Background task ... Showing Error Agent not Assigned

Hi Friends,
I have created a background task in workflow, but when the workflow is triggered it stops at that steps stating "No agent Found"
But Why background job needs agent Assignment.
Thanks and Regards,
Rajlaxmi Singh

I have done this, but then still its telling no agent assigned.
this is a customized BOR, not a subtype of any super type. I have created a method in this which give the kist of users in the internal table ... it doesn't import anything....... I have just checked synchronous checkbox while creating the method. Now in Task i m doing the binding .... and keeping it as background task with classification as general task. Still its showing error

Similar Messages

  • Error:System not assigned to a host

    Hi,
    I am trying to download maintenance stk SRM 7.0 SPS 5.0, via solman, but I am getting the error called  "Error:System not assigned to a host" in the stage where solman looks for OS/DB dependent files.
    When I go back and check the entries in SMSY, all the relevant entries are present there..
    Could anyone has encountered this before?
    Thanks
    Abhishek

    >
    Abhi wrote:
    > Hi,
    >
    > I am trying to download maintenance stk SRM 7.0 SPS 5.0, via solman, but I am getting the error called  "Error:System not assigned to a host" in the stage where solman looks for OS/DB dependent files.
    > When I go back and check the entries in SMSY, all the relevant entries are present there..
    > Could anyone has encountered this before?
    >
    > Thanks
    > Abhishek
    Hi Abhisek,
    are you sure that is in TX "smsy -> Systems -> <your SID> -> logical Component -> Header Data" an entry at the field "message Server" ?
    I think that is meant with host.
    regards
    Tobias

  • HT3204 when accessing the itunes store it is showing error message not connected to internet.   But computer is connected to internet

    when accessing the itunes store it is showing error message not connected to internet.   But computer is connected to internet. Plz I need  help

    Naomi Blewit wrote:
    Hi,
    I am going on iTunes and it is saying that I am not connected to the internet but I am. I was on iTunes last a few days ago. Please help...
    iTunes is a program on your computer, it is not "the Internet".  The fact that the program runs has no bearing on Internet connectivity.
    Maybe if a little more information was supplied, like version of the Operating system on the computer and version of iTunes, then a little more assistance could be provided.

  • I am using ipad mini ... I was unable to access facebook since long time... Its shows error could not communicate with the server.... I had install it but result was same. Can anyone help me???

    I am using ipad mini ... I was unable to access facebook since long time... Its shows error could not communicate with the server.... I had install it but result was same. Can anyone help me???

    first off , from the wired computer access the router using http://192.168.1.1 .. check the firmware version .. go to www.linksys.com/download and check the latest firmware available...if the router does not have the latest firmware , upgrade it first. .. after the firmware upgrade , reset and reconfigure the router
    if the router has the latest firmware , then reset the router for 30 seconds .. do a power cycle...access the router ui ..default password is admin..click on the "mac add clone" subtab , enable it and click clone....save the settings and do a power cycle..ensure that the wired computer is online
    on the router web ui , click on the wireless tab ..change the ssid - any non-linksys name , channel - 11 , security mode - wpa , beacon interval - 50 , fragmentation threshold - 2306 , RTS threshold - 2307 ..
    let me know if this helps you..

  • Background Task running under initiator not under WF-BATCH

    Hi All,
      I am trying to resolve a problem with a Background task running under intiator. Since the initiator does not have authorization to execute the task, it is not working.
    My understanding was, all background tasks will run under WF-BATCH!!. Is it correct?.  in 4.7, it is working this way.
    However in ECC 6.00  the background task before the first dialog work item is executed under 'intiator' in this case.  I have moved the same task after first dialog work item, and it was executed under WF-BATCH.. I cannot move the task after the dialog workitem as the task need to be executed immediatly after the creation of workflow.
    1. How can I run the task in backgroud under WF-BATCH?
    2. Inside the task, I am running a BDC to update a flag in downpayment transaction created using F-47. How can I run the process under batch user to overcome the authorization issue that initiator will not authorization.
    I am running this workflow in SAP ECC 6.0 level 13
    Any help is really appreciated..
    thanks in advance for your help.
    johnson

    This issue can be resolved with triggering the event using the additional flag export parameter 'CREATOR' in function module  ''SWE_EVENT_CREATE_FOR_UPD_TASK' as WF-BATCH. I was not passing this parameter and hence it didn't work in ECC 6.0 as it take who ran the process as creator and ran the background task under that users id.
    Thanks Rachid for your input to resolve this problem.
    johnson zavier

  • WEB Service task excuting error "method not found"

    Hii All,
    I am the beginner of ssis, and on executing the package I am getting error :
    [Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Method 'ProxyNamespace.BizTalkServiceInstance.Submit'
    not found..
       at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
       at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser)
       at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
    Please help me out..

    Hi Mangla,
    Based on my research, the issue always caused by the data type of input variable mismatch for the Web Service. For example, the input type for web service is String. The variable was of type Object but in fact it was a Decimal stored in it. Obviously SSIS
    Web Service Task will not implicitly do a .toString() call on the input variable. So the issue occurs.
    To fix this issue, please change the type of the variable. For more details, please refer to the following similar thread:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/1073ad37-ed05-4ab4-85e3-689e1cd17a68/ssis-web-service-task-error-with-wcf-service
    Besides, SSIS cannot invoke services with spaces in the names. And we should configure the HTTP connection manager the following ways:
    Use credentials.
    Use a client certificate.
    Provide a time-out for connecting to the server and a chunk size for writing data.
    Use a proxy server.
    Reference:
    HTTP Connection Manager
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • When trying to install nwds tool , showing error message not properly insta

    hi ,
    when i am trying to install nwds in system, it showing error message at the end stage.
    The following program files could not be registered:
    *     c:\windows\sapwksta\setup\splash.dll*
    *     c:\program files\common files\sap shared\wdadobecontrol.dll*
    *     c:\windows\system32\librfc32.dll*
    *     c:\program files\common files\sap shared\sapchart.ocx*
    The installed applications may not function correctly until all program files are successfully installed.
    what is the problem. when i am click on nwds icon on desktop, it showing error message
    c:\program files\sap\ide\ide7.0\eclipse\sapide.exe is not valid wid 32 applicaiton.
    i installed java and gave environment variables settings . it is not a problem.
    please give reply

    Hi Sujana,
    I am also faced the same issue when I install the NWDS softward.
    Reason: Maybe you have install higher version NWDS.Beside that SAPGUI will also use librfc32.dll.
    Solution: Please delete librfc32.dll in c:\windows\system32 and install again
    I have did the same thing, itsh installed successfully.
    Hope it shold works fine.
    Regards,
    Venkata Ramireddy

  • TS3694 HELLO m not able restore my iphone 5 showing error (1) not minus one please help me out.

    hELLO Mnot able restore my iphone5 getting error (1) not a minus one please letme help please,

    hello yak-yak, no excuses needed. Your questions are clear enough, well done!
    There a LOT of people having problems with the giant step forward (forward?) of iOS7 and the step must be even bigger coming from iOS5.
    There are hundreds of extra settings in iOS7 and they are often placed in another group... requires an extended study .
    a. People are having "technical" problems, like battery depleting fast, no EiFi, no mobile connection, and so on.
    b. People are having perception problems, dizziness, low contrast, small lettering, etc.
    c. People are having problems finding their way in the settings, as you have.
    Especially the b category problems are annoying.
    I can only suggest that you make yourself comfortable and study all settings, then make yourself even more comfortable and attack the irritatng issues, you can start reading here for that:
    http://www.digitaltrends.com/mobile/ios-7-problems/
    on which site you find several approaches for some problems in all the three categories.
    BTW the error 3194 did it come back?

  • Error Workflow not assigned to business object

    Hi Team,
        I am working on CRM 7.0 system
         I have a Z business object ,and I have created a new workflow and called one of the method of the z business object.
    And I am trying to trigger this workflow through a action definition based on status.while creating the action definition with respect to workflow I am getting the error "assigned BOR object type is not used in any workflows"  no F4 values
          I have debugged and found that the entry in the table SWDSCNTIDX is not correct.
    Kindly request you to guide me how to assign workflow to business object or how can I refer the workflow what I have created in action definition.
    Regards,
    Poornima

    Hi,
    You have to go the workflow change container element of that BOR e.g. "BUS2010030" and on tab "properties" check the checkbox "IMPORT" and "MANDATORY".
    Doing the above BOR will be available in the F4 help of actions profile wizard or conditions.

  • HT201263 not able to activate my iphone 3gs showing error sim not inserted

    after i have restored my iPhone , its not activating. error is shown on iTunes that sim not inserted . i have already inserted a sim and its activated and properly working.

    Is there a sim in the iPhone?
    Has the computer you are connecting with been used to
    hack or jailbreak an iDevice in the past?

  • HP 5610v All in One continually showing 'error; and not printing

    Have uninstalled and reinstalled in last couple of days but goes back to same 'error' failure to print.

    Hello Aljones,
    Welcome to the HP Support Forums!
    I see that you have been working hard trying to get the Deskjet 3050a working once again on your Tablet. What is the type of Tablet and the Operating System installed on it?
    Are you able to print with the HP ePrint Mobile App? Getting Started with HP ePrint Mobile Apps<---
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Product hierarchy is showing 'Not assigned Materials' in Bex Report

    Dear Gurus,
    I have loaded product hierarchy to 0material from 0PROD_HIER_LPRH_HIER successfully. In Bex report if i use product hierarchy nothing showing to me and it is showing message in one row like 'Not assigned Materials.
    If i remove the Hierarchy i am able to see all materials in the report.
    I have searched in sdn but i didnt get any help.Please help me in this issue.
    Thanks & Regards,
    chandu

    Hi Ravi,
    I have run the Hierarchy change run for 0material.but again it is showing same message 'not assigned materials'.
    Regards,
    chandu

  • Alarms not appearing for events - Agent Not Responding

    Hi
    I'm hoping someone may be able to help with a frustrating issue.
    I have a setup with SunMC 4.0 monitoring approx 15 SunMC agents. The problem is some of these agents are not displaying alarms for events that occur.
    E.g. if I trigger an alarm on a host by say filling up a filesystem, on some hosts an alarm will appear in the Alarm tab as exepcted, but on other hosts no alarm appears and hence I cannot acknowledge the alarm.
    After doing a bit of digging I have found the following:
    1) When the event is triggered on the client the trap is sent to the server
    2) The server then tries to communicate with the agent on the client and I see this error in the event.log
    [012578fd 0086 ]info Jul 28 14:59:06 event eventmgr: sending snmp collection request to XXXX 1161 XXXX for startline 0...................................................................
    [012578ff 0098 ]error Jul 28 14:59:06 event eventmgr: event collection failed for XXXX 1161 XXXX line 0 - error {} {Agent Not Responding}.................................................
    3) If I snoop between the 2 servers I can see communication between the server and the client on port 1161 so dont believe it is a network issue
    4) I have tried uninstalling and reinstalling the agent. This strangely cured it on one server with the problem, but on another server the problem persists even after reinstalling the agent multiple times
    5) I have logged into the postgress database and can see that events are not being logged in the events table (hence not being displayed in the Sun MC console).
    6) I have tried reseeding the agent and that makes no difference
    7) I have ensured the agent is listening on one network interface by adding snmpBindAnyAddr = "0" to the agent section of the domain-config.x file
    I am not sure where else to look for pointers as to what is going on. What beats me is that the servers which the agents are running on all have identical builds built from jumpstart and are on the same network, yet some work and some dont!
    Any help from anyone greatly received...
    thanks

    Hi there,
    I found a solution to get the alarmflow going again:
    1. Delete the node from SunMC Java Console
    2. Stop the agent
    3. Remove all logfiles in /var/opt/SUNWsymon/log
    4. Start the agent
    5. Wait 2 minutes and add the node in SunMC Java Console
    After these steps I can see alarms coming through and when adjusting thresholds I can trigger new alarms which show up on the Hostview Alarms tab.
    Unfortunately, this only seems to be a temporary solution, at least for some nodes.
    Anyway, I figured I'd share this info with everyone. Maybe it will help with your investigation and if someone finds a permanent solution please feel free to post it here ;-)
    Best Regards,
    Emerald

  • Navigational attribute: "not assigned"

    Hi all,
    I have a strange situation where I have a characteristic (0NOTIFICATN) in a cube (0QM_C10), where the (navigational) attributes of 0NOTICATN show up as "# not assigned" when I try to report on them.
    I have checked under master data maintanence for 0NOTIFICATN that for all notification the attributes have the value I expect.
    The attribute I am most interesed in is notification type (0NOT_TYPE), and I have found out that if I add the infoobj 0NOT_TYPE to the cube I can report on it. That means that instead of getting the notification type as an navigational attribute on notification I have to add it to the cube...
    (The same argument holds for several other infoobjects and several cubes.)
    Am I missing something obvious here?

    Thank you. That solved the problem.
    That is, it works in other cubes, that had the same problem, but it does not work with the cube 0QM_C10 that I have modified several times during my debugging...
    I get the error, that the infoobject 0NOTIFICATN__0NOT_TYPE does not exist. I have checked that 0NOTIFICATN is in the cube and that it is a navigational attribute.... 
    Regards,
    Christian

  • Smartform in background task

    Hi,
    I have the following code which is a copy of standard program /bev1/vd_bew_lief_background:
    IF nast-vsztp = 4.
    CALL FUNCTION 'ZUAM_FMDELNOTE' IN BACKGROUND TASK AS SEPARATE UNIT
    ELSEIF sy-tcode = VL71 OR
    sy-tcode = VL02N OR
    sy-tcode = VL03N.
    CALL FUNCTION 'ZUAM_FMDELNOTE'
    ELSE.
    CALL FUNCTION 'ZUAM_FMDELNOTE' IN BACKGROUND TASK AS SEPARATE UNIT
    And inside this FM I have a call to print a smartform. When it goes in the second if block there is no problem, the smartform gets triggered. But when it goes to the 1st or 2nd, the one with in background task, the smartform is not triggered.
    Is smartform allowed to be called in background processing?
    Or there other things that I should check?
    Thanks.

    Does your smartform has a Dialog pop up?
    If yes, you have to suppress it, as dialog and background don't go together.
    You have set cetrain parameters in the Smartfrms function module in order not to get the pop up dialog.
    REgards,
    Ravi

Maybe you are looking for

  • How to run a bat file in java

    Hi, my program needs to use an outside batch file command, for instance, its name is "generateXML", its syntax is [command prompt] : generateXML sourceFile.dtd XMLFile.xml I want to include this command into my code so that do that and other things a

  • How to disable drilling of a hierarchical columns

    Hi , I have a Product dimension defined as Dept -> Class-> Subclass -> Item. In one if the reports that uses this dimensions, I want to disable the drilling to lower levels of hierarchy. Can you please suggest the best way to achieve this? Thanks

  • Function and procedure execution

    hi all, i have question in procedure execution and function execution oracle database. i want know that which is faster in execution procedure or function. can i see the time taken by procedure and select query i want to see only time not cpu cost or

  • Editing a banner with hotspots

    I have created a banner that has two frames and was divided into slices to identify the menu links.  I exported this to a folder and it turned out to be 1 HTML document, 1 GIF, and a whole bunch of JPGs.  How would I edit this banner once I have clos

  • N8 new issues

    Hello is it's normal when I'm charging and playing nfs shift via hdmi phone gives me electricity to my fingers from micro usb? And after ten minutes of playing my phone becomes very hot like 50 celsius? I'm afraid it can overheat. What I have to do i