Background job taking more time.
Hi All,
I have a background job for standard program RBDAPP01 which is scheduled to run after every 3 minutes.
The problem is that it takes very long time at particular time everyday.
Like normally it take 1 or 2 second.
But at 11.14 it takes approx 1500 seconds to execute.
Can anybody help me about what may be the reason for this?
Regards,
VIkas Maurya
has it been sucessfully executed..if not then there must be an open loop in the back ground program. Generally a open loop is put in the program for debugging purpose in background programs, if its not removed, the program gets stuck....
Or if it has been executed successfully...then u have to check the performance...u can make use of st05 or se30..for the same..
Similar Messages
-
Issue with background job--taking more time
Hi,
We have a custom program which runs as the background job. It runs every 2 hours.
Itu2019s taking more time than expected on ECC6 SR2 & SR3 on Oracle 10.2.0.4. We found that it taking more time while executing native SQL on DBA_EXTENTS. When we tried to fetch less number of records from DBA_EXTENTS, it works fine.
But we need the program to fetch all the records.
But it works fine on ECC5 on 10.2.0.2 & 10.2.0.4.
Here is the SQL statement:
EXEC SQL PERFORMING SAP_GET_EXT_PERF.
SELECT OWNER, SEGMENT_NAME, PARTITION_NAME,
SEGMENT_TYPE, TABLESPACE_NAME,
EXTENT_ID, FILE_ID, BLOCK_ID, BYTES
FROM SYS.DBA_EXTENTS
WHERE OWNER LIKE 'SAP%'
INTO
: EXTENTS_TBL-OWNER, :EXTENTS_TBL-SEGMENT_NAME,
:EXTENTS_TBL-PARTITION_NAME,
:EXTENTS_TBL-SEGMENT_TYPE , :EXTENTS_TBL-TABLESPACE_NAME,
:EXTENTS_TBL-EXTENT_ID, :EXTENTS_TBL-FILE_ID,
:EXTENTS_TBL-BLOCK_ID, :EXTENTS_TBL-BYTES
ENDEXEC.
Can somebody suggest what has to be done?
Has something changed in SAP7 (wrt background job etc) or do we need to fine tune the SQL statement?
Regards,
VivdhaHi,
there was an issue with LMT's but that was fixed in 10.2.0.4
besides missing system statistics:
But WHY do you collect every 2 hours this information? The dba_extents view is based on really heavy used system tables.
Normally , you would start queries of this type against dba_extents ie. to identify corrupt blocks and such:
SELECT owner , segment_name , segment_type
FROM dba_extents
WHERE file_id = &AFN
AND &BLOCKNO BETWEEN block_id AND block_id + blocks -1
Not sure what you want to achieve with it.
There are monitoring tools (OEM ?) around that may cover your needs.
Bye
yk -
Dear Folks,
We run the MRP at MRP area level with total 72 plants..Normally this job takes 3 to 4 hour to complete...but suddenly since last two weeks it is taking more than 9 hours. with this delaying business is getting problem to send the scheudles at proper time and becomes critical issue.
Now anybody have idea to check the root causes of this delay? And how to reduce the time... We have already processing this job with parallel processing.
Reasonable answer will get full points.
Regards
TAJUDDINHi TAJUDDIN
Unfortunately, I do not have any documents related to parallel processing.
But I can explain how to do, So I hope following explanation help you.
1. At first you need to check whether current parallel MRP works fine or not.
To do this, please check MRP result in the spool.
(In the last page of spool, you can see the result task use of each WP.
To open last page of spool, just go to SM37 and find MRP job and then
press spool button. Now you will see spool overview. But before open
spool please change page setting that you will see.
<From the menu, Goto=>Display request=>Setting> Then select last
10 page. By doing this operation, you can see last 10 page.
2.In the button of the spool page, you will see task use of MRP.
For example. if you use 2 application servers and each application server,
if you assign 3 work process, you will see 6 task.
Number of calculated item Runtime
AP1 WP1 1000 30 min
AP1 WP2 500 5 min
AP1 WP3 200 3 min
AP2 WP1 200 3 min
AP2 WP2 200 3 min
AP2 WP3 100 2 min
In the log, if you observed above situation, this indicate unbalanced system use.
(This situation occur depending on your BOM structure). So there is a possibility
that dispatching system use more equally improve MRP performance.
To do equal dispatch, you need to de-activate MRP package logic to bottlneck
Lowlevel code.(You can see bottlneck item in the spool. So if you observe
10 items belongs to lowlevel code 5, it is better to deactivate package logic
for lowlevel code 5. Then for this lowlevel code, no package logic works and this
bring to equal distribution of task use).
The way to de-activate is described in SAP Note 568593 and 52033
(Until 46C, you need to use modification <manual change coding>. From
Enterprise, you can use BADI).
Regarding on package logic, I recommned you to read SAP Note 52033
(Depending on runtime of former task, MRP combine several item into 1 package.
So if task 1 finish previous MRP around 60 sec, next MRP for this task will contain
more material <package comes to contain more material>. But if bottlneck items
are put in togather in 1 package, this task 1 might take more longer time
cpmpared to others. And MRP calculation occur low level code by low level
code. So if this task 1 does not finish calculation < other task already finish
MRP calculation>, other task cannot start MRP for next lowlevel. So other task
have to wait until task 1 finish his MRP. Due to this, you will see big task usage
and runtime difference in spool).
But this behavior depend on BOM structure. So you also have possibility not to see
this behavior in your spool. In this case, no necessity to consider balancing..
I hope this help you.
best regards
Keiji -
BW Job Taking more time than normal execution time
Hi,
Customer is trying to extract data from R/3 with BW OCPA Extractor.
Selections within Infopackage under tab Data Selection are
0FISCPER = 010.2000
ZVKORG = DE
Then it is scheduled (Info Package), after this monitor button is selected for the scheduled date and time, which gathers information from R/3 system is taking approximately 2 hours which used to take normally minutes.
This is pulling data from R/3 which is updating PSA, the concern is the time taken for pulling data from R/3 to BW.
If any input is required please let me know and the earliest solution is appreciated.
Thanks
VijayHi Vijay,
If you think the data transfer is the problem (i.e. extractor runs for a long time), try and locate the job on R/3 side using SM37 (user ALEREMOTE) or look in SM50 to see of extraction is still running.
You can also test the extraction in R/3 using tcode RSA3 and use same selection-criteria.
If this goes fast (as expected) the problem must be on BW side. Another thing you can do is check if a shortdump occurred in either R/3 or BW -> tcode ST22. This will often keep the traffic light on yellow.
Hope this helps to solve your problem.
Grtx,
Marco -
Transport released it taking more time
Hi Every One,
As i want to transport the program with teir package , smartforms etc.
I created one transport request with transport of copies and include all package in that and released
Its taking more time
Status in the se01 showing request is released
log shows
Checks at Operating System Level 23.04.2010 12:45:48 (0) Successfully Completed
Pre-Export Methods 23.04.2010 12:45:54 (0) Successfully Completed
Checks at Operating System Level 23.04.2010 12:47:23 (0) Successfully Completed
Pre-Export Methods 23.04.2010 12:47:27 (4) Ended with Warning
Export 23.04.2010 15:28:29 Not yet executed
RDDIMPDP program is running parallel in background.
So what i have to check any suggestions please
Regards
ShashiHi Niraj,
i sheduled RDDIMPDP job for every 2 minute and it is running fine
what i done is i created another request and transported. its went fine and issue is solved.
but this request is still showing as before now i want to ckear this. how i can do this. shall i delete this request directly.. Any problem with this
I am pasting Log report last few lines
WARNING:
sapprd\sapmnt\trans\tmp\TRPKK900160.TRP is already in use (10), I'm waiting 4 sec (20100423124802). My name: pid 3788 on sapprd (APServiceTRP)
WARNING:
sapprd\sapmnt\trans\tmp\TRPKK900160.TRP is already in use (20), I'm waiting 1 sec (20100423124826). My name: pid 3788 on sapprd (APServiceTRP)
WARNING:
sapprd\sapmnt\trans\tmp\TRPKK900160.TRP is already in use (30), I'm waiting 4 sec (20100423124850). My name: pid 3788 on sapprd (APServiceTRP)
START INFORM SAP-SYSTEM OF TRP Q 20100423155230 BIPLAB sapprd 20100423155222
START tp_getprots TRP Q 20100423155230 BIPLAB sapprd 20100423155222
STOP tp_getprots TRP Q 20100423155240 BIPLAB sapprd 20100423155222
STOP INFORM SAP-SYSTEM OF TRP Q 20100423155240 BIPLAB sapprd 20100423155222
Regards
Shashi -
Index Deletion taking more time
Dear BWers,
I am facing a problem with Index deletion of some of the cubes (total 10). Two weeks back index deletion of all the cubes used to complete in less time. But from the last two weeks, index deletion process is taking more time, almost triple the time it used to take.
Any idea why this could have happened or any pointers to documents on improving the time taken by index deletion processes will be highly appreciated and will also be rewarded.
Thanks in advance.
MadhavMadhav,
Make sure you required Background Process available.
One more thing... you can ask your DBA/Basis folks to look into it. They can tell you what is happening at the DB Level.
You try to analyze that from SM51.
Nagesh Ganisetti.
Assign points if it helps. -
Essbase Model taking more time
HI,
I am trying to create a essbase model in ODI. But it is taking more time. The status in operator , execution tab showing Running. I waited more than half of the day.
Colud any one help on this.
Regards
KumarKJohn ,
Could you please tell me what is the reason to make the reverse engineer process is working better when using agent ?
KumarK ,
I notice that sometimes when you reverse model from essbase to ODI it appear to have a LOCK process on ODI Work Repository.
thing that you need to do is stop that job in the operator by right click on it and choose stop.
I don't know why does this situation happen.
May be it is just a bug or something.
May be john has a reason that why using agent do the reverse engineering is better than local(no agent) ?
Thanks -
Source System Extraction taking more time
Hi All,
I Have an Issue, please help me out in this.
We have two source systems in our process. One is working fine. We dont have any issue with that. But another source system taking more time to extract the data in the source system than usual. From few days only we are facing this problem. Record count is also normal. I am unable find root cause for this, please help me out regarding this issue.
It is Full update. We are using Custom program to extract the data. It is running daily.
Thanks in Advance.
Regards,
Suresh
Edited by: sureshd on Jul 14, 2011 6:04 PM
Edited by: sureshd on Jul 14, 2011 6:05 PMWhen a long running job is running in the source system side you can trace it through ST05. Simultaneously you can monitor the screen of SM50/SM66 to see what are the tables being accessed during the job.
After the loading is completed, you can deactivate the trace and then go to the Display trace option where you would see various number of SQL statements along with their tables. Check which particular statement is an expensive one by looking at the time stamp.
Then next job is to decide why that table is being accessed for so much of time and how to improve the run time of the table. check the fields inside the table and their selectivity and see wether any index already exist on that. You can do this by going into SE11. If index is not available on those specific fields ask your Basis Guy to create a secondary one on top of it which may help in better performance. hope it helps. -
Deletion of Data Mart Request taking more time
Hi all,
One of the Data Mart process(ODS to Infocube) has failed.
Im not able to delete the request in Infocube.
When delete option executed, its taking more time while im monitoring that job in SM37 and its not getting completed.
The details seen in the Job Log is as shown below,
Job started
Step 001 started (program RSDELPART1, variant &0000000006553, user ID SSRIN90)
Delete is running: Data target BUS_CONT, from 376,447 to 376,447
Please let me know your suggestions.
Thanks,
SowrabhHi,
How many records are there in that request. Usually when you try to delete out a request it takes more time. Depending on the data volume in the request the deletion time will vary.
Give it some more time and see if it finishes. To actually know if the job is doing anything, goto SM50/51 and look at whats happening.
Cheers,
Kedar -
MRP job takes more time (Duration / Sec)
Hello PP Guru’s,
I have below situation in production environment,
MRP job for plant – A (Takes more time – 14.650)
MRP job for plant – B (Takes less time – 4.512)
When I compare the variant / attributes with plant A and B, I observe only difference in attribute is scheduling (2 - Lead Time Scheduling and Capacity Planning) for plant A.
For plant B scheduling (1- Determination of Basic Dates for Planned) it was updated.
So in my observation this scheduling is playing a major role for MRB job which takes more time in plant – A.
I am in process of changing the variant attribute for plant – A from scheduling 2 to scheduling 1.
I wanted to know from experts whether if I change any impact / problem will happen in future for plant A or not.
Please let me know what all the hidden impacts are there if I change the scheduling in variant attribute.
I look forward to your valuable input to reduce time for my MRP related job.
Regards,
Kumar SHi Kumar,
You have no need to change the inhouse production time you just need to update the Lot size dependent inhouse production time in work scheduling view of material master. That you can do by scheduling the routing/recipe.
Transactions CA97 or CA97N can be used to update the in-house production time with the information from the routing.
If business don't want to have the capacity planning for planned orders then you change the scheduling from 2 to 1 basic date scheduling.
Expert Caetano already answer you query
The reports listed below can be used to compare the MRP past executions regarding the runtime:
RMMDMONI: This report compares the runtime of the MRP execution and also provides the total of planning elements (planned orders, purchase requisitions, etc) changed, created or deleted. It also shows which planning parameters where used and how much time MRP spent on each step (database read, BOM explosion, MRP calculation, scheduling, BAdIs, etc). With this information is possible to observe the relation of runtime and number of elements changed/created/deleted and also to see on which step MRP is taking more time.
RMMDPERF: This report shows the "material hit list", that means, which materials had the highest runtime during the MRP execution and also on which step MRP is taking more time. Knowing which materials have the highest runtime, allow you to isolate the problem and reproduce it on MD03, where it is possible to run an ABAP or SQL trace for a more detailed analysis.
Regards,
R.Brahmankar -
Query in timesten taking more time than query in oracle database
Hi,
Can anyone please explain me why query in timesten taking more time
than query in oracle database.
I am mentioning in detail what are my settings and what have I done
step by step.........
1.This is the table I created in Oracle datababase
(Oracle Database 10g Enterprise Edition Release 10.2.0.1.0)...
CREATE TABLE student (
id NUMBER(9) primary keY ,
first_name VARCHAR2(10),
last_name VARCHAR2(10)
2.THIS IS THE ANONYMOUS BLOCK I USE TO
POPULATE THE STUDENT TABLE(TOTAL 2599999 ROWS)...
declare
firstname varchar2(12);
lastname varchar2(12);
catt number(9);
begin
for cntr in 1..2599999 loop
firstname:=(cntr+8)||'f';
lastname:=(cntr+2)||'l';
if cntr like '%9999' then
dbms_output.put_line(cntr);
end if;
insert into student values(cntr,firstname, lastname);
end loop;
end;
3. MY DSN IS SET THE FOLLWING WAY..
DATA STORE PATH- G:\dipesh3repo\db
LOG DIRECTORY- G:\dipesh3repo\log
PERM DATA SIZE-1000
TEMP DATA SIZE-1000
MY TIMESTEN VERSION-
C:\Documents and Settings\dipesh>ttversion
TimesTen Release 7.0.3.0.0 (32 bit NT) (tt70_32:17000) 2007-09-19T16:04:16Z
Instance admin: dipesh
Instance home directory: G:\TimestTen\TT70_32
Daemon home directory: G:\TimestTen\TT70_32\srv\info
THEN I CONNECT TO THE TIMESTEN DATABASE
C:\Documents and Settings\dipesh> ttisql
command>connect "dsn=dipesh3;oraclepwd=tiger";
4. THEN I START THE AGENT
call ttCacheUidPwdSet('SCOTT','TIGER');
Command> CALL ttCacheStart();
5.THEN I CREATE THE READ ONLY CACHE GROUP AND LOAD IT
create readonly cache group rc_student autorefresh
interval 5 seconds from student
(id int not null primary key, first_name varchar2(10), last_name varchar2(10));
load cache group rc_student commit every 100 rows;
6.NOW I CAN ACCESS THE TABLES FROM TIMESTEN AND PERFORM THE QUERY
I SET THE TIMING..
command>TIMING 1;
consider this query now..
Command> select * from student where first_name='2155666f';
< 2155658, 2155666f, 2155660l >
1 row found.
Execution time (SQLExecute + Fetch Loop) = 0.668822 seconds.
another query-
Command> SELECT * FROM STUDENTS WHERE FIRST_NAME='2340009f';
2206: Table SCOTT.STUDENTS not found
Execution time (SQLPrepare) = 0.074964 seconds.
The command failed.
Command> SELECT * FROM STUDENT where first_name='2093434f';
< 2093426, 2093434f, 2093428l >
1 row found.
Execution time (SQLExecute + Fetch Loop) = 0.585897 seconds.
Command>
7.NOW I PERFORM THE SIMILAR QUERIES FROM SQLPLUS...
SQL> SELECT * FROM STUDENT WHERE FIRST_NAME='1498671f';
ID FIRST_NAME LAST_NAME
1498663 1498671f 1498665l
Elapsed: 00:00:00.15
Can anyone please explain me why query in timesten taking more time
that query in oracle database.
Message was edited by: Dipesh Majumdar
user542575
Message was edited by:
user542575TimesTen
Hardware: Windows Server 2003 R2 Enterprise x64; 8 x Dual-core AMD 8216 2.41GHz processors; 32 GB RAM
Version: 7.0.4.0.0 64 bit
Schema:
create usermanaged cache group factCache from
MV_US_DATAMART
ORDER_DATE DATE,
IF_SYSTEM VARCHAR2(32) NOT NULL,
GROUPING_ID TT_BIGINT,
TIME_DIM_ID TT_INTEGER NOT NULL,
BUSINESS_DIM_ID TT_INTEGER NOT NULL,
ACCOUNT_DIM_ID TT_INTEGER NOT NULL,
ORDERTYPE_DIM_ID TT_INTEGER NOT NULL,
INSTR_DIM_ID TT_INTEGER NOT NULL,
EXECUTION_DIM_ID TT_INTEGER NOT NULL,
EXEC_EXCHANGE_DIM_ID TT_INTEGER NOT NULL,
NO_ORDERS TT_BIGINT,
FILLED_QUANTITY TT_BIGINT,
CNT_FILLED_QUANTITY TT_BIGINT,
QUANTITY TT_BIGINT,
CNT_QUANTITY TT_BIGINT,
COMMISSION BINARY_FLOAT,
CNT_COMMISSION TT_BIGINT,
FILLS_NUMBER TT_BIGINT,
CNT_FILLS_NUMBER TT_BIGINT,
AGGRESSIVE_FILLS TT_BIGINT,
CNT_AGGRESSIVE_FILLS TT_BIGINT,
NOTIONAL BINARY_FLOAT,
CNT_NOTIONAL TT_BIGINT,
TOTAL_PRICE BINARY_FLOAT,
CNT_TOTAL_PRICE TT_BIGINT,
CANCELLED_ORDERS_COUNT TT_BIGINT,
CNT_CANCELLED_ORDERS_COUNT TT_BIGINT,
ROUTED_ORDERS_NO TT_BIGINT,
CNT_ROUTED_ORDERS_NO TT_BIGINT,
ROUTED_LIQUIDITY_QTY TT_BIGINT,
CNT_ROUTED_LIQUIDITY_QTY TT_BIGINT,
REMOVED_LIQUIDITY_QTY TT_BIGINT,
CNT_REMOVED_LIQUIDITY_QTY TT_BIGINT,
ADDED_LIQUIDITY_QTY TT_BIGINT,
CNT_ADDED_LIQUIDITY_QTY TT_BIGINT,
AGENT_CHARGES BINARY_FLOAT,
CNT_AGENT_CHARGES TT_BIGINT,
CLEARING_CHARGES BINARY_FLOAT,
CNT_CLEARING_CHARGES TT_BIGINT,
EXECUTION_CHARGES BINARY_FLOAT,
CNT_EXECUTION_CHARGES TT_BIGINT,
TRANSACTION_CHARGES BINARY_FLOAT,
CNT_TRANSACTION_CHARGES TT_BIGINT,
ORDER_MANAGEMENT BINARY_FLOAT,
CNT_ORDER_MANAGEMENT TT_BIGINT,
SETTLEMENT_CHARGES BINARY_FLOAT,
CNT_SETTLEMENT_CHARGES TT_BIGINT,
RECOVERED_AGENT BINARY_FLOAT,
CNT_RECOVERED_AGENT TT_BIGINT,
RECOVERED_CLEARING BINARY_FLOAT,
CNT_RECOVERED_CLEARING TT_BIGINT,
RECOVERED_EXECUTION BINARY_FLOAT,
CNT_RECOVERED_EXECUTION TT_BIGINT,
RECOVERED_TRANSACTION BINARY_FLOAT,
CNT_RECOVERED_TRANSACTION TT_BIGINT,
RECOVERED_ORD_MGT BINARY_FLOAT,
CNT_RECOVERED_ORD_MGT TT_BIGINT,
RECOVERED_SETTLEMENT BINARY_FLOAT,
CNT_RECOVERED_SETTLEMENT TT_BIGINT,
CLIENT_AGENT BINARY_FLOAT,
CNT_CLIENT_AGENT TT_BIGINT,
CLIENT_ORDER_MGT BINARY_FLOAT,
CNT_CLIENT_ORDER_MGT TT_BIGINT,
CLIENT_EXEC BINARY_FLOAT,
CNT_CLIENT_EXEC TT_BIGINT,
CLIENT_TRANS BINARY_FLOAT,
CNT_CLIENT_TRANS TT_BIGINT,
CLIENT_CLEARING BINARY_FLOAT,
CNT_CLIENT_CLEARING TT_BIGINT,
CLIENT_SETTLE BINARY_FLOAT,
CNT_CLIENT_SETTLE TT_BIGINT,
CHARGEABLE_TAXES BINARY_FLOAT,
CNT_CHARGEABLE_TAXES TT_BIGINT,
VENDOR_CHARGE BINARY_FLOAT,
CNT_VENDOR_CHARGE TT_BIGINT,
ROUTING_CHARGES BINARY_FLOAT,
CNT_ROUTING_CHARGES TT_BIGINT,
RECOVERED_ROUTING BINARY_FLOAT,
CNT_RECOVERED_ROUTING TT_BIGINT,
CLIENT_ROUTING BINARY_FLOAT,
CNT_CLIENT_ROUTING TT_BIGINT,
TICKET_CHARGES BINARY_FLOAT,
CNT_TICKET_CHARGES TT_BIGINT,
RECOVERED_TICKET_CHARGES BINARY_FLOAT,
CNT_RECOVERED_TICKET_CHARGES TT_BIGINT,
PRIMARY KEY(ORDER_DATE, TIME_DIM_ID, BUSINESS_DIM_ID, ACCOUNT_DIM_ID, ORDERTYPE_DIM_ID, INSTR_DIM_ID, EXECUTION_DIM_ID,EXEC_EXCHANGE_DIM_ID),
READONLY);
No of rows: 2228558
Config:
< CkptFrequency, 600 >
< CkptLogVolume, 0 >
< CkptRate, 0 >
< ConnectionCharacterSet, US7ASCII >
< ConnectionName, tt_us_dma >
< Connections, 64 >
< DataBaseCharacterSet, AL32UTF8 >
< DataStore, e:\andrew\datacache\usDMA >
< DurableCommits, 0 >
< GroupRestrict, <NULL> >
< LockLevel, 0 >
< LockWait, 10 >
< LogBuffSize, 65536 >
< LogDir, e:\andrew\datacache\ >
< LogFileSize, 64 >
< LogFlushMethod, 1 >
< LogPurge, 0 >
< Logging, 1 >
< MemoryLock, 0 >
< NLS_LENGTH_SEMANTICS, BYTE >
< NLS_NCHAR_CONV_EXCP, 0 >
< NLS_SORT, BINARY >
< OracleID, NYCATP1 >
< PassThrough, 0 >
< PermSize, 4000 >
< PermWarnThreshold, 90 >
< PrivateCommands, 0 >
< Preallocate, 0 >
< QueryThreshold, 0 >
< RACCallback, 0 >
< SQLQueryTimeout, 0 >
< TempSize, 514 >
< TempWarnThreshold, 90 >
< Temporary, 1 >
< TransparentLoad, 0 >
< TypeMode, 0 >
< UID, OS_OWNER >
ORACLE:
Hardware: Sunos 5.10; 24x1.8Ghz (unsure of type); 82 GB RAM
Version 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
Schema:
CREATE MATERIALIZED VIEW OS_OWNER.MV_US_DATAMART
TABLESPACE TS_OS
PARTITION BY RANGE (ORDER_DATE)
PARTITION MV_US_DATAMART_MINVAL VALUES LESS THAN (TO_DATE(' 2007-11-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_NOV_D1 VALUES LESS THAN (TO_DATE(' 2007-11-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_NOV_D2 VALUES LESS THAN (TO_DATE(' 2007-11-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_NOV_D3 VALUES LESS THAN (TO_DATE(' 2007-12-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_DEC_D1 VALUES LESS THAN (TO_DATE(' 2007-12-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_DEC_D2 VALUES LESS THAN (TO_DATE(' 2007-12-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_DEC_D3 VALUES LESS THAN (TO_DATE(' 2008-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_08_JAN_D1 VALUES LESS THAN (TO_DATE(' 2008-01-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_08_JAN_D2 VALUES LESS THAN (TO_DATE(' 2008-01-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_08_JAN_D3 VALUES LESS THAN (TO_DATE(' 2008-02-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_MAXVAL VALUES LESS THAN (MAXVALUE)
LOGGING
NOCOMPRESS
TABLESPACE TS_OS
NOCACHE
NOCOMPRESS
NOPARALLEL
BUILD DEFERRED
USING INDEX
TABLESPACE TS_OS_INDEX
REFRESH FAST ON DEMAND
WITH PRIMARY KEY
ENABLE QUERY REWRITE
AS
SELECT order_date, if_system,
GROUPING_ID (order_date,
if_system,
business_dim_id,
time_dim_id,
account_dim_id,
ordertype_dim_id,
instr_dim_id,
execution_dim_id,
exec_exchange_dim_id
) GROUPING_ID,
/* ============ DIMENSIONS ============ */
time_dim_id, business_dim_id, account_dim_id, ordertype_dim_id,
instr_dim_id, execution_dim_id, exec_exchange_dim_id,
/* ============ MEASURES ============ */
-- o.FX_RATE /* FX_RATE */,
COUNT (*) no_orders,
-- SUM(NO_ORDERS) NO_ORDERS,
-- COUNT(NO_ORDERS) CNT_NO_ORDERS,
SUM (filled_quantity) filled_quantity,
COUNT (filled_quantity) cnt_filled_quantity, SUM (quantity) quantity,
COUNT (quantity) cnt_quantity, SUM (commission) commission,
COUNT (commission) cnt_commission, SUM (fills_number) fills_number,
COUNT (fills_number) cnt_fills_number,
SUM (aggressive_fills) aggressive_fills,
COUNT (aggressive_fills) cnt_aggressive_fills,
SUM (fx_rate * filled_quantity * average_price) notional,
COUNT (fx_rate * filled_quantity * average_price) cnt_notional,
SUM (fx_rate * fills_number * average_price) total_price,
COUNT (fx_rate * fills_number * average_price) cnt_total_price,
SUM (CASE
WHEN order_status = 'C'
THEN 1
ELSE 0
END) cancelled_orders_count,
COUNT (CASE
WHEN order_status = 'C'
THEN 1
ELSE 0
END
) cnt_cancelled_orders_count,
-- SUM(t.FX_RATE*t.NO_FILLS*t.AVG_PRICE) AVERAGE_PRICE,
-- SUM(FILLS_NUMBER*AVERAGE_PRICE) STAGING_AVERAGE_PRICE,
-- COUNT(FILLS_NUMBER*AVERAGE_PRICE) CNT_STAGING_AVERAGE_PRICE,
SUM (routed_orders_no) routed_orders_no,
COUNT (routed_orders_no) cnt_routed_orders_no,
SUM (routed_liquidity_qty) routed_liquidity_qty,
COUNT (routed_liquidity_qty) cnt_routed_liquidity_qty,
SUM (removed_liquidity_qty) removed_liquidity_qty,
COUNT (removed_liquidity_qty) cnt_removed_liquidity_qty,
SUM (added_liquidity_qty) added_liquidity_qty,
COUNT (added_liquidity_qty) cnt_added_liquidity_qty,
SUM (agent_charges) agent_charges,
COUNT (agent_charges) cnt_agent_charges,
SUM (clearing_charges) clearing_charges,
COUNT (clearing_charges) cnt_clearing_charges,
SUM (execution_charges) execution_charges,
COUNT (execution_charges) cnt_execution_charges,
SUM (transaction_charges) transaction_charges,
COUNT (transaction_charges) cnt_transaction_charges,
SUM (order_management) order_management,
COUNT (order_management) cnt_order_management,
SUM (settlement_charges) settlement_charges,
COUNT (settlement_charges) cnt_settlement_charges,
SUM (recovered_agent) recovered_agent,
COUNT (recovered_agent) cnt_recovered_agent,
SUM (recovered_clearing) recovered_clearing,
COUNT (recovered_clearing) cnt_recovered_clearing,
SUM (recovered_execution) recovered_execution,
COUNT (recovered_execution) cnt_recovered_execution,
SUM (recovered_transaction) recovered_transaction,
COUNT (recovered_transaction) cnt_recovered_transaction,
SUM (recovered_ord_mgt) recovered_ord_mgt,
COUNT (recovered_ord_mgt) cnt_recovered_ord_mgt,
SUM (recovered_settlement) recovered_settlement,
COUNT (recovered_settlement) cnt_recovered_settlement,
SUM (client_agent) client_agent,
COUNT (client_agent) cnt_client_agent,
SUM (client_order_mgt) client_order_mgt,
COUNT (client_order_mgt) cnt_client_order_mgt,
SUM (client_exec) client_exec, COUNT (client_exec) cnt_client_exec,
SUM (client_trans) client_trans,
COUNT (client_trans) cnt_client_trans,
SUM (client_clearing) client_clearing,
COUNT (client_clearing) cnt_client_clearing,
SUM (client_settle) client_settle,
COUNT (client_settle) cnt_client_settle,
SUM (chargeable_taxes) chargeable_taxes,
COUNT (chargeable_taxes) cnt_chargeable_taxes,
SUM (vendor_charge) vendor_charge,
COUNT (vendor_charge) cnt_vendor_charge,
SUM (routing_charges) routing_charges,
COUNT (routing_charges) cnt_routing_charges,
SUM (recovered_routing) recovered_routing,
COUNT (recovered_routing) cnt_recovered_routing,
SUM (client_routing) client_routing,
COUNT (client_routing) cnt_client_routing,
SUM (ticket_charges) ticket_charges,
COUNT (ticket_charges) cnt_ticket_charges,
SUM (recovered_ticket_charges) recovered_ticket_charges,
COUNT (recovered_ticket_charges) cnt_recovered_ticket_charges
FROM us_datamart_raw
GROUP BY order_date,
if_system,
business_dim_id,
time_dim_id,
account_dim_id,
ordertype_dim_id,
instr_dim_id,
execution_dim_id,
exec_exchange_dim_id;
-- Note: Index I_SNAP$_MV_US_DATAMART will be created automatically
-- by Oracle with the associated materialized view.
CREATE UNIQUE INDEX OS_OWNER.MV_US_DATAMART_UDX ON OS_OWNER.MV_US_DATAMART
(ORDER_DATE, TIME_DIM_ID, BUSINESS_DIM_ID, ACCOUNT_DIM_ID, ORDERTYPE_DIM_ID,
INSTR_DIM_ID, EXECUTION_DIM_ID, EXEC_EXCHANGE_DIM_ID)
NOLOGGING
NOPARALLEL
COMPRESS 7;
No of rows: 2228558
The query (taken Mondrian) I run against each of them is:
select sum("MV_US_DATAMART"."NOTIONAL") as "m0"
--, sum("MV_US_DATAMART"."FILLED_QUANTITY") as "m1"
--, sum("MV_US_DATAMART"."AGENT_CHARGES") as "m2"
--, sum("MV_US_DATAMART"."CLEARING_CHARGES") as "m3"
--, sum("MV_US_DATAMART"."EXECUTION_CHARGES") as "m4"
--, sum("MV_US_DATAMART"."TRANSACTION_CHARGES") as "m5"
--, sum("MV_US_DATAMART"."ROUTING_CHARGES") as "m6"
--, sum("MV_US_DATAMART"."ORDER_MANAGEMENT") as "m7"
--, sum("MV_US_DATAMART"."SETTLEMENT_CHARGES") as "m8"
--, sum("MV_US_DATAMART"."COMMISSION") as "m9"
--, sum("MV_US_DATAMART"."RECOVERED_AGENT") as "m10"
--, sum("MV_US_DATAMART"."RECOVERED_CLEARING") as "m11"
--,sum("MV_US_DATAMART"."RECOVERED_EXECUTION") as "m12"
--,sum("MV_US_DATAMART"."RECOVERED_TRANSACTION") as "m13"
--, sum("MV_US_DATAMART"."RECOVERED_ROUTING") as "m14"
--, sum("MV_US_DATAMART"."RECOVERED_ORD_MGT") as "m15"
--, sum("MV_US_DATAMART"."RECOVERED_SETTLEMENT") as "m16"
--, sum("MV_US_DATAMART"."RECOVERED_TICKET_CHARGES") as "m17"
--,sum("MV_US_DATAMART"."TICKET_CHARGES") as "m18"
--, sum("MV_US_DATAMART"."VENDOR_CHARGE") as "m19"
from "OS_OWNER"."MV_US_DATAMART" "MV_US_DATAMART"
where I uncomment a column at a time and rerun. I improved the TimesTen results since my first post, by retyping the NUMBER columns to BINARY_FLOAT. The results I got were:
No Columns ORACLE TimesTen
1 1.05 0.94
2 1.07 1.47
3 2.04 1.8
4 2.06 2.08
5 2.09 2.4
6 3.01 2.67
7 4.02 3.06
8 4.03 3.37
9 4.04 3.62
10 4.06 4.02
11 4.08 4.31
12 4.09 4.61
13 5.01 4.76
14 5.02 5.06
15 5.04 5.25
16 5.05 5.48
17 5.08 5.84
18 6 6.21
19 6.02 6.34
20 6.04 6.75 -
Custom Report taking more time to complete Normat
Hi All,
Custom report(Aging Report) in oracle is taking more time to complete Normal.
In one instance, the same report is taking 5 min and the other instance this is taking 40-50 min to complete.
We have enabled the trace and checked the trace file, but all the queries are working fine.
Could you please suggest me regarding this issue.
Thanks in advance!!TKPROF: Release 10.1.0.5.0 - Production on Tue Jun 5 10:49:32 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Sort options: prsela exeela fchela
count = number of times OCI procedure was executed
cpu = cpu time in seconds executing
elapsed = elapsed time in seconds executing
disk = number of physical reads of buffers from disk
query = number of buffers gotten for consistent read
current = number of buffers gotten in current mode (usually for update)
rows = number of rows processed by the fetch or execute call
Error in CREATE TABLE of EXPLAIN PLAN table: APPS.prof$plan_table
ORA-00922: missing or invalid option
parse error offset: 1049
EXPLAIN PLAN option disabled.
SELECT DISTINCT OU.ORGANIZATION_ID , OU.BUSINESS_GROUP_ID
FROM
HR_OPERATING_UNITS OU WHERE OU.SET_OF_BOOKS_ID =:B1
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.00 0.05 11 22 0 3
total 3 0.00 0.05 11 22 0 3
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
3 HASH UNIQUE (cr=22 pr=11 pw=0 time=52023 us cost=10 size=66 card=1)
3 NESTED LOOPS (cr=22 pr=11 pw=0 time=61722 us)
3 NESTED LOOPS (cr=20 pr=11 pw=0 time=61672 us cost=9 size=66 card=1)
3 NESTED LOOPS (cr=18 pr=11 pw=0 time=61591 us cost=7 size=37 card=1)
3 NESTED LOOPS (cr=16 pr=11 pw=0 time=61531 us cost=7 size=30 card=1)
3 TABLE ACCESS BY INDEX ROWID HR_ORGANIZATION_INFORMATION (cr=11 pr=9 pw=0 time=37751 us cost=6 size=22 card=1)
18 INDEX RANGE SCAN HR_ORGANIZATION_INFORMATIO_FK1 (cr=1 pr=1 pw=0 time=17135 us cost=1 size=0 card=18)(object id 43610)
3 TABLE ACCESS BY INDEX ROWID HR_ALL_ORGANIZATION_UNITS (cr=5 pr=2 pw=0 time=18820 us cost=1 size=8 card=1)
3 INDEX UNIQUE SCAN HR_ORGANIZATION_UNITS_PK (cr=2 pr=0 pw=0 time=26 us cost=0 size=0 card=1)(object id 43657)
3 INDEX UNIQUE SCAN HR_ALL_ORGANIZATION_UNTS_TL_PK (cr=2 pr=0 pw=0 time=32 us cost=0 size=7 card=1)(object id 44020)
3 INDEX RANGE SCAN HR_ORGANIZATION_INFORMATIO_FK2 (cr=2 pr=0 pw=0 time=52 us cost=1 size=0 card=1)(object id 330960)
3 TABLE ACCESS BY INDEX ROWID HR_ORGANIZATION_INFORMATION (cr=2 pr=0 pw=0 time=26 us cost=2 size=29 card=1)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 11 0.01 0.05
asynch descriptor resize 2 0.00 0.00
INSERT INTO FND_LOG_MESSAGES ( ECID_ID, ECID_SEQ, CALLSTACK, ERRORSTACK,
MODULE, LOG_LEVEL, MESSAGE_TEXT, SESSION_ID, USER_ID, TIMESTAMP,
LOG_SEQUENCE, ENCODED, NODE, NODE_IP_ADDRESS, PROCESS_ID, JVM_ID, THREAD_ID,
AUDSID, DB_INSTANCE, TRANSACTION_CONTEXT_ID )
VALUES
( SYS_CONTEXT('USERENV', 'ECID_ID'), SYS_CONTEXT('USERENV', 'ECID_SEQ'),
:B16 , :B15 , SUBSTRB(:B14 ,1,255), :B13 , SUBSTRB(:B12 , 1, 4000), :B11 ,
NVL(:B10 , -1), SYSDATE, FND_LOG_MESSAGES_S.NEXTVAL, :B9 , SUBSTRB(:B8 ,1,
60), SUBSTRB(:B7 ,1,30), SUBSTRB(:B6 ,1,120), SUBSTRB(:B5 ,1,120),
SUBSTRB(:B4 ,1,120), :B3 , :B2 , :B1 ) RETURNING LOG_SEQUENCE INTO :O0
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 20 0.00 0.03 4 1 304 20
Fetch 0 0.00 0.00 0 0 0 0
total 21 0.00 0.03 4 1 304 20
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
1 LOAD TABLE CONVENTIONAL (cr=1 pr=4 pw=0 time=36498 us)
1 SEQUENCE FND_LOG_MESSAGES_S (cr=0 pr=0 pw=0 time=24 us)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 4 0.01 0.03
SELECT MESSAGE_TEXT, MESSAGE_NUMBER, TYPE, FND_LOG_SEVERITY, CATEGORY,
SEVERITY
FROM
FND_NEW_MESSAGES M, FND_APPLICATION A WHERE :B3 = M.MESSAGE_NAME AND :B2 =
M.LANGUAGE_CODE AND :B1 = A.APPLICATION_SHORT_NAME AND M.APPLICATION_ID =
A.APPLICATION_ID
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 2 0.00 0.00 0 0 0 0
Fetch 2 0.00 0.03 4 12 0 2
total 5 0.00 0.03 4 12 0 2
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
1 NESTED LOOPS (cr=6 pr=2 pw=0 time=15724 us cost=3 size=134 card=1)
1 TABLE ACCESS BY INDEX ROWID FND_APPLICATION (cr=2 pr=0 pw=0 time=20 us cost=1 size=9 card=1)
1 INDEX UNIQUE SCAN FND_APPLICATION_U3 (cr=1 pr=0 pw=0 time=9 us cost=0 size=0 card=1)(object id 33993)
1 TABLE ACCESS BY INDEX ROWID FND_NEW_MESSAGES (cr=4 pr=2 pw=0 time=15693 us cost=2 size=125 card=1)
1 INDEX UNIQUE SCAN FND_NEW_MESSAGES_PK (cr=3 pr=1 pw=0 time=6386 us cost=1 size=0 card=1)(object id 34367)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 4 0.00 0.03
DELETE FROM MO_GLOB_ORG_ACCESS_TMP
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.02 3 4 4 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.02 3 4 4 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
0 DELETE MO_GLOB_ORG_ACCESS_TMP (cr=4 pr=3 pw=0 time=29161 us)
1 TABLE ACCESS FULL MO_GLOB_ORG_ACCESS_TMP (cr=3 pr=2 pw=0 time=18165 us cost=2 size=13 card=1)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 3 0.01 0.02
SET TRANSACTION READ ONLY
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.01 0 0 0 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.01 0 0 0 0
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 1 0.00 0.00
SQL*Net message from client 1 0.00 0.00
begin Fnd_Concurrent.Init_Request; end;
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 148 0 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 148 0 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
log file sync 1 0.01 0.01
SQL*Net message to client 1 0.00 0.00
SQL*Net message from client 1 0.00 0.00
declare X0rv BOOLEAN; begin X0rv := FND_INSTALLATION.GET(:APPL_ID,
:DEP_APPL_ID, :STATUS, :INDUSTRY); :X0 := sys.diutil.bool_to_int(X0rv);
end;
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 9 0 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 9 0 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 8 0.00 0.00
SQL*Net message from client 8 0.00 0.00
begin fnd_global.bless_next_init('FND_PERMIT_0000');
fnd_global.initialize(:session_id, :user_id, :resp_id, :resp_appl_id,
:security_group_id, :site_id, :login_id, :conc_login_id, :prog_appl_id,
:conc_program_id, :conc_request_id, :conc_priority_request, :form_id,
:form_application_id, :conc_process_id, :conc_queue_id, :queue_appl_id,
:server_id); fnd_profile.put('ORG_ID', :org_id);
fnd_profile.put('MFG_ORGANIZATION_ID', :mfg_org_id);
fnd_profile.put('MFG_CHART_OF_ACCOUNTS_ID', :coa);
fnd_profile.put('APPS_MAINTENANCE_MODE', :amm); end;
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 8 0 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 8 0 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 1 0.00 0.00
SQL*Net message from client 1 0.00 0.00
SELECT FPI.STATUS, FPI.INDUSTRY, FPI.PRODUCT_VERSION, FOU.ORACLE_USERNAME,
FPI.TABLESPACE, FPI.INDEX_TABLESPACE, FPI.TEMPORARY_TABLESPACE,
FPI.SIZING_FACTOR
FROM
FND_PRODUCT_INSTALLATIONS FPI, FND_ORACLE_USERID FOU, FND_APPLICATION FA
WHERE FPI.APPLICATION_ID = FA.APPLICATION_ID AND FPI.ORACLE_ID =
FOU.ORACLE_ID AND FA.APPLICATION_SHORT_NAME = :B1
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 2 0.00 0.00 0 7 0 1
total 4 0.00 0.00 0 7 0 1
Misses in library cache during parse: 1
Misses in library cache during execute: 1
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
1 NESTED LOOPS (cr=7 pr=0 pw=0 time=89 us)
1 NESTED LOOPS (cr=6 pr=0 pw=0 time=93 us cost=4 size=76 card=1)
1 NESTED LOOPS (cr=5 pr=0 pw=0 time=77 us cost=3 size=67 card=1)
1 TABLE ACCESS BY INDEX ROWID FND_APPLICATION (cr=2 pr=0 pw=0 time=19 us cost=1 size=9 card=1)
1 INDEX UNIQUE SCAN FND_APPLICATION_U3 (cr=1 pr=0 pw=0 time=9 us cost=0 size=0 card=1)(object id 33993)
1 TABLE ACCESS BY INDEX ROWID FND_PRODUCT_INSTALLATIONS (cr=3 pr=0 pw=0 time=51 us cost=2 size=58 card=1)
1 INDEX RANGE SCAN FND_PRODUCT_INSTALLATIONS_PK (cr=2 pr=0 pw=0 time=27 us cost=1 size=0 card=1)(object id 22583)
1 INDEX UNIQUE SCAN FND_ORACLE_USERID_U1 (cr=1 pr=0 pw=0 time=7 us cost=0 size=0 card=1)(object id 22597)
1 TABLE ACCESS BY INDEX ROWID FND_ORACLE_USERID (cr=1 pr=0 pw=0 time=7 us cost=1 size=9 card=1)
SELECT P.PID, P.SPID, AUDSID, PROCESS, SUBSTR(USERENV('LANGUAGE'), INSTR(
USERENV('LANGUAGE'), '.') + 1)
FROM
V$SESSION S, V$PROCESS P WHERE P.ADDR = S.PADDR AND S.AUDSID =
USERENV('SESSIONID')
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.00 0.00 0 0 0 1
total 3 0.00 0.00 0 0 0 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
1 NESTED LOOPS (cr=0 pr=0 pw=0 time=1883 us cost=1 size=108 card=2)
1 HASH JOIN (cr=0 pr=0 pw=0 time=1869 us cost=1 size=100 card=2)
1 NESTED LOOPS (cr=0 pr=0 pw=0 time=1059 us cost=0 size=58 card=2)
182 FIXED TABLE FULL X$KSLWT (cr=0 pr=0 pw=0 time=285 us cost=0 size=1288 card=161)
1 FIXED TABLE FIXED INDEX X$KSUSE (ind:1) (cr=0 pr=0 pw=0 time=617 us cost=0 size=21 card=1)
181 FIXED TABLE FULL X$KSUPR (cr=0 pr=0 pw=0 time=187 us cost=0 size=10500 card=500)
1 FIXED TABLE FIXED INDEX X$KSLED (ind:2) (cr=0 pr=0 pw=0 time=4 us cost=0 size=4 card=1)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
asynch descriptor resize 2 0.00 0.00
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 6 0.00 0.00 0 0 0 0
Execute 6 0.01 0.02 0 165 0 4
Fetch 1 0.00 0.00 0 0 0 1
total 13 0.01 0.02 0 165 0 5
Misses in library cache during parse: 0
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 37 0.00 0.00
SQL*Net message from client 37 1.21 2.19
log file sync 1 0.01 0.01
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 49 0.00 0.00 0 0 0 0
Execute 89 0.01 0.07 7 38 336 24
Fetch 29 0.00 0.09 15 168 0 27
total 167 0.02 0.16 22 206 336 51
Misses in library cache during parse: 3
Misses in library cache during execute: 1
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
asynch descriptor resize 6 0.00 0.00
db file sequential read 22 0.01 0.14
48 user SQL statements in session.
1 internal SQL statements in session.
49 SQL statements in session.
0 statements EXPLAINed in this session.
Trace file compatibility: 10.01.00
Sort options: prsela exeela fchela
1 session in tracefile.
48 user SQL statements in trace file.
1 internal SQL statements in trace file.
49 SQL statements in trace file.
48 unique SQL statements in trace file.
928 lines in trace file.
1338833753 elapsed seconds in trace file. -
CDP Performance Issue-- Taking more time fetch data
Hi,
I'm working on Stellent 7.5.1.
For one of the portlet in portal its taking more time to fetch data. Please can some one help me to solve this issue.. So that performance can be improved.. Please kindly provide me solution.. This is my code for fetching data from the server....
public void getManager(final HashMap binderMap)
throws VistaInvalidInputException, VistaDataNotFoundException,
DataException, ServiceException, VistaTemplateException
String collectionID =
getStringLocal(VistaFolderConstants.FOLDER_ID_KEY);
long firstStartTime = System.currentTimeMillis();
HashMap resultSetMap = null;
String isNonRecursive = getStringLocal(VistaFolderConstants
.ISNONRECURSIVE_KEY);
if (isNonRecursive != null
&& isNonRecursive.equalsIgnoreCase(
VistaContentFetchHelperConstants.STRING_TRUE))
VistaLibraryContentFetchManager libraryContentFetchManager =
new VistaLibraryContentFetchManager(
binderMap);
SystemUtils.trace(
VistaContentFetchHelperConstants.CONTENT_FETCH_TRACE,
"The input Parameters for Content Fetch = "
+ binderMap);
resultSetMap = libraryContentFetchManager
.getFolderContentItems(m_workspace);
* used to add the resultset to the binder.
addResultSetToBinder(resultSetMap , true);
else
long startTime = System.currentTimeMillis();
* isStandard is used to decide the call is for Standard or
* Extended.
SystemUtils.trace(
VistaContentFetchHelperConstants.CONTENT_FETCH_TRACE,
"The input Parameters for Content Fetch = "
+ binderMap);
String isStandard = getTemplateInformation(binderMap);
long endTimeTemplate = System.currentTimeMillis();
binderMap.put(VistaFolderConstants.IS_STANDARD,
isStandard);
long endTimebinderMap = System.currentTimeMillis();
VistaContentFetchManager contentFetchManager
= new VistaContentFetchManager(binderMap);
long endTimeFetchManager = System.currentTimeMillis();
resultSetMap = contentFetchManager
.getAllFolderContentItems(m_workspace);
long endTimeresultSetMap = System.currentTimeMillis();
* used to add the resultset and the total no of content items
* to the binder.
addResultSetToBinder(resultSetMap , false);
long endTime = System.currentTimeMillis();
if (perfLogEnable.equalsIgnoreCase("true"))
Log.info("Time taken to execute " +
"getTemplateInformation=" +
(endTimeTemplate - startTime)+
"ms binderMap=" +
(endTimebinderMap - startTime)+
"ms contentFetchManager=" +
(endTimeFetchManager - startTime)+
"ms resultSetMap=" +
(endTimeresultSetMap - startTime) +
"ms getManager:getAllFolderContentItems = " +
(endTime - startTime) +
"ms overallTime=" +
(endTime - firstStartTime) +
"ms folderID =" +
collectionID);
Edited by: 838623 on Feb 22, 2011 1:43 AMHi.
The Select statment accessing MSEG Table is Slow Many a times.
To Improve the performance of MSEG.
1.Check for the proper notes in the Service Market Place if you are working for CIN version.
2.Index the MSEG table
2.Check and limit the Columns in the Select statment .
Possible Way.
SELECT MBLNR MJAHR ZEILE BWART MATNR WERKS LIFNR MENGE MEINS
EBELN EBELP LGORT SMBLN BUKRS GSBER INSMK XAUTO
FROM MSEG
INTO CORRESPONDING FIELDS OF TABLE ITAB
WHERE WERKS EQ P_WERKS AND
MBLNR IN S_MBLNR AND
BWART EQ '105' .
Delete itab where itab EQ '5002361303'
Delete itab where itab EQ '5003501080'
Delete itab where itab EQ '5002996300'
Delete itab where itab EQ '5002996407'
Delete itab where itab EQ '5003587026'
Delete itab where itab EQ '5003587026'
Delete itab where itab EQ '5003493186'
Delete itab where itab EQ '5002720583'
Delete itab where itab EQ '5002928122'
Delete itab where itab EQ '5002628263'.
Select
Regards
Bala.M
Edited by: Bala Malvatu on Feb 7, 2008 9:18 PM -
Report rdf with size 8mb taking more time to open
Hello All,
I have a rdf ( reports 6i) report with size 8.5mb taking more time to open and more time to access each field.
Please let me know how do i solve this issue.
Please do the needful.
Thanks.Thanks for immediate response.
pls let me know how do i know this.
Right now i have the below details from report->help
Report Builder 6.0.8.11.3
ORACLE Server Release 8.0.6.0.0
Oracle Procedure Builder 6.0.8.11.0
Oracle ORACLE PL/SQL V8.0.6.0.0 - Production
Oracle CORE Version 4.0.6.0.0 - Production
Oracle Tools Integration Services 6.0.8.10.2
Oracle Tools Common Area 6.0.5.32.1
Oracle Toolkit 2 for Windows 32-bit platforms 6.0.5.35.0
Resource Object Store 6.0.5.0.1
Oracle Help 6.0.5.35.0
Oracle Sqlmgr 6.0.8.11.3
Oracle Query Builder 6.0.7.0.0 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle ZRC 6.0.8.11.3
Oracle Express 6.0.8.3.5
Oracle XML Parser 1.0.2.1.0 Production
Oracle Virtual Graphics System 6.0.5.35.0
Oracle Image 6.0.5.34.0
Oracle Multimedia Widget 6.0.5.34.0
Oracle Tools GUI Utilities 6.0.5.35.0
Thanks
Edited by: Abdul Khan on Jan 26, 2010 11:54 PM -
XML Publisher(XDODTEXE) in EBS taking more time with the same SQL in TOAD
HI
XML Publisher(XDODTEXE) in EBS taking more time with the same SQL in TOAD.
The sql has 5 union clauses.
It takes 20-30 minutes in TOAD compared to running through Concurrent Program in XML Publisher in EBS taking around 4-5 hours.
The Scalable Flag at report level is turned on with the JVM options set to -Xmx1024m -Xmx1024m in Concurrent Program definition.
Other configurations for Data Template like XSLT, Scalable, Optimization are turned on though didn't bounce the OPP Server for these to take effect as I am not sure whether it is needed.
Thanks in advance for your help.But the question is that how come it is working in TOAD and takes only 15-20 minutes?
with initialization of session ?
what about sqlplus ?
Do I have to set up the the temp directory for the XML Publisher report to make it faster?
look at
R12: Troubleshooting Known XML Publisher and E-Business Suite (EBS) Integration Issues (Doc ID 1410160.1)
BI Publisher - Troubleshooting Oracle Business Intelligence (XML) Publisher For The Oracle E-Business Suite (Doc ID 364547.1)
Maybe you are looking for
-
Ical appointment to busy not showing in week view
Hi, When I make an appointment in iCal there is no showing the difference between busy or free in week view. what is wrong?
-
Dynamic table with drop down lists
I have a Dynamic table with a header row, Section and footer row. Section has the following cells(columns): Cell1 (drop down with locations), button (to remove row), CCode (Color Code RAL), CName (color name). I'm starting with 1 row. now what I want
-
Anyone know of a free flac to mp3 (or wav) converter? Thanks a lot.
-
ECM Budget Upload using BAdI HRECM00_BDG0001
Hi experts, Iu2019m implementing HRECM00_BDG0001 BAdI in transaction PECM_START_BDG_BSP. This transaction executes a BSP application, in this application after clicking a button the BAdI is called. I need to show a file browser to let the user to upl
-
Help: I am being charged twice for my subscription my screen name is iceywhite and I signed up for one Premium account my email is [removed for privacy] I could not find a number to call. I was just charged two charges of $25 equaling $50, instead of