Background Jobs getting Cancelled
Hi SRM Gurus
we are working on SRM 4.0 and follow a classic scenarios.
We have schedulled following background jobs
1 BBP_GET_STATUS_2
2 CLEAN_REQREQ_UP
3 SMWP_BATCH
Which were running successfully however from yesterday this all jobs are showing status cancelled.
Can any one throw some light as to why this jobs are getting cancelled or how to check the reaons for the cancelling of jobs.
regards,
Nimish Sheth
Hi Nimish,
for how long where they running ?
They might be cancelled because of time out (ex: R/3 system not available temporary).
Do you have traces in SM21 in the same time fence ?
Rgds
Christophe
Similar Messages
-
Background Job get Cancelled when executing the report. Reason?
Hi All,
I have scheduled a Back ground Job and executed Immediately.
when checking transacion SM37 the job get canceled.
How to find out the problem for the Job Cancellation.
Regards,
Vijihi
After scheduling back ground job ( give a time laps of 2 min )
then go to sm37 ( at this moment , the job is not yet started) .
select ur job in sm 37 and when job starts processing , type JDBG as the command and press enter.
Now it will go to the debugging screen, where u will find system program . Now set a break point at the stements used in ur program from the debugging screen itself.( menu - breakpoint- breakpoint at - statement ) and press F8 .
Now you can start debug ur code.
Revrt back if any issues.
Regards,
Naveen -
Report program when run in background job getting cancelled immediately
Hi
When i run a program in foreground i am able to see the output. But when run in background not able to run the job successfully. The job is getting cancelled immediately.
I am using the below function module for output display. Should i need to pass any parameters in the below function module so that i can run the program in background successfully.
CALL METHOD DETAIL_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = IS_LAYOUT
I_SAVE = 'A'
IS_VARIANT = GS_VARIANT
CHANGING
IT_FIELDCATALOG = IT_FIELDCATALOG
IT_OUTTAB = BLOCKED_STOCK_TAB_ALV[].
Please suggest.
Thanks and regards
Rajani YeluriHi Rajani.
ALV require the DRYPOR(screen) for display but incase you run in back ground which have to write to spool but in spool we can only write in format of LIST REPORT not inter-active report like ALV. That why
system cancelled your process immediately.
Hope it helps.
Sayan. -
Background job getting CANCELLED
hello,
i have a background job scheduled for a report program.it is getting cancelled and giving the following error:
"TABLE_ILLEGAL_STATEMENT"
You attempted to change, delete or create a line in the
internal table "???", but no valid cursor exists
for the table.
Possible reasons:
1. The relevent ABAP/4 statement does not include the addition
"...INDEX...", although the statement is not
inside a "LOOP...ENDLOOP" loop processing this table.
2. The relevent ABAP/4 statement was called from within a
"LOOP...ENDLOOP" loop after a DELETE "???".
what could be the reason?it is also giving following error message:
Caution: Program has changed
Caution: At time of termination, Active source code no longer available and after above two statements its giving sign "?" before every statement in below manner:
024300 ? lit_ekpo_dummy1[] = it_ekpo[].
024310 ? DELETE lit_ekpo_dummy1 WHERE ebeln NE tab1-ebeln.
024320 ? DESCRIBE TABLE lit_ekpo_dummy1 LINES count01.
024330 ?
024340 ? REFRESH lit_ematn_dummy[].
024350 ? lit_ematn_dummy[] = lit_ematn[]. -
Standard Background Job getting cancelled
Hello Guru ,
In my BI dev server one standard event periodic job is geting cancelled due to following reason
Job Name : AP_CCMS_MONI_BATCH_STARTUP_DP
Program: RSAL_BATCH_TOOL_STARTUPDISP
cancelled error
No alerts in configuration range
Internal error:
Job cancelled after system exception ERROR_MESSAGE
can anybody help me in this regards
Regards
DeepakRun the job once again and lets see what happens... sometimes system cancels the job....check in ST22 if there is short dump.
Thanks....
Shambhu -
Background job getting cancelled : Choose at least one scope of list
Hello to all,
I am trying to Run on Z report in background which conatins SUBMIT statement to standard progarm for MB5B .This report already programmed to call a report in background.It takes stocks for given period,I am taking the values using "import memory-id" statement.It gives an error log in SM37 as:
Choose at least one scope of list
Message no. M7829
Can we call a submit stmt in a report that is to run in background?? or pls provide any alternative for this problem??
Thnax & Regards
SonalHi Sonal,
1. This is happening because there are some checkboxes on the selection screen
which are ticked by default when we run in fore ground
and are blank when run in background.
Hence the system gives the error meaning to select atleast one of them.
2. We can simulate this error in foreground also.
There is one button on selection screen in the middle frame.
"> Category"
Just push it.
Some checkboxes will appear now.
Untick all of them and run the report. You will get the same error
Choose at least one scope of list
3. So while doing SUBMIT in the z report, you can pass the values of those checkboxes (which ever you require) as 'X'.
eg.
report abc.
submit RM07MLBD
with matnr = '3'
with pa_wdzer = 'X'.
4. The checkboxes field names are:
PARAMETERS : pa_wdzer LIKE AM07M-MB5B_XONUL
modif id liu.
PARAMETERS : pa_wdzew LIKE AM07M-MB5B_XONUL
modif id liu.
PARAMETERS : pa_wdwiz LIKE AM07M-MB5B_XONUL
modif id liu.
PARAMETERS : pa_wdwuw LIKE AM07M-MB5B_XONUL
modif id liu.
PARAMETERS : pa_wdwew LIKE AM07M-MB5B_XONUL
modif id liu.
PARAMETERS : pa_ndzer LIKE AM07M-MB5B_XONUL
modif id liu.
PARAMETERS : pa_ndsto LIKE AM07M-MB5B_XONUL
modif id liu.
regards,
amit m. -
SAP Back ground Jobs getting cancel automatically
Hi All,
All schedule Background jobs getting cancel automatically in ECC 5 server. Also not getting any job log in respective schedule job. please help me out with expert suggestions.
Regards
Gyan1)Are the bgd workprocess free in the system currently?Check if there are any long running jobs holding them.
Bgd Work process are free but with error code 373,223,007 etc for all 5 bg wp
error reports from work directory as per work process:---
wp 22 :Fri Sep 25 15:07:04 2009
A
A ABAP/4 Program SAPLSYDB .
A Source LSYDBU27 Line 7.
A Error Code DBIF_DSQL2_DEFAULT_CR_ERROR.
A Module $Id: //bas/640_REL/src/krn/runt/abexsql.c#5 $ SAP.
A Function DsqlErrorHandler Line 1986.
A COMMIT/ROLLBACK error on "DEFAULT" database connection..
A
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 12289]
C Rollback Work (0)
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c 252]
B ComRolHook(BEFORE_COMMIT, free_all) failed
B db_con_commit received an error return code in before-commit action
M ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c 12036]
WP23: Fri Sep 25 15:06:05 2009
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 12289]
C Rollback Work (0)
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c 252]
B ComRolHook(BEFORE_COMMIT, free_all) failed
B db_con_commit received an error return code in before-commit action
M ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c 12036]
wp 24:Fri Sep 25 14:33:10 2009
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c 252]
B ComRolHook(BEFORE_COMMIT, free_all) failed
B db_con_commit received an error return code in before-commit action
B ***LOG BZY=> unexpected return code 32768 calling DBACDS [dbacds#2 @ 1225] [dbacds 1225 ]
B
*WP25: *** ERROR => BtcCleanUp: BtcLgAp-call failed (rc = 4) [btcjcntl.c 1308]*
M ThCallHooks: call hook >ITSP: EndOfSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >RtmClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_CANCEL
M ***LOG R47=> ThResFree, delete (001009) [thxxmode.c 1284]
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >DbgBeforeTaskSwitch< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH
B
B Fri Sep 25 14:47:04 2009
B Disconnected from connection con_da={R/3*WORKFLOWTRACE,26000006,1}
please let me know where i can send log file if req.
2)Check for the sm21/sm50 bgd wp traces.
Getting so may Tem se management errors.
Some TemSe objects are stored in files. To do this, a path name is set up from the TemSe object name. To be able to use this path, TemSe management requires a directory. It attempted to create it itself. However, this did not succeed.
3)Check if the filesystem is full as you suggest no logs are being written.
File system having free space
4)Check if the user who has scheduled the job is locked ?
user unlocked
please help me to resolv this issue.
thanks
Gyan
Edited by: Gyan Prakash on Oct 9, 2009 10:02 AM -
Job getting cancelled in background scheduling
Hi,
I have written a report in the SAP HR system and it is to be scheduled in background. This program transfers the PERNRs from HR system to CRM system as partners in BUT000.The report works perfectly fine if it is run in foreground. When I run it in background the job gets cancelled and I get the job log having a message that it could not ascertain code page and the system exception ERROR_MESSAGE is raised. If anybody has any clues regarding this problem please help me.
Thanks & Regards,
Rahul.Hi,
I Guess you are using container controllers in the Report, and all container contols requires help from Sap Gui for execution. I guess that is the reason it is failing in background . Please check on that aspect as well.
Hope this helps.. -
Job in background is getting cancelled
Hi Abapers,
I have created the program to display data. It works fine when I execute it from SE38.
But when I execute the same program in background, It gets cancelled.
Can any one give me the reason & what can we do for this?
Thanks,
Hemal ShahHi Hemanl ,
Since you are executing the program ins background i assume that it is not an interactive ALV , so i would suggest you not to use a container on the screen and use the default screen provided by sap.
Here is the steps you need to folllow
1. Delete the Screen you created to display the ALV.
2. As the screen in deleted so no custom container is required , hence remove the code to create the custom container .
3: When you create grid object give the parent i.e. the parameter I_PARENT the value
CL_GUI_CONTAINER=>SCREEN0 ,
Rest of the coding with the gird as the original one .
Make these changes and execute your program and see,
Regards
Arun -
SM:SELFDIAGNOSIS background job getting failed in Solution manager
Hi All,
SM:SELFDIAGNOSIS background job getting failed in Solution manger server :
Job Log:
2-22-2012 16:44:02 Job started 00 516 S
2-22-2012 16:44:02 Step 001 started (program RDSWP_SELF_DIAGNOSIS, variant &0000000000324, user ID BASISUSER) 00 550 S
2-22-2012 16:45:07 Internal session terminated with a runtime error (see ST22) 00 671 A
2-22-2012 16:45:07 Job cancelled 00 518 A
ST22: Dump:
Runtime Errors ITAB_DUPLICATE_KEY
Date and Time 02-22-2012 16:45:07
Short text
A row with the same key already exists.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_DSWP_SD_DIAGNOSE_CONSISTENTCP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An entry was to be entered into the table
"\CLASS=CL_DSWP_SD_DIAGNOSE_CONSISTENT\METHOD=CHECK_USERS_BP\DATA=LT_USCP"
(which should have
had a unique table key (UNIQUE KEY)).
However, there already existed a line with an identical key.
The insert-operation could have ocurred as a result of an INSERT- or
MOVE command, or in conjunction with a SELECT ... INTO.
The statement "INSERT INITIAL LINE ..." cannot be used to insert several
initial lines into a table with a unique key.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ITAB_DUPLICATE_KEY" " "
"CL_DSWP_SD_DIAGNOSE_CONSISTENTCP" or "CL_DSWP_SD_DIAGNOSE_CONSISTENTCM00M"
"CHECK_USERS_BP"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
KIndly Suggest to resolve the above issue
Thanks
NekkalapuHI,
Deatils:
SAP EHP 1 for SAP Solution Manager 7.0
SAP_ABA 701 0006 SAPKA70106
SAP_BASIS 701 0006 SAPKB70106
PI_BASIS 701 0006 SAPK-70106INPIBASI
ST-PI 2008_1_700 0002 SAPKITLRD2
CRMUIF 500 0004 SAPK-50004INCRMUIF
SAP_BW 701 0006 SAPKW70106
SAP_AP 700 0019 SAPKNA7019
BBPCRM 500 0016 SAPKU50016
BI_CONT 704 0007 SAPK-70407INBICONT
CPRXRPM 400 0016 SAPK-40016INCPRXRP
ST 400 0024 SAPKITL434
ST-A/PI 01M_CRM570 0000 -
ST-ICO 150_700 0009 SAPK-15079INSTPL
ST-SER 701_2010_1 0002 SAPKITLOS2
Thanks
Nekkalapu -
Triggering a job when the first job gets cancelled...
From BMV0, we can trigger a job once the first job is completed using the 'After Job' option. Can u tell me if its also possible to start another job when the first job gets cancelled ?
Message was edited by: Sushma Anuprava
Message was edited by: Sushma AnupravaHi,
Go to the database view V_OP and check for the column 'STATUS' which gives the background job status , based on value from this column (cancelled status ) , start the new job with FM : 'JOB_START' .
Regards
Appana -
LANDSCAPE FETCH job gets cancelled
Hello Guru's,
The LANDSCAPE FETCH job gets cancelled on solution manager system due to the below mentioned error and in order to fix it
we have already applied the SAP note 1335225 but, the issue still persists.
Right now, we have come across the SAP note 1108071 which says the job will get cancelled "if you made adaptive computing
settings in SMSY and the SLD is not accessible".
can any one help me with how to check the adaptive computing settings in the header data of the system.
Also, the SLD check from system via tcode:sldcheck is sucessfull and we could access the SLD via browser. Please find the
details below.
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_MP0
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name: ashb01wa06pr.global.aes.com
port number: 59000
user : SLDAPIUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access d
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 3
=> Check whether the SLD is running!
Immediate reponse is highly appreciated
Best Regards,
S.ViswanathanHello,
Could you include the Landscape_fetch error you mentioned in your message?
I think the issue is still your SLD. At the bottom of SLDCHECK it tries to retreive business systems in SLD.
If it is successfull you will see something like:
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
yoursystem1
yoursystem2
yoursystem3
(more...)
Your SLD check shows that it cannot retrieve systems from the SLD:
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 3
=> Check whether the SLD is running!
Please make sure that you have configured your SLD according to the post-installSLD setup and configuration guide. If you still have problems, follow this toubleshooting process...
http://help.sap.com/saphelp_nw70/helpdata/EN/78/20244134a56532e10000000a1550b0/frameset.htm
Best Regards.
Edited by: Phil May on Sep 2, 2009 10:31 AM -
Background job is cancelled dut o variant not exist
Dear friends,
In my program I have created a variant using FM 'RS_VARIANT_CREATE', and after the creation of variant , i'm submitting the job immediately, but the job get canceled with error message, specified variant is not defined.
when i checked the VARID table the variant gets updated, the time differnce is approximately 8 sec for both varaint creation and job start timre. Can any one face this type of issue, could any one help on this.
Thanks for your time.
Best regards
Kumar.Hi Kumar,
Right after you create your variant use the statement COMMIT WORK AND WAIT.
If it doesn't work you can do something like this
While f_found = space.
select * from varid
where report = 'XYZ'
and variant = 'MYVAR'.
if sy-subrc = 0.
f_found = 'X'.
else.
wait up to 1 seconds.
endif.
endwhile.
I still think try COMMIT WORK AND WAIT after calling RS_VARIANT_CREATE.
Kind regards,
Marius -
Delta uploading job get cancelled in SAP R/3
question, during delta loading from SAP R/3 to BW, if the delta uploading job get cancelled twice for some reason, will I lost some delta data??
Pls advise!
Many Thanks!
rajatina.Hi,
If your delta jobs are getting error out in BW then you don't need to worry about, because till that time your delta pointer in source system is not yet updated. But if you make any request green by chance in BW monitor then your delta pointer will get updated and you might loose some delta.
You can request repeat delta multiple times without any issue.
Regards,
Durgesh. -
Background job getting failed every day
Hi,
This background job getting failed every day.But this job was running fine initial periord.Please help me out this issue.
SAP_REORG_UPDATERECORDS
SAP_WP_CACHE_RELOAD_FULL
SLCA_LCK_SYNCHOWNERS
Regards
Naanas.If this is R/3, then none of the above jobs should exist in the system, if scheduled by default with other standard jobs, then these should be removed
Note 1034532 - Changes for standard jobs
Note 931436 - SLCA_LCK_SYNCHOWNERS standard job terminates
Maybe you are looking for
-
How many members can you have in a GROUP?
I am in the process of creating "groups" in my Blackberry 8330 Curve. On my previous cell phone, I could only send a text to 10 contacts at the time even if I had more than 10 members in a group. I have been told by older style BB users that this i
-
Can't add file to baggage files folder
Hi, I have a javascript file I'm trying to add to the baggage files folder. However, for some reason, I can't add it. I'm using robohelp 6 and roboosource control 3.0. When I try to add the file, nothing is added to the folder. I was able to add the
-
Custom New/Edit Forms not mobile supported
Hi All - I have created custom New/Edit Form in SPD. When I am trying to browse these in mobile view - It is giving error: The following error is not mobile supported: /lists/<listname>/<customnewform.aspx> In PC view it opens the same URL properly w
-
Where do I find my iweb files on my computer?
Help! My 17" PB suffered a hard drive failure and I had to have it replaced. A local (independent) shop recovered some of my files and copied them to dvd's but I don't know where to look for my iweb files on the dvd's. I have visited the sites that I
-
ASSET UNDER CONSTRUCTION (AUC)
Hi, I've created an asset, booked an entry through F-90 & defines the distribution rule against category FXA & put %age is 100% but finally when I go for settlement I'm getting following error:- Balance in transaction currency Message no. F5702 Diagn