Background job spool to mail
Hi All
The spool generated by background job can be send via mail. I am using this to sent to internal mail ie SAP mail . But I don't see provision for sending to multiple user at the same time. Can it be done
With Regards
Arun
Hi Arun
Please refer the below link. I think it may help you in this regards.
[http://www.home4sap.com/tips/spool-email.shtml]
Regards
Makarand
Similar Messages
-
What data is stored in the CC Background Job Spool File?
What information is stored in the location referenced in the CC Configuration/Miscellaneous setting of 'Background Job Spool File Location'? Our test and production versions of this system are configured the same, with both pointing to the same location on their respective servers. However the test location shows a virsa/bgJobSpool folder in it containing multiple files while our production system shows this location as empty.
Both versions seem to be working OK. We are running backgrounds jobs in each (risk analysis, management reviews, rule generation, etc.) and seeing results.
We updated to the GRC 5.2 a few months ago and are currently on SP9. This issue came up during a system audit, so we need to come up with an explanation for the differences.
Thanks.I had reviewed that SAP note previously, but it does not seem to help any with our situation. We are running ad hoc background risk analysis jobs frequently and can always see the results. Everything seems to work fine from the application side, we just don't see the logs where we thought they should be over on the server.
From the outside, it looks like maybe it is ignoring the configuration setting and is still using the default location for the log. Does it need to be on the same drive as the application? I believe our application and the default location are both on our E drive, but we want to put the location for this and the Alert Log on the D drive.
Thanks. -
Has anyone put the RAR Background Job Spool on a different server?
We are on GRC 5.3 SP 13.
Has anyone put the RAR Background Job Spool File Location (assigned in the Miscellaneous configuration section) on a server different than the one that the GRC Frontend/Java system is on?
I currently have it assigned to a folder on the GRC server, but it is running out of space. I am having a problem getting the users to delete old reports as they say they need to keep them for internal Audit controls. They are also resisting downloading the reports (more work for them). I have been told that we cannot easily increase the file space on the GRC server (would basically have to purchase more storage and rebuild the server).
I was thinking about moving the folder over to our virtual storage area, were file size can be more easily expanded. I haven't found any documentation that says the folder has to be on the GRC server, but I also haven't seen any examples of where it has been put on a different server.
Has anyone done this, and did you run into any problems?
Thanks.Hello Bob,
I got your point. Probably there's no recommendation about this, because the recomended practise is to delete or archive the spools as suggested in note : Note 1511027 - Periodic clean up of spool files
If you have a requirement to keep these files "online", I think the option to save them to a network drive is fine. I haven't tried it for this specific scenario. You have to take into account:
- Specific user to connect to FileServer
- Availability of the FileServer. If the FS is down, the RAR job will cancel.
- Performance. I mean, write to a local disk is not the same to write to a network drive. This point is very difficult to measure, because it depends on a lot of things like network speed, server load, etc.
Maybe someone has already implemented it and gives you more hints.
Cheers,
Diego. -
Send/export the background job spool in Excel (in MHTML format) in ECC 6.0.
Hello All,
I have a requirement to send/export the background job spool in Excel (in MHTML format) in ECC 6.0. Please help.
Thank you.
NaliniHi Jigar,
Thanks for your response.
Anything is like download to desktop or email is fine. But in MHTML format.
We can download the ALV report in MHTML spreadsheet format when we run the program online. But the program is running for long time and going to dump.
So i scheduled it as background job and downloading the output in .HTML format. But user wants the spool/report output in .MHTML spreadsheet format.
I can write the code. Instead of changing the existing program I would like to know is there any way (from standard SAP) that I can get the background spool in MHTML spreadsheet format.
Thanks,
Nalini -
Mail not being sent for background job spool
Hello All,
I have created a back ground job by adding a mail id in the spool receipient list. The job has finished successfully and spool is created but the mail has not been sent I have checked SOST transaction and no mail has been sent to this mail id.
This is only happening for some jobs other jobs are able to successfully send the spool as mails to the mail id's mentioned in spool receipient list.
I would like to know why this is happening only for some jobs and how can I check the whether mail has been generated or not.
Your replies will be greatly appreciated.
Thankyou,
RanjanHi
To check whether mail is generated you can create dynamic break-point with SAAB transaction.
Using this transaction you create a memory area for your jobs where you can load any data value of your report..
Probably something goes wrong with COMMIT of Mail Function module system.
Hope to help.. -
ALV list display in a Background job - Spool output
Hi,
We are currently working on a report scheduled to be run in the background job, and the ALV list is displayed in the spool output.
ALV list in the spool does not look the same as front run job, the column headers are all crowded together, and there is no grid in-between different columns or rows. It's hard to read.
Is there a way to add grid for this kind of output?
Thanks!Hi Deepak:
I expanded your report into two rows display, and the grid in the spool display simply gone!
report zzscratch line-size 120 no standard page heading.
type-pools slis.
tables pa0001.
data : li_field type standard table of slis_fieldcat_alv,
gi_events type standard table of slis_alv_event,
gr_layout_bck type slis_layout_alv,
gr_save like disvariant,
gr_events type slis_alv_event.
types : begin of gtt_emp,
pernr type persno,
ename like pa0001-ename,
uname like pa0001-UNAME,
end of gtt_emp.
data : lr_field type slis_fieldcat_alv.
data : lc_rep like syst-repid.
data : li_emp type standard table of gtt_emp,
lr_emp type gtt_emp.
data : gv_ref_table type lvc_rtname.
gv_ref_table = 'CATSDB'.
lr_field-fieldname = 'PERNR'.
lr_field-ref_tabname = gv_ref_table.
lr_field-inttype = 'N'.
lr_field-outputlen = 8.
lr_field-seltext_l = 'EMPLOYEE Number'.
append lr_field to li_field.
lr_field-fieldname = 'ENAME'.
lr_field-ref_tabname = 'PA0001'.
lr_field-inttype = 'C'.
lr_field-outputlen = 40.
lr_field-seltext_l = 'EMPLOYEE Name'.
append lr_field to li_field.
lr_field-fieldname = 'UNAME'.
lr_field-ref_tabname = 'PA0001'.
lr_field-inttype = 'C'.
lr_field-outputlen = 12.
lr_field-seltext_l = 'User Name'.
lr_field-row_pos = 2.
lr_field-col_pos = 1.
append lr_field to li_field.
lc_rep = sy-repid.
gr_layout_bck-edit_mode = 'D'.
gr_save-report = sy-repid.
lr_emp-pernr = '00000001'.
lr_emp-ename = 'abc'.
lr_emp-uname = 'testus'.
append lr_emp to li_emp.
lr_emp-pernr = '00000002'.
lr_emp-ename = 'def'.
append lr_emp to li_emp.
lr_emp-pernr = '00000003'.
append lr_emp to li_emp.
lr_emp-pernr = '00000004'.
append lr_emp to li_emp.
lr_emp-pernr = '00000005'.
append lr_emp to li_emp.
lr_emp-pernr = '00000006'.
append lr_emp to li_emp.
lr_emp-pernr = '00000007'.
append lr_emp to li_emp.
lr_emp-pernr = '00000008'.
append lr_emp to li_emp.
end-of-selection.
Function module for ALV grid display
call function 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_buffer_active = 'X'
i_callback_program = lc_rep
is_layout = gr_layout_bck
it_fieldcat = li_field
i_save = 'A'
is_variant = gr_save
it_events = gi_events
TABLES
t_outtab = li_emp[]
EXCEPTIONS
program_error = 1
others = 2.
if sy-subrc <> 0.
clear gr_messages.
message e023 into gr_messages.
append gr_messages to gi_messages.
endif. -
Background job schedule and mail triggering
Hi Experts,
I schedule a background job to run a custom program for project closure.The job is running successfully. But,the mail I am getting from this job run is same all the time (means it's showing same project closure again and again though I am running job for different projects). Is it some bug in our custom program or any parameters required to be check in job schedule?
Kindly suggest.
Thanks & Regards
SaurabhYes. That is the point I am missing. Just one 'date' is checked and project is taken into account for the custom program and after its successful run the mail is sent to users.
And when the same program I am assigning in SM36,it is actually running the program accurately for project/s but sending the same mail which it send for very first project earlier.
Can you please guide me on the way to create these variants?
You will need to Save different variants for different projects and then assign the variants with your job.
Will it be required to create variant again and again and assign different projects individually? As, we are not sure that which project is gonna be created in future. So, need guideline how these variants can help me to sort out the e-mail issue.
Regards
Saurabh -
Background job - Spool output screwed up.
Hi Friends,
i am running a report in background and i have 40 to 50 columns as a result the output of the back ground job spool output does not show in one lone but as soon as it reaches to the certain point it splits the line and shows one line as as two...
what could be the problem?
thank you,
pasala.Check
In your report
- [REPORT - list_options|http://help.sap.com/abapdocu_70/de/ABAPREPORT_LIST_OPTIONS.htm] [LINE-SIZE width|http://help.sap.com/abapdocu_70/de/ABAPREPORT_LIST_OPTIONS.htm#&ABAP_ADDITION_2@2@]
- [NEW-PAGE|http://help.sap.com/abapdocu_70/en/ABAPNEW-PAGE.htm] [LINE-SIZE width |http://help.sap.com/abapdocu_70/en/ABAPNEW-PAGE_OPTIONS.htm#&ABAP_ADDITION_4@4@]
In print parameter of the step/job
- [SUBMIT - spool_options |http://help.sap.com/abapdocu_70/en/ABAPSUBMIT_PRINT_PARAMETERS.htm] [SPOOL PARAMETERS pri_params|http://help.sap.com/abapdocu_70/en/ABAPSUBMIT_PRINT_PARAMETERS.htm#&ABAP_ADDITION_1@1@] or [LINE-SIZE width |http://help.sap.com/abapdocu_70/en/ABAPSUBMIT_LIST_OPTIONS.htm#&ABAP_ADDITION_1@1@]
Also read [Printing Lists |http://help.sap.com/abapdocu_70/en/ABENPRINT.htm] and [SET_PRINT_PARAMETER|http://www.sdn.sap.com/irj/scn/advancedsearch?query=set_print_parameters] for LAYOUT and LINE_SIZE parameters.
Regards,
Raymond -
File path problem in background job spool
Hello ,
i have probelm in file path of the background job in spool.
i have selection screen
Radiobutton : p_local
parameter: path1.
Radibutton: p_applicatioserver
parameter: path2.
if i keep program in background job, it will alwas take second option.
Now user selected first option and executed job in abckground. File stored in the spplication server with corect file path name. (path2)
But when i go to sm37 entered job name and checked the spool, it gives me the file path name path1. but i need the file path1 in the background spool. my question whether i need to change the file path name in program or whether i have to change the setting
Regards,
zubFirst of all, local is not an option in background job; you can only save to the apps server, and your program should take that into consideration by checking for sy-batch = 'X', for example. You should be checking in your at selection-screen to be sure the user has not chosen local path and file and background job.
-
Hello all,
I have scheduled a background job to run a report which creates a spool and sends it to the recipients as a PDF attachment. Everything looks fine except the font in the PDF attachment. It is too small to read. Is there any control anywhere to adjust the font of the spool that is being sent to the recipients? Please let me know.
Thanks,
AVHello AV,
We have the same issue, can you please share to us how you resolve this?
Thanks,
Tomasz -
Table for background job spool list ?
i know the table for spool request : TSP01
But how should i link it to background job name ?
i want the link between background job name and spool request.
TBTCPV is the view but it stores only one spool request.....rather than multiple spoolreq generated by background job..Hi,
Table TBTCP has the Spool Request field PLIST field as well as Jobname JOBNAME field in it. Youc an link them together.
Regards,
Anji -
Background Job spool / output file in different app server
We are working with 2 ECC app servers, A and B.
I've defined in app server A a background job to run an abap report and this report creates and submit 4 other background jobs.
Each of these 4 jobs is regarding an abap report which outputs a text file in the server.
The question is, why are the jobs generating the files in different app servers randomically?
The same file, in the 1st execution was generated in app server A, and without any change was generated in app server B, in the job 2nd execution?
Thank you!Hi,
You can specify server name whille creating a batch job , so that it gets executed to that server only.
there is one field (in SM36 during creation or SM37 while modifying batch job) called "Exec Target " , where you can specify server name.
Hence you can plan to run your some batch jobs on server A or B.
Regards,
Rupali -
Background Job & Spool List Recipient not receiving all pages
I have a program that is run during our nightly cycle and is scheduled in SM36 with a spool list recipient designated for the report to be delivered to the user's SAP Inbox. The job completes successfully and creates a report that is over 100 pages. The user is only receiving 10 pages in their SAP Inbox. Is this a Basis system setting? Can we changes this on a per user basis?
Thanks,
HollyHi Holly,
it's sound like the <b>SAP-Note: 329537</b>
Symptom
If a batch job creates a spool and sends it to a recipients, only the first 1000 lines are sent.
Other terms
SAPOffice, spool list recipient
Reason and Prerequisites
For performance reasons, the output sent to SAPOffice is limited to 1000 lines.
Solution
If you wish to send spools longer than 1000 lines in Releases > 4.6B, proceeed as follows:
1. Apply the support packages or correction instructions mentioned in this note.
2. Create the following two entries in table TSPOPTIONS with transaction SE16:
option: BTC_FIRSTLINE value: < desired value, probably 1>
option: BTC_LASTLINE value: < desired value, e.g. 99999>
1. Call function module RSPO_OPTION_FLUSH with value NAME = '*'.
Please note that this change may impact performance, depending on the selected line interval.
In Releases < 4.6C or if you are not able to apply the support packages or corrections, you can accomplish this with a minor code change.
In program RSBTCRTE, change the parameter sent to the function module
RSPO_SPOOLJOB_TO_OFFICE as follows:
call function 'RSPO_SPOOLJOB_TO_OFFICE'
exporting
rqident =
spo_list_id
first_line
= 1
last_line =
1000 "<<< Delete
last_line =
99999 "<<< Insert
receiver
= recipient_object
mail_title
= document_data-obj_descr
exceptions -
Background job spool is not generated
Hi Guys,
I am facing the problem with when i execute the program in background,spool is not generated.
if execute it in foreground output is displaying.
Please help me on this issue.
Thanks,
BalaHi soumya,
after call transaction i have used write statement and submit the report in the BDC program.
BDC report is displaying the IM52 update budget orders in the output of the report.
Thanks,
Bala -
Changing layout at runtime, executing background job and sending mail inXLS
Hi
When i execute my program in foregroung by manually changing value of s_job = 'X' in debugging mode it is sending the correct XLS file via mail with all the data , whereas when i execute my program in backgroud mode it sends incomlete XLS file via mail, it has only first 2 records in any layout........can anybody please help in this regard....
program is as follows...
REPORT ZPMACR01_MD_MRP_100.
*& Report : ZPMACR01_MD_MRP_100
TABLES : MARA, MARC, MAKT, MBEW,MARD.
MAIL data declarations
TABLES : adr6 , sscrfields.
DATA: BEGIN OF mbody OCCURS 0,
message(100),
END OF mbody.
DATA: BEGIN OF addresses OCCURS 0,
addresses(100),
END Of addresses.
FIELD-SYMBOLS: <f> type ANY,
<tab> TYPE STANDARD TABLE,
<wa> type ANY.
DATA: count TYPE i value 0,
col_1 TYPE i.
DATA: new_table TYPE REF TO data, "pointer to dynamic table
new_line TYPE REF TO data. "pointer to work area of dynamic table
DATA: s_job TYPE c.
DATA: i_data_out_text TYPE string OCCURS 0 WITH HEADER LINE.
DATA: message TYPE string OCCURS 0 WITH HEADER LINE.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: BEGIN OF it_attach OCCURS 0,
line(2650) TYPE c,
END OF it_attach.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_hex LIKE solix OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
ALV data declarations
TYPE-POOLS: SLIS.
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
IT_FIELDCAT2 TYPE LVC_T_FCAT,
IT_FIELDCAT_FIN TYPE LVC_T_FCAT,
IT_FIELDCAT3 TYPE SLIS_T_FIELDCAT_ALV,
itab1 TYPE SLIS_T_FIELDCAT_ALV,
W_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
W_REPID TYPE SY-REPID,
IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: is_fieldcat LIKE LINE OF it_fieldcat.
DATA: is_fieldcat2 LIKE LINE OF it_fieldcat2,
Is_FIELDCAT3 LIKE LINE OF it_fieldcat3.
Data: variant type DISVARIANT,
v_size LIKE sy-tabix.
ALV Data
DATA:
i_sort TYPE slis_t_sortinfo_alv,
v_lvc_title TYPE lvc_title,
v_repid LIKE sy-repid,
c_user_command TYPE slis_formname VALUE 'ALV_USER_COMMAND',
gt_list_top_of_page TYPE slis_t_listheader,
gt_list_end_of_list TYPE slis_t_listheader,
gs_layout TYPE slis_layout_alv,
gt_events TYPE slis_t_event,
gs_events type slis_alv_event,
gt_print TYPE slis_print_alv,
g_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE'.
Selection Parameters
SELECTION-SCREEN BEGIN OF BLOCK B1.
SELECT-OPTIONS : SO_MATNR FOR MARA-MATNR OBLIGATORY.
SELECT-OPTIONS : SO_WERKS FOR MARC-WERKS.
SELECT-OPTIONS : SO_SPRAS FOR MAKT-SPRAS.
SELECT-OPTIONS : SO_BWKEY FOR MBEW-BWKEY.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
PARAMETERS: p_email TYPE somlreci1-receiver
default '[email protected]'.
SELECTION-SCREEN END OF BLOCK B2.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-002.
PARAMETERS : SO_LAY TYPE DISVARIANT-VARIANT DEFAULT '/DEFAULT'.
SELECTION-SCREEN END OF BLOCK B3.
DATA Declarations.
Data : BEGIN OF ITab OCCURS 0,
manr type mara-matnr,
end of ITAB.
data : BEGIN OF IT_TABLE OCCURS 0,
MATNR TYPE MARA-MATNR,
MATKL TYPE MARA-MATKL,
MEINS TYPE MARA-MEINS,
MTART TYPE MARA-MTART,
AHDIS TYPE MARC-AHDIS,
AUSDT TYPE MARC-AUSDT,
AUTRU TYPE MARC-AUTRU,
BESKZ TYPE MARC-BESKZ,
BSTFE TYPE MARC-BSTFE,
BSTMA TYPE MARC-BSTMA,
BSTMI TYPE MARC-BSTMI,
BSTRF TYPE MARC-BSTRF,
BWSCL TYPE MARC-BWSCL,
DIBER TYPE MARC-DIBER,
DISGR TYPE MARC-DISGR,
DISLS TYPE MARC-DISLS,
DISMM TYPE MARC-DISMM,
DISPO TYPE MARC-DISPO,
DISPR TYPE MARC-DISPR,
DZEIT TYPE MARC-DZEIT,
EISBE TYPE MARC-EISBE,
EISLO TYPE MARC-EISLO,
EKGRP TYPE MARC-EKGRP,
FHORI TYPE MARC-FHORI,
FXHOR TYPE MARC-FXHOR,
KAUTB TYPE MARC-KAUTB,
KORDB TYPE MARC-KORDB,
KZAUS TYPE MARC-KZAUS,
LFGJA TYPE MARC-LFGJA,
LFMON TYPE MARC-LFMON,
LGRAD TYPE MARC-LGRAD,
LVORM TYPE MARC-LVORM,
MABST TYPE MARC-MABST,
MINBE TYPE MARC-MINBE,
MMSTA TYPE MARC-MMSTA,
MMSTD TYPE MARC-MMSTD,
MRPPP TYPE MARC-MRPPP,
MTVFP TYPE MARC-MTVFP,
NFMAT TYPE MARC-NFMAT,
PERKZ TYPE MARC-PERKZ,
PLIFZ TYPE MARC-PLIFZ,
PLVAR TYPE MARC-PLVAR,
PSTAT TYPE MARC-PSTAT,
QZGTP TYPE MARC-QZGTP,
RGEKZ TYPE MARC-RGEKZ,
RWPRO TYPE MARC-RWPRO,
SBDKZ TYPE MARC-SBDKZ,
SCHGT TYPE MARC-SCHGT,
SHFLG TYPE MARC-SHFLG,
SHPRO TYPE MARC-SHPRO,
SHZET TYPE MARC-SHZET,
SOBSL TYPE MARC-SOBSL,
STRGR TYPE MARC-STRGR,
TRAME TYPE MARC-TRAME,
UEETK TYPE MARC-UEETK,
UEETO TYPE MARC-UEETO,
UMLMC TYPE MARC-UMLMC,
UNETO TYPE MARC-UNETO,
USEQU TYPE MARC-USEQU,
VINT1 TYPE MARC-VINT1,
VINT2 TYPE MARC-VINT2,
VRBDT TYPE MARC-VRBDT,
VRBFK TYPE MARC-VRBFK,
VRBMT TYPE MARC-VRBMT,
VRBWK TYPE MARC-VRBWK,
VRMOD TYPE MARC-VRMOD,
WEBAZ TYPE MARC-WEBAZ,
WERKS TYPE MARC-WERKS,
WZEIT TYPE MARC-WZEIT,
DISKZ TYPE MARD-DISKZ,
LBSTF TYPE MARD-LBSTF,
LGORT TYPE MARD-LGORT,
LMINB TYPE MARD-LMINB,
LSOBS TYPE MARD-LSOBS,
MAKTX TYPE MAKT-MAKTX,
END OF IT_TABLE.
DATA: BEGIN OF IT_MARD OCCURS 0,
MATNR TYPE MARA-MATNR,
MATKL TYPE MARA-MATKL,
MEINS TYPE MARA-MEINS,
MTART TYPE MARA-MTART,
DISKZ TYPE MARD-DISKZ,
LBSTF TYPE MARD-LBSTF,
LGORT TYPE MARD-LGORT,
LMINB TYPE MARD-LMINB,
LSOBS TYPE MARD-LSOBS,
MAKTX TYPE MAKT-MAKTX,
END OF IT_MARD.
DATA: BEGIN OF IT_MBEW OCCURS 0,
MATNR TYPE MBEW-MATNR,
BKLAS TYPE MBEW-BKLAS,
SALK3 TYPE MBEW-SALK3,
PEINH TYPE MBEW-PEINH,
STPRS TYPE MBEW-STPRS,
VERPR TYPE MBEW-VERPR,
VPRSV TYPE MBEW-VPRSV,
END OF IT_MBEW.
data : BEGIN OF IT_FINAL0 occurs 0,
MATNR LIKE MARA-MATNR,
MATKL LIKE MARA-MATKL,
MEINS LIKE MARA-MEINS,
MTART LIKE MARA-MTART,
AHDIS LIKE MARC-AHDIS,
AUSDT LIKE MARC-AUSDT,
AUTRU LIKE MARC-AUTRU,
BESKZ LIKE MARC-BESKZ,
BSTFE LIKE MARC-BSTFE,
BSTMA LIKE MARC-BSTMA,
BSTMI LIKE MARC-BSTMI,
BSTRF LIKE MARC-BSTRF,
BWSCL LIKE MARC-BWSCL,
DIBER LIKE MARC-DIBER,
DISGR LIKE MARC-DISGR,
DISLS LIKE MARC-DISLS,
DISMM LIKE MARC-DISMM,
DISPO LIKE MARC-DISPO,
DISPR LIKE MARC-DISPR,
DZEIT LIKE MARC-DZEIT,
EISBE LIKE MARC-EISBE,
EISLO LIKE MARC-EISLO,
EKGRP LIKE MARC-EKGRP,
FHORI LIKE MARC-FHORI,
FXHOR LIKE MARC-FXHOR,
KAUTB LIKE MARC-KAUTB,
KORDB LIKE MARC-KORDB,
KZAUS LIKE MARC-KZAUS,
LFGJA LIKE MARC-LFGJA,
LFMON LIKE MARC-LFMON,
LGRAD LIKE MARC-LGRAD,
LVORM LIKE MARC-LVORM,
MABST LIKE MARC-MABST,
MINBE LIKE MARC-MINBE,
MMSTA LIKE MARC-MMSTA,
MMSTD LIKE MARC-MMSTD,
MRPPP LIKE MARC-MRPPP,
MTVFP LIKE MARC-MTVFP,
NFMAT LIKE MARC-NFMAT,
PERKZ LIKE MARC-PERKZ,
PLIFZ LIKE MARC-PLIFZ,
PLVAR LIKE MARC-PLVAR,
PSTAT LIKE MARC-PSTAT,
QZGTP LIKE MARC-QZGTP,
RGEKZ LIKE MARC-RGEKZ,
RWPRO LIKE MARC-RWPRO,
SBDKZ LIKE MARC-SBDKZ,
SCHGT LIKE MARC-SCHGT,
SHFLG LIKE MARC-SHFLG,
SHPRO LIKE MARC-SHPRO,
SHZET LIKE MARC-SHZET,
SOBSL LIKE MARC-SOBSL,
STRGR LIKE MARC-STRGR,
TRAME LIKE MARC-TRAME,
UEETK LIKE MARC-UEETK,
UEETO LIKE MARC-UEETO,
UMLMC LIKE MARC-UMLMC,
UNETO LIKE MARC-UNETO,
USEQU LIKE MARC-USEQU,
VINT1 LIKE MARC-VINT1,
VINT2 LIKE MARC-VINT2,
VRBDT LIKE MARC-VRBDT,
VRBFK LIKE MARC-VRBFK,
VRBMT LIKE MARC-VRBMT,
VRBWK LIKE MARC-VRBWK,
VRMOD LIKE MARC-VRMOD,
WEBAZ LIKE MARC-WEBAZ,
WERKS LIKE MARC-WERKS,
WZEIT LIKE MARC-WZEIT,
DISKZ LIKE MARD-DISKZ,
LBSTF LIKE MARD-LBSTF,
LGORT LIKE MARD-LGORT,
LMINB LIKE MARD-LMINB,
LSOBS LIKE MARD-LSOBS,
MAKTX LIKE MAKT-MAKTX,
END OF IT_FINAL0.
data : BEGIN OF IT_FINAL occurs 0,
MATNR LIKE MARA-MATNR,
MATKL LIKE MARA-MATKL,
MEINS LIKE MARA-MEINS,
MTART LIKE MARA-MTART,
AHDIS LIKE MARC-AHDIS,
AUSDT LIKE MARC-AUSDT,
AUTRU LIKE MARC-AUTRU,
BESKZ LIKE MARC-BESKZ,
BSTFE LIKE MARC-BSTFE,
BSTMA LIKE MARC-BSTMA,
BSTMI LIKE MARC-BSTMI,
BSTRF LIKE MARC-BSTRF,
BWSCL LIKE MARC-BWSCL,
DIBER LIKE MARC-DIBER,
DISGR LIKE MARC-DISGR,
DISLS LIKE MARC-DISLS,
DISMM LIKE MARC-DISMM,
DISPO LIKE MARC-DISPO,
DISPR LIKE MARC-DISPR,
DZEIT LIKE MARC-DZEIT,
EISBE LIKE MARC-EISBE,
EISLO LIKE MARC-EISLO,
EKGRP LIKE MARC-EKGRP,
FHORI LIKE MARC-FHORI,
FXHOR LIKE MARC-FXHOR,
KAUTB LIKE MARC-KAUTB,
KORDB LIKE MARC-KORDB,
KZAUS LIKE MARC-KZAUS,
LFGJA LIKE MARC-LFGJA,
LFMON LIKE MARC-LFMON,
LGRAD LIKE MARC-LGRAD,
LVORM LIKE MARC-LVORM,
MABST LIKE MARC-MABST,
MINBE LIKE MARC-MINBE,
MMSTA LIKE MARC-MMSTA,
MMSTD LIKE MARC-MMSTD,
MRPPP LIKE MARC-MRPPP,
MTVFP LIKE MARC-MTVFP,
NFMAT LIKE MARC-NFMAT,
PERKZ LIKE MARC-PERKZ,
PLIFZ LIKE MARC-PLIFZ,
PLVAR LIKE MARC-PLVAR,
PSTAT LIKE MARC-PSTAT,
QZGTP LIKE MARC-QZGTP,
RGEKZ LIKE MARC-RGEKZ,
RWPRO LIKE MARC-RWPRO,
SBDKZ LIKE MARC-SBDKZ,
SCHGT LIKE MARC-SCHGT,
SHFLG LIKE MARC-SHFLG,
SHPRO LIKE MARC-SHPRO,
SHZET LIKE MARC-SHZET,
SOBSL LIKE MARC-SOBSL,
STRGR LIKE MARC-STRGR,
TRAME LIKE MARC-TRAME,
UEETK LIKE MARC-UEETK,
UEETO LIKE MARC-UEETO,
UMLMC LIKE MARC-UMLMC,
UNETO LIKE MARC-UNETO,
USEQU LIKE MARC-USEQU,
VINT1 LIKE MARC-VINT1,
VINT2 LIKE MARC-VINT2,
VRBDT LIKE MARC-VRBDT,
VRBFK LIKE MARC-VRBFK,
VRBMT LIKE MARC-VRBMT,
VRBWK LIKE MARC-VRBWK,
VRMOD LIKE MARC-VRMOD,
WEBAZ LIKE MARC-WEBAZ,
WERKS LIKE MARC-WERKS,
WZEIT LIKE MARC-WZEIT,
DISKZ LIKE MARD-DISKZ,
LBSTF LIKE MARD-LBSTF,
LGORT LIKE MARD-LGORT,
LMINB LIKE MARD-LMINB,
LSOBS LIKE MARD-LSOBS,
MAKTX LIKE MAKT-MAKTX,
BKLAS LIKE MBEW-BKLAS,
SALK3 LIKE MBEW-SALK3,
PEINH LIKE MBEW-PEINH,
STPRS LIKE MBEW-STPRS,
VERPR LIKE MBEW-VERPR,
VPRSV LIKE MBEW-VPRSV,
ZXPRS LIKE MBEW-STPRS,
END OF IT_FINAL.
data : BEGIN OF IT_display occurs 0,
matnr LIKE MARA-MATNR,
maktx LIKE MAKT-MAKTX,
meins LIKE MARA-MEINS,
werks LIKE MARC-WERKS,
dispo LIKE MARC-DISPO,
dismm LIKE MARC-DISMM,
plifz LIKE MARC-PLIFZ,
webaz LIKE MARC-WEBAZ,
minbe LIKE MARC-MINBE,
shzet LIKE MARC-SHZET,
eisbe LIKE MARC-EISBE,
disls LIKE MARC-DISLS,
bstmi LIKE MARC-BSTMI,
bstma LIKE MARC-BSTMA,
bstfe LIKE MARC-BSTFE,
ZXPRS LIKE MBEW-STPRS,
peinh LIKE MBEW-PEINH,
salk3 LIKE MBEW-SALK3,
end of it_display.
ALV Layout Variant
AT SELECTION-SCREEN ON VALUE-REQUEST FOR so_lay.
PERFORM get_alv_layout_values.
SELECTION SCREEN.
AT SELECTION-SCREEN.
IF ( sscrfields-ucomm = 'SJOB' OR
sy-batch = 'X' ).
s_job = 'X'.
ENDIF.
select single matnr into itab from mara where matnr in so_matnr.
if sy-subrc <> 0.
message e001(zpal).
endif.
START-OF-SELECTION.
IF SO_LAY <> ' '.
VARIANT-REPORT = 'ZPMACR01_MD_MRP_100'.
VARIANT-VARIANT = SO_LAY.
else.
VARIANT-VARIANT = '/DEFAULT'.
ENDIF.
INITIALIZATION.
W_REPID = SY-REPID.
START-OF-SELECTION.
IF SO_LAY <> ' '.
VARIANT-REPORT = w_repid.
VARIANT-VARIANT = SO_LAY.
else.
VARIANT-VARIANT = '/DEFAULT'.
ENDIF.
SELECT
MARA~MATNR
MARA~MATKL
MARA~MEINS
MARA~MTART
MARC~AHDIS
MARC~AUSDT
MARC~AUTRU
MARC~BESKZ
MARC~BSTFE
MARC~BSTMA
MARC~BSTMI
MARC~BSTRF
MARC~BWSCL
MARC~DIBER
MARC~DISGR
MARC~DISLS
MARC~DISMM
MARC~DISPO
MARC~DISPR
MARC~DZEIT
MARC~EISBE
MARC~EISLO
MARC~EKGRP
MARC~FHORI
MARC~FXHOR
MARC~KAUTB
MARC~KORDB
MARC~KZAUS
MARC~LFGJA
MARC~LFMON
MARC~LGRAD
MARC~LVORM
MARC~MABST
MARC~MINBE
MARC~MMSTA
MARC~MMSTD
MARC~MRPPP
MARC~MTVFP
MARC~NFMAT
MARC~PERKZ
MARC~PLIFZ
MARC~PLVAR
MARC~PSTAT
MARC~QZGTP
MARC~RGEKZ
MARC~RWPRO
MARC~SBDKZ
MARC~SCHGT
MARC~SHFLG
MARC~SHPRO
MARC~SHZET
MARC~SOBSL
MARC~STRGR
MARC~TRAME
MARC~UEETK
MARC~UEETO
MARC~UMLMC
MARC~UNETO
MARC~USEQU
MARC~VINT1
MARC~VINT2
MARC~VRBDT
MARC~VRBFK
MARC~VRBMT
MARC~VRBWK
MARC~VRMOD
MARC~WEBAZ
MARC~WERKS
MARC~WZEIT
MARD~DISKZ
MARD~LBSTF
MARD~LGORT
MARD~LMINB
MARD~LSOBS
MAKT~MAKTX
INTO TABLE IT_TABLE
FROM MARA INNER JOIN MARC ON MARAMATNR = MARCMATNR
INNER JOIN MAKT ON MARAMATNR = MAKTMATNR
WHERE MARA~MATNR IN SO_MATNR
AND MARC~WERKS IN SO_WERKS
AND MAKT~SPRAS IN SO_SPRAS.
SELECT
MARA~MATNR
MARA~MATKL
MARA~MEINS
MARA~MTART
MARD~DISKZ
MARD~LBSTF
MARD~LGORT
MARD~LMINB
MARD~LSOBS
INTO TABLE IT_mard
FROM MARA INNER JOIN MARD ON MARAMATNR = MARDMATNR
WHERE MARA~MATNR IN SO_MATNR
and mard~werks in SO_WERKS.
SELECT MATNR BKLAS SALK3 PEINH STPRS VERPR VPRSV
INTO TABLE IT_MBEW FROM MBEW FOR ALL ENTRIES IN IT_TABLE WHERE MATNR =
IT_TABLE-MATNR AND BWKEY IN SO_BWKEY.
LOOP AT IT_TABLE.
MOVE-CORRESPONDING IT_TABLE TO IT_FINAL0.
READ TABLE IT_MARD WITH KEY MATNR = IT_TABLE-MATNR.
IF SY-SUBRC = 0 .
MOVE-CORRESPONDING IT_MARD TO IT_FINAL0.
ENDIF.
APPEND IT_FINAL0.
CLEAR IT_FINAL0.
ENDLOOP.
LOOP AT IT_FINAL0.
READ TABLE IT_MBEW WITH KEY MATNR = IT_final0-MATNR.
IF SY-SUBRC = 0 .
MOVE-CORRESPONDING IT_MBEW TO IT_FINAL.
IF IT_MBEW-VPRSV = 'S'.
MOVE IT_MBEW-STPRS TO IT_FINAL-ZXPRS.
ELSE.
MOVE IT_MBEW-VERPR TO IT_FINAL-ZXPRS.
ENDIF.
ENDIF.
MOVE-CORRESPONDING IT_FINAL0 TO IT_FINAL.
APPEND IT_FINAL.
CLEAR IT_FINAL.
ENDLOOP.
Default Layout
LOOP AT IT_FINAL.
Read table it_final with key matnr = SO_matnr.
Move it_final-MATNR to it_display-MATNR.
Move it_final-MAKTX to it_display-MAKTX.
Move it_final-MEINS to it_display-MEINS.
Move it_final-WERKS to it_display-WERKS.
Move it_final-DISPO to it_display-DISPO.
Move it_final-DISMM to it_display-DISMM.
Move it_final-PLIFZ to it_display-PLIFZ.
Move it_final-WEBAZ to it_display-WEBAZ.
Move it_final-MINBE to it_display-MINBE.
Move it_final-SHZET to it_display-SHZET.
Move it_final-EISBE to it_display-EISBE.
Move it_final-DISLS to it_display-DISLS.
Move it_final-BSTMI to it_display-BSTMI.
Move it_final-BSTMA to it_display-BSTMA.
Move it_final-BSTFE to it_display-BSTFE.
MOVE it_final-ZXPRS to it_display-ZXPRS.
Move it_final-PEINH to it_display-PEINH.
Move it_final-SALK3 to it_display-SALK3.
Append it_display.
endloop.
data: v_data type c value ' '.
if it_display is initial.
v_data = ' '.
else.
v_data = 'X'.
endif.
END-OF-SELECTION.
END-OF-SELECTION.
if s_job = 'X'.
perform execute_back.
else.
perform execute_fore.
endif.
FORM execute_fore *
Form execute_fore.
*& Form REUSE_ALV_FIELDCATALOG_MERGE
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = W_REPID
I_INTERNAL_TABNAME = 'IT_FINAL'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = W_REPID
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
CT_FIELDCAT = IT_FIELDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
*IF SO_LAY <> ' '.
VARIANT-VARIANT = SO_LAY.
*endif.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = W_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = IT_LAYOUT
IT_FIELDCAT = IT_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'X'
IS_VARIANT = VARIANT
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
FORM execute_back *
FORM execute_back.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = W_REPID
I_INTERNAL_TABNAME = 'IT_FINAL'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = W_REPID
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
CT_FIELDCAT = IT_FIELDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = W_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = it_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'X'
IS_VARIANT = variant
IT_EVENTS = gt_events[]
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = it_final
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
*IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
endform.
form top_of_page.
CALL FUNCTION 'REUSE_ALV_GRID_LAYOUT_INFO_GET'
IMPORTING
ES_LAYOUT =
ET_FIELDCAT = IT_FIELDCAT3[]
ET_SORT =
ET_FILTER =
ES_GRID_SCROLL =
ES_VARIANT = VARIANT
ET_MARKED_COLUMNS =
ET_FILTERED_ENTRIES =
ET_FIELDCAT_BACKEND =
ES_PRINT =
EXCEPTIONS
NO_INFOS = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
clear count.
LOOP AT IT_FIELDCAT3 into is_fieldcat3 where no_out eq space.
*move-corresponding is_fieldcat3 to is_fieldcat2.
move: is_fieldcat3-fieldname to is_fieldcat2-fieldname,
is_fieldcat3-ref_fieldname to is_fieldcat2-ref_field,
is_fieldcat3-ref_tabname to is_fieldcat2-ref_table,
is_fieldcat3-seltext_l to is_fieldcat2-coltext,
is_fieldcat3-no_out to is_fieldcat2-no_out,
is_fieldcat3-col_pos to is_fieldcat2-col_pos.
*move:
is_fieldcat3-row_pos to is_fieldcat2-row_pos,
is_fieldcat3-col_pos to is_fieldcat2-col_pos,
is_fieldcat3-fieldname to is_fieldcat2-fieldname,
is_fieldcat3-tabname to is_fieldcat2-tabname,
is_fieldcat3-outputlen to is_fieldcat2-outputlen,
is_fieldcat3-no_out to is_fieldcat2-no_out,
is_fieldcat3-seltext_l to is_fieldcat2-coltext,
is_fieldcat3-ref_fieldname to is_fieldcat2-ref_field,
is_fieldcat3-ref_tabname to is_fieldcat2-ref_table,
is_fieldcat3-DDIC_OUTPUTLEN to is_fieldcat2-DD_OUTLEN,
is_fieldcat3-datatype to is_fieldcat2-datatype,
is_fieldcat3-inttype to is_fieldcat2-inttype,
is_fieldcat3-INTLEN to is_fieldcat2-INTLEN.
APPEND IS_FIELDCAT2 TO IT_FIELDCAT2.
*count = count + 1.
ENDLOOP.
loop at it_fieldcat2 into is_fieldcat2.
if is_fieldcat2-no_out = 'X'.
delete it_fieldcat2 index sy-tabix.
else.
count = count + 1.
endif.
endloop.
describe table it_fieldcat2 lines count.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat2[]
IMPORTING
ep_table = new_table.
ASSIGN new_table->* TO <tab>.
CREATE DATA new_line LIKE LINE OF <tab>.
ASSIGN new_line->* TO <wa>.
*-- Perform to build table for attachment data
PERFORM build_xls_data_table.
*-- Perform to populate e-mail message
PERFORM populate_email_message_body.
*-- Perform to send mail
PERFORM send_file_as_email_attachment.
*-- Perform to Instruct mail send program for SAPCONNECT to send email.
PERFORM initiate_mail_execute_program.
ENDFORM.
*& Form build_xls_data_table
form build_xls_data_table.
data: char_var(30) type C,
num_var(10) type n.
CONSTANTS: con_cret TYPE x VALUE '0D', "NEW LINE
tabchar TYPE x VALUE '09'. "tab
loop at it_fieldcat2 into is_fieldcat2.
concatenate it_attach is_fieldcat2-coltext
into it_attach separated by tabchar.
endloop.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
CLEAR it_attach.
field-symbols: <t> type ANY.
LOOP AT it_final.
col_1 = 1.
do count times.
Assign component col_1 of structure <wa> to <f>.
read table it_fieldcat2 into is_fieldcat2 with key col_pos = col_1.
loop at it_fieldcat into is_fieldcat.
if is_fieldcat-fieldname = is_fieldcat2-fieldname.
assign component is_fieldcat-col_pos of structure it_final to <t>.
exit.
endif.
endloop.
<f> = <t>.
clear <t>.
col_1 = col_1 + 1.
enddo.
append <wa> to <tab>.
endloop.
loop at <tab> into <wa>.
col_1 = 1.
do count times.
Assign component col_1 of structure <wa> to <f>.
move <f> to char_var.
concatenate it_attach char_var
into it_attach separated by tabchar.
col_1 = col_1 + 1.
enddo.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
CLEAR it_attach.
endloop.
ENDFORM.
FORM send_file_as_email_attachment.
DATA:
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ.
ld_email = p_email.
ld_mtitle = text-003.
ld_format = 'XLS'.
ld_attdescription = ' '.
ld_attfilename = 'DATA'.
ld_sender_address = ' '.
ld_sender_address_type = ' '.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
LOOP AT it_attach.
MOVE it_attach(255) TO t_hex.
APPEND t_hex.
MOVE it_attach+255(255) TO t_hex.
APPEND t_hex.
MOVE it_attach+510(255) TO t_hex.
APPEND t_hex.
MOVE it_attach+765(235) TO t_hex.
APPEND t_hex.
MOVE it_attach+765(255) TO t_hex.
APPEND t_hex.
MOVE it_attach+1020(255) TO t_hex.
APPEND t_hex.
MOVE it_attach+1275(255) TO t_hex.
APPEND t_hex.
MOVE it_attach+1530(255) TO t_hex.
APPEND t_hex.
MOVE it_attach+1785(255) TO t_hex.
APPEND t_hex.
MOVE it_attach+2040(255) TO t_hex.
APPEND t_hex.
MOVE it_attach+2295(255) TO t_hex.
APPEND t_hex.
MOVE it_attach+2550(100) TO t_hex.
APPEND t_hex.
ENDLOOP.
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_hex LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_txt = it_message
contents_hex = t_hex
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ld_error = sy-subrc.
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM. "SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
FORM populate_email_message_body.
REFRESH it_message.
it_message = text-004.
APPEND it_message.
CONCATENATE SY-DATUM 'to' SY-DATUM INTO it_message SEPARATED BY
space.
APPEND it_message.
ENDFORM. " POPULATE_EMAIL_MESSAGE_BODY
*& Form get_alv_layout_values
FORM get_alv_layout_values.
variant-report = w_repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = variant
i_save = 'A'
IMPORTING
es_variant = variant
EXCEPTIONS
not_found = 1
program_error = 2
OTHERS = 3.
CHECK sy-subrc = 0.
so_lay = variant-variant.
ENDFORM. " get_alv_layout_valuesHi Arpit,
Take a look at the documentation of FM 'SO_DOCUMENT_SEND_API1' for parameter PACKING_LIST. I think you should set t_packing_list-head_num to a different value than 0 for the second attachment.
Regards,
John.
Maybe you are looking for
-
How do I get ADSL2+ (Up to 20MB)
I've been on BT Broadband forever and Broadband Anywhere for just about 18 months (contract ends this month, I think!). Try as I may I cannot find a way through any BT.com web page that will allow me to upgrade from 8MB max to 20MB max, despite the
-
Event flow in ABAP is different when executed via SE80 vs. via TCODE
Hi, We have many existing custom ABAP report pgms that have a custom transaction code that executes them. Regardless of how the pgms are invoked, the event sequence in the pgm is INITIALIZATION, AT SELECTION-SCREEN, START-OF-SELECTION. etc. Now, wh
-
Select and edit text Adobe Reader 8.1.2 & Mac OS10.5
How does one select and edit text in a PDF Adobe Read document with Mac OS 10.5? Step by step directions would be appreciated.
-
Can I use StyleWriter II with my notebook?
I have got an old printer StyleWriter II, can I use it with my notebook(not Mac, Windows System XP, AMD Turion Processor)? if can, where can I get the drives and which kind of cables to use to connect to computer and also the power cable?
-
What has happened to the iPad 2 finger select and drag technique? Since upgrading to iOS7 it does not work? I used this all the time to select multple images, approx 75 from an SD card containing 1000 images. Its painful indvidually selecting the i