Background of logo appears grey

Hi all,
I tried to create a logo using transaction SE78, but in window the background of the logo appears grey, which should not.
What should I do?

Hi Mani,
In case you are using script(since you have not mentioned whether you are using script or smartforms) please check whether you are specifying any intensity in the include statement
Incase you are using smartforms then please check the output options tab of that window in which you might have specified shading %.
Regards,
Subodh

Similar Messages

Logo Appear Background Color

Hi experts,
I have one question. My client want to upload new logo and letterhead for their company. The problem I got when i upload through se78, the background appear (grey in SAP screen) . Need your advise

1) Before uploading the image, change the setting of your image to 256 Bitmap Image and then upload.
2) If the above does not resolve your issue, check note 205837
3) Refer this thread Re: Using Transparent logo in Smartforms

I didn't close my mac air down properly and when i tried to use it, the screen was frozen. I turned it off and restarted it, and the grey screen with the apple logo appear and the circle just keeps spinning. Can you advise?

i didn't close my mac air down properly and when i tried to use it, the screen was frozen. I turned it off and restarted it, and the grey screen with the apple logo appear and the circle just keeps spinning. Can you advise?

Try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC)

My macbook pro won't start up. Instead of the apple logo appearing in the start up only a grey folder with a ? At the center appears

My macbook pro won't start up. Instead of the apple logo appearing in the start up only a grey folder with a ? At the center appears

Boubert,
the question mark in the folder typically represents the inability to recognize a valid filesystem on the volume being booted from. You can try this, although it might not make a difference: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, select the First Aid tab if it’s not already selected, then press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it able to boot normally now?

I have an iMac that won't boot up. I've read all posts on this subject to no avail. When power is switched on, it chimes, Apple logo appears, spinning wheel, then loading bar starts to fill. It gets to about 25% then switches off! Help please!

iMac that won't boot up! When power is switched on it chimes, Apple logo appears, then loading bar, then spinning wheel. Bar seems to load up and gets to around 25%, then reverts to the start again, gets to about 20% on the bar and then switches itself off leaving a black screen. Tried all the remedies on internet with no avail so would welcome some advice other than binning what is a relatively new computer. Earliest appointment Apple could offer was Thursday 17th, really useful for a business user _ not impressed,

You've probably tried this, but will it Safe Boot? Restart holding down the Shift key until you see the grey progress bar. You'll need to input your admin password during bootup. If it will boot you can then try to eject the disk using the various suggestions here that you haven't tried already:
http://osxdaily.com/2009/08/28/eject-a-stuck-disk-from-your-mac-dvd-super-drive/
Or this (not tried this myself, but if things are desperate): http://www.youtube.com/watch?v=n7NYW9Dr448

Logo turns grey

Hi all,
When uploading a color logo with a white background the logo uploads into
SAP with a light grey background.
The file format is color BMP with a resolution of 75dpi.
When printing this logo it prints with a light grey background in smartforms. Why is this?
Any assistance is greatly appreciated.
Thanks n regards,
Ashmita

Hi Ashmita,
Use 256-bit bmp file to upload. It will not give any grey background.
To convert ur BMP file to 256 bit image, open it in MS-paint save as 256 color bitmap image.
Use it in ur smartform.
Thanks,

Macbook Pro BIOS requires at least 1 minute before the Apple logo appears and Chime sounds.

When I cold-boot my MacBook Pro, it takes a least 1 minute before I get the chime and Apple logo.
Some background on the problem:
After purchase I almost immediately installed Windows 7 on BootCamp and had no problems.
Around 8 months ago I bought a SSD drive and CD-bay kit, put the original HD into the CD bay and the SSD in place of the original HD, installed OSX on the SSD and formatted the original OSX partition, this broke the Windows install.
I tried in vain for around 2 months to repair the Windows partition without having to reinstall it to no avail, so I swapped the positions of the drives.
Since then the Windows & OSX partitions work fine, however from a cold boot it takes upwards of 1 minute before the Apple logo appears and Chime sounds, after that it behaves as expected (maybe 20-30 seconds and I'm fully booted).
Performing a soft restart behaves as expected too (Chime/Logo appear almost immediately and boot time is lightening fast!).
When I close the lid, it exhibits a similar problem in that it takes about 1 minute before it has gone to sleep and I can't do anything to wake it until that time has past.
It's not the end of the world, but it is slightly annoying, so any help would be greatly appreciated.
My guess is some kind of EFI/BIOS problem, but I can't find any other examples of this problem and have no idea how I might fix.

When in OS X go into System Preferences and Select Startup Disk. Then select the OS X entry, even though you are in OS X, and reboot.
Some times the hardware gets confused as to which OS to boot and figuring it out can take some time. Once you select the OS X partition as the OS to boot to it should startup faster.
If not then you have some other problem that I am not familiar with.
You might also want to do a SMC reset, Google for the instructions found on the Apple KB site.

Hi, I bought 2 songs off itunes. I have synced my classic and shuffle with no problems. The new songs show ok in my libary but when i view my iphone 5 in itunes these songs appear greyed out with a ring of dots to the left and will not sync to my iphone?

Hi, some of my songs appear greyed out with a ring of dots to the left in itunes when I view whats on my iphone 5. These songs will not sync to my phone but have synced to my classic and shuffle? Can anybody tell me why this is? Cheers

See this older thread for a few possible solutions.
https://discussions.apple.com/thread/3924425?tstart=30
B-rock

HT3053 I have a 13inch MacBook Pro and when I switch it on the apple logo appears then a slot and the circular symbol which is turning and then before opening the home screen it switches off again. Is there a sequence that I can use to force it to load.

I have got a 13 inch MacBook Pro and it got stuck in a loop so I switched it off by holding the power button down and now when I switch it on the apple logo appears then I get a blank slot at the bottom of the screen then the circle appears and rotates and then it switches off again, I have tried starting it again with the system disc that came with it when it was new but it makes no difference. Is there a sequence that I can use to force it to start.

Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
Take it to whoever replaced the screen and see if they can help you.
iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

I got my iPhone stolen at a party, the next day my friend gave me back my iPhone 4s and he said that it was jailbroken. Now it will not turn on. When i plug it in to a charger, the apple logo appears for about ten second, then connect to iTunes stays on.

Hello, i have a question on my iphone 4s. I went to a party a few days ago and it had gotten stolen. The next day my friend said that he had found it and it was jaibroken? The phone was on 1 % when i had recieved it. It then died and i plugged it in to the charger. When i plugged it in the apple logo appeared as if it was starting but, it wasnt. The apple logo appeared for about ten seconds and then the screen went black. After that, the connect to itunes screen popped up and will not go away. So now when i take it off of the charger the screen just stays black and wont turn on? I tried connecting it to itunes and restoring it. But it wont even show my phone any more on the side of itunes. I tried restoring it and an error had occured (2001). I have looked up on youtube how to fix this problem and non of them have helped or worked. Its my only phone and i cant even text my girlfriend which bothers me terribly!! Please help me ASAP!!

The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck.

I clicked on "Erase all Content and Settings and now my ipad is not working, only the apple logo appears. how to i reset it back?

I clicked on "Erase all Content and Settings and now my ipad is not working, only the apple logo appears. how to i reset it back?
Some please show me how to reset it.

Here is some information from Apple:
http://support.apple.com/kb/TS3274
http://support.apple.com/kb/HT4057

I have an older iPod that no longer shows up in iTunes or appears to be charging. When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point. Is it dead for good?

I have an older iPod that no longer shows up in iTunes or appears to be charging. When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point. Is it dead for good?

If it is otherwise working, you can change the battery. If you want to do it yourself, you can buy the part on eBay and other online sources. Just make sure you know the type of iPod you have so that you get the right part.
http://support.apple.com/kb/HT1353
There are online guides, including the ones on this web site
http://www.ifixit.com/Device/iPod
(Note: Most replacement batteries come with plastic/nylon tools seen in the guides.)
You can also have a repair business do the work.
If it is just the battery, if you do a Reset (using the Menu and Select buttons) while it is connect to your computer, I think it should still be recognized by iTunes.

I have an iphone 4 . A new screen has been fitted front and back. It suffered a bit of a bang. Now when the phone is turned on the apple logo appears but nothing more . Could there be a problem elsewhere ? Other than smashed screen? Any ideas welcome

I have an iphone 4 . It's had a new front and back screen fitted after a bit of a bang . Now when turned on the apple logo appears on the screen and then goes off. Then appears again etc etc etc .
It won't go any further . Any ideas as to what else may be an issue or has anyone else had the same problem and what was the outcome . If I back up to iTunes will I be able to back up my information without any activity showing on the screen !! I'm lost without all my information . I haven't backed up to iCloud for at least 5 months. Can anyone help me PLEASE?????

Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
Take it to whoever replaced the screen and see if they can help you.
iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

HT1414 how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then re

how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then restore to enable to open it..what should i do?i cannot bring it to the smart center because i lost my receipt..is there any chance to recover it?thank you so much..i already update my operating system to ios 6.1.3 but when i recover my back up the operating system was ios 6.1.2..

Your phone is in recovery mode. Did you plug it to the computer running itunes? What happend?

My ipod touch wont turn on!! the apple logo appears for five seconds and then it goes to a black screen and it has been repeating this when im not even touching it!! help!!

my ipod touch wont turn on! i pressed the power button and the white apple logo appeared for five seconds and went to a black screen, and then back to the logo for 5 secs and back to the black screen for 5 secs. im not touching my ipod and it is still doing this. i did leave it onover night to update ios, is this why??

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Background of logo appears grey

Similar Messages

Maybe you are looking for