Backing up a drive across Airport Exrteme

I used to use Carbon Copy Cloner to back up to an external drive a bootable copy of my iMac, but now I just got a Drobo and hung it off the Airport Extreme. CCC can't see it. Anyway to copy a bootable copy of my local drive onto the Drobo through Airport Extreme?

Probably not. Can you connect the Drobo via USB even temporarily? I have an AEBS to which I connected a USB drive. Before I first connected it I used SuperDuper to clone my notebook's drive to the external. Now every day or two I use ChronoSync to back up my home directory to that external drive and once a month I disconnect it from the AEBS and update the clone. (This is in addition to using TM which, as new technology I don't quite trust yet.)

Similar Messages

How can I set up a back up hard drive on airport extreme

I have an external harddrive that was plugged into my airport extreme. Apple seemed to eliminate my abilty to back up wirelessly in one of the updates. How can I set this up again? Does anyone know a way around this?
Thanks,

Ah, I remember those links now. I was thinking something along the lines of:
Never consider any computer a data storage device, rather a data creation ,sending, and manipulation device. Anyone who thinks data is safe on any computer, even copied upon multiple partitions is making a mistake.
Never backup your data exclusively upon magnetic hard drives or flash storage, nor consider same since magnetic storage degrades over time even under ideal conditions.
Store important data on multiple servers on multiple continents.
Burn important data onto multiple copies of archival DVDs and store same in cool dark fireproof safes, multiple places.
Don’t burn data onto junk DVD’s purchased from consumer level electronics stores. These are not archival long life DVD’s nor reliable, nor trustworthy. Archival DVD blanks such as Taiyo Yuden, rated for 100+ years are what the pros use, these are made by JVC and are professional grade DVD blanks.
Most people have never heard of archival DVDs, however their cost is only 30% more than junk-level DVD blanks which are only rated for 5-10 years. Also the reject rate on the inferior DVD is around 15%, the cost is almost identical between the WORST DVD blanks and the BEST DVD blanks.
Most importantly know that 2 copies of your data is 1, and 1 is none, and 1000 copies stored in one place or building, is also the same as none due to possible fire.
Always consider and expect your computer’s hard drive to completely crash anytime, at all times, and you should keep a cloned and updated hard drive handy at all times to return to immediate productivity and utterly avoid programs and parameter reinstallation. Nothing is quicker than taking out a dead HD and tossing in a new updated cloned HD for getting back to 100% in under 20 mins!
Decentralized Omnipresent Data (D.O.D.)
(something I coined an age ago)
Backing up data to:
Multiple HD in multiple locations
On multiple servers on multiple continents, private and public websites, anonymous data farms. (very easy actually)
Burned onto archival optical and magnetic storage
Have unclassified data possessed by multiple people in multiples places.
When your data becomes both everywhere and nowhere, accessible to all, destructible by none, cannot be collected together or permanently retrieved under any circumstances, you have Decentralized Omnipresent Data (D.O.D.) protection rivaling that of large governments.

HT3235 Can i back up data of my computer in the shared drive via airport extreme

Can i back up data of my computer in the shared drive via airport extreme

If you delete it from the computer, it may eventually be deleted from the backup.
See "additional information" here: http://support.apple.com/kb/ht1427

Time Machine won't recognize back up after I move external drive to Airport

I have a new 640GB exteranl drive that I bought to back up my Mac using TIme Machine. I plugged in the drive via USB (USB powered drive), then set up Time Machine and did the first back up successfully. I then plugged my exteranl drive into Airport Extreme so I could back up wireless in the future. Airport recognies the drive, and I can see the back up folders on the drive. However, Time Machine doesn't recognize those back up folders as my Mac.
I went into Time Machine SEttings, and repointed it to the same disk, and it tries to back up everything again, wirelessly. Any ideas how to get Time Machine to recognize the back up files made while I was "hard wired" to the Mac?

Adam1076 wrote:
I have a new 640GB exteranl drive that I bought to back up my Mac using TIme Machine. I plugged in the drive via USB (USB powered drive), then set up Time Machine and did the first back up successfully. I then plugged my exteranl drive into Airport Extreme so I could back up wireless in the future. Airport recognies the drive, and I can see the back up folders on the drive. However, Time Machine doesn't recognize those back up folders as my Mac.
I went into Time Machine SEttings, and repointed it to the same disk, and it tries to back up everything again, wirelessly. Any ideas how to get Time Machine to recognize the back up files made while I was "hard wired" to the Mac?
that's not possible. remote backups are stored differently. directly attached backups are stored directly in a folder on the drive. remote ones are stored inside a sparse bundle. you'll have to start a new backup sequence if you want to do remote backups.

TM backing up from (not to) Airport Extreme drive

I have TM recognizing my HD connected to my new Airport Extreme & have successfully tested using the drive as a backup disc. However, I'm not going to be using the Airport disc as the TM disc. It is going to hold a shared media repository. What I want is to be able to back up portions of the Airport disc as part of the rest of my TM backup. I'm using an old sata drive in a usb enclosure for my TM backup.
For example: Backing up the remotely stored music collection along with files in my local home directory to the sata drive connected directly to my computer.
I know that I could use other backup software (or even DVD-R's if I want be toatly lame) for the remote backing up issue, but I'd like to stay as consistent (and use as much of the Mac coolness) as possible.
Thanks for any help!

Time Machine can not back up network drives. if you want to back up stuff stored on an airport disk you need a different backup solution. Try [CCCloner|http://www.bombich.com/software/ccc.html]. It can back up remote drives. Or you can change your backup scheme.

Time Machine won't back up external drive to Time Capsule

I recently got a Time Capsule, and successfully set it up to back up my iMac's primary drive, but for some reason Time Machine won't back up my external drive to the Time Capsule.
I removed the external drive from the exclusion list in System Preferences > Time Machine > Options, and from what I've read this should be sufficient to make Time Machine back up the drive.
The external drive is connected to my iMac via Thunderbolt > Thunderbolt-to-Firewire adaptor > Firewire 800 input, and the Time Capsule is connected via Ethernet to my LAN.
Since I'm using Ethernet, I've disabled Wi-Fi on the Time Capusule by going to AirPort Utility > My Time Capsule > Edit > Wireless > Network Mode > Off.
The reason I believe the external drive is not being backed up is because when I click the Time Machine icon in the upper-right status bar and choose "Enter Time Machine", none of the folders on external drive show any older versions.
Furthermore, when I click Finder > Time Machine Backups > Backups.backupdb, I can see only one sub-folder which has the name of my iMac's primary drive. I can't see any equivalent folder for my external drive.
Any idea what I'm doing wrong?

I don't see anything you have done wrong.. perhaps it does backup in a different way.
Load the widget.. A1 here... http://pondini.org/TM/Troubleshooting.html
That will allow you to track the log of TM to see what it is doing.
I would also try rebooting the computer.. exclude the drive again.. reboot.. and remove the exclusion.
You should be able to check the actual settings of TM in plist file.
And you can do a full reset of TM as well.. See A4. Check what is in the file. Pondini lists the location for you.
Nothing surprises me with Mountain Lion ...!!

Can I share an external hard drive across 2 machines both using Time Machine?

I have an iMac on Leopard and a MacBook on Snow Leopard and I want to use Time Machine to back up my iMac before migrating to Snow Leopard.
To do this I'm going to buy an external drive but before I buy it I want to check whether I can share this drive across my 2 machines both backing up using Time Machine.
Also from a drive capacity perspective is it sufficient that the external drive has the same capacity as the machine(s). If no then is there a multiplication factor that should be used.
Paul..

Hi Paul, you'll want to partition it into 2 Partitions, & ech {artition should be at least twice te size of the drive it's backing up, so 2*iMac's drive + 2*MacBook's drive for size.

Usb hard drive and AirPort Extreme

I have been using an external usb hard drive connected to my Airport Extreme to store music which is then picked up by a Sonos system to play music even when my iMac is switched off - has been working great. However I became aware recently (and I think this pre-dates upgrading my iMac to Mountain Lion) that my external hard drive no longer shows up as a shared drive within Finder. If I go into Airport Utility / Edit / Disks - 'enable file sharing' is checked. Disk Utility doesn't see the drive but I'm not sure that really means anything as a network drive rather than a drive connected directly to the iMac.
Has some recent upgrade disabled network drives on Airport Extreme's (ie assuming we are all now backing up to iCloud so don't need it)?
Thanks

OK, I feel silly on this one.
After looking for issues with the airport and not finding any and needing a file from my backup drive, I had to connect it up to my PC. That's when I found my solution.
The Drive I had connected had stopped responding. That's why the Airport was not showing it and not allowing connections. I had power cycled the drive a few times while testing, just not long enough. I unplugged the drive for 2 minutes, all cables, then reconnected. After about 5 minutes, the Airport was able to confirm the drive and turned the share back on.
Hope that helps.

Auto mounting hard drive across a small home network

Hi,
How do you setup a Power Mac 6500 running Mac OS 9.1 to automatically mount it's hard drive at startup onto a PowerMac G4 running Mac OSX 10.2.8? I have a small network at home that I'd like to cross-mount hard drives across.
I can mount the volume just fine manually from either machine. I just don't know the GUI or command on 9.1 to do the mounting automatically at startup.
Any ideas, or suggestions would be greatly appreciated!
Ed

Here's the (partial) answer I was looking for.
To go from a remote machine --> 6500, do the following:
1) Open "Chooser".
2) Select "Apple Share".
3) Type in the DNS name of the computer you want to mount onto the 6500 in the box labeled "Server IP Address". If TCP/IP isn't active, then type in the numerical IP address.
4) When prompted, type in the password for your keychain, and then the account name and password on the remote machine that you want to automount.
5) Then select the drive (share), or shares, you wish to mount.
6) To automount at startup, check the box "Allow at Startup".
To get the share on the remote machine to automount at Startup, your keychain must be readable by the AppleShare application at Startup (ie. the "Allow access without warning" box on the keychain should be checked).
To go in the other direction, ie. 6500 --> Remote machine:
To automount the 6500's hard drive onto a G4, one needs to do that configuration on the G4, via NetInfo or launchd, depending upon the version of Mac OSX. These get into UNIX networking commands, which is probably outside the main scope of this forum. I'm working on getting the UNIX boxes configured now. If anyone would like to know the commands, just post back here.
I found out how to use the "Chooser" on Mac OS9.x platforms from p. 68 of the Apple manual "Mac OSX Server: File Services Administration for 10.4 or later".
The Apple Technical Note 1111 on programmatic mounting of shares under AppleShare is also useful.
Ed

Cannot see hard drives on airport extreme

Recently I cannot see hard drives on the network that are connected through Airport Extreme . The airport Extreme can see the drives, but the network cannot. I have not changed any settings that I know of. Only a reset of my macbook pro running Mavericks allows me to gives me access to the drives. Airport utility 6.3.2

+I will check when I get home. How do I do that?+
Connect the drive directly to a USB port on your Mac.
Then open Macintosh HD > Applications > Utilities > Disk Utility
Click on the drive in left hand panel and look for information at the bottom of the window about the disk
Your drive may be formatted as Windows NFTS. If that's the case, you will need to reformat the drive to work at the USB port of the AirPort Extreme. Be sure to copy any data that you need to another drive (maybe twice to be sure) before you do this as the reformat will erase all data on the drive.
When you are ready, click the Erase tab and then select MS-DOS (FAT) as the format so both PCs and Macs will be able to read the files.
Then copy a small test file back over to the FAT drive and plug the drive into the USB port on the AirPort Extreme. Restart everything on your network starting with the modem first, then device attached to the modem, etc.
On you Mac, open Macintosh HD and check to see if your AirPort Extreme icon appears under the SHARED heading on the left side of the window. If so, click the icon and folder will appear to the right representing your drive. Double click this folder to reveal the contents and mount the drive on your desktop. You should see your test file. Make sure it is operable..music plays, video works, etc.
Sorry, I haven't used Windows in 3-4 years and cannot remember how to access drives, but I would start with My Computer and start poking around. You want to verify that your PC can access and play the files as well.
If everything is OK,you can copy all your backup files back onto the USB drive attached to the AirPort Extreme. Keep the extra backup copy handy for awhile, just in case as well.

ITunes Settings for Media on External Drive via Airport Extreme...

iTunes Settings for Media on External Drive via Airport Extreme base station versus plugging directly into laptop.
My current configuration is that my iTunes Media (700gb) are all stored in an External Drive that's plugged into my Airport Extreme Base Station. This works great for me having wireless access to my iTunes external drive.
Whenever I need to back up that hard drive with Time Machine, I just plug it directly to my laptop...
But how do I let iTunes (or iTunes library) know that this is the same hard drive where all my media is stored when it's plugged directly into the laptop as opposed to trying to access it from my Airport Extreme network?

No there isnt any files call library in the folder i created I am now in the process of copying them back but I guess I will loose all my playlists and playcounts. I do have a Copy of my drive that i made with carbon copy cloner. So maybe it will be best to boot from there, restore and start again.
Chris it was just the media folder. I was following the instructions on the apple support page. Got to point 14 didn't get the warning but did seen to have a brand new itunes, so emptied the trash as they said expecting everything to be fine but it wasnt.

How do I access my encrypted User Account files from my Back Up hard drive? Time Machine was used to create the back up disk; File Vault was used to encrypt the files.

How do I access my encrypted User Account files from my Back Up hard drive? Time Machine was used to create the back up disk; File Vault was used to encrypt the files.

Thanks. I will try going through TM. Since my Simpletech is on the way out, I'll be plugging in a new external hard drive (other than the back-up drive) and trying to restore the library to the new drive. Any advice or warning if this is NOT the right thing to do?
Meanwhile, that is a great tip to do an alternate back-up using a different means. It's been tough to figure out how to "preserve access" to digital images and files for posterity, knowing the hardware will always fail/obsolesce sooner or later, and that "clouds" are only as good as their consistent and reliable accessibility. Upping the odds with redundancy will help dull the edge of my "access anxiety", though logically, it can never relieve it. Will look into
Carbon Copy Cloner.

Recovering erased data from a back-up hard drive

Hello,
I erased a folder full of data on my back-up hard drive (Western Digital), and need to recover if it possible. I deleted it and then emptied my Trash, but have not written over it yet. How can I recover this folder? Thanks.

Try using an application such as Data Rescue or FileSalvage.
(29668)

Using an external hard drive with Airport Extreme

I'd like to use an external hard drive to store movies and music through my Airport Extreme. The drive is connected to a powered usb hub which is connected to the Extreme. I can see the drive in Airport Utility but I can't figure out how to use it.

Hi,
I have just tried to set up an Airport Extreme with an external hard drive at home. I have 4 computers connected to the "network" - an iMac, a MacBookPro and 2 x windows machines. A printer is connected wirelessly to the two Macs.
I cannot find the hard drive - I have tried the steps mentioned by Bob Timmons Mar 17 2010, but the only things I see under "Shared" in Finder are the iMac and the printer - not the Airport Extreme (seems odd??), not the windows machines, and most importantly, not the hard drive connected to the USB port on the Airport Extreme.
I therefore expect that the iMac and printer are connected wirelessly and directly, rather than through my network (& I'm happy for the printer to be connected this way, but I do need the PCs and the hard drive all networked).
According to my network connection, (in top bar on the screen) I am definitely connected to the network - yet nothing else shows in finder??
I do, however, see the USB hard Drive when I go into Finder>Applications>Utilities>AirportUtility.app, under my Airport Extreme >Disks. I've also gone through all the set up procedures for "File Sharing."
I have read other posts about formatting the hard drive ether FAT32 or NFTS - is this something I now need to do?? If so, which one should I use, and once I do it, will I then see it?
Presumably, in order to format the Hard Drive, I will need to disconnect it from the Airport Extreme, and connect it directly to one of the Macs too?
My apologies for so many questions, but this is all very technical stuff for the non-techie layperson.
Many thanks for any help anyone can provide on one or more of the questions / issues.
Martin

Isync and backing up hard drives?

I'm looking for the best way to regularly back up my hard drives incase of a catastrophic failure and if my house is burning down and “I can only grab one thing” type situation. Right now I’m looking at a terabyte fw 800 drive. Can isync back up my data or do I need a specific program and if so what?
thanks

Many backup programs let you select a source and destination drive and then select which files/folders you want to backup. But I'm only aware of one that can let you create a backup set that will include more than one drive as the source. ChronoSync, lets you designate a single source/destination backup like most programs but then it has a container that makes it possible to group several backup sets into one. This would let you back up multiple drives to a single destination. Other programs may have the same feature but ChronoSync is the only one I know of.

Backing up a drive across Airport Exrteme

Similar Messages

Maybe you are looking for