Backing up in Time Machine - Cannot connect and Hangs

Hi
I have a QNAP NAS that has a Time Machine Backup function which I have been using successful up til 10.7.1.  I recently went away for vacation and needed to dismantle all my network connections as somebody wil come into the apartment to fix the airconditioning.
When I came back, I successfully reattached my network without a hitch, except for Time Machine on the QNAP NAS.  This was after I upgraded to 10.7.2.  MY backup disk had less than 7 gb left and Time Machine said it was not enough since my last update was 2 weeks ago.
So what I did was to just erase the backup files in the NAS and start from scratch.  Unfortunately, now I cannot seem to connect to the backup disk even if I can see it in the shared area in the left hand bar of the FInder window.  When I click on it, it seemed to me that was unable to connect to the backup disc as the message says Connected failed. 
Question is: is this an Apple problem or a QNAP [problem?  I have looked in different forums including this one and no one seems to be able to to give me an answer.  I do have a hard time understanding some arcane Mac commands since I am not a Mac techie.
Antonio

Same too me. Since 10.7.2 i am not able to backup on the QNAP firmware 3.5.1.
I read something about changes in AFP, so may be a future firmware fix this problem.
For now i switch to an external HDD.

Similar Messages

  • Time Machine cannot back up to G-Drive slim which is connected, but does not appear in Finder.

    my MacBook Air (13-inch, Mid 2013) using OS X  Yosemite10.10.2 has properly connected G-drive Slim, but it does not appear in Finder;
    On Screen pop up Warnings:
    "Back up Failed  Time Machine couldn't back up to "G-Drive Slim" " and
    "Disk Not Ejected Properly  Eject "G-Drive Slim" before turning it off."

    Does the drive show in Disk Utility? Try a restart.

  • I have bought a new computer and backed up off time machine backup now I cannot open photoshop get error code 150 30 help appreciated.

    I have bought a new computer and backed up off time machine backup now I cannot open photoshop get error code 150 30 help appreciated.?

    Have you updated your iTunes on your computer? WIth a device running iOS7, you need iTunes 11.
    When you removed iTUnes, did you see something named 'apple mobile device support' or something like it? (The exact name varies from operating system to operating system). If you see that, uninstall it too. That's the drivers for your iPhone and they should self-install when you plug your device in.
    If all that is fine, have you checked your cable and USB port? a malfunctioning cable can keep you from syncing.

  • HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    If you look at the User Tips tab, you will find a write up on just this subject:
    https://discussions.apple.com/docs/DOC-4053
    The subject of buying/selling a Mac is quite complicated.  Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
    SELLING A MAC A
    Internet Recovery, and Transferability of OS & iLife Apps
    Selling an Old Mac:
    • When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
    • Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
    Internet Recovery:
    • In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
    • Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
    iLife Apps:
    • When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
    • Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
    • It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
    SELLING A MAC B
    Follow these instructions step by step to prepare a Mac for sale:
    Step One - Back up your data:
    A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
    B. Clone to an external drive using using Carbon Copy Cloner.
    1. Open Carbon Copy Cloner.
    2. Select the Source volume from the Select a source drop down menu on the left side.
    3. Select the Destination volume from the Select a destination drop down menu on the right
    side.
    4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
    sure to opt for that.
    Destination means a freshly erased external backup drive. Source means the internal
    startup drive. 
    Step Two - Prepare the machine for the new buyer:
    1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
    2, Remove any Open Firmware passwords or Firmware passwords.
    3. Turn the brightness full up and volume nearly so.
    4. Turn off File Vault, if enabled.
    5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
    Step Three - Install a fresh OS:
    A. Snow Leopard and earlier versions of OS X
    1. Insert the original OS X install CD/DVD that came with your computer.
    2. Restart the computer while holding down the C key to boot from the CD/DVD.
    3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
    Optionally, click on the Security button and set the Zero Data option to one-pass.
    4. Install OS X.
    5. Upon completion DO NOT restart the computer.
    6. Shutdown the computer.
    B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because
    it is three times faster than wireless.
    1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
    Utilities window appears.
    2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button. 
    3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
    on the Erase tab in the DU main window.
    4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
    and set the Zero Data option to one-pass.
    5. Click on the Erase button and wait until the process has completed.
    6. Quit DU and return to the Mac OS X Utilities window.
    7. Select Reinstall Lion/Mountain Lion and click on the Install button.
    8. Upon completion shutdown the computer.
    *If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

  • I downloaded Lion on my iMac.  It apparently cleaned out the hard drive.  Nothing shows up from before.  It looks like a brand new computer.  It is backed up on Time machine.  Any idea of why this happened and suggestions on restoring?  Thanks.

    I downloaded Lion on my 4 yr old iMac.  The download stalled at the last minute so I clicked "CANCEL".  When it was restarted, Lion was there, with no apparent option but to go ahead and install so I assumed it was okay.  Didn't transfer data from "another computer" when prompted - assumed it would transfer from that computer.  It apparently cleaned out the hard drive.  It looks like a brand new computer.  None of my apps, programs,  files, or thousands of photos.   It is backed up on Time machine, but it's a sickening sight.  Any idea why this happened and suggestions before restoring?  Thanks.

    I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
    You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots.  Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
    See Pondini's page for more explanation:   What are Local Snapshots?   http://pondini.org/TM/FAQ.html
    I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
    You have tested the library on the external drive, and so your photos are save there.  
    The local TimeMachine snapshot probably now contains a backup of the moved library.  Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

  • HT201250 I don't store any files on my computer, I store them on a hd. Can I restore docs from my hard drive if they were backed up using time machine? And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.

    I don't store any files on my computer, I store them on a hd. Can I restore docs from my hard drive if they were backed up using time machine? And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.

    ehphotograph wrote:
    Can I restore docs from my hard drive if they were backed up using time machine?
    Yes.  
    And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.
    Also yes.
    Directly-connected external drives (ie, USB, FireWire, Thunderbolt) are not backed-up by default.  You must remove them from the exclusion list in Time Machine Preferences > Options to get them backed-up.  (Network drives cannot be backed-up.)
    And they must be formatted for a Mac -- any variation of Mac OS Extended.
    If the drive is connected, you can browse or restore normally -- just go to the folder or document in question and Enter Time Machine.
    If the drive is not connected, it's a bit different.  See #E3 of Time Machine - Troubleshooting.
    Message was edited by: Pondini

  • The first time I connected my new My Passport portable hard drive to my Mac, the message asking if I want to use the drive to back up with Time Machine did not appear.  What is the next step?

    The first time I connected my new My Passport portable hard drive to my MacBook Pro, the message asking if I want to use the drive to back up with Time Machine did not appear.  I would like to set it up to do this.  What would my next step be?

    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Open Time Machine preferences to select this drive for use as the backup drive. Turn on Time Machine.

  • Can I restore a iPhone back up from time machine and if so how?

    I have upgraded my iphone to IOS 7 this morning. However as I was backing up my phone, the cable I was using was removed from the macbook.
    I now have a iPhone back up that is corrupted, and when i try and restore my settings to the new IOS7 upgraded phone, it will not allow my old settings to be placed on the phone.
    I am therefore thinking of using an old back up from Time Machine, but do not know how to access itunes from time machine. Everytime I try and enter iTunes from my Time Machine vault it says Mac OSX requires the application and therefore cannot be restored.
    Please help or tell me what I should be doing instead.
    I have a feeling I will lose my app data and have to manually sort my home screens. Luckily all my contacts, emails, photos etc are synced to iCloud, but the back up of my iphone isn't as I don;t have the upgraded space on ICloud and have a iPhone thta has 16GB on it.
    Cheers in anticipation of your help
    Stephen

    Hi Lawrence. Thanks so much for that advice - I'm really grateful. I hope you don't mind me asking a couple more questions: I have found that folder via Finder - I clicked on Library then App Support then Mobile Sync and within that, there's a folder called Backup and within that, 4 files. I also tried accessing it via the Go/go to folder method you suggested (in case that revealed more which remain hidden unless I use your route) but I couldn't make that route work.
    I presume I'm looking at the correct files but please advise me if it's still possible that I'm not.
    I had already tried to look at these backup files in Time Machine. They appear to be backed up, going back a year. If I can restore one from yesterday, that should solve my problem. However I've looked through them randomly going back a month or more, and they all seem to have been created in 2013, and last modified then. Only one of the files has a more recent 'last modified' date. But surely Time Machine has captured each backup of the iPhone going back over time?   I'm baffled.
    I hope the above makes sense. I'd be really grateful for any further advice.
    steve

  • Time Machine taking forever and backing up extensive files.  Help!

    Ever since we upgraded my spouse's iMac, Time Machine has been acting up.  My Mac store/guru guy migrated all the files from her really old G5 to her "new" (refurbished) aluminum iMac... NOT from the external HD she used for her Time Machine back-ups.  When we connected the external HD to her new iMac, Time Machine automatically made a new back-up folder and did a complete back-up to that new folder.  That was unexpected but understandable.  After that, however, subsequent back-ups take forever, and Time Machine insists on preparing tens of thousands of files for back-up every time it runs, even though the great majority of said files had not been touched and did not need to be backed up.  I will periodically check Time Machine preferences during these interminable back-ups, and sometimes it will be stuck in the "preparing" phase, and sometimes in the "finishing up" phase.  The poor external HD just cranks and cranks and cranks.
    I've read many of the Time Machine-related questions and responses, but none seem to address this particular problem.  I tried putting the external HD on the Spotlight Preferences/Privacy/Indexing exclusion list, quitting System Preferences, then opening it up again and reversing the process to see whether Spotlight would re-index the external HD (per one communities suggestion I read), but that didn't seem to take place.
    I have yet to visit the site referenced several times as the Time Machine FAQ gold mine; will do that next.
    Any other ideas, anyone?

    Thanks, Joe.  My software is up to date.  I forgot to mention that, after this first began happening, I erased the external HD and had Time Machine start all over again.  It did the first, complete backup overnight, but subsequent ones still take longer than they should and it still prepares 90,000 - 120,000 items when it should be doing no where near that many files on an hourly basis.  I'm wondering whether the cable needs to be changed out, as well.  We're running OS 10.6.8.

  • My Imac drive just died. Always backed up with Time machine to a WD My Passport. But after connecting it to my other imac (also running Snow Leopard) all the files are missing. I click on backup.backupdb but no files - just applications. Any ideas?

    My Imac drive just died. Always backed up with Time machine to a WD My Passport. But after connecting it to my other imac (also running Snow Leopard) all the files are missing. I click on backup.backupdb but no files - just applications. Any ideas?

    Welcome to the Communities.
    We want to help you but unfortunately you have given us insufficient information.
    Please find a moment to tell us more about your machine, the model identifier, the OS version, and the total amount of RAM you have.   It also helps to know where you are, nothing specific, just the country.   Macs do not run on iOS 6.1.6 as your profile says.
    Then fill those same details in your profile for future use
    These documents may prove helpful .. Solving Time Machine problems        Pondini FAQ
    http://pondini.org/TM/  Troubleshooting.html

  • Time Machine Cannot Back up My Applications

    Dear Friends. My time machine cannot back up my applications and library although I do not put them in the lists of excluded files. I have macbook pro with retina display and I use Western Digital for my time machine. Please, help!

    Triple-click the line below to select it:
    /Library/Preferences/com.apple.TimeMachine.plist
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu. A Finder window should open with a file selected. Move the selected file to the Trash. You'll be prompted for your administrator password. Reboot, recreate your Time Machine settings, and test.

  • Time Machine cannot back up my Mac.

    Time Machine cannot back up my Mac.  Error reads:  "Files can’t be copied onto the backup disk because it appears to be read-only.  This was the 2nd time I tried today. The first time it said something about 'hidden files.' I haven't had trouble before.

    Restart the Time Capsule. Launch AirPort Utility and check for a firmware update.

  • I got a macbook pro 2008 and can not back up using time machine. it eject my external hard drive everytime. does someone has a fix???

    i got a macbook pro 2008 and can not back up using time machine. it eject my external hard drive everytime. does anybody has a fix???

    Does your external hard drive have it's own power supply?  It should.
    Is your external hard drive formatted with the NTFS file system?  It won't work.
    It needs to be formatted either with Mac OS Extended or FAT32.
    (There are drivers available to add NTFS support to OS X but their quality is unknown, especially the "free" ones.)

  • Photos. They are on my macBook, backed up on time machine. Copied them (hours and hours) to external hard drive. They are now in alphabetical order (19,000  of them) NOT IN THEIR EVENTS or date order-and have been taken with different cameras- help!!!!!!

    Photos.
    They are on my macBook, backed up on time machine. There are 19,000+ of them, some rescued from a pc crash- which I used the nifty iPhoto to put back into date order.    
    I want to take them all off my laptop, now............as I need to use it for WORK!!
    Copied them (hours and hours) to another external hard drive.
    They are now in alphabetical order (all 19,000+ of them) NOT IN THEIR EVENTS or date order. (-They have also been taken with different cameras over the years and some of the generic camera numbering remains.)
    I have tried to copy them (only a few as an experiment)  one event at a time, but that again "opens up" the Event "folder" and tips them out as individuals and therefore just lists image letters and numbers alphabetically.
    How can I copy
    the whole library still in  "Events" to an external hard drive?
    the folders/albums I have already made on to this hard drive?
    and how can I add to this back up monthly, again keeping events and folders separate and updated?
    Mac is so user friendly - there must be a way.........
    Thanks

    UPDATE : I have re-installed from disk, various apps that were no longer functioning such as iLife, iWork etc. So, I now can access my photos again.
    Also, I had to re-install all the software for my printer ( Stylus Pro 4880 ) and reset it so the printer is working again.
    Photoshop CS4 won't open. I think I will have to get in touch with Adobe as basically, I guess they have a built-in "blocker" which prevents me from opening the app as the license is for only 1 user and having re-installed the OS, there are now, in effect, 2 users ( Me and Me 1, I think ).
    So, having added on a new external HD, Time Machine has made a copy of most of the files, folders, apps etc onto the external HD. The internal HD is still nearly full ( 220 GBs out of 232 GBs ).
    I am guessing the way to go now in order to free up space on the internal HD is to delete/trash older photos from my iPhoto library and hope that if needed, I will be able to access them on the external HD.
    Am I correct ? Please advise before I do something I will regret.
    Thanks, Sean.

  • Can someone please help me re-install my Creative Design 5.5 on my Mac?  My MacBook Pro recently crashed and had to have the hard drive replaced.  The back up from Time Machine is not reinstalling the program.  Since I have the download paid, and codes, I

    Can someone please help me re-install my Creative Design 5.5 on my Mac?  My MacBook Pro recently crashed and had to have the hard drive replaced.  The back up from Time Machine is not reinstalling the program.  Since I have the download paid, and codes, I need direction on how to reinstall -- HELP?

    Hi bodegakc,
    If you have the serial number then please use the below mentioned link to download the product you are looking for .
    CS5.5
    Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
    You can also use creative cloud cleaner tool before installing.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Thanks
    Nikhil Gupta

Maybe you are looking for

  • Error while registering SAP ECC system in UWL systems

    hi, Error while registering SAP ECC system in UWL systems. Errors: System R3Production: Thu Nov 27 16:12:05 GMT+05:30 2008 (Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Thu Nov 27 16:12:05 GMT+05:30 2008 (Connector) :com.sap.mw.jco

  • Forms and Reports 6i

    Warm greeting to you all, I have installed oracle 8i enterprise ideation in my machine. This is a trial software. Connection from SQL plus is perfect and I have managed to manipulate Objects that came in the products default database. Also, oracle Co

  • Dstat on Solaris 9

    I use this nifty utility on my RedHat servers: http://dag.wieers.com/home-made/dstat/ Has anyone bothered with getting dstat to work on Solaris 9? This utility needs Python which will want a few other things installed, I wonder if anyone has bothered

  • "payment card info should be copied from the reference document" very urgen

    hi people, In ECC In the sales order ,we have a payment card field where we enter the credit card info of the customer. While doing the returns order by referring the same order,  the credit card info should be copied from the sale order. Scenario: I

  • What can be done with SpeedGrade CC that can't be done with a combination of effects in just Adobe Premiere Pro CC?

    SpeedGrade CC certainly makes it easy to adjust colors and whatnot, but can it do anything that Adobe Premiere Pro CC cannot do by itself (such as through lighting effects, multiple color correctors, etc.)?