Background user to run process chains

Hello
For process chains attributes there is an attribute which s execution user. Now for all the process chains the execution user will always be selected as background user by default.
My question here is where is this background user set. IS this a BI activity to be performed or something needs to be set by the basis.
Please can someone let me know?
Thanks

other way to reach there is
rsa1 - settings - global settings - bw user ale
however the backgrnd user can also be set at the individual chain level in rspc
regards

Similar Messages

To find the Person who run Process Chain lastly

Dear All,
How can I find the last person who has run the process chain? is there any table or program?
Best answer receives reward points.
Cheers,

Hello,
Last Modification
You can see that information in RSPC, enter in the chain that you want to see who was the last modification user, and there is a button that shows that information.
All Modifications
Or you can see the log in RSPC and see the modifications done to the a chain.
SUIM
SUIM is a powerful tool that comes in quite handy for the IT when working with roles and authorizations.
It will not deliver the last modification user of a process chain, for sure.
Regards,
Jorge Diogo

Problem with AND process in daily running process chain

Dear Friends,
I am currently I am facing problem with AND process. In my daily running process chain, daily the process chain is failing at AND process. Currently I am workaround and manually repairing the AND process and loading the data with below (link) steps.
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
I need permanent solution for this reoccurring problem. Kindly share your thoughts and ideas to resolve this problem.

Hi,
The below are the job log. After this the batch job is failing.
Job log overview for job: BI_PROCESS_AND
Job started
Step 001 started (program RSPROCESS, variant &0000000190315, user ID MAESTRO)
This AND process is not waiting for event RSPROCESS, parameter 475P4YTXTIIOA6IQ9GAZVEP24
Job cancelled after system exception ERROR_MESSAGE

How to stop the running process chain

How to stop the running process chains or infopackges...just qm status change is enought?

BI - SM 37 - Kill the Job
ECC - SM 50 - Kill the job

Is it possible to run process chain from the certain process/point?

Hello
Is it possible to run process chain from the certain process?
How?
Thanks

Hello,
yes it possible! use the following steps.
1. Goto the process which you want the chain to start from.Goto display messages>> Chain tab. In the generated instance note the variant and instance.
2. Goto table RSPROCESSLOG and give variant and instance and get logid details.
3. t codese37>> run FM RSPROCESSFINISH.
4. give the deatils u have got in RSPROCESSLOG table here and say execute.
This will solve ur problem.
Hope this helps!
Reg
Deepmala

Run process chain on last three days of the month

Hello
I need to run process chain on last three days of the month. For example , It should run on 28, 29 and 30th dates of June.
There is no option to put a code in the start process of the process chain.
I can run it every day and put a code in the infopackage/DTP so that empty load (0 records) will be done on other days.
This doesnt sound as a good option.
Do u know any other options?

Hi
See the code and details how to do it, and change the code as per your requirement.
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Triggering the Process Chains at Particular Date using Events
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/triggering%20%20the%20process%20chains%20at%20particular%20date%20using%20events.pdf
BI-ABAP (Trigger Process Chains on evry month 3rd and 4th day).
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=81428842
Thanks
Reddy

How to run process chain in day of 20 and 2 every month?

Dear all,
I have to run process chain in day of 20 and 2 every month,but the settting of PC just allow Scheduled start every month once
time.
Please tell me the way of setting process chain.
Thanks.

Hi,
(1) Create an event in the BW system
Define a system event (for example SAP_BW_TRIGGER) with Transaction SM62. Lets says it is "EVENTX". Use this even in the Process chain and execute the process chain as repeative job.
(2) Use the below lines of code in the program for calling a Fucntion which trigeres the event created above . Here in this program you will call the the Below FM if and only id the sy-datum is 20 th or 2nd of the month ( as mentioned by our friend suggested).
call function 'BP_EVENT_RAISE'
exporting
eventid = EVENTX
exceptions
bad_eventid = 1
eventid_does_not_exist = 2
eventid_missing = 3
raise_failed = 4
others = 5.
endfunction.
Regards,
Anil Kumar Sharma .P

Assign a server group as the background server for a process chain

Dear Experts,
Can I assign a server group as the background server for a process chain?
Even I assign a server group as the background server for a process chain by following T-cd: RSPC > W click a process chain > (Menu) Process Chain > Attributes > Background server and save & activate the process chain, no entry was saved in the column in RSPCCHAINATTR-SERVER with OBJVERS = "A".
Moreover, it seems that there is no process type for a process chain as a whole in T-cd: RSBATCH, so I assume that I may not be able to assign a server group to a process chain as a whole...
I know I can assign a server group as the background server for each process in a process chain.
Many thanks for your suggestions.
Best Regards,
Norifumi

On many UNIX systems there's a utility called detach which will launch the following command in such a manner that killing the shell will not kill the process. On systems that lack this command, I'd find an open source implementation and install it.

Error running process chain

Hi,
wehn we run process chain , the result from optimizer log showing error indicator , we check the abap run time using ST22 and discovered the message
DBIF_DSQL2_SQL_ERROR
what the message try to tell us , how to troubleshoot it .?
thanks

Hi AF,
try to look on SAP notes 978417 - Latch Monitor and Table Access Monitor: DBIF_DSQL2_SQL_ERROR. I guess this will solve your problem. It states also here on how you fix the issue.
Let me know if this make sense. Have a nice day!
Regards,
SASJr

Running Process chain in foreground VS background

Hi,
I faced an issue, which I did not understand. When I run the same process chain (delta upload), which contains process variants covering the process:
1. delta extraction from database table,
2. moving data via DTP into DSO
3. Activation of data in DSO
4. dropping indices from InfoCube
5. moving data via DTP into InfoCube
6. Recreating indices on InfoCube
When I run it in background it is executed successfully, but when I want to run it for the same dataset in foreground, then it stops at the second step, so even the first DTP transformation is not executed, but no error message comes. What can be its reason ?
Regards, Attila

Hi Attila,
When you try to run in foreground there is a maximum time limit attached to the foreground processess, you can check this value in RZ11 and give the parameter rdisp/max_wprun_time and check the value. If this value exceeds the foreground process gets cancelled.
Cheers,
Neelesh

Long running process chains - No Dump / error message.

Hello,
We have defined some steps in process chain that contains default macros. We mainly included that to ensure calculations happens even when users dont open or access the DP Planning book.
Issue is, these steps are running endless. normally it takes some 400 n odd seconds. But its running for the last 60000 secs.
No. of Planning objects or CVC is 2027 only. I had to cancel them and tried to re run this step or the whole chain no luck....
I have checked active jobs in SM37, there is none. So ideally there is no load on the system. Also no change to Macro or CVC's has been done. there was only one Transport that was moved and it was on the product master.
Also I have done the time series, Live cache, PA Consistency checks. only in Live Cache there was some Superflous time series and it was corrected.
I am not getting a clue of why its happening nor where to start the analsysis.
Any help or suggestion is greatly appreciated.
Currently I have made the subsequent events as independent,& the chain is running execpting this step.
Many Thanks
Aswath Ram.

Thanks for the reply,
These are custom macros. It adds two KF and copies to another.
The no. of periods is 24 time periods and roughly no. of CVC is 2100.
Another thing, this process chain has been running for last 5 to 6 months with no issues. Since sunday, its messing up....
I am doubting if its taking time read data from table or live cache. or is it because of some indexing. Not sure how to check that.
have asked Basis to check the system performance, if it might cause this issue.
Many Thanks
Aswath

Error when run Process Chain via BPC NW

Hi Gurus,
I am implementing SAP BPC 7.5 NW in a customer and I´m facing the following error when try to run a process chain via Data Manager: "Failed to analyze instruction ,TAB,%TAB% ".
Here is the scenario: we created a process chain that will be able to capture values recorded in a BPC application, load them into an DSO (make some transformations there) and finally send those transformed values to an specific table at ECC. This process will be started after some simulations at BPC and, when the user ends its simulation, start this process chain via BPC; this process chain is named as PC_ECC.
We made a copy of /CPMB/DEFAULT_FORMULAS and named it PC_FORMULA and, before step /CPMB/CLEAR, I assigned my process chain PC_ECC.
So, at Data Manager, I add this process chain (PC_FORMULA) and in Advanced button, I put this statement:
INFO(%EQU%,=)
INFO(%TAB%,;)
TASK(PC_FORMULA,TAB,%TAB%)
TASK(PC_FORMULA,EQU,%EQU%)
TASK(PC_FORMULA,SUSER,%USER%)
TASK(PC_FORMULA,SAPPSET,%APPSET%)
TASK(PC_FORMULA,SAPP,%APP%)
//TASK(PC_FORMULA,LOGICFILENAME,DEFAULT.LGF)
//TASK(PC_FORMULA,REPLACEPARAM,TESTE3%EQU%%TESTE3%%TAB%ASARENT%EQU%%ASARENT%%TAB%SOURCE%EQU%%SOURCE%%TAB%TARGET%EQU%%TARGET%)
As we do not have any script logic to be executed, we commented the two last statements.
When we run this package via DM, it gives us the message error: "Failed to analyze instruction ,TAB,%TAB% "
Looking through SDN forum we found two posts similar to this issues:
But the suggestion to supress the statement TASK(PC_FORMULA,TAB,%TAB%) do not work; when we comment this statement, the message error gives us the message:"Failed to analyze instruction ,EQU,%EQU% "; when we comment the statement TASK(PC_FORMULA,EQU,%EQU%) and the previous (with TAB). the DM gives us the message: TASK(PC_FORMULA,SUSER,%SUSER%) and so on, until nothing has left to comment.
Anyone of you view or has some similar case of error?
Thanks in advance to you all
Best Regards
Adriano

Hi Rich,
Thanks for your answer.
I checked the parameter at my process chain and it has a variant (/CPMB/DEFAULT_FORMULAS_LOGIC) with the parameters:
TAB
SUSER
SELECTION
SAPPSET
REPLACEPARAM
MEMBERSELECTION
LOGICFILENAME
EQU
So, when I put in the task PC_FORMULA, TAB, %TAB%, it will be able to be recognized by the task...and the other parameters too. And when I take one of them off the task instructions, the system complains.
Any other suggestion?
Once again, thanks..a.nd best regards
Adriano

Run Process Chain Manually

Hi Experts
I have about 10 ODS's for which data is being extracted from R/3. The user may or may not make changes to the data in R/3.
Client does not want to click on 10 different start button of infopackages.
Client doesnt want a full upload daily so i cant schedule the process chain at a particular time.
What I want is on a single click or something like that all the ODS should take data from their respective tables from R/3.
What options do i have to implement it?
Please help
Regards
Akshay Chonkar

Hi Akshay,
Your message can be considered in two ways.
1.) If you are running delta extractions into DSO's then, you can run the extraction job by embedding the Infopackages into Process Chains and scheduling them to run on a particular time daily.
2.) If you are running full updates, you can still include all the infopackages into Process Chains. As you said, client doesn't want to run the Process Chain daily, it means client would be knowing when the extraction job needs to be run. So, you can execute the Process Chain "Immediately" instead of periodic scheduling.
Hope this could have cleared your query to some extent.
Regards,
Ravi Kishore

Running Process Chains via abap

Hi all,
I have scenario in loading text file to cube via chains using abap, here the step:
Start from abap code to check the file, if exist run the Process chains
Process Chains
a. start
b. load data
c. updt from PSA
d. program "move file to err folder if loading error
e. Attrbute Change
f. program "move file to suc foled if loading successfull
g. program check file is still exist
it's looks like machine gun
The problem is always create two job "loading" (sm37) each file after abap code for checking file run the event 4 chains. This happened makes loading process takes time event the file only 20 records.
Why this happened? Please
Any suggestion is highly appreciated would be thankful for all
rgds
supriatna

you already raise the event after you checked the file successfully, right? And you already scheduled your process chain waiting for that event?!
-> yes, it's done and works
But what do you mean with 'each file have 2 jobs ...'
- > after a file founded and run the chains and I check the job using (sm37-job overview) there are create two job for BI_PROCESS_TRIGGER, BI_PROCESS_PSAPROCESS, BI_PROCESS_LOADING, BI_PROCESS_ATTRIBCHAN
is there time out ? no time out, stop by system
I have put 10 files but some times the process only run 2,3,5 file after that the job is stop.
here the message:
Process ABAP, job count 15425901 should already have started
System response
The chain has been terminated.
Procedure
There are probably not enough background proceses in your system.
Make sure that there are enough background processes, because parallel processes also run when process chains are processed.
The repeat frequency of the start-process may be too short. Look into this.
any suggestion on this problem ?
thanks in advance
supriatna

How to run process chains

hi,
this is sudhakar
pls any one tell me
I prepaired process chain
but i dont know how to start how it run daily automatically
pls any one give ans
thanks
sudhakar

hi,
open your process chain -> right click on start process -> select maintain varient -> select direct scheduling -> goto change selections tab -> select date/time give from when you want to run for eg from today 3.00 PM means in date tab give todays date and in time tab give the time info. in bottom select periodic jobs check box and click on periodic values tab -> here select daily check and save again check and save again save. now you schedule your job at 3.00PM from today, now you need to release this job, after this settings come to your process chain click on clock symbol to activate and schedule your process chain. so this chain will run at specified time, you can check this in SM37 by giving your user name and released job as job status.
Regards
Sankar

Background user to run process chains

Similar Messages

Maybe you are looking for