Backing up library stops

I've created a playlist to back up my itunes library. everything seems fine when I insert the DVD+R disc, but then the system just stops. I've never had any problem burning CD's. I did switch the setting in burning to DVD. I have version 10.4.2 so it should work for DVD's too, right?
eMac   Mac OS X (10.4.2)  

You should get some type of message that says library is too large for one disc, do you wish to use multiple discs? Say yes, then iTunes will prompt you to insert another disc at the appropriate time.

Similar Messages

  • Help! Can't back up library to disc

    My computer has cooties, so I plan to reformat and start over. The only things I'm afraid of losing are a few pictures and my iTunes library (about 10 gigs).
    When I try to back up library to CD-R, everything works until I see "Burning Disc...finishing". Then it just stops. No prompt to insert another disc, no nothing. It does the same when I burn an audio disc, but when I eject the disc (despite warnings) it plays fine. But to back up, I need to insert like 16 CD-R's. Any suggestions?

    Update: Success! I used my iPod as an external hard drive following these instructions:
    http://support.apple.com/kb/HT1329?viewlocale=en_US
    After I reformatted I reinstalled my old iTunes 6 and dragged the folder back to My Music. At first, iTunes wuldn't sync a couple hundred songs to my iPod because I wasn't "authorized" so I had to enter my Apple ID and password. Downloaded latest software for Itunes and iPod and all is good.
    Investing in an external hard drive still sounds like a good idea, since this was my first reformat and it was a bit nerve-wracking.

  • Shared music and movie library stops loading

    The shared iTunes music and movie library stops loading on my ios devices.
    iTunes 11.1.5 is set up for both home sharing and library sharing over my secured home wifi network. Home sharing between the mini that is running iTunes and my old Macbook works without any issues.
    My ios devices can see and will eventually connect to the shared library but connecting is pretty slow unless the ios devices are in the same room with the mini.
    After a few hours my ios connection to the shared music and movie library drops and stops loading halfway when I try to reconnect.
    The ipad is running ios 7.1 and my iPhone is running ios 6.1.3.

    Hi Jay Clay and Hagerty,
    I'm in the same boat.  I'm running iTunes 11.2.2 on a Macbook Pro (running 10.9.3) and iOS 7.1.1 on an iPhone 4s; so running the latest version of software is not the issue.
    The username logs in correctly on all devices and I can actually see the iTunes library available to share on my device.  From "Music" on the phone, I go to "More > Shared" and then select the library that is shared from my Macbook.  So I know that the login information is correct.
    The circular status wheel begins to load and gets halfway around before it stalls and does not resume.  This process happens repeatedly, so it's reproduceable and consistent -- not a one-time issue.
    I've tried restarting both systems, but the same problem ensues.  I've also tried signing out and signing back into Home Sharing on all devices, which did not resolve the issue.  I've read and followed all the recommendations in "Troubleshooting Home Sharing", but these really only offer solutions if you're not able to see the shared library; which is not the issue that I believe Jay Clay, Hagerty and I are having.
    Some thoughts:
    Could it be that the iTunes library is too large?
    Could it be that Home Sharing times out if the library is not loaded in a set amount of time?
    I've attached a screenshot of what I'm seeing on my iPhone, for your reference.
    Also, here is the confirmation page I'm seeing in iTunes, so Home Sharing appears to be working.
    Thanks in advance for your help!

  • HT4059 Started writing a review of book after reading.  Cannot close out window to get back to library.

    Started writing a review of book after reading.  Cannot close out window to go back to Library.

    A few days ago I ran Onyx and it told me to repair disks from my boot up disk..
    Did you do that? If not, you should follow these directions:
    http://support.apple.com/kb/TS1417
    If you did, was the repair successful?
    Basically, the 'licence' window that comes up when you open certain applications e.g. Aperture, doesn't disappear like it is supposed to and just stays put..
    Sounds like those applications are crashing at startup... unless they are opening other windows behind that "splash screen" window, in which case there's something very weird going on. If they just get to the splash screen and then stop, they've crashed.
    Sounds like whatever hard drive problems you had have caused some corruption to important parts of your system or those applications. I would imagine you're going to have to reinstall those applications at a minimum. Since it seems like it's happening with new apps that you have downloaded recently, though, it's more likely you're going to need to reinstall the system.
    Whatever the case, if you don't have good backups, the absolute first thing you need to do before you do anything else is to make a backup. See my [Mac Backup Guide|http://www.reedcorner.net/thomas/guides/backups> for help with that. Depending on the level of damage your hard drive experienced, though, it may be too late... there may be documents somewhere that are damaged and can't be opened that you haven't discovered yet.
    If you reinstall the system, I'd advise moving your data back over from a backup manually and reinstalling applications from scratch, using Migration Assistant sparingly, if at all. You don't want to move damaged settings files or applications back onto a squeaky-clean system.

  • Can t back up library to disc. error 2131 . whats wrong ?

    Hi , Can anyone help me back up library to disc. error 2131 keeps appearing.

    Update: Success! I used my iPod as an external hard drive following these instructions:
    http://support.apple.com/kb/HT1329?viewlocale=en_US
    After I reformatted I reinstalled my old iTunes 6 and dragged the folder back to My Music. At first, iTunes wuldn't sync a couple hundred songs to my iPod because I wasn't "authorized" so I had to enter my Apple ID and password. Downloaded latest software for Itunes and iPod and all is good.
    Investing in an external hard drive still sounds like a good idea, since this was my first reformat and it was a bit nerve-wracking.

  • In Lion the command to back up library to disc has been removed? How do I do this now?

    In Lion the command to back up library to disc has been removed? How do I do this now? Apple Support has given me a case number and accelerated it with a call back in a few days, and even the techs were surprised by the removal of the ability to incrementally back up to any kind of disc any items added to the iTunes Library since it's last back up.
    While this command was in all previous iterations of iTunes, even most of the techs are working from iTunes 10.3, the Lion version has this removed. Help only mentions Time Machine as the back up method. Sorry, I've had too many hard drives go bad, and not one DVD or CD has failed when I needed to retrieve a past purchase or addition of any kind to the iTunes library.
    Purchasing from the iTunes store just got less viable, IMHO.

    Dave-
    Thanks for the feedback. Those nasty old deprecated features, eh? Seems you are correct that it will now be a third party solution.
    I just finished chatting with Mike Bombich about using his Carbon Copy Cloner 3.4.1 ( http://www.bombich.com/index.html ) to do the job.
    He gave me a rough outline of how to set it up for incremental back up of iTunes ~/Music/iTunes or
    ~/Music/iTunes Music. Creating filters ( http://help.bombich.com/kb/explore/excluding-files-and-folders-from-a-backup-tas k#creating ) tells how to create and save different tasks.
    I'l check it out and report back shortly.

  • HT203177 I had to get a new hard drive in my 27 in IMac. I used time machine to get everything back on my computer. I just turn on time machine and its says it's preparing over 800,000 items to back-up, it never back-up, it stop and starts the process ove

    I had to get a new hard drive in my 27 in IMac. I used time machine to get everything back on my computer. I just turn on time machine and its says it's preparing over 800,000 items to back-up, it never back-up, it stop and starts the process over again.

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then repair the backup/TM drive.

  • USB port at back of iMac stopped working except keyboard. Why?

    My USB ports on back of iMac stopped working, I can't seem to get any power from them. Only keyboard port works..
    My externals don't work neither and I got all my hard work on them. I think I've lost info?

    I have no idea what happened. However, I believe that you've got to take it back to the service provider and work with them. Call them and tell them what happened and see what kind of a response you get. You might want to try to get in touch with Apple Customer Service and see if they can help you out with the service provider.
    As for "compensation", that is probably a legal matter unless you have some kind of insurance that covers you for business losses. You might try to stress to the service provider that they should do whatever service is now needed to get the machine working again at no additional charge.

  • The iphone has been acting weird. my iphone doesnt charge whenever it is switched On. When I switch OFF the phone, it charges for 2 mins then comes back On and stops charging. I dont know what the problem is. trust me, the problem isnt from d charger

    the iphone has been acting weird. my iphone doesnt charge whenever it is switched On. When I switch OFF the phone, it charges for 2 mins then comes back On and stops charging. I dont know what the problem is. trust me, the problem isnt from d charger. PLS anyone with any solution

    @wetdro
    If your device has been jailbroken during the warranty, Apple will not service it.
    Maybe you missed that in this article:
    Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
    Apple strongly cautions against installing any software that hacks iOS. It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software.
    copied from Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issu…

  • Why did my event library stopped showing my partitions and external drives?

    The event library stopped recognizing my computer partitions and my external hardrive. It looks like all events are available, just not organized by partitions and drives. The partitions and external drive still show up in the project library.

    I don't see anything like what you mentioned... " having a folder at the root level that emulates a camera, a folder with a name like DCIM or Private." Here are the windows showing the files on the user/HD, the tutorial image and the external drive. You can see the Final Cut Folders in each. In the past, I would see each of these in the Event Library so I could create a new event wherever I want to store it. I have also included a screen shot of FCPX showing the Project Library. It still shows the various devices, as I am used to seeing in the Event Library.

  • Cant back up library to disc

    im trying to back up my entire library to disc so i bought a bunch of CD-Rs and DVD+Rs, and neither way works. when i use the DVD+R to back the library up, it gets halfway through the first disc and i get an error message and it tells me it cant back it up. then when i tried the CD-R (brand new ones), i insert the first disc and it tells me that it's not blank... i know it can fit on 3 of the DVD+Rs, and i like that way better anyway because it can fit easier on the dvd's, and it starts to back up about half of the first disc on the dvd, but then out of nowhere it says there's a problem...
    any help is appreciated

    Thank goodness, I thought it was only me. When I tried to backup my new purchases it comes up with unknown error 1951, when I try to back up my entire library it pops each disc out saying insert blank disc. I even bought a brand new pack of discs. anyone have any ideas out there???
      Windows XP  

  • The forward, back, refresh, and stop buttons are not working. Even after installing the latest version. Anyone else having this issue?

    The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.

    Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

  • I am unable to update my iPhone from ios4 to ios7, I know you have to do this via the computer however the backing up process stops part way through and it is unable to carry on

    I have ios4 on my iPhone 4 and I have tried to update it to ios7 and to do this I know you have do use the computer. however part of the way through, the back up process stops and nothing else happens

    I would suggest that you tru and update through iTunes on your computer. Also, could you connect your computer up to the internet using a wired connection rather than wireless - this will be faster and more reliable, particularly when you need to download a large file.
    Then try your update. This time, in iTunes, why not try to get it to download the sofware first (Download Only). You can then appy it to your iPhone later, once it has downloaded.

  • Noise Partially Comes Back in Library View & Exports

    Ok I have a very strange thing happening in LR3.  When I select a very noisy image in my library and take it into develop mode, convert it to 2010 calibration and make the adjustments to noise it looks spectacular.  But when I click to go back to Library mode the noise partially comes back.  So it looks partially crappy again. When I export the photo it exports as it looks in library view, poorer than when in develop view.  I find that it is more noticeable on certain colors like browns but still noticeable on anything I have tried nonetheless.
    So I thought to myself ... lets check it in LR2!  Discovered the strangest thing.  When I do it in LR2, I get the opposite effect.  It actually looks better in Library mode than in develop mode.  I never noticed that before.
    Is anyone having the same issue?
    I am using an i7 iMac 27 inch with 4GB RAM and OSX 10.6.4

    When you compare noise in something versus another, always examine the pictures at 100% view. Otherwise, you risk too fool yourself.

  • How the **** do i get back my library i was just using.No didn't save image or restore been using it for months the same way no tells me to choose or create a library and my previous versions don't recover

    How the **** do i get back my library i was just using.No didn't save image or restore been using it for months the same way no tells me to choose or create a library and my previous versions don't recover.Please help I just deleted all doubles did allmy artwork Etc..

    Do you have a back up?
    If not you're into using file recovery software like  File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
    There are other such apps. Search on Macupdate or the App Store

Maybe you are looking for

  • Unique id For System Message

    Dear all,    Any one can please tell me the unique id for System Message.  Also i want to know the unique id for 'yes' and 'No' in System Message. Its very urgent Thanks in advance with Regards G.shankar

  • Firefox on Android Jellybean 4.2.2 is soooo slow?

    I am a long time user of Firefox on my PC. Could not do without it anymore :) So ofcourse I did install it right away when I got my Samsung Galaxy Tab 3 WiFi with Android Jellybean 4.2.2. And it is like a total other world: it is sooooo slow. It take

  • Guest Domain Freezes with 100% utilization

    I setup LDOM on a Sun Fire T2000 with one control domain and one guest domain. The guest domain is sharing the disk (on slice 6) with the control domain. The slice is set as boot disk for the guest domain. Upon starting the guest domain, the utilizat

  • Having problems with lack of sound in movies

    i at first was having trouble transferring movies to my iPod (sad, i know), but after reading about the "convert" command, was able to transfer the file to my iPod. however, now when i try to play the file on my iPod, there is no sound. at all. sugge

  • GX620 - finding recovery media

    Hi everyone, I have a gx620 whose hard disk has been accidentally wiped clean (recovery partition included), and no recovery discs!    Two questions: - could I restore the system using someone else's recovery DVDs (for this model or a similar one)? -