Background refreshing of query in BI 7

Hi,
We have upgraded Bi from 3.1 to BI 7. Our immediate need is we want to refresh query in background and want to mail to specifiv user group insted of manual refresh.
can u pls share documents which will give stepwise details for doing the same.
Regards,
Vrushali.

Hi,
Use Information Broadcasting with auto refresh time interval through WAD. Information broadcasting is a technique to automate the query run and being sent as an email attachment to relevant user.

Similar Messages

  • Background refresh does not work as expected

    Hello All,
    I am brand new to iphone after using Android for several years, one thing that is really bothering me is the way certain apps seem to behave and how the background app refresh seems to have no affect when on or off.
    The examples I will use is Whatsapp & Kik (Both messaging apps)
    If someone sends me a message on either of the above then I get an alert saying 1 new message, however that message doesn't download to my phone, what seems to happen is when I open the app it says "connecting" at the top of the screen for a while and it takes a few seconds (sometimes longer) for the message to appear. If I have poor signal it is very frustrating, I know I have several messages and my phone says that, but because I cant connect it just goes round in circles for ages saying connecting and failed and i cannot read my messages until i have full signal again.
    On the android, if I got a notification to say I had a whatsapp message then that message would download automatically, even if I had no signal at the point of opening the app then it would instantly show the new message, because it had downloaded it immediately in the background, of course I couldn't reply with no signal but at least I could read it which i cant with the iphone.
    so, my understanding of Background refresh would be that it would resolve my issues, if the app updates in the background and i get a message, surely that means when I open it 20 minutes later that the new message would be present? but it's not, even with app refresh on it makes no difference to what I'm saying.
    Am I reading app refresh all wrong and can anyone see my point and explain if I'm doing something wrong.
    sorry to bang on but another example could be facebook, if i dont go on it all day but have app refresh on and have the task open, surely when I eventually load it it should have all the latest feed on my timeline - but it doesnt, it will be exactly as I left it the day before and would spend the first 30 seconds updating.
    Please please feel free to comment and let me know if I'm doing something wrong or misunderstanding the backgound app refresh function
    My phone is the iPhone 5s and is on the latest IOS 8.1.1 but was the same on 8.1.0 and whatever was previous to that.
    I am on the three network pay monthly and all issues i mentioned about relate to being on 3G and on wifi so it's not a signal issue.
    I'm soooo confused :/
    Thank you

    I Have your same question, I don't understand the advantages of keeping the app refresh on....

  • Error message while refreshing a query

    Hi All,
    I get a error message when i try to refresh a query, the message is "Can only refresh this query against server running 2.0 or higher". Can anyone tell me what exactly this means??
    Thanks in advance
    Kelly

    Hi Kelly,
    Hope you are running the query from Bex. Try running the query in RSRT and check for any error message. Also check for any short dumps in ST22.
    Bye
    Dinesh

  • System error when I refresh a query/WB

    Hi All,
            When I refresh a query/workbook getting following error message and can not proceed further..
    <b>Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01</b>
    We are using BW 3.5 and BEX reports.
    I'd appreciate if you could help me on this
    Thanks
    BI Consultant

    What variables are you using in your query? This error essentially occurs when the variable values are not correctly transferred resulting in a high volume data selection. Do you have any mandatory variables in the query? Are they getting filled the first tiem round?

  • Refresh a query, by assigning macro to a object

    Hi,
    I am trying to use an object on a worksheet to refresh a query on another worksheet. I am not quite sure how we do it.
    I looked at the thread, BEx query refresh macro
    But, i do not how to use it. please provide suggestions as to how to proceed?
    Thanks,
    raj

    reposting for suggestions, did not solve my problem yet.
    so far what i know is, i have to assign macro to the object but, do i need record the refresh query or do i need to call the standard funtion,
    "Sub SAPBEXonRefresh(queryID As String, resultArea As Range)
    End Sub"
    But, how do i call or assign this as a macro to the object
    peter knoer, can you provide suggestions?
    Thanks,
    raja.

  • Please select a valid InfoObject appears while refreshing a query

    One of the users is trying to refresh a query (showing a hierrachy). While refreshing the user gets the following message: "Please select a valid InfoObject". I just talked to the user and she is saying it appears from time to time. Does any of you had such problem? What is wrong?

    Hello Jesper,
    We got the same problem after upgrade. We have applyed the note you talked about in your post. It fixes the issue.
    Thank you.
    Best Regards,
    Pierre.

  • Prevent Excel from recalculating when refreshing a query within a workbook

    Hello,
    I have a BEx workbook with 4 queries and a significant number of Excel formulas retrieving and rearranging query data.
    **The issue**:
    When Excel>Tool>Options>Calculation is set to "Automatic" (as it should be in normal situations), refreshing anyone query takes about 2 hours.
    When Excel>Tool>Options>Calculation is set to "Manual", refreshing anyone query takes about 2 minutes.
    Therefore I conclude that BEx does not prevent Excel from recalculating during a query refresh and this cause unacceptable delays.
    **Question**
    Is there any way to prevent to temporarily prevent Excel from recalculating during a query refresh ?
    Thank you.
    Louis

    I have a star schema, ie 5 FACT tables and 7 dimension tables, All fact tables share the same dimension tables, some FACT tables share 3 dimesnsions, while other share 5 dimensions.  
    I did adopt the best practices, and as recommended in the book, I tried to resolve them using Context, as it is the recommended option to Alias in a star schema setting.  The contexts are resolved, but I still have loops.  I also cleared the Multiple SQL Statement for each context option, but no luck.  I need to get this resoved ASAP,
    I checked all the context and they look fine, however when I again go to detect context it asks me to add the context which is already present.  It give me an option to overwrite?  Besides, I also get some Alias options.  However I was told and it was mentioned in the book that Alias is not a good option to resolve loops but context is when you have a STAR SCHEMA.
    Please suggest idea.
    AP

  • Refresh BEx-Query with variant

    Dear all,
    i have a question about refreshing Queries with variants.
    To refresh a BEx-Query (BW3.5) in a Workbook with VBA is no problem.
    For example:
    Run "SAPBEX.XLA!SAPBEXrefresh", False, myRange
    But is there a possibilty to refresh a BEx-Query with a variant (also with VBA)?
    My target is to create a VBA-Tool:
    1 which user can select a single Query and the available variant.
    2 Then push a VBA-Button
    3 After the selection no Variable-Screen will pop-up
       and the refreshing is completed.
    Thanks all

    Hi Ashok,
    refreshing Queries automatically on Workbook open is standard...
    What i need is to refresh a Query with variant (saved variable-values for a query e.g. the name of the variant is "ZMYVARIABLES").
    The user should not select an existing variant (ZMYVARIABLES)
    manually with Shift+F5 (Get Variant) on the Query-Variable POPUP-Screen.
    What i need is a codefragment which implement that all.
    Pseudo code:
    Sub RefreshQuery(QueryID As String, Variantname As String)
    End Sub
    Thanks,
    Erol

  • Trouble on refresh BO Query

    Hi,
    I have a  model in spreedsheet, that contains BO queries (not web intelligence reports), that use Live Office Connections. These refresh whenever I change de value of a cell, the value of one of them has a formula. For example:
    cell A1---> 2010
    cell A2--->=A1-1
    The problem is in the results in the BO queries. The value of the cell A2 change but not refresh de query. Previously, I configurated de properties of the BO Query, on tab "Request", I have linked the value cell.
    I have an other question, what do you recommend? a bo query  on spreedsheet use live office connections or web intelligence use live office connection?
    Any idea what's the problem? and how can I solved it?
    Thanks

    Hi,
    Try to use the grid component to verify what exactly shows up when in both the cells in runtime. This way, you will see what actually is happening in spreadsheet.
    Your second question: I would say that use the Web Intelligence query whenever you expect data from a formatted kind of report. The other option may be more useful in case for raw data.
    Regards,
    Gaurav

  • How to refresh a query in Portal?

    Hi Friends!
    I have a query (bex) which is published in portal.
    I need refresh the query but I dont see any button for this.  How can I do it?
    note: I need refresh only the query, not all the web page .
    Thanks!!

    closed

  • Battery and background refresh control issue in iOS8

    Hello,
    I updated my iPhone 5 to iOS8 yesterday night. This morning my battery was at 100% battery when I arrived at the office at 8, and after 4 hours, it dropped to 23% without any specific usage, only receiving few emails.
    When I went to the battery usage, I see that background activity is using the battery from Facebook and Hangouts apps. But I go to the Background App Refresh menu, I see that I already deactivated the background refresh for these two apps (see screenshots below).
    I bought my iPhone 5 in  July this year. It was completely new.
    Is there any issue with Background App Refresh settings?
    Why is my battery dropping so fast?

    Facing The Same Issue ! Charged To 100% And In The Morning It Dropped 10%(89-90%). I Did Not Even Use The Phone Afrer The Charge !! This Issue Has Been Affecting My Phone Since I Updates iOS-8 . When I Had iOS 7.1.2 It Was Absoluely Fine ! And The Other Issue I Am Facing Is On Diagnostics And Usage Which Is Showing Me Sort Of Stacks+backboardd . The Log Is Appeared In Every Hour ..! What Is Wrong With Apple Devices ! Every A Time Something Or The New Comes :/

  • Refreshing ADF Query Component after changing some property of a criteria

    Hi All
    Use Case : Refreshing ADF Query Component after changing some property of a criteria attribute.
    I have a query panel with 2 query criteria i.e. FirstName and DepartmentId where in DepartmentId is a drop down. The scenario is like when change the value of DepartmentId to 'Finance' with code value of '100' then my criteria attribute 'Firstaname' should be invisibe(queriable=false).
    Approach: Have overriden the queryOperationListener of adfquery as " queryOperationListener ="#{backingBeanScope.backing_queryLstener.processQueryOperation}" "
    My backing bean method goes as below :
    public void processQueryOperation(QueryOperationEvent queryOperationEvent) {
    // Add event code here...
    if( queryOperationEvent.getOperation().equals(queryOperationEvent.getOperation().CRITERION_UPDATE) ){
    DCBindingContainer bindings = (DCBindingContainer)this.getBindings();
    DCIteratorBinding iter =bindings.findIteratorBinding("EmployeeView1Iterator");
    ViewObjectImpl voimpl = (ViewObjectImpl)iter.getViewObject();
    ViewCriteria vc = voimpl.getViewCriteriaManager().getViewCriteria("EmployeeViewCriteriaDemo");
    Row currRow = vc.first();
    System.out.println("Department :"+currRow.getAttribute("DepartmentId"));
    if( (Integer)currRow.getAttribute("DepartmentId") ==100 ){
    AttributeDef[] attrs = voimpl.getAttributeDefs();
    int attrIndex = voimpl.getAttributeIndexOf("FirstName");
    ViewAttributeDefImpl attrDef = (ViewAttributeDefImpl) attrs[attrIndex];
    attrDef.setQueriable(false);
    // AdfFacesContext.getCurrentInstance().addPartialTarget(getQryId1()); //here i need to refresh the query component which is not happening
    // refreshQueryComponent(getQryId1());
    Everything is happening as expected but the query panel s not get refreshed.When i refresh the whole link/page then i can see the change.
    Please suggest.
    Thanks in adv.
    -Sanjeeb

    Hi,
    can's say anything about the first part of the question as more insight to the implementation would be required. However, have a look at http://www.oracle.com/technetwork/developer-tools/adf/learnmore/83-bidi-synchronization-tree-form-401841.pdf, which may be what you are looking for
    To the second part: You can programmaticallly refresh the tree component from a managed bean. So instead of using the declarative PPR option (or ChangeEventPolicy set to PPR on the iterator binding) you can wire the submit button to the managed bean, perform your validation and if it fails don't refresh teh tree
    The call is
    AdfFacesContext.getCurrentInstance().addPartialTarget(the_tree_instance)
    Frank

  • Background Refresh

    Hello everyone,
    I finally figured out the cause of a "problem" I used to have with the supposedly failing background refresh of the Podcasts app. In all the discussions here and elsewhere about similar problems, I had never read anything about the cause of "my" problem, so this might help other people as well and I would like to share my new insights (that everyone else might already have -- in that case, sorry for posting).
    It used to drive me mad that I never experienced the new version of the Podcasts app to download new podcasts in the background. Instead, I had to open the app to start the update process. I had even spent quite some time on the phone with an Apple technician, reset all my settings etc., to no avail. Since this was not the only thing that upset me with the Podcasts app (also: severely messed-up iTunes sync, not enough configurability), I finally switched to Downcast.
    Ironically, a short time after I realized that I had to share some of the blame. Background literally means "background". When you kill the app in the app switcher by swiping upward, it won't ever update any podcast regardless of  background refresh or push notification settings (although, of course, from a customer perspective this would be desired behavior). No app will ever become active again by itself, unless you leave it "open" in the background. I would have hoped that iOS wakes up correspondingly-configured apps (at least others from Apple) periodically. However, after looking into iOS functionality a bit, I realized that this is not desired by system design.
    I find it amazing that this simple fact was -- as far as I could see -- never mentioned in any forum and also never brought to my attention in those long discussions with Apple support.
    Since everything else mentioned above is still messed up with the Podcasts app, I will stick with Downcast nevertheless. I guess I can't blame Apple for malfunctioning background refresh anymore, but I would still blame them for publishing a still-messed-up app, and for failing to clarify to a person like me what "background refresh" actually means.
    Out of curiosity: Was this clear to everyone, and am I stupid? Or does this post actually help more than one person?

    I Have your same question, I don't understand the advantages of keeping the app refresh on....

  • How to enable greyed/disabled option "Enable background refresh in excel" in data connection properties

    In Excel file,
    Under what conditions, "Enable background Refresh" option will be disabled in Data Connection properties.
    I got one file, which has this option disabled and I need to enable this option.
    Please help

    This property in the connection can only make sure the pivot table to refresh the PowerPivot data have already been loaded into PowerPivot from external data source rather than keep PowerPivot data the same as external data.
    Please check if the article below is helpful:
    http://blogs.msdn.com/b/analysisservices/archive/2009/11/20/powerpivot-data-refresh.aspx

  • Background Refresh App Not Available After Turn off it

    I've been turn off an app from background refresh list and the app is not more available on it.
    I tried to remove the app and re-install, but the app doesn't appear on the list.
    Anyone have the same problem?

    I read somewhere in the forum, that the recovery mode can be entered by turning the tablet on while pressing power on and volume-up at the same time (and leaving pressed). If that doesn't work try it with power-on and volume-down.

Maybe you are looking for