Backing up a blu-ray disc i made

support phone call was a complete waste of time.(offshore)
satellite P500 laptop comes with a blu-ray player.
i have a blu-ray burner that works with this computer.
Toshiba Disc creator ver 2.1.0.2 does not recognise the disc.
how do i backup the disc?
thanks all

I'd download a copy of Ashampoo Burning Studio.  It works with BluRay  and I used it for quite a while before I paid for it.  www.ashampoo.com  I've found it easy to use.
L875D-S7232 (Win 8.1)

Similar Messages

  • Does Premiere or Encore allow me to play back blue ray discs on Windows 7?

    Do I need additional software to play back a blue ray disc on Windows 7 when I have the Production Suite?

    Yes. PrPro is not a BD "player," but a video-editing program.
    There are several good ones available for the PC, and I recommend MediaPlayer Classic HC (free).
    Good luck,
    Hunt

  • Blu-ray menu button made with dynamic link won't work on Blu-ray disc

    Windows 7
    CS6 cloud
    Ok.  So I used dynmamic link to my encore project and I also imported an mpg.4 as an asset for a separate menu button.  I have two buttons on linked to the premire pro project and one linked to the mpg.4.  Everything works fine in preview and the flow chart is fine everything is going where its supposed to go. 
    When I play the blu-ray disc the menu shows, the video thumbnails show...but when I hit the menu button that is supposed to play the premier pro video it does not work.  But when I hit the menu button for the mpeg.4 video it does work.
    Can anyone tell me what is going on?

    Please post a screenshot of your flowchart.

  • How do I create Blu Ray Disc with DVD Studio Pro ?

    Folks, I think that I'm in trouble... I created 3 HD projects with DSP (i do not have the tapes and fcp project anymore, neither the HDV 1080i mov file) and I need to be burned it with a Blu-Ray Media, and play it with a BR Player... So far I made the following steps:
    1-) In FCP, I exported some Quicktime Movies with HDV 1080i60 codec (movie with chapters, menu bg movie, extras).
    2-) In Compressor, I used the preset HD MPEG-2 19,0 MBPS for videos, and Dolby digital professional 2.0 for audios.
    3-) In DSP I created a HD DVD Project (DISC window, GENERAL tab, DVD STANDARD = HD DVD; DISC WINDOW, DISC/VOLUME tab, DISC MEDIA = BLUE LASER, LAYER OPTION = OTP) with movies, extras, menus...
    4-) In ADVANCE BURN (under FILE MENU) I chose BUILD.
    5-) Now I got a HVDVD_TS folder, with my movie compilation...
    NOW, my doubt is... The folder HVDVD_TS can be burned on a BR Media and be played on a BR Player ?
    If not, what can I do with my HVDVD_TS folders to be compatible with Blu Ray ?
    thanks a lot for any help.
    Best Regards
    Marcelo

    That can't be done. Get the tapes back and start over. Get the new Toast in the tutorial I posted to make a Blu ray disc.
    You could try this tool to demux the streams, transcode to QT then re-encode for Blu Ray but I wouldn't go that direction unless you know what your doing. You would also be encoding twice which is not good.
    Get the original source back and go the toast route from the start.
    Message was edited by: Eric Pautsch1

  • Bad Quality blu ray disc, no matter what settings I use.

    I hope somebody has a solution for this issue:
    I exported a .m2t file from premiere using the mainconcept pro hd plugin. the video is a 1920 x 1080i 29.97 fps .m2t video at the highest mpeg quality settings on the plugin. The file its 29 gigs on size and looks great when played back directly, it is 1 hour and 45 minutes long. Then I imported the file to encore cs3 and made a nice set of menus and chapters, etc. Then I set the quality settings for transcoding to the best quality mpeg for 1920 x 1080 interlaced video, and check the project settings as well to the best quality. And here is when I notice a few strange things: 1.- The disc info bar, in the Build section, shows that the blu ray disc is using only 2.7 gigs of space, even when the .m2t file is 29 gigs and I`m using the best quality settings. 2.- the preview image in the monitor section looks choppy and very low quality. 3.- finally, after hours of transcoding and burning, the quality of the finished blu ray disc is very, very bad, and the total size of the files burned into the disc is about 7 gigs total. I tried many different quality settings in the program, but the results are the same or worst. I tried burning the original 29 gigs file using other program (cyberlink power producer) with no menus, and the results are far superior. (the things is I need the menus and chapters in this project, so I HAVE to do it in encore). Is there a way to get a decent quality blu ray using my video file in encore ? Any help will be greatly appreciated. Thanks.

    I had a couple of other thoughts.
    Are you using an Apple possibly with Leopard OS?
    If a PC which OS.
    How do you view the 29 GB file when you say it "looks great when played back directly"?
    Have you ever successfully burned a bluRay disk with your system?
    29 GB seems too big for that amount of footage (at least to me).
    You might check out this thread (particularly post #7 of 9)
    http://www.adobeforums.com/webx?128@@.59b5bb15
    which describes a workflow revolving around H.264. and the possible role of "forced interlacing" by Encore.
    I don't know if Jeff would agree, but there are a lot of problems with BluRay authoring. All you have to do is look up and down the list of posts. Personally, I think I bypassed all that by using Cineform.
    John

  • Problems creating Blu Ray Discs with AME Presets in CS4

    After several weeks wasted (months back) with an ATI 5750 graphics card in Win 7/and CS4 (not working correctly) - I finally resolved by swapping with a NVidia GTS250 card .....but all my troubles are not over yet ....
    I'm running Premiere CS4 and have finally just got down to testing creation of a Blu Ray test disc from some AVCHD 1920x1080 HD footage I am editing from my new camera.
    My work in CS4 is just testing at present as I used to use CS3 [still have on my dual core machine with Matrox RTX2]  - and have successfully created Blu Ray discs from HDV material in CS3 - but using Blu Ray MPEG 2 settings.
    New machine Win 7 - 64 bit
    Premiere CS4 is at 4-2-0 version
    Encore at 4-0-1 version
    These are the last updates
    I've selected a short test piece (about 2 mins)on Premiere timeline and initially tried Media export using Adobe Media encoder.
    I selected H264 BluRay codec in media encoder. Hi quality 1080 25 fps.(PAL)
    This creates dual MP4 Video and Audio streams
    Encode process goes OK, just slightly slower than real time, (I'm using i7-930 Quad Core and Win 7 64 Bit)
    Now - when I come to input the encoded video file into Encore as an Asset - Encore freezes and the whole machine locks up !!!
    Audio file imports OK but the Encore software does not like the encoded Video file
    I've re-installed Premiere and Encore twice in case of bad install. It wasn't that.
    I also found Adobe Media player couldn't play the file created by AME either - but it would play on a Premiere timeline?
    So is Adobe Media encoder messing up here ?
    So - .....3 hours of testing later ....I stumble on a Support thread from someone on the Forum that they found AME preset has "HIGH" in the Encoding Profile Preset - when it should be MAIN ?.
    Not sure what these settings do - but tried changing that parameter and re-encoded the Video file with H264 BluRay setting - all to no avail as when I try importing again the machne just locks up ?
    My final search in Premiere help file about creating BluRay discs ONLY talks about using MPEG 2 BluRay setting for creating BluRay discs
    It does not specify H264. Why is that?
    Can one of the moderators / experts confirm if H264 Blu ray format  is supported for BluRay disc creation in CS4 please??
    Better still please tell me the exact settings for Adobe Media encoder so it will import into Encore without having to be transcoded again.
    H264 should work - yes ?
    Final comment
    As an alternative method, I tried sending the short timeline in Premiere (using Dynamic Link)  to Encore to test that route for making a BluRay disc
    Bearing in mind the sequence is only about 2 mins long - when I ty to Transcode using the engine within Encore - the process takes a ridiculously long time and twice it has crashed just before the end of the process......
    Can someone explain why the encode process in Encore takes such a long time as I thought it used the Adobe Media encoder engine as well.?
    Adobe Media Encoder is much faster used stand alone mode.
    Encore seems to not use that ?
    Anyway - conclusion is that using Encore to encode the tmeline is a non starter as it takes too long.
    why so slow  on such a fast machine?....I know HD encoding is demanding but not that demanding with a decent machine.
    So the question is ....
    How do I encode in the most efficient and fastest way possible (using H264)  for Blu Ray authoring into Encore without need for more Transcodes?
    Any help or suggestions welcome as I'm now hitting my head against the wall :-)
    I have not gone through Adobe Support desk as it is usually a waste of time.{Dear VP of Adobe Customer Service - please do get this sorted out in the near future  if you want to retain loyal customers....}
    I cannot believe how disappointing  CS4 is turning out to be.
    After investing in a very fast PC machine etc the whole user experience is somewhat of a let down.
    Why so many issues for such a small test??

    Picking up on my original post about H264 - as I have a dual boot machine I also have a clean  installed Win 7 /64bit partition which I use for general bits of work.
    On that I have CyberPowerDVD SW installed which plays all Video files fine including BluRay material etc.
    Interestingly when I try to play the file that AME has created from the BluRay H264 preset it says 'It cannot play the file as it is a format it does not recognise...'
    This is really weird and would suggest AME is not encoding the file corrrectly??
    I have already removed and made a re-install of CS4 on my main [video editing] partition but there were some fragments of CS4 left intact
    How do I completely remove everything?
    I tried the CS4 clean script but it said it relied on Microsoft CLean Up utility and gave a link
    When I loooked on Microsoft web site the link to download it had been removed?
    Also Adobe say the CS4 remove script is no longer supported ?
    Can anyone advise on the correct tool/procedure to completely remove CS4 from a Win 7/64bit installation so I can then try re-install of CS4 one more time....in case the installation is corrupt in some way
    I can't explain why I am having this problem otherwise if other people find AME encodes OK with H264 BluRay preset.

  • Creating Blue-ray disc - H.264 Codec?

    Hi, I know I can use MPEG-2 for Blue-Ray. Is it possible to use H.264 Codec for Blue-Ray in Compressor? (it should be much more efficient then the MPEG)... How can I make it work?

    How long is your video?
    I have made Blu-Ray discs using Compressor and the latest Toast Titanium on standard DVD discs.
    In compressor just encode your video using the HD DVD codec supplied.
    Then, using toast select Blu-Ray disc (if you have a Blu-Ray burner) or select Blu-Ray on DVD (this will create a bluray disc on a standard DVDR although you will be limited to around 30mins)
    I have done this succesfully a few times and played back using PS3 with no problems.

  • Downsides to multiplexing audio for H.264 Blu-ray disc?

    I have a 9 minute video; personal/consumer use; 1280x720; 59.94; source video from a Contour+ helmet camera that stores .mov, H.264; audio is on a separate track from my own selection of mp3 files (it is a music video).   I have three intended playback targets: Blu-ray disc, Sony PS3 native, and PC/Windows Media Player.   Is there a big downside on video or audio quality in this case using multiplexing to produce a single .m2t file imported into Encore to produce the BD vs. separate .m4v/.wav files?   Not a huge deal, but having to maintain one production files vs. three is a minor plus if it makes little to no difference on the BD front.
    Depending on the answer, If I use the H.264 Blu-ray format/preset in PP to produce the .m2t file does Encore have to re-encode?   I am assuming Encore does not reencode if I am using separate .m4v/.wav files.
    Thanks

    You must always remember gents, when you multiplex, there is a BUFFER attached to that (computer term that means a chunk of size and bit defined fast memory space that holds an intermediate piece of data for shuttling to the next piece of hardware).  This changes the MAX Bitrate allowed for your video (but it doesn't show in AME cs6 and I don't think it shows in lower versions; not sure about cc).  Since you are tying one stream to another, and effectively weaving the data into one stream, you are maxing out the amount of data you can pass in that stream.  Only certain types of data can be read in this manner.  Think of it this way, you have taken two sets of data with different bit widths, and different bit-sample rates, and tied them together into one stream.  This stream still has to fit in the max data rates of the medium.  Your video cannot exceed 30mb\s and you are also left with another problem.  Audio, without mux, has so many different formats and bit fiddling profiles that it would be difficult to make sure it was within the sizing for data.  If, however, you limit it to one major codec, and use predefined bit\sample rates that can be sized up, you'll be able to tell if all the settings are "legal" or not, as you then have a predefined data-size for both audio and video.  If you don't multiplex, you get 2 streams.  It takes longer to load the disc, but both streams are cached.  Typically, with more motion, I like to non-plex, but with more emphasis on audio, I start leaning toward a TS file.  IF you want forward compatibility, select an intermediate codec, with little to no compression, save to a disc image, then burn a disc and file it away.  Every 10-15 years, hire an intern to turn their hair white recoding all your video and following the same procedure (unpaid internship time), but make them happy by hiring them as "Labor" on a short job or two and pay them well for standing around or stroking the egos of the "Talent".  What can I say, we all work more diligently and creatively when we feel more connected with it, whether we're brooding and trying to communicate the angst of a lost generation, or felling powerful enough to choreograph leaping tall buildings in a single bound.  Misery loves company, and powerful loves to be reminded it is by everybody whether it is or isn't.
    If you need better clarification...
    Lets go back to dvd for a moment.  DVD structure is Video TS and Audio TS.  TS is Transport Stream.  A stream is a BUFFERED movement of data that is transferred quickly in set sized chunks.  In DVD there were two transport streams to play back early on.  Later, many started muxing those streams and encrypting them, so that upon Decrypting they could be played.  Muxing made the encryption easier, as only one stream needed to be encrypted and it was all in the Video TS.  Audio TS folders are still written, but there is little data there.  In fact, removing this folder when no data is actually present has shown in some cases to do no damage, while in others, it will not play.  This is because, it is used as a shell to copy.  It initiates the audio stream playback on older players, and on newer players it isn't necessary.
    Blu-ray yields similar limitations.  You need to match the size of the buffer you are feeding.  Most players max out around 35mps from the old sets, and newer players actually pull more like 50mps.  If you don't know your target, you'll be out of luck.  I've seen blu-rays that don't play on older players being sold at video stores, at Frys, everywhere.  I've played them on an old one and found them to be unplayable.  Newer formats do not work with older players, but, they note it on the package that you need to meet certain specs, and those specs can usually be found on a sticker on your device so you can see if they match.  Remember your Target BitRate and Max Bitrate.  The Target should be less than the max for the device you aim for.  CS6 won't usually allow anything over 32.7mps, anyway, so setting this in AME even with dynamic linking could cause problems.  However, you do have the choice to locate a transcode... ...presents an interesting possibility.  I've been trying to get a project done or I'd try this myself:
    I'd use the x264 free codec, with some basic options and blu-ray-compatible flag, with --fake-interlaced, to create a transcode and link it into encore.  However, encore hasn't liked any of my transcodes that use multiple passes.  I'm going to try with a single pass later, and produce an intermediate output for now.

  • Problems Creating a Blu-ray Disc with a Main (Static) Menu and Pop-up Menus

    I'm having problems creating a simple Blu-ray disc containing a Main Menu (Static Menu with a graphic for my background) and a single Pop-up menu assigned to all of my timelines.  I wouldn't think this would be so hard to create but every attempt I've made ends up with the navigation getting all messed up to the point that my Playstation 3 doesn't even recognize that the disc as being Blu-rey disc.
    I want a simply static Main menu containing a "Play all" Button, and a button for each additional timelines.  Im also using the override commands on my buttons so if someone just chooses to see one specific clip from the main menu, they will be taken back to the main Menu after their selected clip plays.  But then I also want a Pop-up menu assigned to the timelines so the viewer can switch to a different clip (timeline) without having to go back to the Main (static) menu.
    My Blu-ray Disc runs just fine if I only use a static menu in a project, or if I only use a single Pop-up menu assigned to each timeline, but not both a Static Main menu, and pop-up menus.  I'm using CS4
    Thanks.

    it's just copying files to it, not video.  If you put a blank blu-ray disk in the drive, it may show up in the finder.  A program like Toast can burn a blu-ray.
    http://www.roxio.com/enu/products/toast/titanium/overview.html

  • Stop markers for Blu-ray discs in PRE 10

    This is a very old story: Stop markers work only in the preview mode, but not from a burned blu ray disc. Still in 10, shame on Adobe!
    Regards
    Andreas

    Andreas
    Thank you again for the follow up which is important to us all.
    Contrary to your report, I have found no evidence that stop markers in a Premiere Elements 10 AVCHD DVD are recognized  at its computer playback of the ACVHD DVD. As I have said, I do not have a TV Blu-ray player, PS3, or the like, and I have not looked into non computer playback for the Premiere Elements 10 AVCHD DVD. So, what is the key difference between your YES to stop markers working in your Premiere Elements 10 AVCHD DVD playback and my NO to stop markers working in my Premiere Elements 10 AVCHD DVD playback. The question sent me back to Premiere Elements 10 to explore the situation further based on points that you made in your last post.
    No stop markers in a Premiere Elements 10 AVCHD DVD were recognized during its computer play back with PowerDVD 9 (part of the software that came bundled with the Blu-ray burner). So, the version of computer player is one difference between us, you with PowerDVD 11 and me with PowerDVD9. I have found no settings in PowerDVD 9 that would impact the recognition of stop markers in the Premiere Elements 10 AVCHD DVD at its play back. And, PowerDVD 9 does recognize stop markers in Premiere Elements 10 DVD-VIDEO on DVD. Therefore, I am tentatively concluding that there is no difference affecting this situation when PowerDVD 9 vs PowerDVD 11. If you see a special PowerDVD 11 setting related to this matter, please let us know.
    More direct observations:
    DID NOT MAKE A DIFFERENCE
    a. NTSC vs PAL settings for project preset/Share/Disc/AVCHD/Preset
    b. DVD-R (4.7 min/120 min, 16X) vs DVD-RW (4.7 min/120 min, 4X)
    c. Blu-ray burner (Windows 7 64 bit) vs 2 different DVD burners (Windows XP 32 bit)
    d. Windows 7 64 bit vs Windows XP 32 bit
    e. Premiere Elements 10 (64 bit application, in Windows 7 64 bit) vs Premiere Elements 10 (32 bit application, when in other than Windows 7 64 bit)
    It would be very helpful for others to contribute their observations on this matter.
    ATR

  • TouchSmart IQ816 can no longer play Blu Ray discs

    For the last 5 months or so my TouchSmart has not been able to play my blu ray movies. I was told that this was a problem with an update of the MediaSmart DVD program. I had this same issue on my HDX18; I uninstalled MediaSmart DVD and reinstalled it to roll back the version. However, this did not work with my TouchSmart, and subsequent updates have not remedied this issue. It can still play DVDs and CDs just fine, but it no longer picks up blu ray discs. I have read various forums, and many people have had this same issue, some even resorting to a factory reset; I cannot afford to do that. I have heard that it is an underlying problem with the Cyberlink software that runs beneath the MediaSmart software, and even cases of HP support telling customers that they should BUY the updated Cyberlink software. When I purchase a computer , I am not expecting to pay extra for features that should have come built in. I have an Optiarc BD DRV BC-5600S.

    Rob,
    Not sure which OS you are running, but there is an updated version of the player software for Win7 that might make a difference...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80856-1&lc=en&dlc=en&cc=us&...=
    Otherwise, you could try uninstalling the application, and reinstalling it from application recovery.
    -dm (a long-time HP employee, but the comments/suggestions here are my own, not my employer's)
    -DM (HP Retiree)
    NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
    If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

  • Once and for all: Can DVD SP build Blu-Ray disc content or not?

    Maybe I’m crazy, but…
    Everything I’ve heard to date has Apple backing the Blu-Ray format. Believing this, I just spent $900 on a new Lacie D2 external Blu-Ray burner (which IS Mac compatible). I also purchased Toast 8 (which IS Blu-Ray compatible).
    All I need to do now is build my disc content (assign H.264 1920x1080 content, build menus, etc.) then drop it all into Toast and burn Blu-Ray video discs… right?
    So what is all this I’m reading here about DVD Studio Pro supporting the HD DVD format and not Blu-Ray???!!!!!!
    Am I going to be able to do this using DVD SP or not, and if not, can anybody tell me a program I can use to build my Blue-Ray disc content? (All of my HD content is H.264 (1920x1080) rendered directly from Adobe After Effects).
    My deadline for this project is fast approaching and I’m hoping somebody can shed some light on this. If I can build Blu-Ray discs and burn them on my Mac using Toast 8 and the Lacie D2, I’ll make my deadline and justify the $900 spent thus far.
    Can anybody help?
    Thanks, SM

    Wait a minute,
    Maybe I don’t need to buy PC to run DVDit Pro HD. I have a Mac Pro! With Boot camp I have a PC! Any reason I shouldn’t try running DVDit on my Mac via the Boot Camp beta? That way I'd also be using my Lacie D2 Bu-Ray drive. And with Roxio's 30 day return policy I haven’t much to loose...
    I'm calling Roxio tech support. Let you know how it goes
    Sark
    Message was edited by: sarkmachine
    A LITTLE LATER:
    Just got back from digging into Roxio's discussion forum and here's what I found:
    I have travelled down the same frustrating path my friend!
    But I did succeed doing it all on my new mac Pro, finally...
    Install BOOTCAMP (free beta). Install WINDOWS XP ($269 from AMAZON). Install ULEAD BD RECORDER, which comes with DVD MOVIEFACTORY 6 (free trial, $80 to buy).
    BDAV worked well from SONY V1-U burning to MATSHITA BD-MLT SW-5582 and played perfectly in new SAMSUNG 1200 palyer on my 57" DLP.
    TIP - install BOOTCAMP et al on its own HD, and use NTFS... This will come in handy when doing a BDAV from a file such as HDV1080 that is larger than 4GB.
    To do BDMV, you'll need SONIC DVD-IT PRO HD ($499) which I have yet to try...
    Frustrating process, but kinda cool to figure it all out, especially when NOBODY in sales at any of these places seems to have a clue.
    So there you go - must be possible
    Sark

  • If there ever was a NEW update for iMovie, will iMovie have the ability to burn projects onto a Blu-Ray disc so that customers don't have to pay for additional software like Final Cut Pro or Roxio Toast Titanium/Pro?

    It would be helpful for those who are familier with iMovie to use Blu-Ray discs for burning and playing back their iMovie projects in HD. However, iMovie '11 doesn't have that special feature yet. I hear that 'Final Cut Pro X,' 'Roxio Toast 11 Titanium' and 'Roxio Toast 11 Pro' can copy projects like iMovie onto Blu-Ray, but it would take long periods of time to do that. Professional software, like FCP X and Toast, can be pricey.
    I'm hoping that iMovie '11 will burn projects onto Blu-Ray, but will that ever come true?

    Will iBlu-Ray be an upgrade? OR and update of iDVD?
    If it's an upgrade, then that means you'd still pay for it from the Mac App Store. I wish it would only cost between $20-40.
    If it's a free update of iDVD, but with the new name, that would be better than to go out and pay for things!!!
    However, external Blu-ray recorders would still be required if you were going to burn an iMovie project onto a blu-ray disc.
    Is there a way to put in a request for 'iBlu-Ray?'

  • Is it possible to write 2 different project on one blu ray disc?

    I have about 23 Gb project of stills photos and still cameras video clips. But I also have some additional footage on hd from an hd  video camera.
    My blu ray disc are all 50 gb and I wonder if I could  add a second project to the disc and how to go about it, as well as if it is possible how I'll create menu/s to get it working.
    I posed the question in quite a few places but it does not return any relevant answer.
    I have not worked with blu ray before but since the writers are much cheaper it became affordable for me and I got an external usb Samsung writer.
    Window 7 recognises it but Encore (CS 4) does not -  anyway I found out it's probably better to use the "folder" option than the disc. I have created a rewritable BD using the image (iso) option with "imgburn". and although it stopped at 75% I was surprised that the BD plays with the complete project and no problem! (my rewritable is only 25Gb) so I can't experiment with with these particular projects.)     Thank you

    My try does not seem so lucky
    I added to my earlier succesful BR project 2 more time lines. On one I had video clips from several still cameras (2 panasonic and one Nikon) and on the other timeline, my .mts clips from my hd Everio video cam.
    The Encore projects was previewing well and did not return any error (pre building).
    I output the encoding to a folder and followed the imgburn well detailled instruction to burn to a folder,  i found them on the net and they were very well explained and my burning went exactly through the same steps explained.
    so the procedure progressed over a few hours (it showed the size of 25.5 GB) When it was complete the disk was ejected with a message that it could not be shut again and this happens with slim external drives or Laptops. 
    I'm not sure what is going on now, but when I put the disk in my entertainment player It asked me If I want copy or format the disk and it won't play.
    As this is the second time it happens I put it back in my BR writer, and like the first time It's going threw (I think), a "miscompares" check.
    Now it's through 40% and not showing any error, but i seem to remember that I clicked "Yes" to ignore "miscompare"
    So I don't really know what is going on, this is almost like 15 hours the process has been on (including the retry).
    The BD-RE (50gb DL) is the same colour as the new one I have not idea if anything is written on it.
    My first successful project was only animated stills with sound track added to it and burnt onto a rewritable 25 gb BR.
    Well any help will be welcome:)
    mm

  • Blu-Ray disc freezes for half a second between chapters

    I'm brand new to using Adobe for video editing.  I just finished my first Encore CS6 project, it's been quite a learning experience.  I have a 40 minute video with 18 chapters that I edited in Premiere Pro and exported for Blu-Ray as a single sequence.  Encore still insisted on transcoding it, it was irritating to have to wait but it worked. I created a simple blu-ray menu with a chapter index with 10 items per page created from a chapter playlist.  The first play is the first page of the menu, and each chapter plays sequentially.  There are no end actions on any of the chapters, they are intended to play sequentially starting from any chapter selected in the menu.  Encore said I have an oprhan timeline, but I don't see how, since it's my only time line and each chapter points to it.
    I built a Blu-Ray disc and it works great except for a half a second freeze in audio and video as it plays through each chapter point.  I built a DVD from the same project and it does not have this issue but its video is jerky during movement such as a scene where I'm panning the camera to follow an actor.
    The export settings from permiere were:
    1920x1080, 29.97 fps, upper
    VBR, 2 pass, Target 25.00 Mbps, Max 30.00 Mbps
    PCM, 48 kHz, Stereo
    I found several threads that seemed to be similar to these issues going all the way back to Encore CS4, but I haven't found any solutions.
    So to sumarize:
    I have four issues in order of importance:
    1. Blu-Ray freezing briefly as it plays through chapter points
    2. DVD has jerky video in higher motion scenes
    3. Transcoding what should already be Blu-Ray ready video
    4. Orphaned timeline that doesn't seem to affect anything
    Any suggestions?

    I wanted to test a possible issue with the freezes, but never got to it. Sorry you did not get any responses.
    The bluray should not freeze as you go through chapter points on a timeline. The fact that the timeline is an orphan is curious. You might post a screenshot of your flowchart.
    What version of Premeire are you using to create the exported files?

Maybe you are looking for