Backing up IPad to ext. hard drive

How do I back up an IPad to a hard drive which will be connected to my IMac and using Time Machine?

See if this helps.
http://www.macobserver.com/tmo/answers/free_up_hard_drive_space_by_moving_your_i pad_and_iphone_backups/

Similar Messages

  • Trying to back up iPad to external hard drive, "iTunes library file cannot be saved. The disk you are attempting to use is full."

    This issue is somewhat complex so I will try to explain it as clearly as I can. Any help will be greatly appreciated.
    It all began when I kept getting popups from my iPad saying that I had not backed up since May. I realized that was pretty dangerous so I decided to finally try syncing it to iTunes, though I had avoided doing so for so long because I knew that when I tried there was no room on the computer. I then remembered that I have an external hard drive with plenty of storage space, so I got that out and set it up with a folder to move iTunes and the backup into.
    On iTunes I went to the Advanced Preferences and changed iTunes Media Folder Location to the G: folder, with the keep organized box checked. I also copied the previous backups from the original C: drive to G: so that I could delete the ones on C:.
    I used Junction Link Magic to link my now empty MobileSync backup on C: to a new (JLM would not work unless it was empty) backup folder on external hard drive G:.
    I plugged in my iPad to iTunes to sync it, and while it was backing up I checked the new folder on G: to make sure that the backup was being put there. It was.
    However, about halfway through I got the message "iTunes library file cannot be saved. The disk you are attempting to use is full."
    My question is Why? If it is being made in a 1.5 terabyte hard drive now, and not the computer, why is there no disk space? My guess is that it must still somehow be saving to the computer. But how? And how can I get it to save solely on the G: drive where there is enough room?
    I am running Windows XP and the latest version of iTunes.
    An additional but not as crucial issue:
    Much of my music has been lost, with the being displayed next to the songs in the iTunes library, and only 50 (purchased) songs remain on my iPad. This was because those missing songs were stored on a different external hard drive ( I:). However, I copied many of the music folders on I: over to G: so that everything could be together. I am wondering if it is possible for me to get these songs back onto my iPad. But this is not my most important issue right now, because I believe that once I get the first issue solved I can simply plug in I: and G: at the same time while syncing the iPad, and get the songs back.
    Note: I have come to realize the iTunes program itself is still under Program Files in the C: drive. Does this have to do with anything?

    Short term, free up some disk space. Long term, move the library to a bigger drive.
    tt2

  • How do I back up ipad to external hard drive?

    I want to back up my IPad (without the cloud) to an external hard drive that also will back up my IMac using Time Machine. How can I do this? Thanks!!

    There are some wireless external hard drives that can be used with the iPad.
    The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
    Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
    Another option:
    Expand your iPad's storage capacity with HyperDrive
    http://www.macworld.com/article/1153935/hyperdrive.html
    On the road with a camera, an iPad, and a Hyperdrive
    http://www.macworld.com/article/1160231/ipadhyperdrive.html
    Mac - How to Move the iPhone & iPad iTunes Backup folder to an External Hard Drive
    http://osxdaily.com/2011/03/05/how-to-move-the-iphoneipad-itunes-backup-folder-t o-an-external-hard-drive/
    Windows - Change iPad default backup location
    http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
    Windows - Changing IPhone and iPad backup location
    http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
     Cheers, Tom

  • Time Machine won't back up to my ext hard drive - 'read only' error

    My (two week old) external hard drive that is used for Time Machine has just given me this warning: Files can't be copied onto the backup disc because it appears to be 'read only'. It tells me to repair or reformat the disk using Disk Utility. I have my doubts as this is the third EHD that has gone this way over the past month. I use an iMac, OS 10.6.8. Is this a Time Machine issue that I can fix via changing some settings - I can't realisticallly accept that two top end La Cies and one brand new G-Tech G-Drive have corrupted in one month due to their own faults. Can anyone shed any light on this? I'd be really grateful.

    Please look over Time Machine FAQs & Time Machine Troubleshooting. If you don't have any luck finding your issue then please repost in the Snow Leopard forum, because TM is part of OS X and there is a TM section in the Snow Leopard forums that is where you are more likely to find someone that has the expertise you may need.

  • How to Copy a Specific Time Machine Back-Up to Ext Hard Drive

    I'm transitioning from a MBP early 09 to a MBA mid 11.  I pruned the MBP pretty well to migrate items from it to the Air, but I want to preserve the last "full" Time Machine back-up of the MBP to an external hard-drive.  Not the "latest" - as the lastest back-up includes the pruning need to migrate necessary items from the Pro to the Air - but one dated a few days before I began the pruning.  How do I get that specific back-up (currently on External Hard Drive A - 250 GB) onto a new external hard drive (Ext Hard Drive B - 1TB)?  I want to preserve that specific back up then ERASE Ext Hard Drive A to use as a portable for the the MBA.  Thank you.

    don't delete anything on the TM drive using finder. you can do it from TM interface. however, in your case it will not help because TM will always make a full backup after a system restore like you did and there is absolutely no way to avoid it. as suggested you might want to reformat the TM drive and start backups from scratch.
    BTW, to delete a single backup you start TM, scroll back to that backup, click on the "gears" action button in Finder's toolbar and select "delete backup".

  • Multiple iPhoto libraries on my ext hard drive back up

    Hi I have a problem with multiple iPhoto libraries on my ext hard drive back up  They are different sizes and large 120gb  Is there any way I can rationalise the libraries without the risk of losing data? My iPhoto library on the Mac appears to be complete but with >200gb of photos I cannot be sure.

    I upgraded to Lion OS and suffered multiple crashes necessitating a complete rebuild of the system - reformat the main hard drive and install Lion OS from a disk  In an effort to be absolutely sure I didn't lose data I have been overenthusiastic in transferring photos to the backup disk dragging and dropping files that contained images as well as a full transfer of "mymac" before reformating.  Time machine backup was not realistic as this was the one operation which caused most of the "hangs"  System now appears to be working well with Lion OS but I have masses of duplicate jpeg files in multiple folders and libraries - I am considering purchasing Duplicate Annihilator to deal with the duplicates then perhaps I should try to merge the libraries with iPhoto manager?  

  • I formatted my ext hard drive and changed it to mac os x extended(journaled). then i put in all my data back. after a while, i insert the hard drive but my macbook cannot read it. plz help

    i formatted my ext hard drive and changed it to mac os x extended(journaled). then i put in all my data back. after a while, i insert the hard drive but my macbook cannot read it. plz help

    SanandaDutta 
    tried on a different mac. The same problem exists.
    If that is the case, its extremely unlikely you have a bad USB cable on the seagate, rather as I mentioned earlier a bad SATA bridge card.
    If the Seagate 1TB USB external wont open on either Mac and youve verified same (try a diff. USB cable if you have one however this is nearly never the case),....then to get the data off that HD (unless it is dead which is also extremely unlikely),......then you would need to extract the HD from its case and insert same into either a HD dock or USB HD enclosure.
    8 out of 10  seemingly dead inopperable 1-3+ year old external HD are perfectly fine, rather the cheap 50 cent SATA bridge card fries and dies (alas)
    reply back if you need help in extracting same. 

  • I purchased a IMac in Feb later I added a Seagate ext. hard drive. On April 29 I received an errors that the ext. Drive may be a read only and not backing up files. I'm unable to check disk permission or correct errors. Help would be appreciated.

    I purchased a IMac in Feb later I added a Seagate ext. hard drive. On April 29 I received an errors that the ext. Drive may be a read only and not backing up files. I'm unable to check disk permission or correct errors. Help would be appreciated.

    Click on the hard drive on the desktop, then File > Get Info. What does it say about permissions?  If this is just a data drive you may want to consider "ignore ownership on this volume".
    Otherwise I can only say I have not been reading good things about Seagate drives recently.  I have some of their rock-solid ones from about 10 years ago (still running well), but now...?

  • Where are my purchased movies through iTunes stored on my PC?  I need to back-them up on a hard drive and then I want to play them on my iPad

    where are my purchased movies through iTunes stored on my PC?  I need to back-them up on a hard drive and then I want to play them on my iPad

    They're in the iTunes folder, in iTunes Media or iTunes Music depending on when your iTunes was first installed. The iTunes folder by default is in My Documents/Music.
    Regards.

  • Just bought 1T ext hard drive for back up, addl storage, boot backup?

    I am a NOVICE. Just purchased 1T ext hard drive for backups and additional storage for music, docs, photos, etc. Should I partition, and also include boot? Does this mean 3 equal partitions? Or how much should be dedicated to boot drive? In case you couldn't tell, I am talking over my head.

    Thank you for responding. I didn't even know I was Snow Leopard. I should have the disks somewhere, though I'm not sure where the "safe" place is that I put them. The ioSafe instructions suggested Time Machine, though I've heard it can have issues. The external hard drive instructions also suggested using 1 partion and Apple Partition Map, but I see comments suggesting that GUID is better for intel macs which I believe this is as the info says:
    Processor Name:          Intel Core i3
    The "about this mac" info says memory 4 GB. When I select "get info" on the HD it says Capacity: 499.76 GB. So I'm not sure. I have a lot of music CD's I want to install my itunes library currently contains 3.32 GB and that is nowhere close to all the music I want to add. I also need to save MANY text docs, large PDFs and high resolution photos. And would like to start exploring creative Adobe Software, and don't know how big those files end up being.

  • I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac.  Any suggestions?

    I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac. The drive is not listed in Disk Utility.  Any suggestions?

    Is the computer in you equipment line:
    Dual Core Intel Xenon
    (which is not a PowerMac but a Mac Pro) the one you are asking about, or do you have an older PowerMac?
    If a Mac Pro, their forums are here:
    Mac Pro
    and, as Mac Pros have a totally different architecture from the pre-2005 Macs this forum covers, you may not have the same issues that can affect the older models. If someone didn't notice your equipment line, you could get advice that doesn't apply.
    If you really have a pre-2005 PowerMac, read on.
    If the stubborn external is USB and does not have its own power brick (i.e., it gets power only from the computer's UBS ports--"bus powered"), it may not be getting enough power. As electric motors age, they can demand more power than when new, and the power available on any USB port is limited.
    The typical workabouts to making a computer recognize an aging, bus-powered USB drive are:
    Get a powered USB hub (has its own power brick
    Get a "Y" USB cable: 1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
    The second gets power from two USB ports on the computer and often that's enough.
    Remember that the USB ports on your keyboard seldom provide enough power even for a thumb drive, so be sure to use the USB ports on the back of the computer.

  • I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. suggestions to complete backup please?

    I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?

    Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
    If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first.

  • Problems trying to store iTunes on external hard drive and back up iPhone to internal hard drive?

    Hi
    I have been tirelessly trying to relocate my entire iTunes function to an external hard drive to free space on my laptop. I have migrated the iTunes library (from the 'My Music' location on laptop) to ext hard drive and also reinstalled iTunes, asking to save all files during set up to the ext drive (not in default 'Program Files' on laptop). I have also pointed iTunes to the library's new location on the ext hard drive. I did this after reading a recommendation on here that it is better to have both my library and all other iTunes files in the same place.
    One of the problems is when I have moved the library, it has for some reason created two iTunes folders on the ext drive with different music in each, but the library database file is only available in one of them, and I am not sure if all the music from both folders is available in iTunes.
    Another huge issue is that when I have tried to back up my iPhone to the computer (as recommended to do after migrating the iTunes program to another location), it is not letting the process complete; I get an error message saying it cannot save to the computer. It seems the location of the back ups (C:\Users\username\AppData\Roaming\Apple Computer\MobileSync\Backup) isn't compatible with the new location of my library etc (on my ext drive)and from searching the internet for a solution, it seems you can't change the location of where back ups of an iPhone are stored.
    So, does anyoine know if there is a fix-all solution to these dilemmas? Or should I just keep my library on one drive and the iTunes program on my int drive?
    Thanks in advance
    VR

    Hmm.
    I'm sure I'd successfully tested the command line version of the move instructions at one point, but I'm getting the same "access denied" error when I try. Maybe "Move" doesn't like working with folders when the path contains sections with hidden or system flags. Anyway herewith version 3 which I've just tested works as described...
    Relocate iOS device backups
    Assuming you're running Windows Vista or later you can use the following steps:
    Using Windows Explorer move the current Mobile Sync Backup folder from C:\Users\<User>\AppData\Roaming\Apple Computer\MobileSync\Backup to your chosen location, e.g. as  X:\Backup where <User> is your Windows user name and X: is your preferred drive.
    To make iTunes look for the data in the new location open a command prompt by hitting the start button and typing CMD<Enter> in the search box that opens up, then type in this command and press <Enter>
    MkLink /J "C:\Users\<User>\AppData\Roaming\Apple Computer\MobileSync\Backup" "X:\Backup"
    If your external drive has a different letter or you already have a folder called "Backup" then edit "X:\Backup" accordingly.
    If you're still running Windows XP you can use Junction (cmd line tool) or NTFSLink (shell ext). In both cases you move the existing folder to a new location, create an empty folder where the old one used to be, then use the tools to get the operating system to link the two together and silently redirect any file operation on the old location through to the new one.
    Note that while this method works for iOS device backups it cannot be used to redirect sections of the media library. iTunes will break the connection the first time it tries to write a file to the target folder.
    What happens when you want to sync the device? If you're getting a warning about erasing and reloading the device with media from the current library then something is wrong. If you moved the library files correctly and then reconnected them to iTunes this should still be the "home" library of the device and it should sync as if nothing had changed. If not then revist the make a split library portable post for advice. See also Recover your iTunes library from your iPod or iOS device if for some reason you accidentally erased the original library files and all backups thereof.
    tt2

  • My photos are stored on ext. hard drive, and now I can't see them

    I recently moved all of my photos over to an external hard drive, and have been quite happy with the freed up space on my ibook. I have been able to view them flawlessly until a few nights ago. Our power went out, and then came back on (yes, I know I should have a battery back up), so of course the ext. harddrive turned off with unmounting, and since then, I cannot view my photos in iphoto. There is still the correct picture count registering, however in place of all of my photo thumbnails in IPhoto, now I am only seeing grey boxes in the same shapes as the thumbnails. I have tried everything, including unmounting the ext. hard drive. I am at my wits end and have been working too much to go into the genius bar.
    Anyone have any suggestions?
    Thanks,
    Jerrod

    Hi Jerrod,
    A couple of things for you to try:
    -Launch iPhoto with the Option key depressed and choose to open another library. Navigate to the one on the external and choose it.
    -Delete your iPhoto Preference file
    Preference file
    -rebuild your library
    Try this:
    Before doing a rebuild make sure iPhoto's trash bin is emptied. You can do this by control clicking on the trash bin, or from the menu bar under iPhoto.
    Close iPhoto
    Duplicate the iPhoto Library folder
    Drag the duplicate to the desktop (hopefully you have enough room on your hard drive for the duplicate.)
    Launch iPhoto holding down the Command and Option keys until you see the rebuild options screen.
    Choose the first three options. If you were missing photos in your library, also choose the last option. Be advised that you will get a roll of orphaned photos and it might be quite huge. Most of them will already be in your iPhoto library, but use caution when deleting anything from this roll until you are sure the photos are still in your library in another place. It might be a good idea to share/export this roll of photos just in case you need to import them again.
    Back to the rebuild, depending on the size of your library it might take some time. When it is done, hopefully your photos will be there.
    You might see some unexpected results as I did when I did a rebuild. Photos had been moved to wrong dates, video clips had lost their duration info and some were even orphaned from the jpg pointer file. It took me some time to straighten it out again.
    This is the reason to make a duplicate before you rebuild, in case you do not like the result. If you don't like the result, close iPhoto, then delete the rebuilt library and drag the duplicate back into the Pictures folder making sure the name is iPhoto Library. Launch iPhoto and it should open the library in the Pictures folder.
    iPhoto 4 or later: Rebuilding the iPhoto Library
    -Navigate through the iPhoto Library folder and make sure your images are still there and open when double clicked.
    This is a view of how the iPhoto Library looks in the Finder.
    It is organized by Year folders. Inside the Year folders are Month folders. Inside the Month folders are the days of the Month. Inside the day folders are the photos you took on that day. If you imported video clips and RAW files on that day they will be in an Originals folder. If you have edited any photo imported on that day, the original will be in that folder also.
    Please get back with the steps you tried and the results.
    If none of these suggestions work, you can create a new library and import from the old.
    Close iPhoto
    Rename your messed up iPhoto Library to "iPhoto Library_old"
    Drag this library to your desktop
    Hold down the Option key and launch iPhoto
    This is the window you will get
    Create a new library or choose a library to open
    Choose to create a new library
    Once this new empty library is open it is time to import the images from your old library
    Go to File>add to library
    Navigate to the old library on your desktop and choose it.
    iPhoto will start importing the images from your old library
    This is what to expect:
    Your images will be imported in nice dated rolls. (make sure your view is set to sort by rolls to see it) There are a couple of caveats to this. You will get rolls named "Originals" These rolls will contain your video clips and your original images that you had edited. If you had RAW files they would be in those rolls too (I don't do RAW, so I don't know for sure) Delete what you don't want from those rolls. You will also get the jpeg pointer files to your video clips imported. They will just be jpegs and will not point to the video clips anymore as iPhoto made new ones when the clips were imported again. You can delete those. they should be in a roll right next to the newly imported video clips so they are not hard to find. The thumbnail files don't get imported as iPhoto makes new ones when the images are imported.
    Once all you images have been imported, check through the library and make sure everything looks ok.
    You can now start making your Albums, and do your keywords or any other organizational steps.
    You can also delete the old library on the desktop.
    It is also a good time to backup this new library to CD/DVD by burning the iPhoto LIbrary folder in the Finder, or copying the iPhoto Library folder to an external drive formatted for Macs, or copying the iPhoto LIbrary folder to an iPod.
    Good luck!
    Lori

  • ITunes can't "see" music on ext. hard drive....have to manually find

    I have had my music/movie library (approx. 50gb) stored on an external hard drive and have been managing the music with iTunes for my iPod.
    Now, for some reason, approx. 75% of my library has an exclamation point next to the song name on iTunes indicating that the song cannot be located.
    Is there an easier way that manually searching file by file to show iTunes where these songs are located on the ext. hard drive?????
    This would take hours and hours.
    I am somewhat desperate and am hopeful that anyone with advice can't respond.
    Thank you.

    I don't know if you've already found a solution to this problem but this tends to happen to me when I forget to plug in the external hard drive before I open iTunes. What happens is that iTunes automatically creates a new iTunes Music folder in the iTunes folder of your Music folder (if you follow my drift). iTunes then looks for your music there;but it's not there because it's on your external drive. It then puts an exclamation mark against any music file that it can't find there. If you go to iTunes-preferences-advanced,click change,and change the iTunes Music folder location back to the folder on your external hard drive,or,if no folder,the hard drive itself,where the physical files are kept then iTunes should update its library and find them. If,of course,you've imported files while the iTunes Music folder is back in it's default position,they will have to be reimported.Make sure 'Copy files to iTunes Music folder when adding to library' is ticked,drag them out of the default folder to the desktop,double click,iTunes will reimport them to the external hard drive.Trash the files from the desktop when they've been copied over. Of course,there may be a simpler way of doing this but it works for me. Hope this helps.

Maybe you are looking for

  • Problem streaming music with New Apple TV- Anyone else?

    I am new to Apple TV.  I have been using a Sony BDP580 (DLNA) to stream my FLAC digital music via a wired LAN.  It works flawlessly.  I just got the new Apple TV for streaming. I set it up and home shared with my Itunes library containing AIFF digita

  • Java.lang.NullPointerException for FTP listening channel in B2B

    Hi, We are getting this error for FTP listening channel in B2B. These are the parameters details that we setup in B2B listening channel: Host Name ,Polling interval =60 ,Folder name =Get, username ,password,confirm password, minimum age =120000,Trans

  • A few problems using beans.....

    Where to start... Well, I have got a servlet that creates a new instance of a bean ('generalBean'), then the 'generalBean' runs a query within the DB it connects to. Then 'while(resultSet.next)' it creates an instance of another bean called 'detailed

  • Accessing BAPI through Tree UI Element

    Hi, I have one Tree Structure where i have to populate one BAPI and display the data on the browser .I have created two tree node elements and finished the binding  .The  tree is getting diaplayed in the browser. But i am facing difficulty in populat

  • I had new roller kit installed on my laser 3500N. Now it prints about 1/4" to high on paper

    How can I fix printing 1/4" high on paper since I had new roller kit installed.  Tech can't solve problem.  Is there adjustment in printer paper path?