Backing up to two drives at the same time

Is it possible, using Time Machine, to back up at the same time to two external hard drives connected to an Airport Extreme (via a USB hub) ?

If your external drive with the iTunes data is connected to your computer by either USB or Firewire, you can configure Time Machine to backup both your computer and the external drive, you'll have Time Machine backups of both devices.
Post back with some info on how you have things configured now to see if this arrangement might work for you.

Similar Messages

Can I export my sidecar files to two or more hard drives at the same time from one computer?

Can I export my sidecar files to two or more hard drives at the same time from one computer? How do I do this, if it is possible?

Each image is imported into the LR Catalog from just one stated location on disk. And that is where the sidecar gets written.
But if you want, outside of LR, you can have a file sync utility replicate all physical changes within those folders on disk, into other corresponding locations on other drives - which hold a copy of all the same images, and a copy of the sidecars too. This might happen continuously, periodically or on demand depending on the particular tool you use... for example, the Dropbox desktop app.
If you also want to have your LR Catalog replicated, I think this can only be done when LR is not running and using that.

One again, "can I use CC on two computers at the same time?" - in practice.

I know this has been asked before and all those threads are locked. Many asked the question, but I haven't found a satisfying answer yet.
Can I multi task with CC?
I want to have my laptop next to my desktop. And while I render, export or whatever my newly shot documentary on the laptop I want to work with a music video project on my desktop. Then when the render is finished I render the music video and go back to the laptop and continue on the documentary. Or maybe I just work 5 minutes on the desktop music video, then come up with something brilliant for the project on the laptop and switch. Back and forth. Will that kind of activity result in any kind of limitation, usage-wise?
So, working on Premiere on my two computers at the same time.. is it possible? Technically? I know the EULA says "only one person". But will it let one person mutli task?
I need to know this before I buy. sorry for asking this again, please bless me with a clear answer

Hi Jimmy Crim,
Yes in case of Creative cloud subscription you are allowed to install and use the cc apps in any two machines.
Even if you want you care allowed to use these apps together in both the machines.
Thanks
Kapil

HT2736 Can I gift a song to two people at the same time so I only have to go through the process once?

As the subject says can I gift a song to two people at the same time so I only have to go through the process once? For example can I enter two seperate email addresses in the "To" line seperated by a semicolon like I can in Outlook?
Thanks for the help

Is there any way I can be on both of these networks at the same time or is there some other way I can configure this?
Yes, you can reconfigure the Time Capsule (TC) to "Join a wireless network." In this case the wireless network would be the one created by the other wireless Internet router. In this configuration, the TC can still share its internal (and external) hard drive and a printer attached to the USB port. However, note that this would disable the TC as a router and an Ethernet switch so basically it will perform as a wireless client.

Two images at the same time

Hi!
I'm new into FCE and I would like to ask for some help. Can I work with two images at the same time? I mean, Can I superimpose two images to make one? How can I do it?
Maybe this is something easy, but I'm just starting,
thanks in advance for your answers
Message was edited by: angelcotallo

Yes, you can. You can put one clip on top of the other in the timeline. You can make both clips visible by reducing the opposite of the clip or top, or by scaling back the clips so they are smaller. You can reduce the opacity and scale of the clips in the viewer by opening the clips from the timeline into the viewer. You can also scale the images directly in the canvas when it is in Image+Wireframe mode.

Import/Rip using more than one CD/DVD drive at the same time.

I have two DVD/CD dual layer readers/burners and would like to be able to import audio CDs into iTunes from both drives at the same time.
Is this supported?
If so, how do I do it?
If not, is it planned for future releases?
Thanks in advance!
AMD 3500+ - Loaded. Windows XP Pro
AMD 3500+ - Loaded.

String x = "Insert Into(...) Values(...)? Insert Into(....) Values(.....)";
STRING ???
You are kidding are you?
What programming language are you using here?
And what exactly is your requirement?
Running multiple INSERTs in a single transaction?
To do that, just open a connection with autocommit off,
prepare and execute all your INSERT-Statements
(you'll want to use BIND variables and not STRING concatenation for that. Ever heard of SQL injection?),
and finally you commit or rollback your transaction.
Voilá.
regards,
Lars

Singletons running on two servers at the same time

Hello,
          we faced one interesting situation with our application, running on clustered BEA Weblogic 9.2. We implemented some Singletons (ie. Singleton Service in a Weblogic cluster) and they are running fine. Most of the time.
          Common scenarios: cluster is started -> the singletons run on one server; the server is brought down -> the singletons are started on the second server.
          However, we had recently two situations where the Singletons started on both servers! Here they are:
          1) We use Database Migration Basis and we have a dedicated table for Weblogic to capture current state of the singletons. Due to the fact that database (Oracle RAC) was partially available one of the Managed Server could not get the lease and probably assumed that no singleton is running, therefore started the singletons locally.
          2) Network outage: we had several minutes where none of our servers could communicate between them (neither between SASU MS nor with the database). Consequence: each MS decided to start the singleton locally (after some time, which I assume is the waiting time). Once the network came back the servers could communicate again but the duplicate singletons are not deactivate, so they are running in parallel.
          Anyone experienced the same or similar issues? How to prevent the above? Is the Consensus Migration Basis a better choice? (I think yes for #1 but not for situation #2).
          Any helpful answer is appreciated.
          Thank you, best regards,
          Remus.

In general its not a good idea. Running PSConfig will try to establish a lock on the configuration database. Doing that from two servers at the same time may cause the update to fail.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Fix 'itunes was not properly installed' and missing cd drive at the same time.

Hello,
I have a classic problem here. I have been searching all over internet but I can find any solution that can fix both the problem at the same time.
You might know that to fix the error message 'itunes was not properly installed. bra bra bra... if you want to burn cd' then you have to add some value into windows registry which is 'UpperFilters' with value 'GEARAspiWDM', and that fix the error message problem.
But then... after that my computer can not see the cd-rom drive due to error code 19. I googled it and found the solution that say I have to delete the 'UpperFilters' altogether with 'LowerFilters'. OK! that would fix the cd-rom problem but then I would just go back to the strart! I have to torelate with the itunes error message again!
So... My question is 'How can I fix both problems? I want the error message to go away and also want to use my cd-rom drive at the same time. I have tried a clean uninstall and reinstall itunes solution but it didn't work and I also try instal an up to date GEARAspiWDM driver but it didn't work either.
Please help.

OK - upon backing up and seeing the results, I see that it has backed up both the HDD and the external, so i kind of answered the question myself...

Burning two DVDs at the same time

Hi guys,
I've just bought a new MacPro with two super drives.
Do you know how to burn two copies of the project at the same time
using DVD Studio Pro?
Thanks in advance!
gogiangigo
DVD Studio Pro 4.2 Mac OS X (10.4.10)
Mac OS X (10.4.10)

Welcome to the boards
You cannot burn two DVDs at the same time from DVD SP though if you build the project you can tyr other approaches
http://discussions.apple.com/thread.jspa?messageID=4557443

Write a progarm to test two parts at the same time

Hi:
I need to write a program in LabView that is capable of testing two parts at the same time.
Explanation:
I star the test on a unit, once all the electrical test is done move that unit to the pressure test without loosing the current test information and continue the test of the unit thewn generate a serial number only if it passes all the test. Then while the previous unit is going thru the pressure test star testing another unit for the elecrical test and so on.
I am using LabView 2012

From what you have described, I agree with what has been answered above. TestStand is specifically designed for. If you would like to provide more information about your application we could give you a more detailed response. For more information about TestStand follow this link
www.ni.com/teststand
Ryan
Ryan
Applications Engineer
National Instruments

Is there a way to show two angles at the same time in the final edit rather than switch between them with Multicam?

Can I show two angles at the same time in the final edit rather than alternate with Multicam?

Stack two clips on top of each other and reduce the sizes. I think that's what you want.

Can I access two websites at the same time?

Does Dreamweaver have the ability to open two websites at the same time?
I basically have a CMS hosted on one server, that connects to my clients sites on other servers. I want to be able to open files on one server and edit them and also edit files on another server at the same time.
If this isn't available in Dreamweaver, then I think it should be. I often need to copy code from one page in a site to another page in different site. To have the ability to have two windows open, each connected to a different website server would be invaluable to me. By having separate windows, each can have its own server connection. I don't know how easy that would be, but I'd love it!
Cheers
Glynn

You can only connect to one site at a time. And you need to edit files locally, save & then upload to the remote server. AFAIK, no single FTP app is capable of connecting to more than one server at a time. You might be able to do what you want with DW open and an additional 3rd party FTP client like Filezilla, each connecting to different servers.
Nancy O.

How can I open two libraries at the same time on itunes?

Hey i need help on opening two libraries at the same time on itunes. I don't know if that is possible but need some advice if its possible. I already have several libaries but I need to compare labaries at times due to various users on my computer. Please help .

Not that I'm aware of. What exactly is that you want to achieve? There are tools for scanning media folders and adding any files not listed in the library, or deleting those that no longer exist. There are also ways to use one library for multiple users so that any tag update gets applied for everyone.
tt2

How can I start two Vi at the same time?

I have two Vi's, each of these Vi has a stop button. I want to start these two Vis at the same time. I also want to be able to stop the two Vis at the same time. What should I do? Thanks.

One way to start them is with an Invoke Node and the Run method. You can then stop them with the Set Control Value [Variant] method. When you use the Set Control Value [Variant], you just have to specify the name of the front panel control that stops the while loop. Older versions of LabVIEW only had the Set Control Value method in which you had to use the flatten to string function to pass the Type Descriptor and Flattened Data.
Message Edited by Dennis Knutson on 03-20-200609:35 AM
Attachments:
Run Method.JPG ‏44 KB

How to make this two things at the same time ?

Hello
When my mouse is on a area, I need :
- to show a object (a rectangle inserted with the toolbar)
- to show a caption
I think it's not possible to do this two things at the same time when I use the rollover functions (Rollover caption or Rollover Image).
I would like to use a button, but the button works only if I click it, and not when I just pass my mouse on it.
Someone have an Idea?
I can't use Javascript.
Thanks

Rick is correct. You can use the Rollover Slidelet's rollover area to trigger an Advanced Action. You'll need to create this Advanced Action with two clauses. One to SHOW the caption, and the other to SHOW the rectangle.
Your alternative to the rollover slidelet is to use an Event Handler widget attached to the object that the mouse should roll over.
The Event Handler will detect when the mouse is over the object and trigger its own Success criteria. You can then use the widget's ON Success event to trigger the Advanced Action as mentioned above.
More information about using the Event Handler here: http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
An example of using it to do two different things on the same object can be found at this web page: http://www.infosemantics.com.au/adobe-captivate-advanced-elearning-tutorials/beat-adobe-ca ptivate-interactive-catch22
Trial versions of the widget can be downloaded from here: http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets

Backing up to two drives at the same time

Similar Messages

Maybe you are looking for