Background not visible

I have a page (http://www.lewesoperatic.co.uk/remember/) which renders as expected in IE7, firefox and Opera but not Safari. The background image should be visible through all the layers. Any thoughts please?

Hi
it's maybe more a puzzle why the other browsers do work..... the white spaces are from your remember.css file, where each one has background-color: #ffffff; in the relevant section; changing this to background-color: transparent; seems to fix it right up
that's the #info and #links sections btw.
Message was edited by: andyBall_uk
another edit - once the links have been visited, your css makes 'em red, which is pretty hard to read over the black background; just my opinion

Similar Messages

Bright White Pixel on LCD - But NOT Visible on Black Background

Hi All,
Just noticed today on my macbook pro (Early 08 - july manufacture) that a small white spot has appeared. Not the blobby large spots that were common lcd problems before on older models, but almost a pinprick of a white spot.
Now its not a dead pixel, since its not black, and its not a stuck pixel, since it has no definite visible colour, also, it is NOT visible on a black background (is this due to the way LED backlights work???) so i dont think its a HOT pixel exactly...it is most visible on plain white backgound - but on any colour R/B/G it is visible as a spot that is brighter than the other area around.
...so...what is it, how can i find out what it is? and might warranty help (presumably for one pixel = no)?
What might i try? Anyone else have experience of this? Every other forum post forum either talks about: 1) dead pixel that si ALWAYS black 2) Pixel that is always white but even on black background 3) coloured pixel - none of which i have exactly, my white pixel is NOT at all visible on black background.

Hi:
I just want to tell you that my Macbook Pro is the same as yours, at it presents that small white spots problem.
In fact, let me tell you all, that those are not dead or stuck pixels, is a problem on the LCD itself, the pixels on that spots are lighter than the other pixels, that's why they look white, but they are not white. They are a lighter color than the other pixels. But again, those are not pixels, in fact they are a group of pixels, from 6 to 13 pixels eash one. Also you can notice like hairlines with the same issue.
My white spots are on the left side of the screen, y 4 of them.
Also, my screen haves particles inside.
I will take my laptop to the apple service senter, and it doesn't matter what they say, they will have to exchange my screen.

I udate my os to 10.6.7 and since then my Pages have color problems. The text is not visible (white on white background) it does'nt help to change the text color nor background color. Pls help

I udate my os to 10.6.7 and since then my Pages have color problems. The text is not visible (white on white background) it does'nt help to change the text color nor background color. I just download the recent trail version of Iworks and install it. The first document I opened it was ok. When I open the second one the problem appear again and stayed. Pls help

This behavior was described many times.
In every occurrence,the operating system was an uncompleted one resulting of the use of Software Update to update the operating system to 10.6.2, 10.6.3, 10.6.4, 10.6.5, 10.6.6, 10.6.7.
In such cases, the solace was to apply a combo updater.
As you are using 10.6.7, download and apply the combo 10.6.7 :
http://support.apple.com/kb/DL1361
After that, run Software Update which will urge you to apply :
Snow Leopard Font Update
Yvan KOENIG (VALLAURIS, France) dimanche 29 mai 2011 21:15:58
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Drop down boxes do not show up. My tabs are not visible. I could barely see the box to type in this question. Something is off. I deleted and reinstalled program it is still just floating words. I work on a Mac with ox 10.6.8

The browser boxes, tabs, and links do not show up with the needed outlines, colors, and shapes. This box I am typing in was barely visible. Above this box is a set of two verticle parallel bars. When I moused over it, I saw it was for inserting a link, but if I had not been curious I would not have known what those lines were for. When I look at this page on PC I have a colored blue backdrop. It is not visible on the Mac. The search box does not have the image of the magnifying class and the arrow does not show up where it should be. The words Post Question just appear below the statement we have made some educated guesses about your browser. I thought maybe it had been a theme that was applied, but I do not see how it could have come on when I trashed the old version of the firefox.

A;though the CSS is very well documented, there are those that ignore those signs. Look at the following
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: auto;
    float: left;
The rest have been given a width of 15em, so this value may be a good start.
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
    border: 1px solid #CCC;
   width: auto;
    background-attachment: fixed;
Just keep the border property and remove the other two.
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
          display: inline;
          f\loat: left;
          background: #FFF;
The following is the original for the above
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
    filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
        display: inline;
        f\loat: left;
        background: #FFF;
Cheers,
Gramps

Second Video not visible even after the first video is stopped

Hi,
I am trying to play a second video after the first video has completed(end of media). But the second video is not visible on the frame eventhough it plays in the background. I tried various things like stopping and closing the first video and removing all the components( visual and control). Still it does not work.
p.stop();
                    p.close();
                    p.deallocate();
                    remove(p.getVisualComponent());
                    remove(p.getControlPanelComponent());
                    removeAll();Is this a problem with JMF or am I doing something wrong? Please help me out.

Nidhi,
What version of LabView and WMP are you using?
This Knowledgebase points towards problems with LabView 7.1 and early and also WMP 9.0.
Are you hearing sound when you play the video? When you port the code over to the other application, are you including all necessary elements and preserving the link to the video?
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video

Photo gallery menu button not visible (black on bl...

Lately (I don't know when it changed because before it was not like this) there is some strange behavior on my N8 when viewing photos in the gallery.
If I chose a photo to view and then tap on screen to get the options I don't see the two buttons at the bottom of the screen (Options and Back buttons). I found out that the buttons are present but they are in black - meaning they are not visible if there is no picture covering those parts of the screen (see attached photos). They are only visible if the background is very bright (white).
Is there any settings to change this annoyance?
P.S. The same is true if I open pictures in Photo Editor.
Attachments:
P1050880.JPG ‏1634 KB
P1050881.JPG ‏2361 KB

Okay, I've tried .ac3 audio and I get the same result.
I had a friend of mine try this test. He had two different Progressive scan DVD players. It played perect on one and showed these errors on the other (the audio not playing and the text appearing in a different font). He said it had somthing to do with the progressive scan settings of the player. One player could switch to this type of DVD and the other one could only do it manually in the menu screen. He said that even hollywood DVDs do this on these types of DVD players. Since I have NEVER seen this problem before what could he be talking about? And why would previous versions of DVD's that I have made in DVD Studio Pro 1, 1.5 and 2 work fine on these same DVD players?
This is driving me nuts. Why would one DVD player play the DVD perfect and another one play the video fine, but mess up the audio and text buttons on the menu?
Other people I have talked to stay that it may be the media it is burned to, but I'm using the same DVD media that I have always used?
Please help!

After Effects are not visible when exporting in Adobe PP CS4

Hi all of you experts!
I have made a simple name/title bar for an interview video, using Adobe After Effects. When i import the composition to Premiere Pro it's visible in the preview window BUT; when I render the video in Premiere Pro the After Effects clip is not visible anymore. AND when i export the complete sequence to a .wmv file, the After Effects clip is not visible either.
I'm not that much of an expert in Premiere Pro or After Effetcs, so hopefully this can easily be solved.
What is it that i'm doing wrong?
Thanks in advance!

Thanks for your reply!
Is there any specific firmat i should export as? I have only tried as a *.AE file (which does not show on the final video) and as a *.MP4 file (whick does not have a transparent background - so i cannot use this)

SQL Expression Fields button not visible in Field Explorer

Hi,
On my Crystal Reports installation I can see the button SQL Expression Fields in Field Explorer but it is not visible on client's installation.
How do I make it visible? I need to create a new report with SQL query for client.
Thanks,
Ajay Audich

Commands are intended to replace the standard linked tables that must users are accustomed to.
I suppose Commands would be considered an "advanced" feature, considering that they require the developer to be able to hand write SQL (our at least copy it from another SQL editor).
If you are comfortable writing reading, writing & editing SQL, Commands will open a the door to a whole new level of control when it comes to creating your data sets.
The biggest problem w Commands is also it's greatest strength... If you're using a Command, CR will assume that you know what you're doing and will not try to rewrite or optimize your SQL in the background. You write it, CR sends it. That means if you write crappy SQL, CR will send your crappy SQL to the db server...
It also means that you can use join types that aren't available in CR and use sub-queries in in your SQL... Basically anything you can do in the db's native editor.
HTH,
Jason

My new folders are not visible in Finder

New folders (generated by a application, SABNZB+, that runs in the background as a web service) will only show up in Finder once I have run a search in Finder and are not visible before. I have tried a disk repair and a permissions rebuild.
Any ideas anyone?

Yes they do, no problems there.
I am starting to believe it might have to do with the fact that the folders are created by an unarchiver that reassembles files after they are downloaded from my newsgroup. The strange thing is that there never used to be a problem, it started somewhere around the second update to mountain lion. But it could also be a new version of the application SABNzb+, I am not sure.
What is also weird is this: I can find the folder when doing a search in Finder, then open the folder, all files are there and the folder is then visible normally.
Edit: The files are reassembled by the unarchiver on the main Macintosh HD, then moved to a different volume and deleted from the originating volume.

Html link not visible as table header in jsp

Hi,
I am not sure if this question belongs to JSP forum, since it's happening in JSP page I am posting it here.
I am seeing this strange problem, in my JSP page all the link are looking fine except some links in Table header. Here is the code snippet:
<th align="left" width="30%"><html:link action="/myAction.do?sortBy=org&all=${param.all}">Organization Name</html:link></th>
ENV is struts, jstl, html.
Now the problem is the text Organization Name is not visible, although it's there and I can click it. If I click and drag mouse over it I can see it.
Also if I put this link anywhere else e.g. <TD> I can see it.
I am not sure why it's happening.
Please help me.
Abhishek

Sounds like a style issue - is it the same colour as the background for some reason?
What styles have you got applied to your <th> columns? The text in them?
Are you using css?

Spry UI (Spry 2.0) Not Visible in IE

I'm still searching and trying to figure out why the new spry menu bar is not visible in IE, but if you anyone can see or knows something that i may have overlooked please let me know. Other than that the menu bar works great in all other browsers including mobile and touch screens. The menubar is still under construction so the only dropdowns are under "software" if anyone is curious about that.
Link to my site: http://www.tweetarmory.com/

The following will work
<!DOCTYPE HTML>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
<link href="Spry-UI-1.7/css/Menu/basic/SpryMenuBasic.css" rel="stylesheet">
<style>
#MenuBar {
     background-color:#cccccc;
     font-family: Arial, Helvetica, sans-serif;
     font-weight: normal;
     font-size: 16px;
     font-style: normal;
     padding:0;
     border-color: #ffffff #ffffff #ffffff #ffffff;
     border-width:0px;
     border-style: none none none none;
.MenuBar br {
     display:none;
.MenuBarLeftShrink {
     float: left;
     width: auto;
.MenuBarRightShrink {
     float: right;
     width: auto;
.MenuBarFixedLeft {
     float: left;
     width: 80em;
.MenuBarFixedCentered {
     float: none;
     width: 80em;
     margin-left:auto;
     margin-right:auto;
.MenuBarFixedCentered br {
     clear:both;
     display:block;
.MenuBarFixedCentered .SubMenu br {
     display:none;
.MenuBarFullwidth {
     float: left;
     width: 100%;
#MenuBar .MenuItemContainer {
     padding: 0px 0px 0px 0px;
     margin: 0;
#MenuBar .MenuItem {
     padding: 0px 24px 0px 0px;
     background-color:#cccccc;
     border-width:1px;
     border-color: #cccccc #ffffff #cccccc #ffffff;
     border-style: none solid none solid;
#MenuBar .MenuItemFirst {
     border-style: none none none none;
#MenuBar .MenuItemLast {
     border-style: none solid none none;
#MenuBar .MenuItem .MenuItemLabel{
     text-align:center;
     line-height:1.4em;
     color:#333333;
     background-color:#cccccc;
     padding: 6px 15px 6px 39px;
     width: 10em;
     width:auto;
.SpryIsIE6 #MenuBar .MenuItem .MenuItemLabel{
     width:1em;
#MenuBar .SubMenu .MenuItem {
     font-family: Arial, Helvetica, sans-serif;
     font-weight: normal;
     font-size: 14px;
     font-style: normal;
     background-color:#ffffff;
     padding:0px 2px 0px 0px;
     border-width:1px;
     border-color: #cccccc #cccccc #cccccc #cccccc;
     border-style: solid solid none solid;
#MenuBar .SubMenu .MenuItemFirst {
     border-style: solid solid none solid;
#MenuBar .SubMenu .MenuItemFirst .MenuItemLabel{
     padding-top: 6px;
#MenuBar .SubMenu .MenuItemLast {
     border-style: solid solid solid solid;
#MenuBar .SubMenu .MenuItemLast .MenuItemLabel{
     padding-bottom: 6px;
#MenuBar .SubMenu .MenuItem .MenuItemLabel{
     text-align:left;
     line-height:1em;
     background-color:#ffffff;
     color:#333333;
     padding: 6px 12px 6px 5px;
     width: 7em;
#MenuBar .MenuItemHover {
     background-color: #999999;
     border-color: #cccccc #cccccc #cccccc #cccccc;
#MenuBar .MenuItemWithSubMenu.MenuItemHover .MenuItemLabel{
     background-color: #999999;
     color: #000000;
#MenuBar .MenuItemHover .MenuItemLabel{
     background-color: #999999;
     color: #000000;
#MenuBar .SubMenu .MenuItemHover {
     background-color: #cccccc;
     border-color: #cccccc #cccccc #cccccc #cccccc;
#MenuBar .SubMenu .MenuItemHover .MenuItemLabel{
     background-color: #cccccc;
     color: #333333;
#MenuBar .SubMenuVisible {
     background-color: #ffffff;
     min-width:0%;
     border-color: #ffffff #ffffff #ffffff #ffffff;
     border-width:0px;
     border-style: none none none none;
#MenuBar.MenuBar .SubMenuVisible {
     top: 100%;
     left:0px;
     z-index:10;
#MenuBar.MenuBarVertical .SubMenuVisible {
     top: 0px;
     left:100%;
     min-width:0px;
#MenuBar .MenuLevel1 .SubMenuVisible {
     background-color: #ffffff;
     min-width:0px;
     top: 0px;
     left:100%;
.SpryIsIE6 #MenuBar .MenuBarView .MenuItemWithSubMenuHover .MenuItemLabel /* IE6 selector */{
     background-color: #999999; /* consider exposing this prop separately*/
     color: #000000;
.SpryIsIE6 #MenuBar .MenuBarView .SubMenu .MenuItemWithSubMenuHover .MenuItemLabel/* IE6 selector */{
     background-color: #cccccc; /* consider exposing this prop separately*/
     color: #333333;
.SpryIsIE6 #MenuBar .SubMenu .SubMenu /* IE6 selector */{
     margin-left: -0px; /* Compensates for at least part of an IE6 "double padding" version of the "double margin" bug */
/* Styles to override the above */
#MenuBar #home .MenuItem {
     background: #cccccc url(http://www.tweetarmory.com/images/buttons/home2.png) no-repeat center top;
#MenuBar #home .MenuItemHover {
     background: #cccccc url(http://www.tweetarmory.com/images/buttons/home2_hover.png) no-repeat center top;
#MenuBar #software .MenuItem {
     background: #cccccc url(http://www.tweetarmory.com/images/buttons/software.png) no-repeat center top;
#MenuBar #software .MenuItemHover {
     background: #cccccc url(http://www.tweetarmory.com/images/buttons/software_hover.png) no-repeat center top;
#MenuBar #internet .MenuItem {
     background: #cccccc url(http://www.tweetarmory.com/images/buttons/internet.png) no-repeat center top;
#MenuBar #internet .MenuItemHover {
     background: #cccccc url(http://www.tweetarmory.com/images/buttons/internet_hover.png) no-repeat center top;
#MenuBar #depot .MenuItem {
     background: #cccccc url(http://www.tweetarmory.com/images/buttons/depot.png) no-repeat center top;
#MenuBar #depot .MenuItemHover {
     background: #cccccc url(http://www.tweetarmory.com/images/buttons/depot_hover.png) no-repeat center top;
#MenuBar #forums .MenuItem {
     background: #cccccc url(http://www.tweetarmory.com/images/buttons/forums.png) no-repeat center top;
#MenuBar #forums .MenuItemHover {
     background: #cccccc url(http://www.tweetarmory.com/images/buttons/forums_hover2.png) no-repeat center top;
#MenuBar .MenuItem {
     border: none;
#MenuBar .MenuItem .MenuItemLabel{
     color:transparent;
     background-color:transparent;
     line-height:2.8em;
#MenuBar .MenuItemWithSubMenu.MenuItemHover .MenuItemLabel{
     background-color: transparent;
     color: transparent;
.MenuBar .MenuItemWithSubMenu .MenuItemLabel{
     background-image: none;
.MenuBar .MenuItemHover.MenuItemWithSubMenu .MenuItemLabel{
     background-image: none;
</style>
</head>
<body>
<ul id="MenuBar">
<li id="home"><a href="http://www.tweetarmory.com/">Home</a></li>
<li id="software"><a href="http://www.tweetarmory.com/software">Software</a>
    <ul>
    <li><a href="http://www.tweetarmory.com/software/anti-malware">Anti-Malware</a></li>
    <li><a href="http://www.tweetarmory.com/software/test">Test</a></li>
    </ul>
</li>
<li id="internet"><a href="#">Internet</a></li>
<li id="depot"><a href="#">Depot</a></li>
<li id="forums"><a href="#">Forums</a></li>
</ul>
<script src="Spry-UI-1.7/includes/SpryDOMUtils.js"></script>
<script src="Spry-UI-1.7/includes/SpryDOMEffects.js"></script>
<script src="Spry-UI-1.7/includes/SpryWidget.js"></script>
<script src="Spry-UI-1.7/includes/SpryMenu.js"></script>
<script src="Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarKeyNavigationPlugin.js"></script>
<script src="Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarIEWorkaroundsPlugin.js"></script>
<script>
// BeginOAWidget_Instance_2141544: #MenuBar
var MenuBar = new Spry.Widget.MenuBar2("#MenuBar", {
      widgetID: "MenuBar",
       widgetClass: "MenuBar MenuBarLeftShrink",
       insertMenuBarBreak: true,
      mainMenuShowDelay: 100,
      mainMenuHideDelay: 200,
      subMenuShowDelay: 200,
      subMenuHideDelay: 200
// EndOAWidget_Instance_2141544
</script>
</body>
</html>
Notice the change in the HTML markup for the menu. Also I did not style the submenu items. If you have a problem with that, return here.
Gramps

Thumbnails not visible in Library Grid View

In LR 1.0 on Mac OS X, after converting from Beta 4.1, my thumbnail images are not visible in the Library Grid View, except for just a brief moment when I first click on a Folder (Shoot) name. The images then disappear, leaving just the background.
Double clicking on an image background brings up the image correctly in Loupe View.
Did I miss something in the conversion?
Many thanks!
(Mac OS X 10.4.8, Dual 2 GHz PowerPC G5, 6.5 RAM)

Hello,
I have a similar problem, (windows xp)
Besides the thumbnails not being visible, when I open LR 1.0, it shows my folder structure as imported, with the number of files per folder, but right after that, the folder names start to gray out, and the number of pictures in each folder goes to "0" . The pictures are still there.
For each keyword it shows 0 pictures, until I click on that keyword, then it shows the number of pictures for that keyword.
I did uninstall 4.1, and deleted the database, I don't know if this is related to some left over Beta 4.1 somewhere in there.( my old identity plate still shows) I had no issues, other than being slow when using beta 4.1, I had only imported pictures on a as needed basis( in 4.1), and not the whole folder structure. ( as I want to do with LR 1.0 )
Any solutions ? ( other than uninstall and trying to to a better job of cleaning up, before re installing ? )
P.S. about 1000 files ( jpg,tiff,psd) did not get imported due to errors, but most of them were in my 4.1 library with no problems.
P.S 2 the keywords were entered either in bridge or ID imager, and written back to the files, I never used beta 4.1 to enter keywords, just used it to search them.
P.S 3 ( sorry this is getting too long...) it crashed on import 5 times, about 20,000 files, internal HD just for pics.
thank you,
Fabio Ventura

Comments not visible in Acrobat

I'm running Acrobat 9 Standard ver. 9.4.1 on 64 bit Windows 7 SP1.
I received a PDF map that is supposed to have Comments in it, but they are not visible in the map portion of the PDF.
They appear in the Comments "Section", but when I click on the comment, an empty box outline is displayed on the map, but not actual comments.
This same error happens with a colleague who is using Ver. 9.5.5.
We can both see the comments correctly displayed on the map using Adobe Reader!
So why won't the same comments show up correctly in Adobe Acrobat?

The files are not secured. Some of the files are part of a pdf portfolio, where the portfolio is a mixture of pdfs created/scanned in 8 and pdfs created/scanned in X and combined into a pdf portfolio by X. The troubled X files are not visible in 8 as standalone files or as files inside the portfolio. Some of the files have never been combined into a portfolio and are not visible to 8.
It does not happen to all of the scans. Some scans done by X are visible in 8 and others are not, even though the scan settings used are the same. Strangely, all of the files, whether visible in 8 or not, are visible in X. The lack of visibility in 8 occurs across multiple machines using 8, not just one machine, and the same pattern occurs across multiple machines running 9.
I have examples of the files, but they contain private information. One such file is two pages. It is a standalone file, not a pdf portfolio. The second page is visible in 8, but the first page is not; both pages are visible in X. If I delete the second page (confidential information) and post the file, will the second page be visible by any means?
Additionally, the file pages are enormous to print even though they were scanned at 400 dpi, color, jpeg2000, jbig2 (lossy), deskew on, background removal off, descreen on, text sharpening, low. The first page was 63.7 MB to print and the second page was 97.2 MB to print. The entire file is only 1913 KB.
Do you think that I have a bad install and should just uninstall and reinstall?

Page 1 Not Visible

I have 7.07 Adobe Professional and when a document is opened
page 1 is not visible. I have to toggle to page 2 and then back to
page 1 to see it, does anyone know how to help me?

In my project however: when I insert from media
browser title only shows black background with
text.
You have a couple choices. You can render your LT
movie in LT and make sure the box is checked that
reads "Render Backgound", but this doesn't seem to be
the choice you want from your post.
So go back to your live type graphic in Live Type and
move your background elements (drag them up) above
the thick gray bar in the timeline such that it
exists in the same area that your text tracks exist.
This way your background elements and text tracks
will all be seen in the .ipr file. And then when
it's in FCP maybe you will need to render it
depending on all that is included, but no big deal
just render it.
Everything will be there.
In you response to me: (You have a couple choices. You can render your LT movie in LT and make sure the box is checked that reads "Render Backgound", but this doesn't seem to be the choice you want from your post.) You left out one important detail. You first need to go to Project Properties and then check the Background Box).
Once you do that you can save your project (with the texture below the backround bar) and import into FCE. You still need to render in FCE. Thanks for your help.
I found the missing link in this post from December 22, 2006:
The DVD Tutorial makes importing LiveType projects look easy but I'm having trouble with my first project.< </div>
Thanks again for getting me there
Mac Book Pro 15" Mac OS X (10.4.9) 2GB RAM, 2.33Ghz Intel, 256mb Video

Page canvast not visible

Hi all,
I have a small problem,
My page canvas is not visible on pages with a full page picture, the canvas falls behind the designs.
How can i bring the page canvas up front so my page numbers which are in the canvas will be visible again.?
Image: left page has the page number on the background, and right page is visible because there is no full size image on it.

@Martin – do you mean your page numbering is not visible due to the full page image?
That's a small "problem" with master spreads and master pages.
All objects on master pages that are stored on the same layer like the ones on regular pages are stacked behind that objects. Always.
To workaround this fact:
1. You need a new layer on top of all other layers, so create one
2. Go to the master page that is applied to the even page of your screenshot
3. Drag your object that is holding the automatic page numbering to that new top most layer
If you want a bit of flexibility, create a new master spread with only your object holding the automatic page numbering and apply this to the desired pages.
Uwe

Background not visible

Similar Messages

Maybe you are looking for