Backing up multiple HDs onto Multiple HDs

I have 4 1TB hard drives that I am trying to backup onto 8 500GB hard drives. I have done this in the past manually, but its been a major headache, as I ususally have to split up folders across multiple drives to make it fit properly.
Can anyone recommend and application that would assist in this kind of backup procedure...in particular, one that would also allow me to synchronize/update the backup to reflect changes made to the source drives?
Thanks!

THanks for the suggestion...I've thought about doing that, but the problem is that when you do configure two 500GB hard drives together using disk utility, it somehow consumes a relatively small amount of hard drive space to pull-off the raid configuration...this leaves my two 500Gb drives with something like 900GB of disk space, and that won't cut it for my backup, as the source drive is completely maxed out...Plus there are performace issues, as well as reliability issues involved when creating a RAID using two independant drives by using Disk Utility...
Thanks for the suggestions though...Anyone else know of an application out there that can assist me in accomplishing my goal here? Thanks!

Similar Messages

  • Burning a set of pictures multiple times onto CDs

    I'm trying to burn a set of pictures multiple times onto CDs with Lightroom. Using Export I can burn one set but if I'd like to burn another set I need to Export again and overwrite the existing files every time. Is there no way in Lightroom to burn another CD with the files that are already there?

    The transfer is meant to be one-way from iTunes to iPod. Are the songs on the playlist iTunes Store purchases or were they ripped from your personal collection. If iTunes purchases, you should be able to transfer those from the iPod. Read the following doc for specifics:
    http://docs.info.apple.com/article.html?artnum=93063
    If not iTunes purchases, your best bet is probably to connect the iPod to the first computer and enable disk use on the iPod. Then copy the song files to the iPod's hard drive space. When you connect to the second computer, drag the files from the iPod's hard drive to your computer. You will then have to authorize the computer to play them. (You're allowed up to five authorizations.)
    Post back if you need more help.

  • Backup itunes onto multiple DVDs

    I am wanting to backup my itunes to multiple DVDs and not sure how to do it. I have copied all of the files to a 'burn file', and have tried to start burning...but am told that all of the files need to fit on 1 DVD. Surely there is a way to burn onto multiple DVDs? I will need about 4.
    If this isn't an option, what are some other suggestions about backing up my music. I don't want to regret not backing up later!!
    thanks!
    ibookG4   Mac OS X (10.4.2)  

    This isn't really the forum to post this in, as 'Feedback about DIscussions' means posts related to the Apple Discussions Forums, eg 'why can't I log in on Mondays?' 'this poster is shouting at me' etc.
    Are you a member of .mac? If so you could use the iLife plan (or create a new iTunes plan) to backup your music across multiple DVDs.
    Matt

  • Back to My Mac and multiple iCloud accounts

    I have an iMac at home and a Macbook I travel with.  Previously I had just one mobileme account, and BTMM has worked like a champ.  I now have multiple iCloud accounts in my household, as my wife mostly uses the iMac and I have the macbook.  I very much enjoy the seemless sharing of iCal calendars and the syncing of email accounts over multiple macs and mobile devices.  Trouble is to make BTMM work you have to enter preferences-->iCloud and log both computers into the same iCould account.  Surely apple must have forseen this sort of problem.  I as an indivdual if you have TWO computers and no one else uses them, it's no big deal to have everything on one iCloud account.  But with multiple users, with multiple email accounts, that's just not realistic.  I thought I may have found the work around when going to System Prefs-->Users & Groups-->and adding multilple Apple User IDs, but that doesn't work.
    Any one else frustrated with this?  Similar issues with Photo Stream, it would be nice to view other photo streams.  Anybody got any ideas?  Other than logging out of my iCloud account when away....getting all the warnings about deleting stuff off my mac with regard to iCloud..... and logging into my wifes iCloud account?
    thanks
    x

    I share this frustration. Over last weekend I needed to leave my computer at home while we went across the country to visit family. I found out there I needed to access my computer and finish an item before I was to return. We brought my wife's MBAir with us just in case, and good thing too. Either way, I was required to sign out of iCloud for her, then sign in as myself. This deleted all her iCloud contacts, calendar, mail, etc. Then it had to reload mine, then when finished i had to do that process all over again for her account. It would seem a quite simple task to allow multiple iCloud accounts to view a set of computers set to any of the iCloud Apple ID's. There is a function similar to this on my TimeCapsule. I can put both of our AppleID accounts onto that device and both of us can see our TimeCapsule and all attached storage while away from home (brilliant by the way), great for accessing movies I have stored on the TimeCapsule. Any results on how to make this work? Thanks

  • Write Back from OBIEE 11g to multiple tables in DB

    Hi All,
    We have requirement to write-back from OBIEE 11g to multiple tables in DB.
    1) Inserting a new row in report. Inserting record into multiple tables through OBIEE?
    2) In report we have fields like Region Id, Product Id, Date, Quantity. Region Id, Product Id, Date are dimension fields and Quantity is Fact measure while inserting row in report does OBIEE checks Refrential Integrity Constraint during Write Back on DB.
    Let me know if you need more details on this. Thanks in Advance.
    Regards,
    Rajkumar.

    Hi,
    1) With regard to inserts into multiple tables, try using multiple insert tags (I haven't tried it) but I think it should work.
    2) I don't think OBIEE would check referential integrity , but DB would and give you appropriate response.
    Let us know how you got on...
    Thanks & Regards

  • Insert multiple files onto a single track, not one file per track

    Hello,
    In both Audition CS5.5 and CS6, when the user inserts multiple files into a multitrack session, they are placed on multiple tracks. (As the help file says, "The files are inserted on separate tracks at the current time position"). Please change this to allow multiple files to be inserted onto a single track.
    I can understand the usefulness of the current behaviour in some scenarios, but there are other workflows in which the placement of multiple files on multiple tracks is a serious hindrance.
    E.g. In this thread, a user mentions needing to insert 10,000 individual files for dialogue editing and mixing.
    I also posted in that thread because my own workflow involves editing hundreds of individual files, which are single notes recorded for the production of virtual instruments.
    The reason why a "one-track multitrack" workflow is useful to me is that it allows great flexibility in processing multiple files individually or at once, comparing them, adding markers, fades, etc.
    It would also be useful when bringing in any audio that has been recorded in consecutive chunks - field recordings, concerts, Foley sessions, etc.
    In the thread, another user suggested inserting all the files onto a single track in Premiere Pro, then bringing that project into Audition as a multitrack session. Unfortunately this creates another problem for me, because it renames all the audio with the suffix "extracted". My workflow requires me to keep the original file names, because these are used downstream when mapping the recorded notes in the virtual instrument.
    Thanks for reading and please consider this for a future update.

    Just curious. Has there been an answer yet as to how to insert existing audio clips from a file to a waveform view in CS6. I create voiceovers or edit large interview files that require audio tones and sfx for my clients in production studios. The tones are inserted between takes as a courtesy tone to denote separation.  In the older versions of Audition, the function was as simple as mix/pasting an audio file, selecting insert or overlap, set the import level percentage and paste.  And each time this function was exercised, Audition would use the same settings you last used to reduce repetition of settings. Logical. That's all gone in CS6 ... so, to lay down a voiceover file for Comcast or any client, in waveform view (vs. Multitrack which is not necessary for single mono file editing) I have to go through unnecessary steps simple to select insert/mix paste>file>paste into existing wave form.
    Also, if I need to simply overlap a gasp over the last syllable of a phrase in a simple wave form, I don't appear to be able to do this.  I called Adobe for support on these function, but, they had not answers and simple said I couldn't change the workspace, and they had no other answers. Any help would be greatly appreciated if you have insight.

  • Printing multiple photos onto one page

    Sorry, fairly new to PSE9!
    Have a group of photos I need to print to actual size (3cm x 4cm) to go into a photo frame.  They are all cropped and ready to go but there doesn't seem to be an option to print multiple images onto one page at a custom size?  A contact sheet only gives me the option for the number of columns and picture package doesn't give any such option either as far as I can see!  I'm sure I must be missing something here!
    Any help much appreciated!  Don't want to waste photo paper printing each small photo individually!

    http://www.elementsvillage.com/forums/showthread.php?p=206785#post206785
    Post #6 in this thread provides standard directions.

  • Separating a database onto multiple servers

    We are working on a product that uses a set of SQL Server databases that are currently all in one instance and on one server. Now that we are growing, we need more processing power/space. So we want to move the databases onto multiple servers.
    So we would not need to "shard", we created separate databases (with the same schema) for each company that purchased the product. We could readily put different company databases onto the different servers.
    The question is this, how to we handle the routing to the different servers?
    If we would have "sharded" the data in one database with different keys, SQL Server tools would have handled the routing for us. Because we actually separated the databases, do we have to do the routing manually? (That is, do we need to figure
    out that when company A logs in that they need to go to database server aa.aa.aa while compay B needs to go to server bb.bb.bb?) Or is there a product that can help us with the routing?
    Thanks!
    www.insteptech.com ;
    msmvps.com/blogs/deborahk
    We are volunteers and ask only that if we are able to help you, that you mark our reply as your answer. THANKS!

    Hello,
    Based on your description, it seems that you want to copy all schema from a "Shared" database into other servers and separate data into the tables based on the company name.
    If I understand correctly, you can try to use the
    SQL Server Import and Export Data Wizard to copy data from table or view to destination server and specify query to restrict data  for copy. Or you can use linked server and
    SELECT INTO statement with condition to move the data.
    As per my understanding about the "Handling routing", balancing capability. In order to meet your requirement, you have to load balance through your application's design.
    Regards,
    Fanny Liu
    If you have any feedback on our support, please click here.
    Fanny Liu
    TechNet Community Support

  • IPhone3 - can I sync onto multiple PCs running iTunes ? or is this a one-one relationship ?

    Can I sync onto multiple PCs running iTunes ? or is this a one-one relationship ?
    My situation - use home computer for music etc., boat computer for weather file downloads,officecomputer for email / pictures ...
    Thank you

    There is an App called Weathertrack, which pulls from the web GRIB files (weather information), that I would like to download onto the laptop we have on the boat, that runs some routing software (SeaTrack), that in turn integrates weather, tide, GPS etc to help with vessel navigation.
    I can obviously do this from my home computer (this is the one that has the 1-1 sync relationship), but I don't want to empty the IPhone content whilst on the boat ...
    If you can think of a way of making this happen, I would be very appreciative. Both PCs are windows based, home is Vista, boat is XP.
    Kind regards

  • Downloading Logic Pro X onto multiple macs

    Will I be able to install (download) Logic Pro X onto multiple macs like I did with Logic 8? (Only one used at a time).

    Yes you can. (Sorry. The other post with the answer popped up as soon as I posted.
    Thx

  • Scan multiple ports on multiple computers

    Hey guys,
    I wrote the following batch script to use along with portqry tool which is availabe from microsoft download center.
    The tool can scan multiple ports on a single computer, but it is not capable of scanning multiple ports on multiple computers in one attempt. Also it gives a big output which is a bit tough if you are trying to prepare a report.
    Here is the batch file which takes input from server.txt where all the computer names present and scans for the below ports on each computer and gives you output in a beautiful way.
    TCP: 135, 445, 1433, 1434, 1024, 1040
    UDP: 1433, 1434
    Copy and paste the below code in a batch file and use it along with portqry.exe.
    echo off
    for /f "tokens=* delims= " %%a in (server.txt) do call :vk %%a
    :vk
    portqry -n %1 -e 1434 -q -p udp
    if errorlevel = 2 goto filtered_1434
    if errorlevel = 1 goto failed_1434
    if errorlevel = 0 goto success_1434
    goto 135
    :filtered_1434
    Echo %1 udp Port 1434 is listening or filtered
    goto 135
    :failed_1434
    Echo %1 udp Port 1434 is not listening
    Goto 135
    :success_1434
    Echo %1 udp Port 1434 is listening
    goto 135
    :135
    portqry -n %1 -e 135 -q -p tcp
    if errorlevel = 2 goto filtered_135
    if errorlevel = 1 goto failed_135
    if errorlevel = 0 goto success_135
    goto 445
    :filtered_135
    Echo %1 tcp Port 135 is listening or filtered
    goto 445
    :failed_135
    Echo %1 tcp Port 135 is not listening
    Goto 445
    :success_135
    Echo %1 tcp Port 135 is listening
    goto 445
    :445
    portqry -n %1 -e 445 -q -p tcp
    if errorlevel = 2 goto filtered_445
    if errorlevel = 1 goto failed_445
    if errorlevel = 0 goto success_445
    goto 1433_tcp
    :filtered_445
    Echo %1 tcp Port 445 is listening or filtered
    goto 1433_tcp
    :failed_445
    Echo %1 tcp Port 445 is not listening
    Goto 1433_tcp
    :success_445
    Echo %1 tcp Port 445 is listening
    goto 1433_tcp
    :1433_tcp
    portqry -n %1 -e 1433 -q -p tcp
    if errorlevel = 2 goto filtered_1433_tcp
    if errorlevel = 1 goto failed_1433_tcp
    if errorlevel = 0 goto success_1433_tcp
    goto 1434_tcp
    :filtered_1433_tcp
    Echo %1 tcp Port 1433 is listening or filtered
    goto 1434_tcp
    :failed_1433_tcp
    Echo %1 tcp Port 1433 is not listening
    Goto 1434_tcp
    :success_1433_tcp
    Echo %1 tcp Port 1433 is listening
    goto 1434_tcp
    :1434_tcp
    portqry -n %1 -e 1434 -q -p tcp
    if errorlevel = 2 goto filtered_1434_tcp
    if errorlevel = 1 goto failed_1434_tcp
    if errorlevel = 0 goto success_1434_tcp
    goto 1024
    :filtered_1434_tcp
    Echo %1 tcp Port 1434 is listening or filtered
    goto 1024
    :failed_1434_tcp
    Echo %1 tcp Port 1434 is not listening
    Goto 1024
    :success_1434_tcp
    Echo %1 tcp Port 1434 is listening
    goto 1024
    :1024
    portqry -n %1 -e 1024 -q -p tcp
    if errorlevel = 2 goto filtered_1024
    if errorlevel = 1 goto failed_1024
    if errorlevel = 0 goto success_1024
    goto 1040
    :filtered_1024
    Echo %1 tcp Port 1024 is listening or filtered
    goto 1040
    :failed_1024
    Echo %1 tcp Port 1024 is not listening
    Goto 1040
    :success_1024
    Echo %1 tcp Port 1024 is listening
    goto 1040
    :1040
    portqry -n %1 -e 1040 -q -p tcp
    if errorlevel = 2 goto filtered_1040
    if errorlevel = 1 goto failed_1040
    if errorlevel = 0 goto success_1040
    goto 1433
    :filtered_1040
    Echo %1 tcp Port 1040 is listening or filtered
    goto 1433
    :failed_1040
    Echo %1 tcp Port 1040 is not listening
    Goto 1433
    :success_1040
    Echo %1 tcp Port 1040 is listening
    goto 1433
    :1433
    portqry -n %1 -e 1433 -q -p udp
    if errorlevel = 2 goto filtered_1433
    if errorlevel = 1 goto failed_1433
    if errorlevel = 0 goto success_1433
    goto end
    :filtered_1433
    Echo %1 udp Port 1433 is listening or filtered
    goto end
    :failed_1433
    Echo %1 udp Port 1433 is not listening
    Goto end
    :success_1433
    Echo %1 udp Port 1433 is listening
    goto end
    :End

    For what it's worth, I wrote a PowerShell script that does something like this a while back.
    http://gallery.technet.microsoft.com/scriptcenter/97119ed6-6fb2-446d-98d8-32d823867131

  • ITunes 9.2 stops adding multiple artwork in multiple selection mode. Help?

    Hi everybody,
    Since 2003 I've been using iTunes and adding multiple artwork in several tracks at once.
    Lets say: I added 10 tracks of a CD to iTunes library, then selected all of them and then right click to choose "Get Info > Multiple Item Information". Then I just dragged and dropped as many artwork pieces as I wanted onto the artwork window, one by one. Clicked OK and voilá.
    Now it will only accept one artwork. Following the procedure I used to do, now it will only take the last artwork I place onto the artwork window.
    Now the only way to get multiple artwork in a CD is adding all the artwork (lets say the 20 pages of the booklet) one by one in "each track" separately!, which is a pain in the neck.
    So now I have to add artwork one by one to each track one at a time.
    Is there a NEW way to add multiple artwork on multiple tracks at once in iTunes 9.2?
    Screen shot: http://grab.by/51UT
    Thank you for your help.

    Hi- you might've already figured this out on your own, but:
    A) add the first artwork picture (what you want for your cover artwork) using "Get Info > Multiple Item Information" - and close the Multiple Item Information window
    B) with the multiple tracks still selected, drag your additional artwork picture items into the artwork panel in the lower left corner of the iTunes window (this is the artwork panel titled "selected item").
    C) your additional artwork will be added to all of the selected items. You can click through the artworks using the left/right arrows above the artwork panel.
    Obviously you can also use this same method to add that same additional artwork to any other tracks, from other albums, etc. simply by selecting them as well.
    Side note, the easiest way to select all tracks from a single album: select the starting track, then use ctrl-shift and select the ending track- all tracks between those two will be selected.
    Aaaaaand you're done! Hope this helps!

  • Sql*loader map multiple files to multiple tables

    Can a single control file map multiple files to multiple different tables? If so, what does the syntax look like? I've tried variations of the following, but haven't hit the jackpot yet.
    Also, I understand that a direct load will automatically turn off most constraint checking. I'd like to turn this back on when I'm done loading all tables. How/when do I do that? I can find multiple references to 'REENABLE DISABLED CONSTRAINTS', but I don't know where to say that.
    TIA.
    LOAD DATA
    INFILE 'first.csv'
    TRUNCATE
    INTO TABLE first_table
    FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
    (a,b,c)
    INFILE 'second.csv'
    TRUNCATE
    INTO TABLE second_table
    FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
    (x,y,z,xx,yy,zz)
    etc.

    Here you go what you want..
    http://www.psoug.org/reference/sqlloader.html
    LOAD DATA
    INFILE 'c:\temp\demo09a.dat'
    INFILE 'c:\temp\demo09b.dat'
    APPEND
    INTO TABLE denver_prj
    WHEN projno = '101' (
    projno position(1:3) CHAR,
    empno position(4:8) INTEGER EXTERNAL,
    projhrs position(9:10) INTEGER EXTERNAL)
    INTO TABLE orlando_prj
    WHEN projno = '202' (
    projno position(1:3) CHAR,
    empno position(4:8) INTEGER EXTERNAL,
    projhrs position(9:10) INTEGER EXTERNAL)
    INTO TABLE misc_prj
    WHEN projno != '101' AND projno != '202' (
    projno position(1:3) CHAR,
    empno position(4:8) INTEGER EXTERNAL,
    projhrs position(9:10) INTEGER EXTERNAL)
    Thanks
    Aravindh

  • RMAN backup multiple database on multiple hosts using recovery catalog

    I would like to know if I create one schema called "rman" is enough for repository for backing up multiple database on multiple machines using recovery catalog.
    Or is there any better way to handle for reporting peposes.
    Quick response is appreciated.
    OS Solairs9.
    Oracle 9i.
    Thanks.
    Srini

    This worked perfectly fine except for putting sbt in single quotes.
    See the reults below.
    You are just great Daljith.
    Thanks and I do appreciate your help.
    Still you did not answe my question.
    How come I see backups from June and May even though they are from
    diffierent catalog database?
    RMAN> allocate channel for maintenance device type 'sbt';
    allocated channel: ORA_MAINT_SBT_TAPE_1
    channel ORA_MAINT_SBT_TAPE_1: sid=9 devtype=SBT_TAPE
    channel ORA_MAINT_SBT_TAPE_1: VERITAS NetBackup for Oracle - Release 5.0GA (200)
    RMAN> crosscheck backup;
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_2_1_624018818 recid=1 stamp=624018818
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_1_1_624018817 recid=2 stamp=624018818
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_3_1_624019733 recid=3 stamp=624019733
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_5_1_624020641 recid=4 stamp=624020642
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_4_1_624020641 recid=5 stamp=624020642
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_6_1_624020677 recid=6 stamp=624020677
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_8_1_624115253 recid=7 stamp=624115253
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_7_1_624115252 recid=8 stamp=624115253
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_9_1_624116161 recid=9 stamp=624116161
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_11_1_624117067 recid=10 stamp=624117068
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_10_1_624117067 recid=11 stamp=624117068
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_13_1_624365687 recid=12 stamp=624365687
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_12_1_624365686 recid=13 stamp=624365687
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_14_1_624366605 recid=14 stamp=624366605
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_16_1_624367501 recid=15 stamp=624367502
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_15_1_624367501 recid=16 stamp=624367502
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_22_1_628264333 recid=17 stamp=628264333
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_21_1_628264333 recid=18 stamp=628264333
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_23_1_628265249 recid=19 stamp=628265249
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=c-2926506834-20070718-00 recid=20 stamp=628266151
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=al_26_1_628266195 recid=21 stamp=628266196
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=al_25_1_628266195 recid=22 stamp=628266196
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=c-2926506834-20070718-01 recid=23 stamp=628266233
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_29_1_628267004 recid=24 stamp=628267004
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_28_1_628267004 recid=25 stamp=628267004
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_30_1_628267919 recid=26 stamp=628267920
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=c-2926506834-20070718-02 recid=27 stamp=628268832
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=al_32_1_628268875 recid=28 stamp=628268876
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=al_33_1_628268875 recid=29 stamp=628268876
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=c-2926506834-20070718-03 recid=30 stamp=628268913
    Crosschecked 30 objects
    RMAN> delete expired backup;
    List of Backup Pieces
    BP Key BS Key Pc# Cp# Status Device Type Piece Name
    11820 11804 1 1 EXPIRED SBT_TAPE bk_2_1_624018818
    11821 11805 1 1 EXPIRED SBT_TAPE bk_1_1_624018817
    11822 11806 1 1 EXPIRED SBT_TAPE bk_3_1_624019733
    11823 11807 1 1 EXPIRED SBT_TAPE al_5_1_624020641
    11824 11808 1 1 EXPIRED SBT_TAPE al_4_1_624020641
    11825 11809 1 1 EXPIRED SBT_TAPE al_6_1_624020677
    11826 11810 1 1 EXPIRED SBT_TAPE bk_8_1_624115253
    11827 11811 1 1 EXPIRED SBT_TAPE bk_7_1_624115252
    11828 11812 1 1 EXPIRED SBT_TAPE bk_9_1_624116161
    11829 11813 1 1 EXPIRED SBT_TAPE al_11_1_624117067
    11830 11814 1 1 EXPIRED SBT_TAPE al_10_1_624117067
    11831 11815 1 1 EXPIRED SBT_TAPE bk_13_1_624365687
    11832 11816 1 1 EXPIRED SBT_TAPE bk_12_1_624365686
    11833 11817 1 1 EXPIRED SBT_TAPE bk_14_1_624366605
    11834 11818 1 1 EXPIRED SBT_TAPE al_16_1_624367501
    11835 11819 1 1 EXPIRED SBT_TAPE al_15_1_624367501
    Do you really want to delete the above objects (enter YES or NO)? y
    deleted backup piece
    backup piece handle=bk_2_1_624018818 recid=1 stamp=624018818
    deleted backup piece
    backup piece handle=bk_1_1_624018817 recid=2 stamp=624018818
    deleted backup piece
    backup piece handle=bk_3_1_624019733 recid=3 stamp=624019733
    deleted backup piece
    backup piece handle=al_5_1_624020641 recid=4 stamp=624020642
    deleted backup piece
    backup piece handle=al_4_1_624020641 recid=5 stamp=624020642
    deleted backup piece
    backup piece handle=al_6_1_624020677 recid=6 stamp=624020677
    deleted backup piece
    backup piece handle=bk_8_1_624115253 recid=7 stamp=624115253
    deleted backup piece
    backup piece handle=bk_7_1_624115252 recid=8 stamp=624115253
    deleted backup piece
    backup piece handle=bk_9_1_624116161 recid=9 stamp=624116161
    deleted backup piece
    backup piece handle=al_11_1_624117067 recid=10 stamp=624117068
    deleted backup piece
    backup piece handle=al_10_1_624117067 recid=11 stamp=624117068
    deleted backup piece
    backup piece handle=bk_13_1_624365687 recid=12 stamp=624365687
    deleted backup piece
    backup piece handle=bk_12_1_624365686 recid=13 stamp=624365687
    deleted backup piece
    backup piece handle=bk_14_1_624366605 recid=14 stamp=624366605
    deleted backup piece
    backup piece handle=al_16_1_624367501 recid=15 stamp=624367502
    deleted backup piece
    backup piece handle=al_15_1_624367501 recid=16 stamp=624367502
    Deleted 16 EXPIRED objects
    RMAN> list backup summary;
    List of Backups
    ===============
    Key TY LV S Device Type Completion Time #Pieces #Copies Tag
    11895 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11896 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11897 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11916 B F A SBT_TAPE 18-JUL-07 1 1
    11926 B A A SBT_TAPE 18-JUL-07 1 1 TAG20070718T142315
    11927 B A A SBT_TAPE 18-JUL-07 1 1 TAG20070718T142315
    11935 B F A SBT_TAPE 18-JUL-07 1 1
    11939 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11940 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11941 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11960 B F A SBT_TAPE 18-JUL-07 1 1
    11970 B A A SBT_TAPE 18-JUL-07 1 1 TAG20070718T150755
    11971 B A A SBT_TAPE 18-JUL-07 1 1 TAG20070718T150755
    11977 B F A SBT_TAPE 18-JUL-07 1 1
    RMAN>
    Message was edited by:
    user539835

  • Import multiple img to multiple frames

    Hi all. What I want to do is import multiple images into
    multiple frames. Geez this is hard to explain.
    OK I am useing a 3D modeling and rendering program called
    Blender to make some small animations. To get the effects I want I
    am rendering the animations as a series of .PNG image files. Then
    importing them to the library and placing them 1 at a time into
    individual frames, this is tedious and time consuming.
    I would like to be able to select more than 1 image then
    place them onto the stage into individual keyframes.
    Also after I would like to select all the frames and align
    the images all at 1 time instead of 1 at a time, is this even
    posible.
    I'm a Flash noobie, I have a pretty good handle on it for
    only a couple of weeks experimenting with it. I just feel there has
    to be a better way of doing what I want, the help and tutorials
    answer most of my ???s.

    Hi BoloMarkXXX,
    You may want to try my "Distribute to keyframes" flash
    commands.
    Detail
    Free
    Download from Adobe Exchange
    After you download and install the extension,
    import all your images to stage, select all, & distribute
    to keyframes.

Maybe you are looking for