Backing up older macs earlier than v10.5.7 on Time Capsule?

Is it possible to back up an older mac earlier than Mac OS X v10.5.7 onto the time capsule? And if so, how?

As in USB to USB and then the mac will recognise it as an external harddrive?
Nope.. USB cannot use a TC as external..TC is now and forevermore a network drive. If you want a USB drive go and buy one.. do it.. do it now.. they are cheap, fast and reliable.. much Cheaper, much Faster and much more Reliable than a TC.
Or can I use an ethernet cable?
Yes,, cable, now and always forevermore.. that was the point of the previous post. The only decent network connection is ethernet. Wireless is a trouble prone, difficult heap of voodoo gremlins. To this day it is many times slower and many times worse than ethernet.

Similar Messages

I have been using time machine to back up my Mac Book Pro 3.1 to my Time Capsule. Now the Time machine hangs up on "calculating time remaining".

I have been using time machine to back up my Mac Book Pro 3.1 to my Time Capsule. Now the Time machine hangs up on "calculating time remaining".
Mac Book Pro - 3.1-15-inch 2.4/2.2GHz), Processor 2.2 GHz Intel Core 2 Duo
Operating system : OS X 10.10.1
Time Machine Version 1.3, Copyright 2007-2014 Apple Inc., Modified Tuesday, September 9, 2014 at 6:03 PM
Time Capsule: 500 GB C 2007
This Time Machine software worked satisfactory until Monday Nov, 10 2014 and I have backups until that time. For several years, the software deleted the oldest back up to save the latest one. This is acceptable to me as I have off site storage that is updated every 3 months. How do I get Time machine working again?

I have spent a couple of days trying to respond to Linc Davis. Finally I figured it out . The following is a copy of data from my console from the initiation of a time machine backup until it gets stuck trying to calculate the time remaining. There is no indication that anything starts saving. I copied about 3 minutes of data. This is probably way too much data, but I do not know what is relevant.
Thanks for the help,
calcool
12/22/14 3:16:54.655 PM com.apple.backupd[551]: Starting manual backup
12/22/14 3:16:55.057 PM com.apple.backupd[551]: Attempting to mount network destination URL: afp://”name”%20”lastname”@Home%20Network%20Time%20Capsule._afpovertcp._tcp.loca l./Time%20Capsule
12/22/14 3:16:57.262 PM mds[33]: (Volume.Normal:2464) volume:0x7fed5ab54000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Time Capsule
12/22/14 3:16:57.565 PM com.apple.backupd[551]: Mounted network destination at mount point: /Volumes/Time Capsule using URL: afp://”name”%20”lastname”@Home%20Network%20Time%20Capsule._afpovertcp._tcp.loca l./Time%20Capsule
12/22/14 3:17:08.000 PM kernel[0]: hfs: mounted Backup of “name” “lastname”’s MacBook Pro on device disk3s2
12/22/14 3:17:09.625 PM com.apple.backupd[551]: Disk image /Volumes/Time Capsule/”name” “lastname”’s MacBook Pro (2).sparsebundle mounted at: /Volumes/Backup of “name” “lastname”’s MacBook Pro
12/22/14 3:17:11.112 PM com.apple.backupd[551]: Backing up to /dev/disk3s2: /Volumes/Backup of “name” “lastname”’s MacBook Pro/Backups.backupdb
12/22/14 3:17:24.931 PM “name”[593]: audit warning: soft /var/audit
12/22/14 3:17:24.944 PM “name”[594]: audit warning: allsoft
12/22/14 3:17:24.958 PM “name”[596]: audit warning: closefile /var/audit/20141222201654.20141222201724
12/22/14 3:17:26.544 PM com.apple.backupd[551]: Event store UUIDs don't match for volume: Macintosh HD
12/22/14 3:17:34.767 PM com.apple.backupd[551]: Deep event scan at path:/ reason:must scan subdirs|new event db|
12/22/14 3:17:34.768 PM com.apple.backupd[551]: Reading cached event database from: /Volumes/Backup of “name” “lastname”’s MacBook Pro/Backups.backupdb/”name” “lastname”’s MacBook Pro (2)/2014-12-22-151726.inProgress/F85FEA51-E137-471A-84DA-A2C00E4ECB42/.1BEF88C6 -20C3-3DDC-AE30-05EAB2AFCC15.eventdb
12/22/14 3:17:38.115 PM com.apple.backupd[551]: Using cached disk scan
12/22/14 3:17:39.114 PM com.apple.backupd[551]: Saved event cache at /Volumes/Backup of “name” “lastname”’s MacBook Pro/Backups.backupdb/”name” “lastname”’s MacBook Pro (2)/2014-12-22-151726.inProgress/5BC46A53-25E8-4C4A-8947-AFB221D1FA0C/.1BEF88C6 -20C3-3DDC-AE30-05EAB2AFCC15.eventdb
12/22/14 3:17:39.355 PM com.apple.backupd[551]: Not using file event preflight for Macintosh HD
12/22/14 3:19:14.782 PM CoreServicesUIAgent[294]: unexpected message <OS_xpc_error: <error: 0x7fff77befc60> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff77beff70> { length = 18, contents = "Connection invalid" }
}>
12/22/14 3:20:15.207 PM locationd[182]: Location icon should now be in state 'Active'
12/22/14 3:20:17.267 PM locationd[182]: Location icon should now be in state 'Inactive'
12/22/14 3:20:17.884 PM locationd[182]: Location icon should now be in state 'Active'
12/22/14 3:20:18.483 PM sandboxd[296]: ([310]) com.apple.metada(310) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
12/22/14 3:20:21.646 PM com.apple.metadata.SpotlightNetHelper[310]: [SLSUGGESTIONS] Location managed failed with error Error Domain=kCLErrorDomain Code=0 "The operation couldn’t be completed. (kCLErrorDomain error 0.)"
12/22/14 3:20:23.892 PM WindowServer[143]: disable_update_timeout: UI updates were forcibly disabled by application "Spotlight" for over 1.00 seconds. Server has re-enabled them.
12/22/14 3:20:26.526 PM WindowServer[143]: common_reenable_update: UI updates were finally reenabled by application "Spotlight" after 3.63 seconds (server forcibly re-enabled them after 1.00 seconds)
12/22/14 3:20:28.298 PM sandboxd[296]: ([310]) com.apple.metada(310) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
12/22/14 3:20:29.094 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[599]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
12/22/14 3:20:30.670 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:30.670 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:32.294 PM com.apple.InputMethodKit.UserDictionary[600]: -[PFUbiquitySwitchboardEntryMetadata setUseLocalStorage:](808): CoreData: Ubiquity: “name”~00000000-0000-1000-8000-001B63947FCF:UserDictionary
Using local storage: 1
12/22/14 3:20:32.317 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:32.769 PM locationd[182]: Location icon should now be in state 'Inactive'
12/22/14 3:20:34.580 PM Console[601]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
12/22/14 3:20:35.540 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
12/22/14 3:20:36.388 PM com.apple.xpc.launchd[1]: (com.apple.auditd[604]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.auditd
12/22/14 3:20:36.693 PM “name”[608]: audit warning: soft /var/audit
12/22/14 3:20:36.718 PM “name”[607]: audit warning: allsoft
12/22/14 3:20:37.045 PM “name”[610]: audit warning: closefile /var/audit/20141222201724.20141222202036
12/22/14 3:20:37.438 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:42.437 PM QuickLookSatellite[611]: CGSConnectionByID: 0 is not a valid connection ID.
12/22/14 3:20:42.437 PM QuickLookSatellite[611]: Invalid Connection ID 0
12/22/14 3:20:42.477 PM QuickLookSatellite[611]: CGSConnectionByID: 0 is not a valid connection ID.
12/22/14 3:20:42.477 PM QuickLookSatellite[611]: CGSConnectionByID: 0 is not a valid connection ID.
12/22/14 3:20:42.612 PM QuickLookSatellite[611]: [QL] No sandbox token for request <QLThumbnailRequest stackshot.log>, it will probably fail
12/22/14 3:20:42.613 PM QuickLookSatellite[611]: [QL] No sandbox token for thumbnail request file:///Library/Logs/stackshot.log, it will probably fail
12/22/14 3:20:42.615 PM QuickLookSatellite[611]: [QL] No sandbox token for request <QLThumbnailRequest stackshot-syms.log>, it will probably fail
12/22/14 3:20:42.615 PM QuickLookSatellite[611]: [QL] No sandbox token for thumbnail request file:///Library/Logs/stackshot-syms.log, it will probably fail

I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?

I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?
What I am ultimately wanting to do is make more room on my computer by backing up all of my files onto the external hard drive and then deleting them off of my computer. However, neededing to be able to retrieve them from the external hard drive later down the road.
From what I have read and am trying to understand, is that I probably shouldn't have used time machine. I need to use the external hard drive like a basic flash drive where I can put things on and get things off without having it automatically update through time machine everytime I connect it to my computer.
Not tech savvy at all and barely understand basics. I need very simple and easy to understand explanations.

sydababy wrote:
and then deleting them off of my computer.
BIG BIG MISTAKE ..... youre making a linchpin deathtrap for your data trying to shove everything on a single fragile HD.
Dont suffer the tragedy other people make, buy another or 2 more HD, theyre cheap as dust.
The number of people who have experienced terror by having a single external HD backup is enormous. One failure that WILL HAPPEN, and kaput,......all gone!
Dont do it, its all about redundancy, redundancy, redundancy.
follow here:
Methodology to protect your data. Backups vs. Archives. Long-term data protection
Deleting them off your computer is fine....having only ONE copy is extremely BAD.
The Tragedy that will be, the tragedy that never should be
Always presume correctly that your data is priceless and takes a very long time to create and often is irreplaceable. Always presume accurately that hard drives are extremely cheap, and you have no excuse not to have multiple redundant copies of your data copied on hard drives and squirreled away several places, lockboxes, safes, fireboxes, offsite and otherwise.
Hard drives aren't prone to failure…hard drives are guaranteed to fail (the very same is true of SSD). Hard drives dont die when aged, hard drives die at any age, and peak in death when young and slowly increase in risk as they age.
Never practice at any time for any reason the false premise and unreal sense of security in thinking your data is safe on any single external hard drive. This is never the case and has proven to be the single most common horrible tragedy of data loss that exists.
Many 100s of millions of hours of lost work and data are lost each year due to this single common false security. This is an unnatural disaster that can avoid by making all data redundant and then redundant again. If you let a $60 additional redundant hard drive and 3 hours of copying stand between you and years of work, then you've made a fundamental mistake countless 1000s of people each year have come to regret.

How to make more than one partition on Airport Time Capsule?

how to make more than one partition on Airport Time Capsule?

Only for the very brave......
Open up the Time Capsule (voids the warranty)
Pull the hard drive
Place the hard drive in a separate enclosure
Connect the enclosure directly to your Mac
Use Disk Utility to partition the hard drive
Reinstall the hard drive back in the Time Capsule
For the rest of us.....
The next best thing might be to set up one or more disk images on the Time Capsule, which will allow you reserve a given amount of space for each disk image.
Open up Macintosh HD > Applications > Utilities > Disk Utility
Click on the New Image tab
Navigate to the Time Capsule
Set up the disk image by naming it and specifying how much space you want to reserve

HT202174 In need to change from appleshare to mac os journaled disk format on my time capsule. How to proceed?

In need to change from appleshare to mac os journaled disk format on my time capsule. How to proceed?

No Time Capsule disk can be formatted other than the automatic system in the TC itself.. You simply select erase and it will reformat the drive.
If you are referring to a USB drive.. plugged into a Time Capsule.. you must plug it into your Mac and use Disk Utility.
However you do need to understand.. appleshare is not a disk format.. it is a partition scheme.. so when you pick the disk you need to change its partition to GUID.. this is nothing to do with Mac OS journaled format.. the two are distinctly different. Also Appleshare works fine for most people.. there really is no need to change.
Anyway here is how to do it.
I have sd card I can use as example. Click on the Partition Layout.. so you can choose something else.. notice it is presently set to Master Boot Record.. but is formatted Mac OS Extended Journaled.
When you change the partition layout Options at the bottom will become active and you can change the setting. Click Options.
Choose whichever. GUID is the current system for boot drives.
None of this is relevant to the internal disk of the Time Capsule.

Connect more than one computer to a time capsule volume?

Hello. I am considering buying an old time capsule (500G, 2nd generation) as a little in-house server to store data that need to be accessible for more than one work station. Is it possible to connect more than one work station to one time capsule?
Thanks

While it is possible to connect more than one computer to the Time Capsule......I would not recommend that you buy the Time Capsule that you are looking at.....unless you know that the owner has replaced the hard drive and power supply.
Most of these models never made it much past a few years of operation, so if this is an "original", you have a hint of what will happen not long after you purchase the product.

HT201250 Do you need to use a new external hard drive or an erased one to back up once you upgrade to OSX Lion? My time capsule fails ever since I upgraded the new program to my old mac.

I have not been able to back up in Time capsule since I upgraded my mac to MAC OSX Lion 10.7.5.
Do I need a new external drive or an erased drive to get it to work with the lion software?

Either new or an erased drive is fine, as long as it is formated Mac OS Extended (Journaled).
By the way: I find that Carbon Copy Cloner is a much simpler and efficient "clone"(backup) solution, especially if you're using an external drive.
http://www.bombich.com/

I keep getting this error message and cannot back up my Mac Book Air to MacBook Air to Time Machine; "Air.sparsebundle" is already in use" how do I correct this?

I keep getting this error message and cannot back up my Mac Book Air to Time Machine; "Air.sparsebundle” is already in use" how do I correct this?

Restart the Time Capsule. Launch AirPort Utility and check for a firmware update.

I am the only person in my family with a mac. If my family purchases the Time Capsule, will they be able to use it to back up their files with their PCs?

Yeah, I have a macbook but everyone else has a windows computer. If we buy this will they be able to back up their files on the Time Capsule wirelessly as well? Also, if I put a backup onto the Time Capsule, will everyone be able to see what is on my back up, or will I just be able to see the back up for my computer?

Also, if I put a backup onto the Time Capsule, will everyone be able to see what is on my back up, or will I just be able to see the back up for my computer?
Only you will see the backup of your Mac.
will they be able to back up their files on the Time Capsule wirelessly as well?
You will need a special Windows application like Genie Timeline Pro to be able to backup the PCs automatically to the Time Capsule. Otherwise, you must manually copy the files over.
Check with the Genie folks on backup details for the PCs before you buy.
Genie Timeline Pro | Overview | Time Machine Backup Software for ...

HT4628 Airport on Mac is searching for Wi-Fi from Time capsule. I can get into my back-up, but internet. Modem is fine( I can get online with Ethernet cable). I was told it is a difference in IP addresses ( outgoing from modem and streaming from capsule).

What might be a problem with IP addresses? I did contact Time Warner Cable about my service, there is no problems at the modem until it gets to Time Capsule. I have everything in the house running off of wireless, now nether asset is working. I was able to connect to Time Capsule wirelessly, but Internet is no go. Any ideas? Thank you!

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule) (Note: Performing this type of reset will NOT affect any data stored on the Time Capsule's internal HDD.)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Using an Older (802.11g) Airport Extreme as bridge with Time Capsule

Several people have inquired about the possibility of having older (802.11g) computers and devices connected through their Time Capsules without disturbing the 802.11n capabilities of their newer equipment.
The latest version of Designing AirPort Networks Using AirPort Utility --
http://manuals.info.apple.com/en/DesigningAirPort_Networks10.5-Windows.pdf -- explains (pp. 48-49) that one can configure a dual-band (2.4 GHz & 5 GHz) network of this type by setting up the "second device [i.e., the older Airport Extreme] as a bridge." What is lacking is a clear (at least to me) way of configuring the 2.4 GHz Extreme as such a bridge, although the text states that one need only follow instructions "earlier in this chapter" (which begins at p. 14). When I try to do this, the AirPort Extreme shows up as a separate network.
Obviously, I am doing something wrong. Can someone walk me through how to configure the AirPort Extreme as a bridge?
Thanks.

The MAC support people walked me through a solution to my question about using an older (802.11g) AirPort Extreme and a Time Capsule to form a dual network. The solution turns out to be pretty easy but I am posting it in case anyone else has a similar problem.
Here's what was involved:
N-capable equipment: MacBook Pro, IMac, Time Capsule.
B/G-capable equipment: AirPort Extreme (flying saucer 802.11g); Mac G4; older (802.11g) AirPort Express supporting a network printer; IBM ThinkPad running Windows XP (w/service pack 2).
Step 1: Using AirPort Utility (manual setup), I set the Time Capsule to run at 5 GHz (click on "Wireless" then "Radio Mode". Under the same "Wireless" tab, I assigned a 13-digit WPA2 password to this network (more about this latter). If you opt to use the 5GHz frequency, you have the choice of WPA2 or nothing. After saving your settings, exit out of the AirPort Utility; you are done with the Time Capsule.
Step 2: Reset the AirPort Extreme to its default settings by depressing the small reset button while the device is plugged in.
Step 3: I reopened AirPort Utility, accessed the Extreme and clicked manual setup. (You will loose your connection to the Time Capsule at this point, but this is okay.) At the top of the screen that opens in response to clicking "manual setup," click "internet" and set "connection sharing" to "Off (Bridge Mode)" Next click "AirPort" at the very top of the screen: under "Base Station" I named the Extreme as "G network" and set up a network password. Under "Wireless" I next set up a WEP 40 bit password which was identical to the WPA2 password I used for the Time Capsule. Using a WEP password was necessary, because some of the older computers were not WPA2 compatible. I kept the passwords identical simply as a matter of convenience.
Step 4: Connect the AirPort Extreme to the Time Capsule using an Ethernet cable between the WAN port of the Extreme, and one of the three LAN ports on the Time Capsule. There is a small, green LED recessed in the LAN port socket; if it lights up, you are in business.
Step 5: Using a pin, I reset the 802.11g AirPort Express to its default settings, opened AirPort Utility (no need for manual setup for this), named the Express "Printer" and added it to the G network in a conventional manner by following the setup prompts. (If anyone needs help with this, let me know). Exit out of AirPort Utility and reopen it to refresh; all wireless devices (3 in my case) should be visible and lighted green.
Step 6: I set up the MacBook Pro and the IMac to join the 5 GHz Time Capsule network, and everything else to run on the G network. At this point, everything appears to be working. I can, for example, print a document from my MacBook Pro (N-network) to the network printer which on the G-network. (Because the older computers belong to my daughters, I'll never know if file sharing across the networks is a possibility.)
I take no credit for any of this; it was all accomplished through the efforts of very patient MAC support people.
Carl

Backing up a share point (external hard drive connected to Time Capsule) using time machine.

I am currently using Mac OS X Lion, and just set up my time capsule with an external hard drive to store itunes, iPhoto libraries, etc. Is it possible to use time machine to backup the external hard drive to the 2 TB internal hard drive in the time capsule?

You cannot backup network drives with Time Machine. It will work only on HFS+ formatted local drives.
Is it possible to use time machine to backup the external hard drive to the 2 TB internal hard drive in the time capsule?
No, Time Machine is specific to backup of a local machine, locally connected disks.
If you unplug the disk and plug it into a Mac.. and if it is HFS+ formatted then you can back it up.
Otherwise you need a software like Carbon Copy Cloner (CCC) but as a warning, it will be very slow. Especially if you do this over wireless.

Can i back up more then one imac in home to 2T time capsule

Can i back up 2 imacs to 2T time capsule. all my music is on the mac in a room away from the time capsule

if my second imac is wireless how do i hook up to time capsule to back it up or share and then confirm that it is saved to time capsule

I have just converted from PC to iMac. Yay. But pls be nice to me; I am back to newb! Running Lion. Have connected a Time Capsule as both a backup and WAP. I want to be able to join the network with my iPad, iPhone, iPod to print. How can I do this?

Can I do this using the Time Capsule. I am not tech, so bear with me. Can I get the iPad to connect wirelessly to the TC, which connects wirelessly to the Canon MP495? Or, can I connect/network the iPad to the iMac to print?
Either way, or if there is any other solution, I would appreciate if someone would walk me through it, or point me to a plain-speaking resource.
Thankyou.
Actually, one more: I would like to connect my HP laptop as well. I have heard this is not simple, but possible.

You can create a wifi network with your TC, and you can join this network with your iPad. However, your printer does not support the AirPrint protocol, so you will not be able to print from your iPad, unless you load additional software.
These are the steps:
1. (You may have completed this step already) Set up your TC to create a wireless network. You can do this from AirPort Utility on your Mac or from the AirPort Utility App on your iPad (free download from the App Store).
2. From your iPad, go to settings / wifi and join the network.
3. Download the Canon iPhone App from the App store on your iPad
4. You can now print photos from your iPad to your Canon printer.
If you want full functionality, (not just photos), there is software for your Mac that makes your printer available to your iPad through AirPrint (Printopia). The downside is, you have to purchase it, and you have to have your Mac running when you want to print from your iPad.
Good luck!

Mac Mini /w Snow Leopard Server and Time Capsule: unavailable on www

Hello all,
Seeking some help with an issue that I cannot resolve and/or do not fully understand.
What I would like to achieve:
Make my newly purchased mac mini server available on the world wide web using my own web address, e.g. blabla.com.
Situation/Details:
I have installed and re-installed my mini server several times as I am doubt the correctness of the settings for the primary dns, currently set for 'blabla.com' and computer name 'miniserver'. The miniserver is connected with a network cable to my timecapsule and has been allocated the IP address 1.0.10.9 - time capsule has IP address '1.0.10.1'.
As the time capsule is connected to the internet - provided through Comcast - the following IP Address has been assigned '60.172.151.254' which seems to be my static external IP address. Furthermore I have a router address '60.172.148.1' for which I am unsure of its purpose.
Problem:
How do I 'link' my server to my www address so I can access deployed services over the internet? I have been reading about 'Port Forwarding', NAT etc but I am lost in what to do. Can someone help me out with this problem I am facing?
Thanks in advance for any comments/suggestions,
Tiest

Thanks DaddyPaycheck for your initial response. Before I jump onto the phone with Comcast couple of questions that I have for clarification purposes:
1) Are you implying that I must link my blabla.com address to that static IP address through my Domain Provider? See following example:
Record Type Record Host Record Answer TTL
A *.blablat.com >>Static IP<< 300
2) The current IP I have been given 60.172.151.254, why is that not static or how do you know it is not static?
3) When executing the command host in terminal for this IP address it returns the following: c-60-172-151-254.hsdl.co.comcast.net which coincidentally is the same as primary DNS it recommended during the initial configuration of the Mini Server. What does this mean? When I enter this in Safari it results in 'Safari can't connect to server'.
4) Executing the same command for my domain name 'blabla.com' it results in my 'internal' IP address '1.0.10.9'.
Thanks in advance for any clarification you can provide,
Tiest.

Backing up older macs earlier than v10.5.7 on Time Capsule?

Similar Messages

Maybe you are looking for