Backing Track Skipping, Help needed

I have just put a slideshow together on iDVD using photos form iPhoto. I'm really impressed with the Apples ability to handle Media content. I have experienced one issue with the backing music to the slideshow. Once I have burned the DVD the backing track has intermittent pauses throughout the entire track. Could anyone advise how to sort the problem out!
Cheers

Hi Matt:
It almost sounds like the DVD was burned at a high speed.
Can you try saving the project as a disk image? Then burn it in the Disk Utility.
Get DVD-R 4x or 8x (I prefer Verbatim) and tell the disk utility to burn at 1X.
:)Sue

Similar Messages

  • Vocals won't play, backing track will - HELP!

    My iPod mini plays perfectly well through the computer but when I try to listen thro earphones I can only hear the backing track and backing vocals (like a karaoke version!). This is not an earphone issue as I have tried different earphones. Can anyone help?

    good news indeed!
    keep an eye on it though. i'm no expert on the issue, but it can be caused by a dodgy jack connection. (i've seen a case of PC speakers being hit by it too.) so if it happens again, the repair option might be worth investigating.
    love, b

  • Back up recovery help needed please

    I had orig macbook that was backed up to time capsule. Got a new Mackbook Pro, because my screen went out on the orig macbook. Nothing wrong but the screen..... how do i get my files, itunes, photos etc from time capsule on my new computer.

    There are several methods.. read Q14-17 in the Pondini KB.
    http://pondini.org/TM/FAQ.html

  • Back bone design- help needed.

    There are total 6 sites connected together with fiber optic cable(They are all over the country distance may be between 500 to 1200 KM), i dont know the capacity of them,
    My job is to provide connectivity to all the sites with their specific requirements, their requirements are as follows,
    at each site they want 4 oc3(155 mbps), 4 E3s, (34Mbps), 8 E1 s,(2 Mbps)- 6 E1 s Voice.( all these are interfaces/capacity should be available at these switches.
    This is their requirement of them, now i have to provide them the suitable switches or routers, plz proivde me the suitable solution for this, i am not confident about providing an equipment with the said capacity, it can be cisco 7209, or cisco 6506 switch, or cisco mgx 8200
    i want specs of any cisco device which meets the requirement.(If any body can give me clue like which cisco box to choose from, i can carry along with it.)
    I iwll be implementing mpls on the core device.
    plz advice.

    Hello,
    My understanding is that Cisco are encouraging people to use the 8540MSR for ATM.
    http://www.cisco.com/application/pdf/en/us/guest/products/ps718/c1079/ccmigration_09186a00801932bf.pdf
    http://www.cisco.com/en/US/products/hw/switches/ps718/index.html
    http://www.cisco.com/univercd/cc/td/doc/product/atm/index.htm
    Originally Juniper only had layer 3 routers, but with their purchase of Unisphere it is possible they have an ATM switch.
    Regards
    Ian

  • I'm new to GB and I'm trying to record solo vocal with a backing track. I can get the track running OK but I can't seem to record. I think when I press record the backing track mutes and I need it running.. Thanks in advance!

    I'm new to GB and I'm trying to record solo vocal with a backing track. I can get the track running OK but I can't seem to record. I think when I press record the backing track mutes and I need it running.. Thanks in advance!

    guess what it says java file. So yes i'm sure. Sarcasm. Not the best way to encourage a total stranger to help you. Then there's
    Sorry if i wasn't more clear but was that response needed?No it wasn't needed, but I'm not the one asking for help so I have the luxury of not worrying too much about it. It's extremely frustrating trying to drag relevant information out of someone, and makes one less inclined to bother.
    Anyways, there's still nothing in this thread that actually explicitly says "there is a file called VolcanoApp.java in the directory where I'm running javac from" and I really can't be bothered banging my head against the wall any longer. You've made a silly mistake, or a false assumption. We all do it from time to time. My advice is, take a break, go for a walk and re-visit this in a while. You'll probably spot the mistake right away.

  • Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

    Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

    Thanks for prompt reply, yes we have tried that but have now closed down the browser we where the photos were.
    We haven't sent up time machine, do you know whether there is any roll-back function on a Mac?
    Thanks

  • I just bought a new iPhone and accidentally backed it up with my old iPhone backup, I do not want this. I lost everything on my new phone and I need it back. PLEASE HELP! This includes pictures and texts, etc.

    I just bought a new iPhone and accidentally backed it up with my old iPhone backup, I do not want this. I lost everything on my new phone and I need it back. PLEASE HELP! This includes pictures and texts, etc.

    So just to be clear, when you say "just bought" how long ago was that? Is it on this new iPhone that you had pictures, texts, etc that you want? Were you backing up to iCloud or onto iTunes?
    This may not help for everything but if you go to iCloud.com and log in, are you able to find your pictures there?

  • I am using windows 7 and itunes 11.7 my i phone 5s is not getting synced with my laptop it keeps showing backing up  please help i need to put music in my phone?

    i am using windows 7 and itunes 11.7 my i phone 5s is not getting synced with my laptop it keeps showing backing up  please help i need to put music ?

    Hi,
    Have you managed to solve this problem? if yes, please highlight how you solved it...i'm facing same problem with my new Iphone 5S but udner Windows, thanks.

  • I have QuickTime Player 7.6.8, I cannot update or remove it b/c I am missing QuickTime.msi file. It is gone and I need it back. Please help.

    I have QuickTime Player 7.6.8, I cannot update or remove it b/c I am missing QuickTime.msi file. It is gone and I need it back. Please help.

    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • Installed both 10.1.4 and 11.0.08 updates this week and now I can't use the Digital "Sign" document feature.  It's been completely removed.  Need it back. Please help..

    I installed both 10.1.4 and 11.0.08 updates this week and now I can't use the Digital "Sign" document feature.  It's been completely removed.  Need it back. Please help..  Can't sign or add text to any pdf document. Even when security properties allow it. 

    I would remove Reader and repair or reinstall Acrobat.
    Having different major versions can cause some users issues. Reader is not necessary if one has Acrobat installed. Even though Adobe has improved the capability of having both Reader and Acrobat with the same major version level there are still user configurations that have problems with this setup.

  • Left and right channel panning for drummer backing tracks in Garageband - HELP

    Hi there
    OK, so I've finished my song on garageband that I've recorded with a USB keyboard with many STEREO keyboard parts and a click track.
    I need to be able to mix down to the following specification for my drummer.
    Left Channel - Mono keyboard sounds (to goto PA)
    Right Channel - Same Mono keyboard sounds plus click track (to be heard through headphones)
    So basically the keyboard will be the same mono track at the same volume playing through both the left and right. I cant simply put the stereo keyboard sound in the centre as that would mean the drummer would get SOME parts of the keyboards stereo fields and the PA would get the other parts of the stereo field so it wouldnt sound right.
    Any ideas how to do this?
    I hope I've explained myself OK

    I need to be able to mix down to the following specification for my drummer.
    Left Channel - Mono keyboard sounds (to goto PA)
    Right Channel - Same Mono keyboard sounds plus click track (to be heard through headphones)
    Here are instructions on how to split a stereo track into mono tracks:
    http://www.bulletsandbones.com/GB/FAQPages/StereoToMono.html
    On top of this, you will want to re-import the mono keyboard track back into Garageband, duplicate it onto a 2nd mono track,  then add the click track (on a separate 3rd mono track of course).  Then pan one mono keyboard track hard left, and pan the other mono keyboard track hard right and the click track hard right as well.  Export as normal and everything should be good.

  • IMPORTANT OPENED WINDOWS I WAS WORKING ON (EMPLOYMENT INFO, I AM UNEMPLOYED!) AND NOW THEY ARE GONE AND I CANNOT GET THEM BACK!! YOU NEED TO HELP ME RESTORE TH

    My Firefox crashed with important information on it!!!
    My Firefox has been crashing every day sometimes several times a day. I have emailed your staff back many times looking for a reason for the crashed without any response. I have been able to get by because I would restore the settings and continue what I was doing. WELL….this last crash has disappeared from any way of getting it back and IT HAD SOME REALLY REALLY IMPORTANT OPENED WINDOWS I WAS WORKING ON (EMPLOYMENT INFO, I AM UNEMPLOYED!) AND NOW THEY ARE GONE AND I CANNOT GET THEM BACK!! YOU NEED TO HELP ME RESTORE THAT OPEN WINDOWS FOR ME. IT IS REALLY IMPORTANT!! I NEED SOME DESPERATE HELP NOW!!
    Thanks,
    Nick

    Nick, sorry to hear about that. I'm not sure where you are sending the emails, but if you use the form to submit your crash information, that goes into a database for review by the developers instead of coming to the support volunteers here.
    Did you try the History > Restore Previous Session command? Firefox sometimes saves form data in the session history. This data may age out, so you should use that menu item as soon as possible.
    Going forward, consider installing the [https://addons.mozilla.org/en-US/firefox/addon/lazarus-form-recovery/ Lazarus: Form Recovery] extension if you are filling long forms and Firefox is unstable.
    With respect to the crashes, there are many possible reasons for Firefox to crash. Have you reviewed the help articles for diagnosis? For example: [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]].

  • LG Enact:  My camera mode setting will not stay at SPORTS.  It keeps jumping back to NORMAL.  Need help.

    LG Enact:  My camera mode setting will not stay at SPORTS.  It keeps jumping back to NORMAL.  Need help.

        Geo0319,
    Let's get you snapping those sports moments. Does any other camera mode stay on consistently or do you have to change it everytime. It sounds like it will allow you to take one photo and then it reverts back to normal.
    RobinD_VZW
    Follow us on twitter @VZWSupport

  • Making click track for drums, help needed!

    Hello, newbie here.  I don't have that much experience with Logic and am using Logic 8.  Our band is making a backing track with midi bass panned one way and metronome click the other for our drummer.  My keyboardist managed to programme the metronome to change because we have lots of time signature changes mid song.  We've got all that working fine but our drummer is struggling to hear the click tone.  I could make an audio track with a cowbell sound but it would take ages and we've got the metronome doing what we want it to.  So...would ideally like the metronome click to be changed to a cowbell.  I've managed to change it from Klopfgeist to garage band drum kit but it only does a tinkly bell sound and then a whistle.  There doesn't seem to be an interface for it where I can change to a different drum percussion sound.  I've got Battery 3 and libraries.  I've tried loading this in the box below I/O but i then lose the metronome click altogether on playback.  Any ideas?  I've attached a couple of screenshots...
    Cheers

    you could also just not use the metronome at all. My default is an instrument track with hihats. If you load an intrument (like maybe ultra beat, or an EXS drumkit) then use the pencil tool to creat a region on a MIDI track, you could double-click the region and draw the notes on whatever beats, with whatever instruments. If you want to preview sounds, just hit your keyboard controller until you find what you like. The transport will show what note it is. Or the little keyboard on the left side in the editor. Edit the MIDI region to taste.
    Or... if you're not comfortable with the editing, just load an instrument, find the sounds you like, then record a couple of bars of how you want your click, then quantize to the smallest note value you have in your click. (usually 8th, sometimes 16th depending on the complexity of the click you've created.)

  • Hi help needed. Just updated my I phone 4 for first time since I bought it (I know, I know). Lost everything. What I really want back is my notes. Any ideas. Please. Somewhat desperate!!!!

    Help needed. Just updated my I phone 4 and lost all my notes, and no I didn't put them in the I cloud. Please help. Need those notes!

    You could always check to make sure itunes is updated to 10.7 but im sure gdgmacdude is
    right.
    thanks
    gdgmacdude
    Hey dude
    are there anymore hardware failure errors u know of
    im kinda a novice apple man and could use all the help i can get
    capp

Maybe you are looking for

  • I can no longer directly email pdfs from mac preview

    Since upgrading to Lion I can no longer open a pdf file in Mac Preview and then select "Mail Selected PDF Document."  When I do so I receive an error message: The "New Email With Attachement" service could not be used. Anyone know what the problem is

  • How to add accessibility to already built application

    Hi, Can any one help me how to add accessability to already built application. jdev version which am using is 11.1.1.4. Thanks in advance. Regards, lavanya.

  • How do I tell Win7 that the D (not system drive) is where my documents are?

    I re-partitoned my disk. I now have one disk of 160 GB (C drive) where the System installed and where I plan to load applications/programs and one disk of 250 GB (D drive) where I plan to store my data. But by default, the Users Directory is on the C

  • Video Magnifier and iMac 27"???

    I have video magnifier that uses a VGA port to connect it to a monitor. I just bought an iMac 27", can i use my iMac monitor (as a video input) with my video magnifier?

  • Checkbox checked for a particular rowid

    Hi, I'm using APEX 4.1 I have a page with checkboxes (Interactive Report Page) and a DML Form page for creating/editing lines. I check one record, and press a button that open that DML Form page. When I'm returning to the first page, I want that reco