Background Process Error

Folks, running V8.0.5 on an NT 4 Server. Database won't start,
usual ORA-3113 issued. Turns out when I check the trace files
that Checkpoint process is falling over with a 210 error. As
this is an error associated with a background process I cannot
find any documentation that will give me a clue as to why it is
falling over. Grateful for any help. Enclosed is a sample of the
SIDCKPT.LOG file
*** SESSION ID:(4.1) 2001.10.05.08.41.20.453
error 210 detected in background process
Dump file D:\orant\RDBMS80\trace\we99CKPT.TRC
Fri Oct 05 09:00:54 2001
ORACLE V8.0.5.0.0 - Production vsnsta=0
vsnsql=c vsnxtr=3
Windows NT V4.0, OS V5.101, CPU type 586
Oracle8 Enterprise Edition Release 8.0.5.0.0 - Production
PL/SQL Release 8.0.5.0.0 - Production
Windows NT V4.0, OS V5.101, CPU type 586
Instance name: we99
Redo thread mounted by this instance: 0 <none>
Oracle process number: 5
pid: 1c4
End of Message

Hi,
Response as per your similar question on 12th July:
Check the value of distributed_lock_timeout database parameter.
If the parameter is not set, it will default to 60 seconds. Try increasing this value to at least 120 and retry.
If the solution above does not work, one of the first places to look when assessing problems with the engine is the
Oracle Workflow Monitor. Where this is unavailable, run the script wfstatus.sql
$FND_TOP/sql/wfstatus.sql - Embedded in Oracle Applications
$ORACLE_HOME/admin/sql/wfstatus.sql - Oracle Workflow Standalone

Similar Messages

Dreaded "Unable to connect to background process" error

Re: Compressor 2.0.1
A year ago I used Compressor regularly without issue. Now I get this stupid, "Unable to connect to background process" and Compressor is completely unusable.
I have read article 93234 and followed the instructions *TO THE LETTER* for Compressor 2. Still no change...same stupid message and Compressor refuses to work. I don't have anitvirus software or background disk utilities either.
I find it incredible that Apple hasn't issued an update to fix this. This is supposed to be their professional software...not some Windows crap.
Has anyone discovered what the real problem is...and how to fix this?

David Harbsmeier wrote:>So that leaves the probability that it is an issue with your system. It may be time for a clean install.
A point well taken, which I will investigate and try some basic maintenance first. My Leopard install was completely squeaky clean only about 9 months ago. Doing this again would be very time consuming.
I did try something else: I rebooted from a backup clone of my previous 10.4.11 system. And as I remembered, Compressor works flawlessly there! This at least gives me an option for using it at the moment.
Nonetheless, it must be noted this error is at the top of the list when entering Apple's Compressor support page. This suggests there is a genuine issue going on that many people are encountering. And it must be a LOT of people too... The fact that a third party "fix" utility was written seems to testify to this.
In light of my experience above, is anyone successfully running *Compressor 2.0.1 in Leopard?* If there is indeed a compatibility issue with this new OS, doing a complete system reinstall may be a complete waste of time. At least I still have the option of booting to my old system where it can be used for the present.

Compressor 2 and FCP 4.5 "background process" error

So I switched to my laptop which is running 10.4.11 and Compressor 2. I get "Cannot submit batch" Unable to connect to background process. I don't know if I should try the same proposed solutions that are suggested for the newer versions of the software? Any other suggestions?

VAR,
1. When you can spare another 5 min to solve your problem, instead of coming here and complaining about no one helped you (though Tom did offer a very direct response) you might take the time to read your DVDSP manual.
In it, you will discover that DVDSP is totally capable of converting quicktime movies to m2v and aif files. You have full control over all aspects of bitrate etc. Indeed, it is the same engine as in compressor. If you need an AC3 file, use A-Pack on the aif DVDSP will create.
2. When you say compressor does not work, do you mean -A. it does not launch from within FCP or B. you can not launch it independently?
If it will launch independantly. export a reference QT file, open Compressor and have at it.
QT7 is a problematic issue with FCP4.5. The long term solution is to upgrade to FCP5 to go with 10.4 and QT7. They all fit together much more neatly.
fwiw -
1. the people who hang out here and help out fellow users are not employees of Apple. If you want to complain about the software, a good place to do it is on the FCP feedback page This forum is to provide technical support.
2. The people who hang out here and help fellow users are not compensated. Their efforts are volunteer and no one is under any obligation to respond to you in any way. If you don't like the advice, I'm sure Apple techincal support would be glad to have a $199 conversation with you.
3. Tom is a mainstay of the board and one of the the most knowledgeable people you will find regarding FCP. As such he is highly respected by the serious users of the forum. You will not find a great deal of sympathy or support here if you continue on in this vein ..
You have a technical issue, post the details, For example, what have you tried to solve the problem? The intellectual resources here are quite amazing. I've not seem many posts go unresolved for lack of trying.
good luck.
x

The request could not be submitted for background processing.

Post Author: Chriss
CA Forum: Administration
It's an BOE XI SR2, on Win2k3 server, with a print cluster with two print spools, handling 3000+ printers. I discovered this error to be intermittent and only on one of the spools. It turned out that the only common factor was an HP4250 print driver. I backed all the 4250s down to 4200 drivers and the intermitent error ("Error in File. The request could not be submitted for background processing.") went from about 100 a day to zero. The other spool had a different version of the HP4250 driver and would on rare occassion cause this error, "Error in File ... Page header or footer longer than a page." but never the background processing error.
For reference, when I got this error in XI R1, this was the solution for 'the error with one name and many causes':The error "The request could not be submitted for background processing" can be related to a corrupt or wrong versioned crpe32.dll in the Crystal bin folder. Renaming to crpe32.dll_bak and using the repair command in the the "Add/Remove Programs" tool in the "Control Panel" will reinstall the correct dll. Then restart the Crystal services.

Post Author: krishna.moorthi
CA Forum: Administration
For Crystal reports :
Error : "The request could not be submitted for background processing"
I think,this was not related to a corrupt or wrong versioned crpe32.dll.
but the below mentioned is one of the reason for getting this error.
I got the error when the main report(crystalreports10) having more than 2 subreports not assigned proper tables for the subreports.
Example: (this code raise the abone mentioned error.)
rpt.SetDataSource(Exdataset);
rpt.Subreports["subreportname1"].SetDataSource(Exdataset); // Exdatatset.Tables[1]
rpt.Subreports["subreportname2"].SetDataSource(Exdataset);// Exdatatset.Tables[2]

Background Processing? how schedule job for "System Error" Message .

Hello everyone,
in sap help i have read.
http://help.sap.com/saphelp_nw04/helpdata/en/5a/f72040599a8f5ce10000000a155106/frameset.htm
PCK> Monitoring>Message Monitoring-->Background Processing
you can schedule jobs for various background processing:
●     Archiving of messages processed successfully
●     Deletion of messages that are not to be archived
●     Restarting of messages with errors
●     Rescheduling of lost messages
can anyone understand this docu?
give me some introduction, how can i define and schedule these jobs ?
thx in advance!!
best regards
Yaning

Background Processing
Prerequisites
You have started the message monitor on the initial screen of the PCK and are in Background Processing.
Features
Archiving
You require two archiving sessions to archive messages:
●     One session to write the messages to the archive
●     One session to delete the persisted messages that have been archived
To do this, you schedule an archiving job, which implicitly schedules the sessions to write to the archive and delete the archived messages.
You can define one or more rules for each archiving job; these rules contain conditions that a message must meet in order to be archived by the job. At least one of the defined rules must be met for archiving to take place.
All information that is displayed for a message in message monitoring is archived, in addition to the audit log for each message.
Deleting
A standard delete job is created automatically. It runs once a day. You can schedule additional delete jobs; however, you cannot define rules for them.
Restarting
Instead of restarting messages with errors manually with message monitoring, you can schedule a job to automatically restart these messages. This is possible for all messages for which the number of defined restart attempts has been exceeded (messages with the system error status).
You can define one or more rules for each job to restart messages; these rules contain conditions that a message must meet in order to be restarted by the job. At least one of the defined rules must be met for archiving to take place.
Rescheduling
A standard job to reschedule messages is created automatically. The job runs once a day and ensures that messages lost as a result of database failure, for example, are rescheduled. You can schedule additional rescheduling jobs; however, you cannot define rules for them.
Thx Aamir.
But I mean the messages with errors in Adapter Engine , not in Intergrations Engine.
the situation is like Naveen Pandrangi's WebLog
II. Errors in Adapter Engine [XI : How to Re-Process failed XI Messages Automatically|XI : How to Re-Process failed XI Messages Automatically]
I
Till now we have seen how to resubmit/restart message that failed in Integration Engine. One a message makes it from Integration Engine to Adapter Engine, the message is flagged as checked in Integration Engine. The status of the message in Adapter engine does not effect the processed state in Integration Engine. Now if this message was asynchronous, XI will by default try to restart the message 3 times at intervals of 5 minutes before the status of the message is changed from Waiting to System Error .
*how can i schedule a job to automatically restart these messages with errors?
best regards
Yaning
Edited by: Yaning Liu on Aug 18, 2008 1:43 PM

ERROR while uploading the data into ztable with background processing

Hi gurus,
i am trying to upload the data from excel file to internal table
its working fine ..
but........
if i try to upload the data with background processing , in sm37 it is saying "error during the upload of clipboard contents".
Regards,
Sri

Hi,
FM GUI_UPLOAD doesnt work in background, use dataset to upload it from application server.
refer below code
*--Local Variables
DATA : l_file TYPE string,
         l_line TYPE string,
         l_index TYPE sy-tabix.
*--Clear
CLEAR : l_file.
l_file = p_ipfile.
*--Read the data from application server file.
OPEN DATASET l_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
*--Error in opening file
    MESSAGE i368(00) WITH text-005.
ENDIF.
*--Get all the records from the specified location.
DO.
    READ DATASET l_file INTO l_line.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT l_line AT cl_abap_char_utilities=>horizontal_tab
                      INTO st_ipfile-vbeln
                           st_ipfile-posnr
                           st_ipfile-edatu
                           st_ipfile-wmeng.
      APPEND st_ipfile TO it_ipfile.
    ENDIF.
ENDDO.
Regards,
Prashant

Error: The request could not be submitted for background processing

I'm getting an intermittent error in our custom reporting application using Crystal Reports Server XI R2 w/ SP1:
Error in File C:\WINDOWS\TEMP\{F6D30537-956A-458C-96D0-84ECB520D688}.rpt: The request could not be submitted for background processing.
I'm using the Report Application Server XI Release 2 .NET SDK. This is the code that produces the exception (The export type is pdf):
ByteArray ba = this.reportClientDocument.PrintOutputController.Export(ConvertExportReportTypeToCrystalReportExportType(),0);
The error is also logged by Business Objects in the crystalras log file:
ErrorLog 2007 12 3 12:24:56.531 6624 4872 (\servers\ras\dtsagent\reporthandler.cpp:11592): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11588 ErrorCode:685 ErrorMsg:" Error in File C:\WINDOWS\TEMP\{F6D30537-956A-458C-96D0-84ECB520D688}.rpt:
The request could not be submitted for background processing." DetailedErrorMsg:""
This has been happening regularly about once a week, at which point the RAS fails and no more reports can be run until the CMS and RAS servers have been restarted.
Has anyone else had this problem, or have any ideas?
Thanks

It was not a bug (not in all cases anyhow), but it is one of those error message that might as well say; something went wrong. I wrote an article on the most likely cases for the error and the article can be downloaded from here;
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33
See if the above article will help you out. Please note that having the latest SP / FP is step one. The downloads page is here;
http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Error during background processing which is created by Std.program RFBIBL00

Hi Gurus,
     I am using standard program RFBIBL00 to generate batch session for the Tcode FB01.
     My BDC is working fine , if i choose foreground or display error only option in SM35.But when i process the same session in
     background it is giving error Field BSEG-DMBTR does exist in SAPMF05A 0302.
                             One more thing i want to point out when i process the session in forground or in display error only option
                  there i am getting information message Field BSEG-DMBTR does exist in SAPMF05A 0302. But for background due to same message i.e (Field BSEG-DMBTR does exist in SAPMF05A 0302) session processing is failed.
                                Actually through ZProgram data being uploaded to application server. Then i am executing std. program RFBIBL00 to generate session.And when i go to SM35 & choose the just created session for background processing,then processin i failed.
                          We have recently upgraded from 4.7 to ECC 6.0. Previously RFBIBL00 program is working fine but after upgrade it is not working.
               Please give your valuable suggession.
Regards,
S C Patil.

How are you related to this almost identical problem?
Field BSEG-DMBTR. does not exist in the screen SAPMF05A 0302
Thomas

Error Message: Unable to Connect to Background Process........ HELP!!

When I try to compress a FCP file from FCP version 5.1.4 i get an error message in Compressor Version 2.3.1: *Unable to Connect to Background Process*. I usually work on my G5 but I am on location and have been editing on my Laptop; Powerbook G4 1.25 GHz, with 1.25 gigs of RAM, 80GB Internal. Externals LA CIE 1TB & LA CIE 120GB Firewire external, running OSX 10.5.
Any suggestions???
Model Name: PowerBook G4 15"
Model Identifier: PowerBook5,2
Processor Name: PowerPC G4 (1.1)
Processor Speed: 1.25 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 1.25 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.7.1f1

Moving this discussion to the Help with using Adobe Muse CC forum.

Compressor error message "Unable to connect to background process"

My compressor application became corrupted and showed 2220 hours to convert a FCP file of 65 min to a 90 min mpeg2. After re-installing Compressor every time I try to submit a file I get the error message "Unable to connect to background process"? I tried resetting the background as instructed in the manual but continue to get the same message?
Anybody ever encountered this problem?

Ya I am also getting the same problem I asked here on forum.
some solution is here
http://www.kashum.com/rbf.pl?c=blog&i=1152611689&referer=r
on this link
http://support.apple.com/kb/TA47672?viewlocale=en_US
but they have not worked for me.

Error in File....request could not be submitted for background processing

Hi
We get this error when generating a pdf using crystal reports in .NET. This error doesnot occur when we run the report individually. It occurs when we have multiple users accessing the report simultaneously...
e.g of the error that gets logged...
Error in File C:\WINNT\TEMP\TransactionPDF_rpt {6F6E2A6B-9498-470D-BA4A-8F16E333C232}.rpt:
The request could not be submitted for background processing. at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
We have checked the report formats, access to folders, etc. looks fine...
Any help appreciated.

See if [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33] article will help:
Ludek

Error in bdc (Background processing not possible for material)

Background processing not possible for material with serial number reqmt
Message no. M7419
Diagnosis
You tried to enter the count for a material managed with serial numbers using background processing. This function is not supported.
Procedure
Use the transaction 'Enter inventory count' (MI04) to enter the count for materials managed with serial numbers.

Can You Run this BDC in Foreground Mode
I am doubtfull for that.
please check
Gaurav Sood

GUI_DOWNLOAD and background processing

Hello,
I have created a process which creates a file. this process uses GUI_DOWNLOAD to put the file on the users C drive or other directory on our network. The user wants to run this process in background and the program is returning a 6 (error unknown) from the GUI_DOWNLOAD FM. I was looking on SDN and found out the GUI_DOWNLOAD only works in foreground. You have to use OPEN and CLOSE DATASET statements to process in background. I am thinking about putting a button to denote foreground/background processing and using the appropriate statements to process the file. I will then have to get the file from the app server to a place will the user can get access to it.
<b>first question</b> - is there a FM to do a FTP from the app server to a directory on our network for the user to access?
<b>second question</b> - is this the right approach or is there something else that I should be doing.
thanks in advance for your help

Hi,
Yes, your right, GUI_DOWNLOAD wil not work in background mode, you need to place the file in Application server, here.
See the below link for a FTP program, use the proper commands(i do not know whether downloading the file is possible through the commands)
http://www.sap-img.com/ab003.htm
or else, write a small program which downloads the data from the application server, but it should run in the foreground
Regards
Sudheer

Crystal Reports VS 2008 "The request could not be submitted for background processing"

Hi,
I am going to try to explain this issue the best I can. Please let me know if you need any other information or have any ideas as I have exhausted my resources. We have an ASP.NET application that has highly formatted crystal reports in them that the users can export as PDFs. All reports export without a problem when the application is run off of our desktops. The reports use a sql server authenticated user, executing stored procedures, and each subreport is linked by the main parameter. We are using Visual Studio 2008 version 3.5 SP1 with Crystal Reports Basic for Visual Studio 2008 on Windows 7 Enterprise SP1. We have designed the reports in Crystal Reports XI Release 2 (11.5.12.1838) and imported them into the ASP.NET application. When trying to export the reports as PDFs from the development or production servers, we get the error message below for some, not all, reports:
System.Runtime.InteropServices.COMException (0x800002AD): Error in File C:\Windows\TEMP\KeyAccountProfile {9FA5C095-77A2-425D-AC6B-8BB66B435336}.rpt: The request could not be submitted for background processing. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
We have cleared the temp directory on the servers before exporting and are still receiving the error. We have installed Crystal Reports Basic Runtime for Visual Studio (10.5.2.0) on both servers. I have identified the underlying issue to one stored procedure/subreport that is causing the report to fail. The weird thing is, when we change the connection to point to development, the stored procedure/subreport runs fine for the report that generates an error when run from production, and the data is the exact same. I have tried rebuilding the subreport but the error still appears even though it runs fine for other reports.
I have been through the document below, and othe similar issues in the forums, but still have not found a resolution. I was trying to use the "modules" application put since this is an ASP.NET application I am unsure of which executable I should be looking at.
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33?QuickLink=index&overridelayout=true&36837934524320
Thanks in advance for your assistance,
Brad Hood
06-26-14
OK.. I did some more investigating on this today. I have found out when I move the sub report that generates the error under another sub report, the sub report in question runs without issue. But when I try and move the sub report that produces the error above any other sub report, the error still generates. Can this get any weirder.... FYI.. there is a total of ten sub reports on this report.

Hi Brad
I'm not sure that Modules would show us anything in this case, so let's try a few other things:
1) Make sure you are using SP 1 for Crystal Reports Basic Runtime for Visual Studio:
Crystal Reports for VS 2005 and VS 2008 Updates & Runtime Downloads
2) Seeing as this works on dev, this may be some db inconsistency so enabling the report option "Verify on 1st Print" will be a good idea.
3) Double check the database client and make sure the same client is used on dev and deployed systems. Actually I take back my Modules negative as this is where it may prove useful. Once you have the Modules logs, look at who is loading the crpe32.dll, then look at that process and see the client dlls.
4) Check the printer driver; see if there are any updates. Try a different printer driver.
Ten subreports is not too bad, though not that good either as you are loading the report engine with at minimum 11 simultaneous reports (each subreport is considered to be a report). If a subreport is in a details section and the details section returns a 100 records, you are running 100 + 1 reports. This may lead to memory issues, which may lead to the error.
If I was a betting man, I'd put most of my money on the printer driver (based on your last addition to your post). What ever money I had left would go to some database issue (be it actual data or client related).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Submit Report (Regarding Background Processing)

Hi Guru's,
I want help regarding Background Processing.
I have developed a program which is running fine in forground but in Background mode no values are comming.
All values are becomig Zero.
Plz help.
*--- Submit Report for 'COGI' (Postprocessing of Error Records from Automatic Goods Movements)
SUBMIT coruaffw USING SELECTION-SCREEN '1000'
                  WITH r_cumul = 'X'
                  EXPORTING LIST TO MEMORY
                AND RETURN.
*---- Get the List
CALL FUNCTION 'LIST_FROM_MEMORY'
    TABLES
      listobject = it_list_tab
    EXCEPTIONS
      not_found = 1
      OTHERS     = 2.
IF sy-subrc = 0.
*--- Convert to Ascii
    CALL FUNCTION 'LIST_TO_ASCI'
      TABLES
        listobject         = it_list_tab
        listasci           = it_asci_tab
      EXCEPTIONS
        empty_list         = 1
        list_index_invalid = 2
        OTHERS             = 3.
    IF sy-subrc <> 0.
*      MESSAGE i000 WITH 'Problem in converting LIST to ASCII'.
    ENDIF.
    DESCRIBE TABLE it_asci_tab LINES w_cogi.
    w_cogi = w_cogi - 5.
CALL FUNCTION 'LIST_FREE_MEMORY'
    TABLES
      listobject = it_list_tab.

Hi Arbind,
              You have used return you need to add the addition with.Try this way hope it works
SUBMIT zreport EXPORTING LIST TO MEMORY
                AND RETURN
                WITH P_1 = P_1
                WITH P_2 = P_2
                WITH P_3 = P_3
                WITH S_4 IN S_4
                WITH S_5 IN S_5
                WITH S_6 IN S_6.

Background Process Error

Similar Messages

Maybe you are looking for