleID with the iTunes store.
Try here > Using an existing Apple ID with the iTunes Store and Mac App Store
received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
Correct.
It's clearly not a cookie issue..
As for cookies. Quit the App Store. Now open the Finder. From the Finder menu bar click Go > Go to Folder.
Type this exactly as you see it here: ~/Library/Cookies
Click Go the move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Relaunch the App Store. -
Hello,
I have a Apple ID, however when i am trying to login to App Store or iTunes, i am getting a message "This Apple ID has not yet been used with the App Store"?
I am able to login to iCloud with my Apple ID
Kindly Assist
Regards
ShujaIf you have never used the Apple ID to make purchases from iTunes or the Mac App Store you need to follow the steps to create an account with that Apple ID.
-
Field symbol has not yet been assigned. ???
Dear Experts ,
W hen i tried to execute my program this error appears :
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSLVC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32821).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
and Here is my CODE :
*& Report ZPO
Report ZPO1.
type-pools slis.
PARAMETERS : PO_Doc like EKBE-EBELN DEFAULT '4800000007'.
PARAMETERS : Plant TYPE WERKS DEFAULT '1000'.
PARAMETERS : PO_ORG TYPE EKORG DEFAULT ''.
data TtlS type mara-wesch .
data TtlH type mara-wesch .
data Ttl type mara-wesch .
data ZEKBE type TABLE OF EKBE.
data ZEKBER type EKBE.
data ZEKPO type TABLE OF EKPO.
data ZEKPOR type EKPO.
data ZEKKOR TYPE EKKO.
data ZNAME1F type LFA1-LIFNR.
data ZWGBEZF TYPE T023T-WGBEZ.
data i type n.
data counter type n.
types : begin of SBAGDS,
Serial Type n, "Purchase Order
EBELN like EKKO-EBELN, "Purchase Order
MATNR like EKPO-MATNR, "Material
TXZ01 like EKPO-TXZ01, "Short Text
MATKL like EKPO-MATKL, "Material Group
WGBEZ like T023T-WGBEZ, "Material Group Desc"
SUBMI like EKKO-SUBMI, "GPM
CHARG like EKBE-CHARG, "Batch
LIFNR like EKKO-LIFNR, "Vendor
NAME1 like LFA1-NAME1, "Vendor Name
RECV like mara-wesch, "Received Quantity
REVR like mara-wesch, "Reversed Quantity
DELV like mara-wesch, "Delivered Quantity
end of SBAGDS .
DATA : BAGDS TYPE SBAGDS OCCURS 0 WITH HEADER LINE.
data Struc like BAGDS.
data: gr_table like BAGDS OCCURS 0 WITH HEADER LINE.
data: gt_fieldcat type slis_t_fieldcat_alv, gt_outtab type SBAGDS occurs 0 with header line.
INITIALIZATION.
i = 0.
counter = 0 .
perform field_cat_init using gt_fieldcat[].
FORM field_cat_init using rt_fieldcat type slis_t_fieldcat_alv.
data: ls_fieldcat type slis_fieldcat_alv,
pos type i value 1.
clear LS_FIELDCAT.
*Column 1
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'Serial'.
ls_fieldcat-SELTEXT_L = 'Serial'.
ls_fieldcat-DDICTXT = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 2
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'EBELN'.
ls_fieldcat-SELTEXT_L = 'Purchase Order'.
ls_fieldcat-DDICTXT = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 3
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-SELTEXT_L = 'Material'.
ls_fieldcat-DDICTXT = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 4
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'TXZ01'.
ls_fieldcat-SELTEXT_L = 'Short Text'.
ls_fieldcat-DDICTXT = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 5
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'MATKL'.
ls_fieldcat-SELTEXT_L = 'Material Group'.
ls_fieldcat-DDICTXT = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 6
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'WGBEZ'.
ls_fieldcat-SELTEXT_L = 'Material Group Desc'.
ls_fieldcat-DDICTXT = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 7
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'SUBMI'.
ls_fieldcat-SELTEXT_L = 'GPM'.
ls_fieldcat-DDICTXT = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 8
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'CHARG'.
ls_fieldcat-SELTEXT_L = 'Batch'.
ls_fieldcat-DDICTXT = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 9
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'LIFNR'.
ls_fieldcat-SELTEXT_L = 'Vendor'.
ls_fieldcat-DDICTXT = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 10
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'NAME1'.
ls_fieldcat-SELTEXT_L = 'Vendor Name'.
ls_fieldcat-DDICTXT = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 11
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'RECV'.
ls_fieldcat-SELTEXT_L = 'Received Quantity'.
ls_fieldcat-DDICTXT = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 12
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'REVR'.
ls_fieldcat-SELTEXT_L = 'Reversed Quantity'.
ls_fieldcat-DDICTXT = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 13
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'DELV'.
ls_fieldcat-SELTEXT_L = 'Delivered Quantity'.
ls_fieldcat-DDICTXT = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
endform.
START-OF-SELECTION.
select SINGLE * from EKKO into ZEKKOR where EBELN = PO_DOC.
select SINGLE * from EKPO into ZEKPOR where EBELN = PO_DOC.
select SINGLE NAME1 from LFA1 into ZNAME1F where LIFNR = ZEKKOR-LIFNR.
* ' Buliding Structure
Struc-EBELN = ZEKPOR-EBELN.
Struc-SUBMI = ZEKKOR-SUBMI.
Struc-LIFNR = ZEKKOR-LIFNR.
Struc-Name1 = ZNAME1F.
select * from EKPO into TABLE ZEKPO where EBELN = PO_Doc and WERKS = plant.
LOOP at ZEKPO into ZEKPOR.
select SINGLE WGBEZ from T023T into ZWGBEZF WHERE MATKL = ZEKPOR-MATKL .
counter = counter + 1.
* ' Buliding Structure
Struc-Serial = counter.
Struc-MATNR = ZEKPOR-MATNR.
Struc-TXZ01 = ZEKPOR-TXZ01.
Struc-MATKL = ZEKPOR-MATKL.
Struc-WGBEZ = ZWGBEZF.
* Calcualting Debit transactions from PO History
select * from EKBE into table ZEKBE where EBELN = PO_Doc and MATNR = ZEKPOR-MATNR and EBELP = ZEKPOR-EBELP and BWART NOT LIKE '' and SHKZG = 'S'.
LOOP AT ZEKBE INTO ZEKBER.
TtlS = TtlS + ZEKBER-MENGE.
ENDLOOP.
* ' Buliding Structure
Struc-CHARG = ZEKBER-CHARG.
Struc-RECV = TtlS.
Ttl = TtlS.
clear TtlS.
* Calcualting Credit transactions from PO History
select * from EKBE into table ZEKBE where EBELN = PO_Doc and MATNR = ZEKPOR-MATNR and EBELP = ZEKPOR-EBELP and BWART NOT LIKE '' and SHKZG = 'H'.
LOOP AT ZEKBE INTO ZEKBER.
TtlH = TtlH + ZEKBER-MENGE.
ENDLOOP.
* ' Buliding Structure
Struc-REVR = TtlH.
* Calculating Total Delivered
Ttl = Ttl - TtlH.
clear TtlH.
* ' Buliding Structure
Struc-DELV = Ttl.
clear Ttl.
* Writtng ITAB
APPEND Struc to BAGDS.
ENDLOOP.
* Reading ITAB
* WRITE : / , 'ITAB Begin : ' .
* loop at BAGDS into Struc.
* counter = counter + 1.
* write : /,'Serial : ',counter.
* write : / ,'PO : ',Struc-EBELN.
* write : / ,'Vendor : ',Struc-LIFNR.
* write : / ,'Vendor Name : ',Struc-NAME1.
* write : / ,'Material : ',Struc-MATNR.
* write : /,'Short Text: ',Struc-TXZ01.
* write : / ,'Model : ',Struc-MATKL.
* write : / ,'Model Desc : ',Struc-WGBEZ.
* write : /,'GPM : ',Struc-SUBMI.
* write : /,'Lot : ',Struc-CHARG.
* write : /,'Received : ',Struc-RECV.
* write : /,'Reversed : ',Struc-REVR.
* write : /,'Delivered : ',Struc-DELV,/,/,/.
* ENDLOOP.
* Call ALV Grid Viewer
*BREAK-POINT.
gr_Table[] = BAGDS[].
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_STRUCTURE_NAME = 'SBAGDS'
IT_FIELDCAT = gt_fieldcat[]
TABLES
T_OUTTAB = gr_Table.
Please Advise
Edited by: Sap Sap on Jul 27, 2009 12:18 PM
Edited by: Sap Sap on Jul 27, 2009 12:22 PM
Edited by: Sap Sap on Jul 27, 2009 12:22 PMHi,
The problem seems to be in your ALV grid display.
The reason must be your field catalog.
Just check your fieldcatalog.
The value in the fieldname field of the fieldcatalog should be same as the fieldname in your internal table and should be in capital letters.
Probably you must have mistyped some field.
Kinldy check.
Regards,
Ankur Parab -
why is my billing information not being review correctly...like it sayes my apple id has not yet been used in the itune store and it tells me to review my account info but for some reason it doesnt work
Hi there ethangabe,
You may find the information in the article below helpful.
Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
http://support.apple.com/kb/ht2589
-Griff W.
Maybe you are looking for
-
2 Items - Pre 2 - Google Calender not connect & Recovery Woes!
Hi There.... Have 2 Issues... One is supposed to being worked on for a solution, being unable to log into new Palm Pre 2, a week old, that cannot import my Profile from my Pre 1, with maybe hundreds of Pounds Paid Apps. Second, whilst I wait for Palm
-
Hi, my iPhone has a small dark spot on my screen. If I tap it with a little bit of pressure, it leaves a mark for about a second. You can only see the spot on white and really light colors. On some games if a tap anywhere near it, I can see the spot
-
Hello all, i have already read about several post, with that topic, but still found not an acceptable solution for my problem. We try using NWDI (SPS14). In my SLD i created a new SC EXTLIBS. I configured a Track and loaded the Dev-Conf into the NWDS
-
I try to access my new Adobe Pro XI download to use it, and a message says "serial number not valid" or words to that effect. I downloaded on Friday afternoon. Why? This should have been easy.
-
Images flash black when I use select / lasso tools. Background also changes color.
Help? It's incredibly distracting to try and select parts of an image when the images are acting like strobe lights. This happens not only with the lasso but also when I am resizing an image. It is soley the images that flash black - the rest of th