Backing tracks

Can MainStage play backing tracks (songs) similar to a using a MIDI sequencer/MP3 type player in a live gig situation? To add to that, can it also serve as a live guitar rig simultaneously?

Ok I just read through the manual and there is no mention of a sequencer
Also to answer your other question... yes you can use it for guitar and midi keyboard at the same time. in fact I believe you can play keys, guitar, and sing into it all at the same time and eliminate the need for a outboard mixer.
Another thing... I saw no mention of it, so I was wondering if anyone knows if you can use IAC with this to send midi info from a sequencer to it for backing tracks?

Similar Messages

  • How do I get more than one song with a backing track in a concert?

    Hi,I confess I haven't yet looked in depth at the manual but I cant work out why there is only one song available at any one time within a concert.
    I am trying to put a set of songs together,some with backing tracks,some with just a piano and vox  and some with guitar and vox.
    Is there a quick answer to this?
    Cheers.

    Hi
    Not sure about how quick, but...
    Create Patches for each song with the necessary Playback Channels at Patch level (this will allow you to only use 1 MS patch within each "Song"
    or
    Create Playback channels at Set level for each song, with the Patches you need inside the Set.
    CCT

  • How do I use Garage Band to practice my guitar against lesson CDs and backing track CDs

    How do I use Garage Band to practice my guitar against lesson CDs and backing track CDs

    GarageBand on your Mac or on an iPad?
    If you are asking abot GB on a Mac you do the following:
    Create a new GarageBand project with a Guitar track
    Insert the CD and drag the audio file of the Lesson track or backing track to an empty region below the tracks in the timeline of the GarageBand window.
    Plug in a set of head phones and put them on to listen to your backing track.
    Plug in your guitar and select the guitar track.
    Click on the measure where you want to start your recording and select the guitar track.
    Press "record" and start to play.
    Regards
    Léonie

  • I use i-tunes for backing tracks with an acoustic band...how can I get a playlist to play one song at a time and not go to the next one until I manually select it?

    I use i-tunes for backing tracks. How can I set up a play list to play only one song at a time and not go to the next one until I manually select it?
    Thanks

    Uncheck all the songs in the playlist. iTunes will then play one song and stop.
    Regards.

  • As a musician using backing tracks how do I arrange a pause (until I can switch off or choose another track) between tracks?

    As a musician and having purchased backing tracks from iTunes, I want to arrange my backing tracks so there is a stop (not fade) at the end of each track. At the moment the next track starts before I am ready, or before I can choose what I want to play. Is there a way of doing this for purchased backing tracks, but all other tracks in my music library on my IPod Nano remain unaffected?

    I can't think of a way to do it using iTunes, and I'm pretty sure you can't configure the length of the gap between songs on the iPod itself. Quite frankly if it was me, I'd do it the way I suggested above.
    It's easy to make a silent mp3 file using something like Audacity, which is a free download.  Alternatively, a quick google search turned up this:
    http://www.xamuel.com/blank-mp3s/
    To create a playlist in iTunes (in case you don't know how to do it) see this:
    http://support.apple.com/kb/VI71

  • I'm new to GB and I'm trying to record solo vocal with a backing track. I can get the track running OK but I can't seem to record. I think when I press record the backing track mutes and I need it running.. Thanks in advance!

    I'm new to GB and I'm trying to record solo vocal with a backing track. I can get the track running OK but I can't seem to record. I think when I press record the backing track mutes and I need it running.. Thanks in advance!

    guess what it says java file. So yes i'm sure. Sarcasm. Not the best way to encourage a total stranger to help you. Then there's
    Sorry if i wasn't more clear but was that response needed?No it wasn't needed, but I'm not the one asking for help so I have the luxury of not worrying too much about it. It's extremely frustrating trying to drag relevant information out of someone, and makes one less inclined to bother.
    Anyways, there's still nothing in this thread that actually explicitly says "there is a file called VolcanoApp.java in the directory where I'm running javac from" and I really can't be bothered banging my head against the wall any longer. You've made a silly mistake, or a false assumption. We all do it from time to time. My advice is, take a break, go for a walk and re-visit this in a while. You'll probably spot the mistake right away.

  • Hi, I'm planning on using Mainstage 3 for performing live and I wanted to know how to add my Logic Pro backing tracks into it and have automated vocal effects that trigger while I'm singing.  How do I do this?

    I have a mic hooked up through an interface and I'd like to open up my backing tracks then figure out what vocal effect sound good on what places during the song, then I want to have those automatically trigger while I'm singing and performing.  Any help or suggestions would be much appreciated.  Thanks.

    Here’s a couple of links to get you started on your research...
    OS X Lion Overview
    iLife 11
    http://www.apple.com/ilife/video-showcase/
    http://www.apple.com/ilife/
    Running Windows on a Mac
    http://www.pcmag.com/article2/0,2817,2344661,00.asp
    And just in case you didn't know... This is a User to User Forum

  • Backing Tracks for Tenor Saxophone

    Dear friends from Apple Communities.
    I am looking for Backing Tracks of songs for Tenor Saxophone.
    Yesterday, I was watching some tenor saxophone soloist in the YouTube, and after a presentation from one saxophonist, at the end of the song, he had wrote that the Backing Track was purchased from "iTunes", but didn't gave more information about.
    I tried to find Backing Tracks in iTunes, but I didn't have success; nothing have appeared.
    Then, if someone knows anything about my search, please, let me know, once I need to have these backing tracks for play my tenor sax along with these songs. I will appreciate some comments about.
    Thanks a lot for your help.
    Best regards,
    Kyoto2014

    Hello ed2345,
    Thanks for the good tip.
    Indeed the site it's very nice about karaoke, but as the Tenor Saxophone plays with a particular key in the instrument (Bb), any song needs to be played with this same key. For example, the piano, guitar, etc. plays in the key C, the Alto Saxophone plays in the key Eb, and so on.
    Then, there are many beautiful songs in the site that you gave me, but unfortunately none specific to tenor sax.
    Maybe, using a good time from me, I could open some song that I have liked, and I should try to play along with this song, in order to see if the backing track would has the same key as my tenor sax.
    However, I  really have appreciated your concern and your time to write to me giving me a way to find some backing track for my sax.
    Again thanks so much for your help. The World forsooth, needs people like you and the friend "hhgttg27" that always giving a time for help others.
    Cheers,
    Kyoto

  • How do i load a set of backing tracks

    I'm brand new to Mainstage and I'm sure the question has been asked before but I want to put my band's backing tracks in a set. I've seen how it should look, but I haven't found exactly how to di it. I have WAV files ready to go. Just need the how to, to make the set and connect them to each track.

    Hi
    Crucial questions here:
    1) How many backing tracks for each "Song"... 1 (mix) or separate tracks for different instruments/stems?
    2) How do you want to organise the MS Cocert: A "Song as a Set, with Patches for different sounds, or simply a Patch for each 'Song"?
    3) How much info do you need to see in the Performance view, and how much control will you need? You may need to setup Screen Controls for the Playbacks.
    Basically, all you need to do is drag the audio files onto the Channel Strip area, and MS will make the Playback channels for you.
    You may want to take a look at the various Playback templates to get some ideas.
    CCT

  • Mixing a voice with backing tracks

    Anyone have any suggestions on how to bring a voice more the the "front" of a mix against some backing tracks? I have tried a few different EQs, mild compression, etc. It has gotten significantly better but its not quite there yet.

    Sometimes lowering mids or midrange instruments like guitars, keyboards, brass in the back trax will let the vx shine through. It sounds like your on the right track though if its getting better. Keep practicing.

  • How can I import a backing track from itunes to garageband? thanks!

    how can I import a backing track from itunes to garageband? Just trying to record over it. thanks!

    Reveal  iTunes in GarageBand in the Media Browser like this:
    Use the search field to find your song in iTunes, and drag the song from the m
    Media Browser to a real instrument track or an empty space on the Time Line.
    Or drag the song from the iTunes Application window to the desktop, and from the Desktop into the Time Line in GarageBand. Unfortunately you cannot drag directly from iTunes to Garageband.
    Regards
    Léonie

  • Vocal backing track stop playing when the cycle button is pressed.

    I am running the vocal backing track in Mainstage2.  I have various markers throughout the backing track, however, when I press the cycle button, the backing track stop playing and reverts to the start of the track.  Anyone know why this is happening?   

    Hello,
    Will try to explain how I understand the way a Question slide works:
    on the timeline you see a pausing point, this will be used twice
    when the user clicks on the Submit button, playhead is not released but the Success/Failure captions pop up, but you cannot control anything else such like stopping the audio
    when the user presses Y or clicks on the slide, the playhead is released, the Success/Failure actions are executed and (eventually - unless you changed navigation by those actions) the user is navigated to the next slide
    First thing you can change is the pausing point of the question slide, but once an audio clip started playing, this will continue and thus not solve your problem.
    It is only in that second step that you can do more customising by changing the Success/Failure actions, perhaps to an advanced action.
    Are you using this default behavior? And the audio is attached to what: to the slide or to the text captions for the questions and to the Success/Failure captions for the answers?
    I think the solution will be to skip the first step, by deleting the Success/Failure captions. When clicking on the Submit button in that situation, the Success/Failure actions will be executed immediately (and the playhead will be released). Attach the audio for the questions to an invisible object (rectangle without fill or stroke), that you hide with the advanced actions to be triggered by Success/Failure and show custom Text Captions for Success/Failure with audio attached to them. Because the playhead is now released, you will either have to time correctly so that the user will have to listen to the audio totally or to insert a static button widget that pauses the slide. But here I'm a bit stuck because I do not know which version of CP you are using, please?
    I blogged about using audio objects a while ago, but did not offer detailed explanations because no one asked for it until now. Have a look:
    Playtime with audio and widgets
    Lilybiri

  • Main Stage 2 Mixing Console plus backing track play list ?

    Is it possible to set up a play list of backing tracks in the 8 channel mixer template ? I need to run 4 sets of 10 songs all within the 8 channel mixer since the band all plug into my presonus and we use the Mainstage mixer as our main board. I need to be able to select between songs while keeping the same mix on the console.

    MainStage doesn't have "tracks", only channel strips and sets/patches. And the limit was 255 in MS1, now it is 1023. I think a few users actually reached the 255 limit in MS1

  • HT2375 Hi I can't play back track from the middle of a software track

    Hi I can't play back track from the middle of a software track, and hear what I have played.

    MarsDaretoDream wrote:
    Hi I can't play back track from the middle of a software track, and hear what I have played.
    For this you need to look at chase functions.  Project settings>Midi>Chase button

  • Can you back track your iMessages from the past on your apple ID account

    can i back track my iMessages on my phone 4s from the past from my apple ID account?

    If you mean recover old messages, the short answer is no.
    You would have to do a full restore of a backup that contained the messages you wish to view again.    Basically, if you deleted the messages, they are gone.

  • Can anyone tell me how to use the loops and backing tracks with a single guitar input? I can't seem to figure out how to set this up

    I am trying to configure Mainstage to input my own guitar and add a backing track from the library or a loop but, I can figure out how to open or add the tracks I've downloaded. Any help would be great

    did you try the PlayBack preset/template?
    once you open the PlayBack plug-in you just load the tracks from the plug-in's menu.

Maybe you are looking for