Background Movie has No Sound

Hello,
I am new to Livetype and am trying to create end credits for my film.
I have exported a quicktime movie from FCP of the last scene and the music to play during the end credits.
When I bring this clip as a background movie into Livetype it plays with NO SOUND at all.
I need sound so we can create the credits to the rhythm of the music.
Anyone have any suggestions?
Thanks,
Marc Griffin

LiveType doesn't support sound.
If you must have sound, try to do this in Motion.
Otherwise, place cuts to the beat in a duplicated version of your end credits sequence, then export that for LiveType. The cuts should show up as markers in LiveType.

Similar Messages

Downloaded movie has no sound

I just downloaded a movie for the first time into Itunes. it has no sound. Everything else in my Itunes plays fine.. just the movie. Anyone know how I can fix this?

Welcome to the  Discussion Forums.
Can you tell us what you mean when you refer to a downloaded movie and whether your issue relates to one type of content or all.

Rental movie has no sound

I have rented several movies from the itunes store on my apple tv gen1 and it always has sound issues you will be watching and then the sound will cut out this has happened everytime and has done it about 4-8 times per movie. It has now cut out completely. really wondering about the apple tv. Ant suggestions?

Not sure how you've connected your Apple TV. Tried Ethernet?

H264 AUDIO movie has no sound in Quicktime.

Hi.
I have a movie file which was playing the video, but no audio in Quicktime 7.6.2. I opened up the movie properties and saw under the name column a heading "English 5.1" Under the format it is listed simply as "sound". In the movie inspector it only lists the video format (h.264 704x480 millions) and no audio format... which is obviously why Quicktime is not playing the sound. However I opend the movie with VLC and Divx players and they played the movie with the audio with no problems. Mplayer also played it with the sound. I have ffmpgx so I used it to check the source format for it and it listed it is as a matroska (.mkv) container (which I knew), the video as h264 yuv420p 704x 480, but the audio was isted as "h264, 24000 Hz,5:1" I've never seen a h264 audio format before! Is there a codec I am missing to play it? I already have the most recent version of Perian (1.1.3) installed. Am I missing a codec? Can quicktime not play this format? Any input or ideas in general? I could use ffmpegx to export it to another audio format, but I'm just wondering why the original audio format does not play in Quicktime.
Thanks in advance!

AAC-SBR is also known as HE-AAC:
http://en.wikipedia.org/wiki/High-EfficiencyAdvanced_AudioCoding
QuickTime does not, to the best of my knowledge, natively support HE-AAC, or a least only supports it in a MOV or MP4 container (I've read contradictory information on HE-AAC support). I haven't found a QuickTime codec plugin that would allow QuickTime to play an mkv file with HE-AAC audio, so unless someone else here has further information, you'll probably have to convert that file to a different format to get it playing in QuickTime.
Regards.

The Movie Has No Sound

I just started to use iMovie a few days ago, and then I have found a problem with audio. My movie clip is mpg file in iPhoto, and then I drag my movie clip to the timeline in iMovie. It took for a few minute to convert the movie in order to put in timeline. When I click to play the movie in iMovie, it doesn't have any sound comes out. When I click to play the original file in iPhoto to preview, the sound works just fine. My problem is I don't know how to import my video clip, which is mpg file, with the original audio in the movie clip. Could someone help me please?

Hi GOLF:
iMovie doesn't work with MPEG-1 and MPEG-2 Clips
http://docs.info.apple.com/article.html?artnum=42996
http://www.danslagle.com/mac/iMovie/tips_tricks/6018.shtml
Sue

When you add a background over your picture/sound footage the background has 2 fade toggles that both move in mirror fashion. Is there a way to lock one of the fade toggles on a background colour? iMovie 10.0.6

When you add a background over your picture/sound footage the background has 2 fade toggles that both move in mirror fashion. Is there a way to lock one of the fade toggles on a background colour? iMovie 10.0.6

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

I purchased a movie from iTunes and when i try to play it on my mac or iphone its just black and has no sound...

I purchased a movie from iTunes and when i try to play it on my mac or iphone its just black and has no sound...
help please!

Are you going to Movies - Purchased or Computers - Movies ?
If you go to iTunes Store on your computer - Quicklinks - Purchased. Is it showing up there?
Is this a purchase or a rental?

I rented a movie on iTunes and the sound is out of sync and the movie has now been removed?

i rented a movie and the sound was out of sync i reported it and got no respone and now the movie has been removed, help please??

Report it again using this link and ask for a credit.

My ipad has just up and lost all movie playback and sound any ideas??

My ipad has lost all video playback, and has no sound. I can't even listen to iTunes. I have videos of my kids I can't watch, and my kids can't watch you tube on the ipad, what could be the problem.

I also have this problem.
I downloaded all my purchased items from my phone to itunes.
I then upgraded my phone to the latest ios.
The ring tone appears in itunes and is showing on my phone when selected in itunes under devices BUT I cant find it anywhere on the iphone 4.
My son got an ipod for Christmas and it shows up on his!?
Anyone able to help with how I find the tone on my phone?

My iPhone 4S has no sound when I play music, videos and movies

My iPhone 4S has no sound when I play music, videos and movies

Is the slider all the way to the right??
And no, if your phone is vibrating when you get texts/calls then you're not in Do Not Disturb. You would see a Crescent Moon symbol to the left of Battery % if it was on.

My 4s has no sound on most outgoing calls. i constantly have to turn my phone off and on more than once a day to get it to work. how can i get this fixed?

My 4s has no sound on most of the outgoing calls i make. It will ring the other phone I am calling but I cannot hear it nor can they hear me when they answer. Its just dead air but my phone timer is in use. How can this be corrected?

It's very possible that you have stuff running in the background that you don't even realize you have running. For example the default is for all notifications to be on and you usually need few to none of them.
That said, while an iPad can run warm, too hot to handle isn't right. ALso you should get about 10 hours....depending on what you're doing of course. If you're doing processor intensive stuff, like gaming and videos it can drain faster and generate more heat.
I would say if you have an apple store near by, make an appointment and have them check it out. If the issue is due to what they determine to be manufacturer's defects then it could fall under the warranty. But that's up to the store to determine.

My Compaq Presario sr1820nx has no sound!

My Compaq Presario sr1820nx has no sound! I took everything apart for a move. Once completed and everything was put back together I found that I have no sound.

Hi
Please find the link given below might help you.
Link
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

HT1338 My imac has no sound can anybody help?

My IMac was working perfectly this morning and now it has no sound! I´ve checked the volume, the system preferences, built-in audio, without positive results, anybody has a solution?

Repair permissions & restart.
Check your settings in the Audio Midi app which is located in the Utilities folder.
http://support.apple.com/kb/TS1574 Troubleshooting issues with no audio from built-in speakers on Macs
Trick/Tip: Open up GarageBand if installed then, open a program (optional).
Quit out of the GarageBand app.
=====================
Repairing the mysteriously muted Mac
The background on the issue is that there’s a small sensor switch inside the headphone port. When you insert a headphone jack, the sensor understands what's what and changes the sound output setting to Headphones. If you insert a jack for digital audio output, the device changes to Digital Out. When you remove the jack completely, it should read Internal Speakers.
The spirits tell me that there’s a very good chance that you recently had something jacked into this port—a set of headphones or a cable leading to powered speakers, for example. When you removed the jack, something in the port prevented the sensor from tripping correctly. That’s why you see Digital Out instead of internal Speakers.
The solution is to force the sensor to do its job. The safest way to do that is to simply run a jack in and out of the port a few times. Much of the time, this takes care of the problem by correctly tripping the sensor. If that doesn’t work, there may be gunk in the port. Before turning to more invasive techniques, get a can of compressed air, attach the small tube that fits the nozzle, and blast a few shots of air into the port. With any luck, that should dislodge the gunk and the port will operate as it should.
If that doesn’t work, find a foam-tipped swab that fits (electronics shops generally carry them), dip it in rubbing alcohol, and gently insert it into the headphone port in an attempt to wipe away any stubborn gunk. I recommend foam rather than cotton swabs because the cotton variety might leave threads behind. (This same technique works well with misbehaving headphone ports on devices such as iOS devices.)
It's possible that gunk has nothing to do with it. Rather, it may be that the switch just needs a subtle nudge. If a jack or swab doesn't work, I've heard of people successfully resetting it with a deft poke of a toothpick.
http://www.macworld.com/article/2031146/repairing-the-mysteriously-muted-mac.htm l

Background movie and drop zones?

Hello everyone, I'm Dion (David's son), and I'm trying to make an iDVD theme which has a custom moving background and drop zones.
I'm modifying the theme "Sliding Panes", which has seven drop zones. When I drag my custom movie either to the background of the theme or to the Background well in the Settings pane, the background movie is applied, but the drop zones disappear. I've tried everything I can think of (which isn't much, I'm not an iDVD veteran) to avoid this, which includes opening the Drop Zone Editor and then trying to drag the movie to the Background well, which, obviously, doesn't work.
I would sincerely appreciate any advice or answer anyone has - even if it doesn't work.

If you replace the theme background with anything you're going to remove the drop zones that are designed to play within that theme's background. I guess it has "holes" in the background where the drop zones play. You would have to have transparent spots in your movie so the drop zones would play thru. Even then I'm not sure replacing the theme background wouldn't remove the drop zones from use.
You could try the following. Select the sliding panes theme and make it a favorite. The in your User/Library/iDVD/favorites folder find that theme, go into the them package, locate the Contents/Resurces folder in there and substitute your movie for the backgroundmoive that's in there. You'll have to rename your movie accordingly. That may do it. Be sure to do it on a favorite copy so in case it doesn't work you can just remove that them from that folder.
Hope this has been of some help. Good luck.
OT

My video has no sound but i want to add the audio using premier pro

My video has no sound but i want to add the audio using premier pro.
when I want to import the file,it said:your video file has no audio.
But i want to add the sound to my video!!
Does anyone know how to solve this problem??

So you have a video (.mov) that some how you got from Flash.
It has no sound on it.
Does the .mov import into Premiere?
If it does..you edit it in the timeline (sequence) and add audio to the audio track(s) before exporting it.

Background Movie has No Sound

Similar Messages

Maybe you are looking for