Backing up a time capsules to a remote device across internet?

Hi
has anyone any experience of backing up the time capsule (backup and NAS) over the Internet to a remote device (either a machine, NAS or another time capsule)?
I'm trying to do a home (cheap) version of colocating the time capsule (primary location my place, secondary location/back up location my parents).
Just wondering if there is any advice since most discussions seem to centre around the archive feature via the USB port which does not help since I need to remember to take it off site!
Any suggestions would be great
Thanks

The only thing I've done with a Time Capsule over the Internet is to copy individual files.  It takes a long time.  I'd expect an attempt to copy a lot more would take an unacceptably long time.

Similar Messages

  • Accessing Computers Connected to a Time Capsule From a Remote Location

    I am already able to access my Time Capsule from a Remote Location and have read/write access to the internal hard drive within the Time Capsule and the USB hard drive connected to it.
    My problem is that I cannot access any shared computers or networked hard drives attached to the Time Capsule.
    Suggestions are greatly appreciated.

    If you don't want to use Back to my Mac, you can just use screen sharing. Go into Airport Utility and go the Advanced tab along the top. Then click on port mapping. Set up a new port map to route to the iMac. When I did this, I just used the "Apple Remote Desktop" option from the drop-down menu, this pre-fills everything in for you except for the IP address of the iMac. Just pop the IP address in the field, save the new port map, and Update the TC. Now you should be able to screen share from anywhere with your MacBook Pro using the screen sharing app. The Screen Sharing app is located in /System/Library/CoreServices/ScreenSharing just drag it to the dock to keep it there. When you open it up it will ask you for a host address, just type in the IP address of your time capsule followed by the 5900 port number, for example x.x.x.x:5900 where x.x.x.x is the TC IP address.
    Just make sure your iMac is set up for File Sharing, Screen Sharing, and Remote Login, and you should be good to go. Just a word of caution, when the port map is set up, anyone can use it, so set up a good password on your iMac. Also, under the screen sharing pane, click on "Computer Settings" and check both boxes and enter a password in the box. You should not need this because when you try to connect with your MBP, it should give you an option for logging in as an authorized user, in which case just use login info for a user on the iMac.
    Just one last thing, if you close the Screen Sharing app and open terminal and enter:
    defaults write com.apple.ScreenSharing ShowBonjourBrowser_Debug 1
    then hit enter and reopen Screen Sharing, it should give you a list with all your bonjour computers and saved computers, so when you out in your IP address to connect to the iMac, make sure the box for "Add to my Computers" is checked, and it will add the IP address to the list so you don't have to put it in all the time.
    Hope this helps,
    Nathan

  • How can I access my Airport Time Capsule from a remote location?

    I have my 2 TB Airport Time Capsule connected to my home wireless network and I have heard it is possible to access my information stored on it from anywhere, but I have no clue how to do this.

    Frankly, this is not easy, and not for the faint of heart.  Having someone to help who has done this will save you a ton of time and headaches.
    Set up and use Back to My Mac - Apple Support
    Before you do anything though, Back to My Mac assumes that you have a simple modem......not a modem/router that is often provided by Internet Service Providers to their customers.  A modem/router.....also called a gateway.....will not allow Back to My Mac to work correctly, so if you do have a modem/router or gateway device, you will need to speak to your service provider to find out if they can provide you with a simple modem.
    A simple modem will look something like this:
    A modem/router or gateway will look something like this:
    Having said this, personally I use another method called Port Mapping to allow my Mac...or an iPhone or iPad connect back to the Time Capsule at home when I am traveling.  But, this is even more complicated than Back to My Mac, so BTMM would be the place to start for most users.
    If things look intimidating on first pass and you can locate a good tech to set things up for you, that would be money well spent.

  • Time machine has stopped backing up to time capsule. message is that sparse bundle is in use

    Time machine suddenly stopped backing up to time capsule returning this message:
    The backup disk image “/Volumes/Data-1/xxnymacbooknamexx MacBook.sparsebundle” is already in use.

    Complex procedure that will almost always solve this bug:
    Pull the power cord from the back of the Time Capsule
    Count to ten
    Plug the power cord back into the back of the Time Capsule
    Wait a few minutes, then try a backup again.

  • When back up to time capsule I get the message no access to backupcopyfiledisc/Volume/data/imac.sparsebundle ( error - 1 )

    When back up to time capsule I get the message no access to backupcopyfiledisc/Volume/Data/Terjesumac.sparsebundle ( error-1)

    Try #C17 in Time Machine - Troubleshooting for known fixes. Works for me as well.
    http://pondini.org/TM/Troubleshooting.html

  • Time Machine stalls when trying to back up to Time Capsule or an external hard drive.

    TIme Machine stalls when trying to back up to Time Capsule or an external hard drive.  Time Machine shows a message such as "Backing up 4MB of 9.00GB" but nothing happens for hours.

    Are you really running 10.6.4 OS?
    What model TC and what firmware?
    Wireless or wired?
    How is the TC setup?
    If TM can work to neither a TC or external hard disk it is more likely the computer is faulty hard disk..
    Do a verify of the disk.
    See A5 here.
    http://pondini.org/TM/Troubleshooting.html

  • Get an error message when trying to do back up to time capsule: This record is already in use please try again, get an error message when trying to do back up to time capsule: This record is already in use please try again

    Cannot do back up with time capsule.
    I get an error message sayng that this disc is already in use. I have tried to wipe and restart but to no avail.
    What could be wrong?

    Pull the power cord from the back of the Time Capsule
    Count to ten
    Plug the power cord back into the back of the Time Capsule
    Wait a few minutes, then try a backup again

  • My 'old' files have been backed up onto time capsule (Leopard), I have upgraded to Lion (thro snow leopard) and now checking back to retosre some old files i can't see or access beyond the date I upgraded to Lion? Help please?

    My 'old' files have been backed up onto time capsule (Leopard), I have upgraded to Lion (thro snow leopard) and now checking back to retosre some old files i can't see or access beyond the date I upgraded to Lion? Help please?

    Use the manual methods.. but it is possible for TM to wipe the old files in trying to fit into the space.
    Try Q16.. but read all the section 14-17
    http://pondini.org/TM/FAQ.html

  • I have two Macs that won't back up to time capsule, says The backup disk image "/Volumes/Data/Douglas Chalmers's iMac.sparsebundle" is already in use.

    I have two Macs that won't back up to time capsule, says The backup disk image “/Volumes/Data/Douglas Chalmers’s iMac.sparsebundle” is already in use.

    Please look over to the right of this page for the heading of More Like This.
    There are multiple answers and solutions there.

  • How can I back up my time capsule contents to a different hard drive?

    I want to back up my time capsule to a different hard drive so I have that extra layer of safety

    There are a few ways to do this but none good.
    Airport utility will do an archive of the disk.. just open to the disk tab and click archive. The target is USB drive connected to the machine. But it can only do full backup.. no incremental.
    You can backup over network but not using Time Machine.. Carbon Copy Cloner is a $40 software that is well worth it. Super slow though doing this.
    I recommend you backup using CCC direct from the computer to the target.. otherwise you can be backing up the same problem.

  • 3?'s: Message today warning lack of memory when using Word (files in Documents) something about "idisc not working" 2. Message week ago "Files not being backed up to Time Capsule"; 3. When using Mac Mail I'm prompted for password but none work TKS - J

    3 ?'s:
    1  Message today warning lack of memory when using Word (files in Documents) something about "idisc not working"
    2. Message week ago "Files not being backed up to Time Capsule";                                                                                                                                             
    3. When using Mac Mail I'm prompted for password but none work
    Thanks - J

    Thanks Allan for your quick response to my amateur questions.
    Allan:     I'm running version Mac OS X Version 10.6.8     PS Processor is 2.4 GHz Intel core 15 
    Memory  4 gb  1067   MHz  DDr3  TN And @ 1983-2011 Apple Inc.
    I just "Updated Software" as prompted.
    Thanks for helping me!    - John Garrett
    PS.
    Hardware Overview:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro6,2
      Processor Name:          Intel Core i5
      Processor Speed:          2.4 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache (per core):          256 KB
      L3 Cache:          3 MB
      Memory:          4 GB
      Processor Interconnect Speed:          4.8 GT/s
      Boot ROM Version:          MBP61.0057.B0C
      SMC Version (system):          1.58f17
      Serial Number (system):          W8*****AGU
      Hardware UUID:          *****
      Sudden Motion Sensor:
      State:          Enabled
    <Edited By Host>

  • Can't back up to Time Capsule

    Trying to backup my computer but getting this message "The backup disk image “/Volumes/Lisa Liberman's Time Capsul/Stuart Liberman’s MacBook Pro.sparsebundle” is already in use."  It is not currently backing up my other computers.  How do I fix it?

    Pull the power cord from the back of the Time Capsule
    Wait a full minute
    Plug the power cord back in to the back of the Time Capsule
    This simple reset will solve the problem about 95% of the time. Expect it to occur again, so you will know what to do next time.
    If the simple "fix" does not work, there is more information about this issue here:
    http://pondini.org/TM/C12.html

  • Wirelessly backing up without Time Capsule?

    I read that it's possible to wirelessly back up without Time Capsule as long as the external drive is connected to another Mac. Can anyone  help please?

    1. You can do what you are now doing. You could transfer files via your home network using File Sharing.
    2. Partitioning is done using Disk Utility. See:
    To resize the drive do the following:
    1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
    2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
    3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.  (Note: You can only make a partition smaller in order to create new free space.)
    4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
    You should now have a new volume on the drive.
    It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss.  Your drive must have sufficient contiguous free space for this process to work.
    4. This can be done as you are now doing it. You can share the backup drive from the desktop computer if you have a home network. Select the drive. Press COMMAND-I to open the Get Info window. Check the box labeled "Shared." Now open Sharing preferences and check the box, "File Sharing." If the shared drive is not in the list then use the Add [+] button and add the drive to the list. On the other computer you should see your desktop now listed in the Finder's sidebar under Servers. Click on the desktop name then click on the Connect As link in the upper right. Log in as a registered user using your admin account on the desktop and enter your admin password on the desktop account. You should now see an array of folders you can access including the shared drive. Double-click on it and it will mount on the Desktop. You can now use it like any other drive. For more help with this process select Mac Help from the Finder's Help menu and search for "sharing."
    Now, you can use a lot of different software for doing backups, syncs, etc. Here are a few:
    Backup Software Recommendations
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    Silver Keeper
    Super Flexible File Synchronizer
    Synchronize Pro! X
    Synk Pro
    Synk Standard
    Tri-Backup
    Others may be found at VersionTracker or MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.
    All of the above can use a networked drive as a source or destination for backing up or syncing files.

  • HT1177 iPhoto back up on time capsule

    Hi there, new time capsule user- need help. Is there any way of checking whether my photos from iphoto have been backed up in Time Capsule?

    See #15 and the pink box in Pondini's excellent support document Time Machine - FAQ
    http://pondini.org/TM/FAQ.html

  • HT1449 I moved my itunes library to the time capsule. Everytime I put the computer to sleep, I have to change the location back to the time capsule. I cannot get the iTunes library to stay located in the time capsule.

    My itunes library does not stay in its new location in the time capsule. Every time I put the computer to sleep or leave it alone for awhile, the itunes location goes back to the original location in the macbook. Then I have to change the location back to the time capsule and wait for it to reorganize all the files again. So the question is how to keep my itunes in its new location the time capsule?

    Welcome to the discussion area!
    +Can someone please provide a definite answer, or at least warn against using the TC as a shared media device on a network. The whole point of getting such a device is to be able to offload large multimedia libraries from the laptops, yet access a shared library when networked. N'est ce pas?+
    We're all users here...not pros...so you'll get few definitive answers on a forum with varying opinions about almost every subject.
    My opinion would be this: Apple designed the Time Capsule for Time Machine to automatically backup all the files on your Mac and other Macs in the household on a regular basis and provide a way to retrieve a file that had been deleted recently by mistake. It's a pretty good router as well.
    If you check the info about the Time Capsule on Apple's site, the main features mentioned are backup of your Macs and a dual band wireless network capability.
    The Time Capsule was never designed to be a media server housing audio, video and other multi-media files and has never been promoted as such. Nevertheless, some users seem to have adopted the stance that this should be one of the benefits of the device, if not a main feature.
    There may be a need for media server type device, but the Time Capsule, at least at this time, is not the answer. If you feel otherwise, you might want to speak directly to Apple and let them know via Time Capsule Feedback.

Maybe you are looking for