Background noise in my "HP Pavilion g4-1207tu Notebook PC" when i was recording sound

Hello there,
I use HP Pavilion g4-1207tu Notebook PC. I have a problem to solve now. I talk from my head phone i will get lots of background noise. 
Now i'm using windows 8 (64 bit) and i installed driver from http://goo.gl/hd74gY here. But problem was not solve.
Please give some solution to i can rercording audio without noise?
This question was solved.
View Solution.

Hi aminulbd,
Happy to help out with the sound issue. Try the following steps:
1: Go into your Control Panel
2: Go into Sound
3: Select the Recording tab
4: Select your headset / microphone
5: Click on Properties in lower right
6: In Properties click on the Level tab
7: Turn down the Microphone boost
8: Click on the Microphone Enhancements tab
9: Check both the Noise Cancellation and Acoustic Echo Cancellation
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

  • No "Background Noise Suppression" option ?

    When using a headset mic, I?broadcast a? constant background 'hum/hiss' while gaming; using Skype; or even just recording my voice with windows voice recorder... This occurs when I am speaking and also (especially annoying) when not speaking.
    Most onboard audio has an option to "suppress background noise" so that at the very least, the microphone will only pick up sound (or begin recording) upon detection of your voice, thus eliminating any constant whirring/humming/hissing sound in the background.
    This becomes particularly annoying to fellow gamers (all of whom have expressed their desire that I turn ON "background noise suppression).
    Of course, no such option exists in the creative control panel.
    Why is there no option for this? Have I missed it's? Or could this be the result of some other problem?
    My card is "PCI Express X-Fi Titanium Fatalty Champion Series."
    I'm running a quad-core Xeon 5335- 2.33ghz, with 8 Gbs of ram.
    Vista Ultimate 64-bit.
    I have tried 3 different headsets/mics and get the same problem.
    ?Thanks for your help,...
    Message Edited by Wallcrawler on 05-3-2009 03:39 [email protected]

    Thanks for the suggestion... I am aware of this option and while it does?eliminate the background hum over my headphones, it doesn't get rid of the problem for people on the receiving end of my mic.
    I just find it really odd that simple onboard audio has a background noise filter, but a soundcard that's over a hundred dollars doesn't.
    When gaming with friends online, I never hear any hissing or constant hum from their mics unless they neglect to activate the "background noise suppresion" in their [onboard] audio options. Their onboard audio only activates the mic upon?detection of their voice and?even then there isn't any background hum.
    I have searched the net and found a couple other posts regarding this same issue with Creative Soundblaster cards...
    I honestly wouldn't have bothered buying this card if I knew it wouldn't have something as basic as a background filter option.
    It's an available option?with most?[what should be far less superior] onboard audio.
    Message Edited by Wallcrawler on 06-0-2009 2:6 [email protected]

  • Audio Background Noise CS4

    Hello:
    I am working with multiple video clips! Some of them are much older and shot around 1986, etc. so when they transition there is a considerable difference in background noise clutter. Humming, suttle buzzing, etc.
    How do I get rid of the background noise so that interviews can be heard more sharp. Basically improve the sound of the old interview footage. I am a rookie when it comes to sound editing.
    Thank you. I will check the correct answer as soon as Inail it if anyone can help me.
    Thank you.

    Jill,
    Your samples of video clips are old and noisy so this isn't going to help much, but it will put things in perspective.
    When films and professional videos are shot (tv shows, movies, etc.) the soundman (sound recorder / mixer ) on the set will get what is called "room tone" at the end of each scene.  This is just everyone being extremely quiet on the set for about 2 minutes while a sound recording is made of what the room sounds like when it is quiet.
    Sometimes there are lights that might be making a slight humming noise or there might be some air conditioning unit on the stage next door making some noise through the duct system...
    basically that "room tone" is background noise.
    That is used by the soundman to eliminate it from his soundtrack later on.  There are filters and special tricks to get rid of the noise.
    so the suggestions above have been about trying to steer you toward focusing on the "noise" part of your soundtrack so it can be eliminated.
    it won't be as easy for you as it is for someone who made a separate "room tone" track when the original recording was made.
    Rod

  • Can Logic plug ins remove background noise from interview?

    Can Logic plug ins remove background noise from interview?
    A friend with an important interview recorded in noisy conditions has asked me to help remove background noise - never done this technically.
    Is there a Logic or third party plug in that would could remove background noise from a spoken word interview? Have tried EQ which improves the sound slightly but not a solution.
    Anyone with specialised knowledge of this sound editing operation?
    cheers
    MS

    There are several 3rd party denoisers, they mostly work by first 'learning' the noise footprint of the audio, for which it is best to record a few seconds of silence (with an open mic).
    These will all do a decent to excellent (it all depends on the source material) job:
    http://www.kvraudio.com/get/3199.html
    http://www.kvraudio.com/get/2104.html
    http://www.kvraudio.com/get/2791.html
    http://www.kvraudio.com/get/1182.html
    http://www.kvraudio.com/get/1029.html
    Addit:
    Is it that background noise (traffic, talking etc) drowns out the words? Then you'd probably have more luck with (radical) eq-ing and/or notch filtering to find the most dominant frequency range of the speaker in relation to the background noise.
    As an interviewer myself I will point out that even with a small disctaphone you need to have some awareness of how the microphone picks up things. As soon as you nead to lean towards whoever you're talking to, just to make sure you're audible, the dictaphone on the table is probably recording mainly ambient noise, the interview being part of that. This is especially a problem when interviewing in a busy public space.

  • Headphone Background Noise/Hiss

    When listening to music through headphone on my Inc, there is some slight background noise similar to the faint hiss/hum you get when listening to an old cassette. Its nothing that loud...you can only hear it during quiet parts or silence. It is there even if the volume is zero. When I pause or stop a song, the noise remains for a couple seconds, then goes away.
    Is this normal for Droid's or do I have a defective chip/jack? All other mp3 players I've ever owned have had crystal clear audio (silence is dead silent) and I'm trying to get rip of my ipod and only use my Droid, but if this is normal its a deal breaker.
    Thanks

    I have provided some information below that may help.
    1.      Try using another pair of headphones.
    2.      Try clearing the cache and data on the music app. Instructions are listed below:
    -Select Menu
    -Select Settings
    -Select Applications
    -Select All
    -Select Music
    -Clear Cache
    -Clear Data
    3.      Try a soft reset. Instructions are listed below:
    -Power the device off
    -Pull the battery for 20 seconds
    -Place the battery back in
    -Power the device back on

  • How can I eliminate the background noise on ishuffle?, How can I eliminate the background noise on ishuffle?

    I recently bought a second hand ishuffle. I downloaded the music stored in my laptop on to my ishuffle. Whenever I play music on ishuffle I hear a background noise (sounding like a tin foil being rubbed). However this noise is not there when I hear the same music on my laptop. How can I rectify this?

    That makes me sad. thannk you

  • Found Audacity for my background noise. Can I edit my audio files in the FCPX event folder in Finder?

    I think I found the solution to my background noise problem using Audacity.
    But can I edit my audio files that are in FCPX Event folder in Finder? Or do I actually have to edit my project all over again to put in new audio (edited by Audacity)?

    No, copying the whole Project and Event is just too much of a waste of time.
    Do this, in the Browser, select the audio file you need to take to Audacity.  Export it as a Master File, and in the Settings section of the Share window, set Format to Audio Only.  Set Audio File Format to AIFF.  Set Open With to "Other" and select Audacity.  Then pick your Desktop as the location to save the file.
    In Audacity, do whatever it is you want and save it.
    Back in FCP X, import the new "fixed" file, be sure to check the box to copy it to your Event folder.
    Finally, if necessary, do a Replace edit with the new version to the old one if it has already be edited into a Timeline.

  • How do I eliminate the delay in reducing background noise with each new clip?

    My microphones pick up a fair amount of background nosie.  At 60% reduction with iMovie's built in editor it sounds perfect.  The only problem is that it takes about .5 seconds to go from zero reduction to 60%.  If this were only at the start of the new movie, that would be fine.  But this occurs at every new clip.  I'm editing together a long series of short, ten second clips...so there is a distracting hissing of background noise once every ten seconds.  Any help on this would be great.

    You may have installed a persona.
    You can uninstall your current Persona and revert to the Default theme (Firefox (Tools) > Add-ons > Themes).
    See
    * [[Personas]]
    * [[Using themes with Firefox]]

  • Filtering background noise using two microphones

    Hi,
    I am new to Labview so please bear with me. I am trying to work out the sound vibration level emitted from a compressor. I have a microphone placed next to it but it is operating in a noisy laboratory and therefore I need to filter out the background noise.
    I have another microphone to record the background noise. I think I might need to use an adaptive noise cancellation filter but cannot figure out how to make one on Labview. I have tried simply inputting the two signals and subtracting them but get an error saying "Resource requested by this task has already been reserved by a different task" when trying to run it.
    Basically I am looking for the simplest way to get rid of the background noise in real time or in processing the signals afterwards.
    Any help would be greatly appreciated. Please ask if you need more information.
    Thanks a lot,
    Sam

    An ax (also spelled axe) is a tool for chopping down trees.  I was trying to make a joke.  Like some other experienced LabVIEW programmers, I do not like the Dynamic Data Type because it hides the structure of the data contained within it.
    The subtraction technique is standard and simple.  The biggest issue is phase shift.  Suppose the two microphones are 1 meter apart. A sound arriving on the line through the microphones will arrive 3 milliseconds later at one than at the other. Sound arriving along a line at right angles to the line through the microphones and equidistant from both will arrive at the same time at each.  At other angles the time will vary between those values. Compensating for that delay or phase shift is necessary to get good cancellation.
    In addition the amplitude of the signals at each microphone will vary inversely as the square of the distance between the source and the microphone. For sources much closer to one microphone the amplitude difference can be significant.
    Directional microphones will further complicate the amplitude variations.  I think that two microphones are not enough to provide unambiguous determination of the direction of an unknown source, especially when there are multiple sources.
    Lynn

  • Background noise with electric guitar

    Hi, I'm playing my les paul into a cheap (like $100) m-audio fast track interface, and picking up the signal with the usb on my macbook pro. I am using the audio port to send the signal to my line 6 amp.
    I am quite sure i have set all the necessary settings correctly in the sound part of system preferences but i still seem to be getting background noise when i play. If i turn on the noise gate it takes away the background noise on dead time but if i play anything clean and turn it up i'm getting a buzz or something in the background.
    How do i get rid of this, do i need a better interface,or a studio to actually record in or what. should i use an expensive mic instead and put it next to my amp? im just lost. i want the best sound and dont know how to get it....please help

    There is confusion here the interface says m-audio fast track on it. I got it from a friend that is all I have used besides garageband and my guitar. My cable is a monster and should be fine in my opinion.
    I started garageband and opend an electric guitar track. with the clean combo.
    My input was set to mono input 2 , input one gives me no sound and more background noise.
    After that I still got background noise, its like a fuzz, i read alot of ppl talking about a ticking sound but its definetly not that. its just staticy
    ill try the headphones though...any other tips?
    Message was edited by: stevewwf1

  • Others can hear a ton of background noise when talking on the iphone 5

    When I'm using my headset to talk with others the background noise is extremely loud.  I have tried the earpods that came with the phone and the background noise cuts in and out and have tried Bose headsets and the noise sounds awaful....like a wind tunnel to others.  Any advice on how to help or take care of this problem?

    Every time I try to talk to my wife when using the Iphone 5 with  Earpods, or any other headset for that matter, she complains that the  mic on my phone headset is picking up EVERY SINGLE SOUND and amplifying  it so loud that she can hardly hear my voice over all the background  noise.... I have replecated this problem now 10 different iphone5 of my  friends.... which is every single iphone 5. Without fail they all have  this same issue. It is not my wifes phone either. People always complain  when I am using my headset. ESPECIALLY when I am trying to comply with  new laws requireing hands free phone usage. It is unacceptable for Apple  to have failed in fixing this problem. I have spoken with several  customer service reps/Genius's about this and there is no fix to date. I  have upgraded my iphone5 to all latest versions of iOS with the hopes  that Apple will one day fix this problem with a software update. Will  someone please help us!!!!! I doubt my Apple loyalty will last without a  fix to this massive inconvienence.  

  • Background noise removal takes about 3 seconds into each clip in timeline to kick in, so each clip has noise in the first few seconds.  How do you get this to remove noise from the very start of the clip?

    Background noise removal takes about 3 seconds into each clip in timeline to kick in, so each clip has noise in the first few seconds.  How do you get this to remove noise from the very start of the clip?

    insert a 5 second gap in the beginning of the timeline.

  • Removing background noise from captured clip

    I wanted to edit an audio which was captured with Video also it contains some background noise.Which filter should I try for this in FCP.

    I read that tutorial it is nice but I have only Final Cut Pro 4.5 HD not the SoundTrack Pro is there no option in FCP for editing audio I do not have much to edit I have to remove sound of a crow and in another video captured audio is having sound very low without increasing volume it is not possible to listen to it.
    So for this any thing that can be done within FCP.
    I have only Soundtrack 1.2 which is not professional version.

  • How to reduce background noise while recording in iphone?

    I am actually recording voice in iphone. How can i ignore the background noises other than the person who is speaking...
    Can anyone suggest me any idea pls ?

    There is no filter in FCE that can eliminate background noise separately from the sound you want to preserve.
    SoundSoap can do this.

  • We use an iphone5 to broadcast basketball games on the radio and have started getting background noise that drowns out the broadcast

    We use an iphone5 along with a Conex FlipJack to broadcast high school basketball games. It worked fine last year. This year, we are picking up more background noise than play by play.

    Yes, if I plug the electric piano into the Mac and listen to it through headphones coming out of the Mac, I get the radio sound (as well as a buzzing sound).
    However, when I plug the electric piano directly into the speaker stereo system, bypassing the Mac entirely, I get only a small amount of interference/buzz. This makes me wonder if the Mac is, at the very least, dramatically amplifying the interference. (Again, when I formerly used the PC, there was a tiny bit of interference on rare occasions, but it was so faint that 99% of the time I did not even know it existed.)
    I've also retried every possible combination in the old PC, just to make sure I wasn't fooling myself before, and at the moment I cannot pick up any radio interference there whatsoever, no matter how hard I try.
    iMac G5 Mac OS X (10.4.8)

Maybe you are looking for