Background process zffd terminated due to missing confirmation

Hi all,
In production system loading 2500000 lak data load to DSO when try to activate the DSO throwing below error. Kindly guide me on this.
Error:
Background process <ZASDFFF> terminated due to missing confirmation
Thanks

Hello,
To resolve this issue, you should make some adjustments to the DataStore
object parameters, then you should be able to activate the request.
Please make the following adjustments in transaction RSODSO_SETTINGS
(you can adjust this for each DataStore object):
1) Maximum package size (for activation).
    This you should reduce to 10000 (if the value is higher than that)
    Then the package processing will be less time consuming.
2) Maximum wait time for process (for activation)
    This could be increased to e.g. 600 (if the value is lower than this)
See SAP note 1118205 for further information.
Best Regards
Barry

Similar Messages

Background process BCTL_** terminated due to missing confirmation

Hi Experts,
I have a step in Process chain for activation of a request in DSO. But its failing frequently with error message "Background process BCTL_* terminated due to missing confirmation*". I tried to remove the step from process chain and rebuild it, this avoided the failure for a day. But its failing again at same place.
Can you please guide if anything can be done to stop this failure in future?
Regards,
Nirmal

Hi,
I also faced the same issue.
Error when activate DSO in SAP BI :          "Background process BCTL_*   terminated due to missing confirmation"
I Resolved by the following way:
Steps :
1.ODS Activation window > Click the button u201CActivate in parallelu201D> Changed    the Number of process 3 to 1-->Save
2.ODS Activation window >Click the button u201CGet SIDs in parallelu201D> Changed    the Number of process 3 to 1--> Save
Then start the activation
Successfully completed.
Hope it will help.
Thanks & Best Regards,
Hema

Background process BCTL_4CEDE3M8RTW5WPMQ01YVZ4QYE terminated due to missing

Hi,
I am getting following error when i am activating ODS (Bi 7.0)
Background process BCTL_4CEDE3M8RTW5WPMQ01YVZ4QYE terminated due to missing confirmation.
I tried reloading and activating it,
i tried with RSRV adjusts.
I tried changing package size.
I tried reducing parallel executions.
Still not able to activate. Can some one help me.

Here are the short dump details
Short text of error message:
Invalid PBT server group name: PARALLEL_GENERATORS
Long text of error message:
Diagnosis
     The system tried to initialize the environment for processing
     parallel RFCs using the function module SPBT_INITIALIZE. The server
     group name specified was found to be invalid. The server group name
     describes a group of servers on which the parallel RFCs should be
     processed.
System Response
Procedure
     You can use Transaction RZ12 to determine which PBT server groups
     are configured in your system. You should only use one of the
     server group names listed there to process parallel RFCs.
But i m activating serially with value 1 in option.

Workflow Manager 1.0 (SharePoint 2013): The process was terminated due to an unhandled exception

I am seeing large numbers of the following errors appearing in the event log of the SharePoint 2013 application server hosting Workflow Manager 1.0:
Log Name: Application
Source: Application Error
Date: [Date/Time]
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: [Application Server]
Description:
Faulting application name: Microsoft.Workflow.ServiceHost.exe, version: 1.0.20922.0, time stamp: 0x505e1b24
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
Exception code: 0xe0434352
Fault offset: 0x0000000000047b8c Faulting process id: 0x691c Faulting application start time: 0x01cfc2776b3f0d74
Faulting application path: C:\Program Files\Workflow Manager\1.0\Workflow\Artifacts\Microsoft.Workflow.ServiceHost.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll Report Id: b8157bf8-2e6a-11e4-9413-00155d38891d Faulting package full name:
Faulting package-relative application ID: Event Xml:
Log Name: Application
Source: .NET Runtime
Date: [date/time]
Event ID: 1026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: [same application server]
Description:
Application: Microsoft.Workflow.ServiceHost.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception
Info: Microsoft.Workflow.Common.FatalException Stack: at Microsoft.Workflow.Common.Fx+<>c__DisplayClass2.<failfast>b__0() at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object,
Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart()
Event Xml:
Log Name: System
Source: Service Control Manager
Date: [date/time]
Event ID: 7031
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: [Same application server]
Description:
The Workflow Manager Backend service terminated unexpectedly. It has done this 895 time(s). The following corrective action will be taken in 30000 milliseconds: Restart the service.
Event Xml:
The SharePoint 2013 farm is updated through the September 2014 PU (KB2995902). Topology: 1 App, 2 WFEs. Workflow Manager 1.0 installed to the App server. Workflow Manager 1.0 cumulative updates one
and two have not been installed. The Service Bus Gateway and Service Bus Message Broker services are started. The Workflow Manager Backend service can be started, but then quickly stops.
Thoughts? Resolution? I would be grateful for any assistance.

Hi Stephan,
As I understand, you are encountering the issue that Workflow Manager Backend service terminating each time. May I know did you run the update cmdlets after you installed the updates for SharePoint server 2013? Please confirm it per the link below:
http://technet.microsoft.com/en-us/library/dn133867.aspx
If you haven’t run the updates cmdlets, I suspect this is an install issue. I’d suggest you re-install workflow manager to resolve the issue:
1) Leave WFM/SB Farm
2) Uninstall updates and application in the following order and one at a time:
Service Bus CU1
Workflow Manager CU1
Service Bus 1.0
Workflow Manager 1.0
Workflow Manager Client 1.0
Microsoft Windows Fabric
3) Log into SQL server and delete Service Bus and Workflow Manager databases.
SBManagementDB
SBGatewayDB
SBMessageContainer01
WFManagementDB
WFInstanceManagementDB
WFResourceManagementDB
4) Install in the following order one at a time through Web Platforms Installer:
Workflow Manager 1.0
Service Bus 1.0 CU1
Workflow Manager 1.0 CU1
Regards,
Rebecca Tu
TechNet Community Support

Crystal Reports PrintToPrinter - The process was terminated due to an unhandled exception

Hi,
I am having a real problem with Crystal Reports in an application built using Visual Studio 2013.
Sometimes (in fact nearly all the time, but not always) whenever I call PrintToPrinter, I get the following error:-
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: exception code c0000005, exception address 37A9D5DC
I have two projects that wrap the functionality, one a Windows Service and the other a Console application.
I will attach a sample of my code, but at the moment I am testing using the console application for testing and this error always terminates the application completely. I have added all sorts of exception handling to try and stop it terminating the app, but to deal with the exception gracefully. Nothing however works, it always terminates the application completely.
The strange thing is that this only happens when calling PrintToPrinter. If I use export functionality such as ExportToStream, everything is absolutely fine and I don't get any errors.
The application always works fine on my development machine as well printing to an Epson WF-3540, it just falls over when deployed to the live server.
The application is developed in Visual Studio 2013.
It uses .NET Framework 4.5.1.
The printer that we are printing to that causes the issue is an HP LaserJet P3010 Series PCL 6
All Crystal Reports For Visual Studio are patched to the latest versions on the live server (13.0.5.891)
I am at a complete loss and any help or guidance would be very much appreciated.
A sample of my code is attached
Many thanks in advance.
Simon

VS 2013 is not supported until SP 9 due out end of this month
Don

ATP Re-Run in background processing for sales order

Hello All,
In sales order i need to re run the ATP check for the quantity confirmation in background processing.
Scenario is :
I have created orders with order quantity 100.
while creating the order stock for the same material was only 20 so ultimately it will not confirmed the quantity.
After the some period i m increasing stock of same material by 120. Now, same order which i created before can be confirmed as i need only 100 quantity in that. but for the same I need to manually run the ATP again and then it will confirm the quantity.
instead of manually re run the ATP again i want to do this activity in background processing so that it will automatically confirmed the stock once inventory increased.
Is there any provision in sap to avoid this manual task with the help of background processing or any program?
Thanks and Regards,
Rasik

Hi,
This can be achieved by rescheduling the orders .
<< Moderator message - Cut and paste response from http://help.sap.com/saphelp_470/helpdata/en/93/744c0c546011d1a7020000e829fd11/content.htm removed and points unassigned. Plagiarism is not allowed in SCN >>
You reach the Sales screen.
Select Environment ® Backorders ® Rescheduling ® Execute.
You can also simulate the backorders for rescheduling before confirming by selecting the simulateevaluate option.
Prerequisite for rescheduling the line items of the order is that at schedule line you should not flag the field fixed date and quantity field. Also for ATP you must have defined the scope of check with checking rule BO(i guess) for that particular plant in combination of checking group .
Hope this will help you.
Thanks and Regards,
Atulkumar Dagade
Edited by: Rob Burbank on Jan 24, 2012 10:16 AM

CORUPROC (Process chain for confirmation, collective background processing)

Hello Guru,
Can you please explain me the program CORUPROC (Process chain for confirmation, collective background processing) that can be use in SE38. and how it its important for CO16N (Reprocessing Incorrect Production Order)?
CORUPROC is also the same as CO1P transaction code.
Please explain the use of this program.
Thanks
Edited by: Ryan on Feb 3, 2009 7:55 AM

Hi Carina,
It might take some time for the attribute change run.
what you can do is right click on th running process , go to display messages and check if every thing is fine.
also goto batch monitor from there and see if the job is still running.
alternatively, if you are not sure if the job got strucked up, kill the job from batch monitor and run the attribute change run manually.
you got two options two do now.
1)Wait for some time for the process to complete and check the messages.
2)kill the job and run att change run manually.
i suggest you to go for option 1 and if it is taking too long ar there is any error message, analyze and then go for option 2
hope this helps.
cheers,
Srinath.
Edited by: Srinath Singamsetti on Aug 4, 2009 5:44 AM

Crash on quit due to background processes

Please help, I have a deadline soon. FCPx is crashing every time I quit. It hangs on stopping background processes when I can not see that there are any, and I have them turned off.
I have done a safe boot, wiped preference, and even created a completely new user on the mac. Nothing helps. Any suggestions would be greatly appreciated.

Thank you everyone for your comments and help. We had to push the release back two weeks for many reasons, some of them this issue.
But I thought my solution would be good to know for people. For the record I was attempting to edit at 4k with imported RED files converted to optimized media. What I didn't realize is that some of those clips were actually shot at 5 or 6k. I think that was one problem in and of itself, so I converted my projects to 1080p. Still got memory errors though.
So I think what solved the issue was when I flushed the cache by moving it outside the library. I think FCP had crashed while doing background renders from choking on some of the odd clips. I believe that corrupted some of the cache system, and wasn't fixed even when regenerating the cache files.
So I went to project settings and set the project cache to be outside of my project file in a folder I created. When doing so you are prompted to decide whether or not to move your current cache. I didn't, and this forced it to re-reender all those clips (but not the original optimized or proxy media). This seemed to clear up every problem I was having with Final Cut Running Out of Memory problems. I bet it was the cache, but could have been related to the mixed resolutions.
So I thought this might helpful to others searching this forum, and thanks again for everyone's help!

Asset values cannot be displayed due to missing text

Hi guru's,
I am facing the problem while i am displaying the asset values,i am able to create asset through as91 but when i go for awo1n system showing error" Asset values cannot be displayed due to missing"
help would be appreciated.
Thanks
Ravi

Hi Vyas,
I am getting error like below.
Asset values cannot be displayed due to missing texts
Message no. AY363
Diagnosis
The values of the selected asset cannot be displayed. Text elements are missing in logon language EN.
System response
Processing is terminated.
Procedure
First, check if you are logged on in a language that is maintained for this system.
This error can also occur, if the company code of the selected asset is assigned to a chart of depreciation that is not fully maintained.
In many cases, the problem can be corrected by re-importing the missing texts from the reference chart of depreciation. You can do this using repair program RACORR14. Refer to SAP note 0773639 for more information.
Thanks
Ravi

RAC instance won't start: ORA-00443: background process "VKRM" did not star

I've logged a SR with Oracle, but while waiting for response from them...I'm stumped I can't find more out here about this article.
On Oracle knowledgebase...any search for VKRM, gives about the same 3 articles relating to RDA (Remote Diagnostic Assistant).
Not sure what went on here.
I have a 5 node RAC cluster. All other instances seem to be running just fine.
On one instance...some applications were getting an error like:
ORA-01033: ORACLE initialization or shutdown in progress
I looked in GRID...and it indicated that only two of the 5 nodes had this instance running...which was strange in that with srvctl, it showed ll 5 up and running:
[oracle@server2 bin]$ ./srvctl status database -d INSTANCE
Instance INSTANCE1 is running on node server1
Instance INSTANCE2 is running on node server2
Instance INSTANCE3 is running on node server3
Instance INSTNANCE4 is running on node server4
Instance INSTANCE5 is running on node server5
Anyway, thought I'd poke around. I started with trying to get srvctl to stop instance #2...in GRID it seemed that instance 2,4 and 5 weren't working.
srvctl stop instance -D INSTANCE -i INSTANCE2
This just hung...
I thought I'd cycle all the nodes...so, did a ctl-c out of that one, and did:
[oracle@server2 bin]$ ./srvctl stop database -d INSTANCE -o abort
PRCD-1124 : Failed to stop database INSTANCE and its services
PRCR-1065 : Failed to stop resource (((((NAME STARTS_WITH ora.instance.) && (NAME ENDS_WITH .svc)) && (TYPE == ora.service.type)) && ((STATE != OFFLINE) || (TARGET != OFFLINE))) || (((NAME == ora.instance.db) && (TYPE == ora.database.type)) && (STATE != OFFLINE)))
CRS-2675: Stop of 'ora.instance.db' on 'server5' failed
CRS-2675: Stop of 'ora.instance.db' on 'server4' failed
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
The ORA-01034 messages repeats a number of times...and the one with server4 and server5 repeated again too.
I also got this:
CRS-2680: Clean of 'ora.instance.db' on 'server2' failed
CRS-2675: Stop of 'ora.instance.db' on 'server5' failed
CRS-2675: Stop of 'ora.instance.db' on 'server4' failed
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
I get similar messages when I try to restart.
clusters seem to be up, and other instances seem to be ok
Looking at alert log...I found some strangeness in the traces
Starting background process VKRM
Errors in file /u01/app/oracle/diag/rdbms/instance/INSTANCE2/trace/INSTANCE2_dbrm_26982.trc:
ORA-00443: background process "VKRM" did not start
Errors in file /u01/app/oracle/diag/rdbms/instance/INSTANCE2/trace/INSTANCE2_ora_27467.trc:
ORA-00450: background process '' did not start
Errors in file /u01/app/oracle/diag/rdbms/instance/INSTANCE2/trace/INSTANCE2_ora_27467.trc:
ORA-00450: background process '' did not start
Error 450 happened during db open, shutting down database
USER (ospid: 27467): terminating the instance due to error 450
LGWR waiting for instance termination
Instance terminated by USER, pid = 27467
ORA-1092 signalled during: ALTER DATABASE OPEN...
opiodr aborting process unknown ospid (27467) as a result of ORA-1092
Looking at the trace listed above:
2011-05-09 12:17:18.305726 :84271119:db_trace:ksb.c@2157:ksbs1p_real(): [10254:6:464] KSBS1P: process DBRM trying to start background VKRM
2011-05-09 12:17:18.305729 :8427111A:db_trace:ksb.c@2220:ksbs1p_real(): [10254:6:464] KSBS1P: process DBRM obtained PR enqueue to start background VK
RM
2011-05-09 12:17:18.306021 :8427111D:db_trace:ksb.c@2354:ksbs1p_real(): [10254:6:464] KSBS1P: creation error posted OER(1089)
2011-05-09 12:17:18.306029 :8427111F:db_trace:ksb.c@2424:ksbs1p_real(): [10254:6:464] KSBS1P: out of loop: process did not start
Trace Bucket Dump End: default bucket for process 6 (osid: 26982, DBRM)
ORA-00443: background process "VKRM" did not start
kskdbrmpa: reply error 450
Any ideas? Again...I can't seem to find much of ANY information searching out there for the VKRM background process not starting...
Thanks in advance,
cayenne
Edited by: cayenne on May 9, 2011 11:34 AM

Anyone? Anyone? Bueller?
Ok..have been on phone with Oracle support, and have them stumped so far.
I've checked..other instances are running (except one other that failed to cleanly shut down with srvctl and same error messages).
I've check...ASM is running on all 5 nodes. I've used crsctl to check CRS on all nodes..clustering seems ok.
Memory while somewhat high...should have enough room...the system has never complained before, and this has been up on this config for over a year.
I was able on node one...to fire up the first nodes instance using the pfile there...it came up. I started it restrict..and promptly ran a datapump export, and then shut back down.
While Oracle support is going through logs and trace files I sent...I've got another 11Gr2 environment (3 node RAC) I've been using as a test environment...and am recreated the instance there temporarily to allow my developers to test and get past the upcoming deadline.
But, I'm still puzzled as to the solution on the main cluster. This seem to be normal, except these two instances....
any ideas on where and what to look for?
cayenne

Process Chain Termination issue.

Hi,
     I ran a process chain, its been terminated in the middle.
here is the message from log.
Process Execute InfoPackage , variant WBS Hierarchy has status Ended with
errors (instance REQU_AI8QGHV5KCC7KC1VSNGPRY9VF )
Process chain termination has been confirmed in meta chain
CE0BOS15OV4H1VDIEVZSFDEH8 , destination 'NONE '.
Looking forward to your solution.
Cheers
Senthil

what is the messege it gives in the display messege screen. if the load is successful how it will get terminated.
chk the details tab of RSMO.
is the load is for ods? then in the details tab chk for subsequent processing is failed? chk the error messege, hope this may be due to invalid records. correct it in PSa and push to ods.
if any thing else pl revert us
Ramesh

When running the workflow background process for drop shipment order, sale order line's status gets automtically closed instead of awaiting shipping

Hello friends,
I am created a drop shipment order with all the setups done . now i have booked the sale order as source type external. but when i run the workflow background process , after completing the report when i check the sale order line status it changes to "closed" instead of "awaiting shipping".
Plz guide me if i have missed something in the setups.
thanks,
Sachin

Hi Sachin,
pls check the below notes from MOS
Drop Ship Sales Order Cycle In Order Management (Doc ID 749139.1)
Vision Demo - How To Create A Drop Ship Sales Order/Purchase Order (Doc ID 1060343.1)
Thanks
-Arif.

TREX- process is terminating, because lockfile

Hi experts,
We recently implemented TREX to ease our search functionality within our ERP environment. Now its only implemented for DMS- document search within PLM. We almost done with the initial indexing, but stucked at last bit with error in trace file as below:
self_watchdo SelfWatchdog.cpp(00170) : process is terminating, because lockfile 'I:\usr\sap\TP9\TRX01\hcb-msap63\lock\TREXIndexServer..30103.pid' is missing/wrong.
Do you have any clue why this happened? We already restarted the server but the problem still persists.
Thanks.
Regards,
Thava

Hi Duncan,
I tried what you advised, stop the trex services. Then deleted TREXIndexServer_30103.pid from lock directory. Yet the indexing is not progressing, index failed with 200k documents and at the trace file same error Im getting
"2011-07-07 07:08:16.326 f self_watchdo SelfWatchdog.cpp(00170) : process is terminating, because lockfile 'I:\usr\sap\TP9\TRX01\hcb-msap63\lock\TREXIndexServer_30103.pid' is missing/wrong".
What can I do now?
Thanks.
Regards,
Thava

Regarding background processing

hi experts,
i have developed a report in which huge amount of data is involved so i decided to execute in the background,,,for this i created the variant and for back ground i wrote this code but when i execute this it gives an error plz help me to solve this problem sud i change something in the variant or in the function module....
report given here::::
REPORT ZBACKGROUND.
parameters:job(32) .
data:count like btcevtjob-JOBCOUNT,
     teamit like TBTCJOB-AUTHCKNAM.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
DELANFREP              = ' '
JOBGROUP               = ' '
    JOBNAME                = JOB
SDLSTRTDT              = NO_DATE
SDLSTRTTM              = NO_TIME
JOBCLASS               =
IMPORTING
   JOBCOUNT               = COUNT
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE:/ SY-SUBRC.
CALL FUNCTION 'JOB_SUBMIT'
EXPORTING
ARCPARAMS                         =
    AUTHCKNAM                         = TEAMIT
    JOBCOUNT                          = COUNT
    JOBNAME                           = JOB
   REPORT                            = 'ZRAW_PRODUCTION_REPORT'
   VARIANT                           = 'ZRAW'
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE:/ SY-SUBRC.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
    JOBCOUNT                          = COUNT
    JOBNAME                           = JOB.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE:/ SY-SUBRC.
error:::ShrtText
    Exception condition "INVALID_JOBDATA" raised.
What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
Error analysis
    A RAISE statement in the program "SAPLBTCH" raised the exception
    condition "INVALID_JOBDATA".
    Since the exception was not intercepted by a superior program
    in the hierarchy, processing was terminated.
    Short description of exception condition:
    Error in Job Data, See SYSLOG
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
Trigger Location of Runtime Error
    Program                                 SAPLBTCH
    Include                                 LBTCHU24
    Row                                     308
   Module type                             (FUNCTION)
   Module Name                             JOB_SUBMIT
ource Code Extract
ine SourceCde
278   GLOBAL_STEP_TBL-AUTHCKNAM = AUTHCKNAM.
279   GLOBAL_STEP_TBL-STATUS    = BTC_SCHEDULED.
280   MOVE-CORRESPONDING PRINT_PARAMS TO GLOBAL_STEP_TBL.
281   MOVE-CORRESPONDING ARC_PARAMS TO GLOBAL_STEP_TBL.
282   APPEND GLOBAL_STEP_TBL.
283
284   CALL FUNCTION 'BP_JOB_MODIFY'
285     EXPORTING
286       DIALOG              = DIALOG_FLAG
287       JOBCOUNT            = GLOBAL_JOB-JOBCOUNT
288       JOBNAME             = GLOBAL_JOB-JOBNAME
289       NEW_JOBHEAD         = GLOBAL_JOB
290       OPCODE              = BTC_MODIFY_WHOLE_JOB
291     TABLES
292       NEW_STEPLIST        = GLOBAL_STEP_TBL
293     EXCEPTIONS
294       CANT_ENQ_JOB        = 02
295       INVALID_NEW_JOBDATA = 09
296       OTHERS              = 99.
297
298   CASE SY-SUBRC.
299     WHEN 0.
300 *
301 *     Stepnummer ermitteln
302 *
303       DESCRIBE TABLE GLOBAL_STEP_TBL LINES STEP_NUMBER.
304
305     WHEN 02.
306       RAISE LOCK_FAILED.
307     WHEN 09.
>>>>>       RAISE INVALID_JOBDATA.
309     WHEN OTHERS.
310       RAISE JOB_SUBMIT_FAILED.
311   ENDCASE.
312
313 ENDFUNCTION.

Refer to these sample programs
http://www.sapdevelopment.co.uk/reporting/rep_submit.htm
http://www.kabai.com/abaps/z05.htm
REgards,
Santosh

Background processing - load distribution guidelines

Hello,
We are using the HR module (ESS/MSS type Web application) in an ECC6 system.
Due to the business needs we need to run heavy interfaces job.
Basically the interfaces background jobs would turn round the clock and we fear this will impact the end users running the dialog transactions.
While we can scale up the environment I was wondering if there are any guidelines or best practices from SAP regarding SAP background processing and interfaces. Recommendations like running interfaces background jobs outside businnes hours. Or anything similar that could help us approach the topic in a good way.
Currently we fell that we will misuse the system and we will generate a big impact on the end-user dialog performance.
Any hint is greatly appreciated,
Kind Regards,
Florin

you can use logon load balancing in scheduling those background jobs,
Re: Scheduling background job on Logon group
Re: Scheduling background job on Logon group
or you can speficify some particular jobs to be run only on application server so as to avoid the load in CI
and following also might help you
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7f39505211d189550000e829fbbd/frameset.htm

Background process zffd terminated due to missing confirmation

Similar Messages

Maybe you are looking for