Backing up and restoring on a different computer

My boyfriend's laptop just died, and he needs to sync his iphone to get updates etc.
I offered my MBP, but even if we did a backup/restore, would he lose all of his music, contacts, pictures whatnot?
thanks

If you sync pics/movies/etc with your computer, then he will lose the pics/movies/etc.
If you restore, he will certainly lose all the info.
I would suggest that he wait until he get his computer repaired/replaced, then he can use his backup copy to restore the music/pics etc to his computer. This way he will be able to re-sync his music/pics etc to the iphone when he syncs it to his new/repaired computer.

Similar Messages

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

Backing up and restoring site definitions

Losing your site definitions in Dreamweaver can be a disaster, but it does happen sometimes. The best way to prepare for such an eventuality is to back up your site definitions on a regular basis.
Creating a backup
You can back up all your site definitions in a single operation by selecting Site > Manage Sites. In the dialog box that opens, Shift-click to select all site names, and then click Export.
In Dreamweaver CS6, the Manage Sites dialog box looks like this:
In earlier versions of Dreamweaver, it looks like this:
Dreamweaver asks if you want to include passwords and login details (this is the default option). Whichever option you choose will be applied to all sites, so click Cancel if you want to treat some sites separately, and export your sites in two sets by using Ctrl/Cmd-click to select them.
When you click OK, Dreamweaver asks where you want to export the definitions. Navigate to a suitable location, leave the File name field unchanged, and click Save. Although only one site name is listed in the File name field, Dreamweaver exports all the site definitions as .ste files in a single operation.
NOTE: This process backs up only the details of your sites, such as the location of the root folder, FTP details, and so on. It does not back up the actual files in your site, such as .html (or .php, .asp, .cfm) files, images, and style sheets. It's a good idea to use your normal file backup routine on your actual files from time to time, as well as exporting the site definitions.
Restoring site definitions
In the event of losing your site definitions in Dreamweaver or moving to a new computer, open the Manage Sites dialog box, and use the Import button to navigate to your backup .ste files.
What if I don't have a backup?
Often, if you don't have a backup of .ste files, you need to go through the whole process of re-entering the details for each site manually.
However, you might be able to restore them by using a restore point on Windows or Time Machine in Mac OS X.
On Windows, the site definitions for Dreamweaver CS6 are stored in the Windows Registry at HKEY_CURRENT_USER\Software\Adobe\Common\12.0\Sites.
In Mac OS X, they are at Macintosh HD:<username>:Library:Application Support:Adobe:Common:12.0:Sites:Site Prefs.
In recent versions of Mac OS X, the Library folder is hidden. In the Mac Finder, select Go > Go to Folder, type ~/Library in the search field, and click Go.
Dreamweaver CS5.5 site definitions are in the same location, except use 11.5 instead of 12.0. The numbers for CS4 and CS3 are 10 and 9 (without a decimal fraction) respectively. For earlier versions of Dreamweaver, substitute Macromedia for Adobe, and adjust the number accordingly.
If you don't have a backup of the actual files on your site, download the files from your remote server.

Hello,
We are running iPlanet 5.2 Messaging Server and need
to migrate to another (duplicate) 5.2 Messaging
Server. We have all the software installed and the
LDAP user accounts created. Now we just need to move
the existing mail from one server to the other.
I found the Backing Up and Restoring the Message
Store section in the Admin Guide says to back up and
restore your data, Messaging Server provides the
imsbackup and imsrestore utilities.
However I am wondering about the Queue?
Under <instance>/imta/queue
What is the difference between the Message Store
and the Queue? The Message Store is where messages get delivered to, so you can read them.'
The queue is where messages are temporarily stored, pending delivery to wherever they go.
You can use tar, cpio, or what have you for the queue. Stop the server first. . .
You then just restore the files to the new server. No need to restart or anything like that. Just dump the files in, and run
imsimta cache -sync
to tell the MTA to re-read the queue.
Can I just backup and restore the
Queue using tar or cpio?
Thanks in advance for any advice.
Regards,
Tim

Hello, i have a first generation ipod and i lost the pin, i followed the instruction to back up and restore factory settings but in the middle of the process an unknown error occurred

hello, i have a first generation ipod and i lost the pin, i followed the instruction to back up and restore factory settings but in the middle of the process an unknown error occurred. how can i get my ipod working again with my backup files. please help

What was the complete wording of the error message? Usually an error number is also given.
Maybe:
ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- Also, confirm your security software and settings are allowing communication between your device and update servers.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Back up and Restore iTunes

Hi all. I am having problems with my windows PC, i am going to have to wipe the hard drive and reinstall windows.
What is the best way to back up and restore iTunes?
I want to keep all my playlists, music data, such as number of times player etc and which songs are ticked.
I also have a iphone and a ipad, is there anyway to transfer their data and backups?
I don't want the trouble of re-syncing the iphone and ipad apps/music etc.
My library is about 40gb. In the past I have simply copied and pasted the itunes folder (on a portable harddrive), but it never remembers the data listed above and I have always had to re-sync all of my music and apps to iphone and ipad, which are full up with 32gb and would take a considerable amount of time.
Is there any way to do this so my iPhone and iPad think itunes is exactly the same and won't require (wiping and) re-syncing/re-authorising and will carry on as normal.
I would be greatful for any help. Thank you.

Copying and later restoring the entire iTunes folder should have you covered. I suspect you did something wrong with the restore phase on your previous attempts.
All your media should be inside your iTunes\iTunes Media folder. If that is not the case then you should consolidate the library. File > Library > Organize Library > Consolidate files. If the option is available you should also use File > Library > Organize Library > Rearrange files in the folder "iTunes Media". If your media folder isn't a subfolder of the main iTunes library folder then see this post.
Backup the library with UserTip. Before you wipe the hard drive deauthorize the computer and make one final update of the backup.
Once you have rebuilt your computer install SyncToy and use the same process to clone the backup copy of your library back into the Music folder of your new profile as ...<User's Music>\iTunes. Then install iTunes and authorize the install of the operating system to your account. Your devices can now be connected and backed up on the new system. They will sync without losing any data.
Keep using SyncToy periodically to keep your backup up to date.
tt2

Back up and Restore When switching PC's

I've just completed a Back up and Restore, and it finished missing over 400 songs. Can you give me some suggestion on how to fix this. I am switching from an older PC to a newer PC.

You can not back up a phone that is disabled.
You will have to put it into recovery mode to restore it if you don't have access to the computer it normally syncs with.

Back up and restore data

How do i back up and restore all my stuff on my iphone 4, 8 GB without wifi or a computer
Ive got icloud, itunes, and dropbox someone help me

You cannot backup or restore without WiFi or without access to a computer.

How do I find out my password to back up and restore my new iphone 6? Its not the same as my iTunes password..

How do I find out my password to back up and restore my new iphone 6? Its not the same as my iTunes password..

I am guessing you are talking about an encryption password that you placed on the backup you put into iTunes on your computer.
If so, you elected to encrypt your iPhone's backup. You will need to recall that password, or you cannot access the backup.

How To: Best way to Back Up and Restore many DBs ?

Hi Forum,
I have 200 databases (SharePoint databases) that are running on one single instance e.g. (Server1\Instance1), and the names of the databases are e.g.: (DB1, DB2, DB3....DB200).
I want to migrate all these 200 databases to another instance e.g. (Server2\Instance2).
Of course, I can use the SSMS to Back Up and Restore the databases, But, For 200 databases, This is quite impractical.
Therefore, I have two questions:
1) Which option is the safest way to Back Up 200 databases which their sizes combined together could be around 80 GB? Using T-SQL or Maintenance Plan? Obviously, I want a process that doesn't hang or fail.
2) I found the script below on: (http://www.mssqltips.com/sqlservertip/1070/simple-script-to-backup-all-sql-server-databases/) - Is it excellent script? Any better script?, Also, Could you please tell me how to keep the exact name of the databases
without any changes at all (Without appending date nor time)?
DECLARE @name VARCHAR(50) -- database name
DECLARE @path VARCHAR(256) -- path for backup files
DECLARE @fileName VARCHAR(256) -- filename for backup
DECLARE @fileDate VARCHAR(20) -- used for file name
-- Back Up Directory
SET @path = 'E:\Backup\'
-- Filename format
SELECT @fileDate = CONVERT(VARCHAR(20),GETDATE(),112)
DECLARE db_cursor CURSOR FOR
SELECT name
FROM master.dbo.sysdatabases
WHERE name NOT IN ('master','model','msdb','tempdb') -- exclude these databases
OPEN db_cursor
FETCH NEXT FROM db_cursor INTO @name
WHILE @@FETCH_STATUS = 0
BEGIN
SET @fileName = @path + @name + '_' + @fileDate + '.BAK'
BACKUP DATABASE @name TO DISK = @fileName
FETCH NEXT FROM db_cursor INTO @name
END
CLOSE db_cursor
DEALLOCATE db_cursor
3) Any script for restoring all these databases from the Backup directory to the new SQL Server instance (Server2\Instance2) ?

You would have to develop the script for a single database move, test it thoroughly, then write the dynamic SQL WHILE loop.
At any rate, this appears like a good task for an experienced DBA
and not for a Data Architect.
Here is another example for a dynamic SQL WHILE loop:
http://www.sqlusa.com/bestpractices2008/rebuild-all-indexes/
PowerShell is another alternative:
Copy user databases to a different server with PowerShell
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Satellite P750/P755 - Back Up And Restore Windows 7

Hi,
My harddrive is about to fail on my Windows 7 Satellite P750; I have been getting warnings of an impending failure for a month now. I have purchased a new harddrive and it is ready to go, however I am unable to create a backup and restore point. I am getting an error 0x81000037: "Shadow files cannot be read".
Let me give you some of the history of my machine before getting to the issue. Windows 7 came preinstalled on this machine. About a year ago I created a new partition and installed Linux. Linux then took over the boot responsibilities. A couple of weeks ago I deleted the Linux partition. This gave me a problem as the computer was unable to boot. Fortunately I had recently created a back up and restore point, and during the process I was asked if I wanted to create a Windows 7 Home Premium Repair Disc. I was able to use this CD to access a command line tool which made the machine bootable again.
However, I no longer have a hidden boot partition on my machine (at least according to the Disk Management snap-in I don't). I am now getting the above error when I attempt to create a new backup and restore point. I no longer have a copy of the previous back up and restore point (I deleted it to make room for a new one).
From my research, apparently one of the possible causes of the error 0x81000037 is related to the hidden boot partition size. Since i do not have the hidden boot partition I fear that this could be the cause.
There are other possible reasons for this error. For example a virus which anti-virus refuses to allow access to during the back up and restore partition, and junction points in the drives to be backed up which are mounted volumes. I have run a full scan on my computer and cannot find any threats. I have checked my junction points (of which there are a few) and none are mounted drives.
This leads me to suspect that the lack of a boot partition is the problem. I have seen some people in forums suggest that it is best to back up all my data in the traditional manner (already done, since you ask), install the new harddrive and then install Windows 7 again.
So finally, we get to my question!
As Windows 7 came installed on my machine, I believe that I do not have the disks to reinstall it on a new harddrive. Is this correct? Am I able to obtain a copy?
To be honest I wouldn't mind reinstalling Windows on a new harddrive, rather than using a back up and restore point. I have a LOT of programs and rubbish which have accumulated in this one over the last (almost) 3 years.
Thanks for your patience. If there are some specifics which would be helpful, but which I have left out (I am sure there are) please let me know.

>As Windows 7 came installed on my machine, I believe that I do not have the disks to reinstall it on a new harddrive. Is this correct? Am I able to obtain a copy?
You did not get any disks because Toshiba provides own recovery disk creator software which is always preinstalled on the new notebooks.
This recovery disk or media creator tool creates Recovery disk which can be used to recover the notebook.
It was a big mistake not to create such disk however, you have a possibility to order such disk here:
http://backupmedia.toshiba.eu/landing.aspx

Backing up and restoring X2 iphones - having conflict issues

Hi,
My wife and I have been using the 3gs for 2 years and have now upgraded ;-) I pluged mine into itunes and backed it up, then pluged in my new one and restored and it all works fine.
However when I tried to backup my wifes phone and then restored - it just restored as mine again, so we had 2 new phones with all my details on it!!
So I restored to factory setting on the iphone 4s
I have tried uninstalling Itunes and reinstalling but it still has my phones info on it.
Please can you tell me how to back up and restore my wire iphone and for it not to keep using my phones details ??
Thanks Chris.

As long as you are NOT running a production application on Oracle's Hosted site.. You can't really run a scheduler job, since it would usually export stuff to your local server, but you don't have access to that on Oracle's site.. Unless you just want to build a form to output data from your tables, that would push the data down to your workstation, there is no other rel means.. Other hosting companies will allow you to use Sql Developer and such, but then again you are paying to use their site..
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead.

Backing Up and Restoring the Message Store v.s. the queue

Hello,
We are running iPlanet 5.2 Messaging Server and need to migrate to another (duplicate) 5.2 Messaging Server. We have all the software installed and the LDAP user accounts created. Now we just need to move the existing mail from one server to the other.
I found the Backing Up and Restoring the Message Store section in the Admin Guide says to back up and restore your data, Messaging Server provides the imsbackup and imsrestore utilities.
However I am wondering about the Queue?
Under <instance>/imta/queue
What is the difference between the Message Store
and the Queue? Can I just backup and restore the Queue using tar or cpio?
Thanks in advance for any advice.
Regards,
Tim

Hello,
We are running iPlanet 5.2 Messaging Server and need
to migrate to another (duplicate) 5.2 Messaging
Server. We have all the software installed and the
LDAP user accounts created. Now we just need to move
the existing mail from one server to the other.
I found the Backing Up and Restoring the Message
Store section in the Admin Guide says to back up and
restore your data, Messaging Server provides the
imsbackup and imsrestore utilities.
However I am wondering about the Queue?
Under <instance>/imta/queue
What is the difference between the Message Store
and the Queue? The Message Store is where messages get delivered to, so you can read them.'
The queue is where messages are temporarily stored, pending delivery to wherever they go.
You can use tar, cpio, or what have you for the queue. Stop the server first. . .
You then just restore the files to the new server. No need to restart or anything like that. Just dump the files in, and run
imsimta cache -sync
to tell the MTA to re-read the queue.
Can I just backup and restore the
Queue using tar or cpio?
Thanks in advance for any advice.
Regards,
Tim

I generally back up and restore my iphone every week... and this time i backed it up..and i can see that backup time and file size.. now.. when i try to restore my iphone.. i select the back up and now it is taking forever to restore. help me

i generally back up and restore my phone every week.. just that i dont have any problem with the network issues. !!
today at 00:46 1st june.. i backed up my iphone and it was perfect...
when i try to restore it.. it is taking 15+ hours .. and that time stays like that for almost 3 hours... it does not happen.
i even called the apple help center. and they said me to install as a new device... and when i said what wil happen to my messages.. they say .. they wont stay.. and wil be deleted.. and all my apps i need to download again..
but earlier i din need to do any of it.!!! it worked really fine .!!!
please help me..!!! i got some important details in this back up.... please help me.!!!

Once in a while the restore process seems to mess up. What I don't understand is why you would perform a weekly restore.
At any rate, if you must restore, perform a device reset (settings>general>reset) and then you will have the opportunity to restore from iCloud. Restore a device whenever it no longer works correctly, not just as a matter of maintenance. If it ain't broke, don't fix it.

HT201269 Transferred from iPhone 3GS to 4. Backed up and restored, perfect. New phone is connected to our wireless but is still giving me the "no service" in the upper left corner. Help????

Transferred from iPhone 3GS to 4. Backed up and restored smoothly. Still getting a "no service" message in the upper left corner of new phone. Help?.....

Sounds like your iPhone was hacked to unlock and now updating locks back to the original carrier.
Where did you get the iPhone?

I have forgotten my iPad password and tried to back up and restore my iPad but it says you need to unlock your device before you restore it but that is the whole reason I am trying to restore my iPad. Can anyone help?

I have forgotten my iPad password and tried to back up and restore my iPad but it says you need to unlock your device before you restore it but that is the whole reason I am trying to restore my iPad. Can anyone help?

Forgotten passcode or device disabled after entering incorrect passcode

Backing up and restoring on a different computer

Similar Messages

Maybe you are looking for