Backing up/transfer questions

im switching to my new macbook air, how do i back up my bookmarks and add them onto the safari on the new mac air
AND
is there a best way to transfer my whole iphoto library? i understand its a complicated database and want to do it properly
thanks

1. If you are going from one Mac to another, just follow the instructions when you first start the computer, and Migrate. Everything will come over.
2. Do you have an external drive? If yes, and it it the same size as the internal, google Carbon Copy Cloner, and use it to make a bootable clone (this is the primary backup, in my opinion. Anything else is secondary, in safety, and in use). If you have an external twice the size of the internal, try Time Machine. It will prompt you as soon as the external is recognized, to start TM.

Similar Messages

CVP take back and transfer and ANI override

Hello. We're building a contact center with UCCE and CVP 8.5. The call flow requires the call to be trasnferred out to an external 800# number and then transfer back for agent. Some calls will also need to be transferred out to third party companies when the contact center agent couldn't handle the call. Now during all the transfer out and back into the call center we need to preserve the original caller ANI. We plan to use take back and transfer feature from CVP but I have two questions here.
1. If the initial main number coming into the call center is not toll free but DID number, will CVP take back and transfer works with the carrier such as AT&T? I thought that only toll free number can support TNT but not DID.
2. Can CVP override ANI in above scenario as an alternative approach? What needs to be done on carrier or the destination party side for this feature?
Anyone has implemented a TNT or override ANI? Is there a document explaining how to do this?
Thanks a lot.

Couple of thoughs here :
As to whether TNT works with the specific lines you have, you'll need to work out with your telco as already advised, the ANI would probably be retained though given how it works;
More importantly, TNT transfers won't do what you need, a TNT transfer releases the call from CVP's control. It is essentially a blind transfer, telling the ingress gateway to send some DTMF tones to your Service Provider asking them to pull the call back from your gateway. You'd then need 'the other destination' to send the call back to you when they're done and you'd lose call context even if they did ...
What you really need then is a CVP controlled transfer, essentially CVP starts a new outgoing call to where you specify and through the Post Call survey feature or similar you could have the call re-enter your routing script when the remote call center is done;
Probably worth mentioning : you would be billed for the outgoing call as it's originating from your gateway, I suppose special arrangements are possible there with telcos;
I assume your goal is to present the customer's ANI to the 3rd party contact center, CVP will actually do that by default, i.e. the A number is preserved already;
Bigger question will be : will your telco allow you to present the customer's ANI on a call that's coming out of your gateway, they typically configure some kind of CLID override, putting the ANI on your outgoing leg to one of your DID numbers to prevent you from spoofing your ANI, otherwise any prankster could pretend to be you ...
Cheers,
Kris

Hi . please help me to back my security question i have in my account 25$ i dont know if my account are acctive or unacctive please help me

hi . please help me to back my security question i have in my account 25$ i dont know if my account are acctive or unacctive please help me i dont know what i do

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support or Apple to get them reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

I forgot secret questions to enter the account I need to help me put back on the questions and answers them Your brother Mohammed Al-Ghamdi

I forgot secret questions to enter the account But I know the PIN number to my account I need to help me put back on the questions and answers them
Your brother Mohammed Al-Ghamdi

See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
NOTE:
It is not wise to post personal information on a Public forum. I have asked the Hosts to remove your Account Details and Phone Number.

Take back and transfer

Hi All,
work in a call center using UCCE 7.5, have a company as a partner that want to start transfering calls to us using AT&T's Take back and transfer tech, Just wondering if I need any special configuration in my side to recevied this calls
thank you
-X

It is fully supported and I have it working in many UCCE deployments, if you need to transfer any calls via TnT simply use dynamic label and include the *8 string as prefix or whatever the provider is expecting.
HTH,
Chris

Transfer back to tape question / How to do a portion

How do I transfer just a portion of my entire movie in FCE back to tape.
I have about an hour in one sequence and I only want to transfer the last half back to tape... I know how to do the basic print to video but how do I designate a specific segment?
Thanks

Ah I think I get what your asking. There are no buttons in the timeline. Just hit the keyboard 'I' for in and 'o' for out in the timeline and edit points will be placed at the playhead. These points will automatically be reflected in the Canvas as the canvas and timeline are just different visual expressions of each other. I like marking them in the timeline cause I can see where i'm at in relation to everything else. But tis up to you!
M.
(and apologies if I picked you up wrong)

H8-1520T Case question and OS transfer question

Hello all in the forums here.
My first question is this- I have an HP H8-1520T and noticed on the back next to the main system fan there are what look like metal shields that you can take out. I was wondering if this is what they truly are, and if so what the purpose would be. I noticed it was located close to the pump fan pins on the motherboard, so I can only assume it would be to allow for a radiator if one wanted to water cool their system. If this is the case, what size and thickness radiator would fit, because I want to water cool my system but don't want to have to buy a new case if I dont have to.
My second question is this- I recently bought a SanDisk Ultra II SSD for my boot drive. I was wondering how to transfer the OS from my 1TB Seagate Barracuda to the SSD. I have already tried two programs, Paragon's Migrate OS to SSD 4.0 and Seagate's DiscWizard software, both to no prevail. I was wondering how to transfer it.
Thanks

There are many SSD Migration Guides, provided by the SSD manufacturers as well as computer industry magazines.
For "Cloning" your new Solid State Drive (SSD), SanDisk recommends
Apricorn® EZ Gig IV with Data Select.
http://mp3support.sandisk.com/downloads/um/ssd-install-guide.pdf
The SanDisk SSD Conversion Kit comes with Apricorn® EZ Gig IV with Data Select for convenient data-migration, which copies files from your existing hard drive to your new SSD.
http://www.sandisk.com/products/ssd/sata/conversion-kit/
Macrium Reflect is a free migration tool (clone hard drive), used by some SSD installers.
http://www.maximumpc.com/how_clone_hard_drive_or_ssd_2014
Click on the green Download Now button (Cnet.com repository) for Macrium Reflect
http://download.cnet.com/Macrium-Reflect-Free/3000-2242_4-10845728.html?part=dl-&subj=dl&tag...
Samsung uses a Proprietary Migration Product, specific for their SSD products.

Front-end/back-end cluster question

[att1.html]


Patrick Power wrote:
          > Thanx for your reply Prasad. I was surprised none of the Bea engineers
          > wished to touch this one. What do you suppose is up with that? Either
          > they are too busy, or possibly my question is too dumb.
          >
          I am from BEA so its not that we are not responding ;).
          >
          > Back to the issue: Yes, we will NES bridge/proxy into servlet front-end
          > cluster, potentially with Directors on the very front of the topology for
          > balancing. Your diagram as such:
          >
          > <Netscape/IIS/Apache/WLS FRONT END> ----- <CLUSTER OF WEBLOGIC SERVER
          > > SERVING SERVLETS> --- <CLUSTER OF WEBLOGIC SERVERS SERVING EJB>
          >
          > 1) Does <Netscape/IIS/Apache/WLS FRONT END> mean NES with proxy shared lib,
          > with a WLS service definition into cluster in obj.conf? I assume yes.
          Yes.
          >
          > 2) I would assume that <CLUSTER OF WEBLOGIC SERVERS SERVING SERVLETS> would
          > need the WLS HttpClusterServlet to the <CLUSTER OF WEBLOGIC SERVERS SERVING
          > EJB> all the way in the back.
          No. I was splitting presentation logic (namely servlets and jsp) and business
          logic (ejb) into two layers. Again you don't have to split it into two. You can
          colocate them both together. You could use NES or IIS or Apache or WLS. You
          don't need HttpClusterServlet.
          Lets get this straight.
          1. You need our proxy plugin for failover and to load balance the request that
          are going to presentation logic.
          2. From presentation logic layer, when you talk to backend business logic
          providers (like ejb cluster), if you use stateless session beans we provide
          failover and load balancing. In future we will support clustered stateful
          session beans as well. Therefore you don't need load balancer here.
          3. HttpClusterServlet should run only in front of presentation logic cluster and
          also it supports http only.
          Hope this helps.
          - Prasad
          > The NES proxy would only proxy into the f/e
          > cluster, right? You're not suggesting an external proxy of some type, are
          > you? The HttpClusterServlet is for WLS cluster-to-cluster proxies.
          > 3) A load balancer between the wls f/e and wls b/e clusters? That doesn't
          > seem applicable here. Once again, it should be HttpClusterServlet for WLS
          > cluster-to-cluster proxies.
          > 4) "use two or three proxy servers to avoid single point of failure."
          > Hmmm, once again - are we talking the WLS HttpClusterServlet proxy? Well,
          > that's the inital question: Can I have more than one HttpClusterServlet
          > proxy in the front-end cluster, proxying to the back-end cluster?
          > Otherwise, internally from this WLS architecture perspective, it is a single
          > point of failure.
          >
          > An example: 10 instances in f/e cluster. can more than one of these
          > instances have the WLS HttpClusterServlet proxy to the b/e cluster? Or, are
          > there instances of WLS HttpClusterServlet proxy in all 10 f/e cluster
          > instances?
          >
          > Cheers, Pat
          >
          > Prasad Peddada <[email protected]> wrote in message
          > news:[email protected]...
          > >
          > >
          > > Patrick Power wrote:
          > >
          > > > I know that this topic was addressed to some degree here in an earlier
          > > > posting, but I still have a question regarding the architecture
          > > > design:
          > > >
          > > > If configuring a front-end cluster for servlets/sessions and a
          > > > back-end cluster for remote services -- you route requests to the
          > > > back-end using the WLS proxy servlet. ok, got that part.
          > >
          > > Not quite. The typical scenario is
          > >
          > > <Netscape/IIS/Apache/WLS FRONT END> ----- <CLUSTER OF WEBLOGIC SERVER
          > > SERVING SERVLETS> --- <CLUSTER OF WEBLOGIC SERVERS SERVING EJB>
          > >
          > > You don't proxy and serve servlets from the same server.
          > >
          > > >
          > > > The question: Is there a single instance of the wls proxy servlet in
          > > > the front-end cluster? Or, is it on every instance in the front-end
          > > > cluster? What is the failover mechanism, in the case of a single
          > > > instance of proxy servlet in the f-e cluster failing?
          > >
          > > To prevent that you need to use some kind of h/w or software load
          > > balancer and then use two or three proxy servers to avoid single point
          > > of failure.
          > >
          > > > Is it a single point of failure between the 2 clusters?
          > > >
          > > > Thanx in advance for your help.
          > > >
          > > > BTW, I think Wei, Kumar and the other Bea folks cruising this group
          > > > have been doing a bang-up job of providing badly-needed detail on this
          > > > subject area - material this largely absent from the documentation.
          > > > Good job.
          > > >
          > > >
          > >
          > > --
          > > Cheers
          > >
          > > - Prasad
          > >
          > >

Video transfer question for older mac 10.5.8

I am trying to figure out how to transfer video from my JVC GR-D770U video camera to my PowerPC G5 running 10.5.8. I have the proper firewire cable but have been unable to find answer for my question on the internet that is specific to my situation.

docone wrote:
I am trying to figure out how to transfer video from my JVC GR-D770U video camera to my PowerPC G5 running 10.5.8. I have the proper firewire cable but have been unable to find answer for my question on the internet that is specific to my situation.
... I dont have iMovie and cant find a version that works with my older OS.
The camera videos are on a Digital Video Cassette tape, not a card.
Use iMovie with your Firewire (IEEE 1394) connected mini DV camcorder.
iMovie 6 HD is part of iLife '06, works great with older miniDV camcorders,
and is compatible with your Mac OS X 10.5.8. You will need to install
iMovie '06 before you can use the downloadable latest update from the link.
If you cannot find it locally, this old version is available on-line, including Amazon.com.
Message was edited by: EZ Jim
Mac OSX 10.9.3

OS5, Calendar will not sync and back-up/restore question

Wife downloaded iTunes 10.5 for the MBP and OS5 for the iPad yesterday. Everything seems ok with the exception of, the Calendar will not sync to iCal. I now have 2 issues.
I attempted to sync it twice so I am assuming the data on the back-up is now what I could not get to iCal in the first place. The back-up now only shows the last one.
I do not use Time Machine nor Mobile Me but do have a cloned bootable hd from the day before. It has all of the iCal data on it, however OS5 now requires iTunes 10.5, so it does not recognize the iPad.
Can I go backwards to OS4 on the iPad somehow???
Daryl

going to "transfer purchases' does work - however the thermometer bar at the bottom reflecting apps, music, video, book, etc cpapcity fraks out, sliding left to right maybe 4 or 5 times during the process. Have you ever seen this?
After it is finished, the SYNC button is not longer darkened - so I thought it was safe to attampt an upgrade to OS05... which i am doing now... takes maybe 20 mins and then I normally get the error "the applications on this ipad cannot be verified" and the bottom thermometer bar zeros out all by my music. The content and apps are all fine on teh ipad. so strange. I made an appointment with customer service tomrrow AM - but i do not think i should have to pay for this - i have never even used support before!
I will update if it works - or re[eats the strange pattern again and does not update.
Thanks for your time and help!

Log and transfer question

OK I was wondering if when I import AVCHD from my hard drive if the original files would be damaged at or removed at all. I just had a slight issue, and was wondering if that would be a problem. Any advice is appreciated. Thanks!

my apologies. I have a 750 gb. usb harddrive that I use for storage, and a Sony Handycam hdr-cx7. I thought that maybe I could drag all of the contents from my memory stick into a folder and import them as needed using log and transfer. What made me ask the question was basically what is the transfer part. I'm sorry if I'm wasting your time. Anyway, I did that with some test AVCHD video and it came out OK, but tonight when I went to import it again, because I didn't save my work (I was just messing around) it gave me a message that says, ""08:5:29" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media." This may be my procedure problem, but it is nice to have the storage option. Thanks again.
Message was edited by: movie_man

Cycle back to unanswered questions

I am using Captivate 4. I have created a quiz consisting of a few random question slides that take questions out of the same pool of even more questions. I have allowed users to skip questions till the end of the quiz. When they reach the end, I would like the quiz to cycle back to the first unanswered question without the result slide appearing, of course. Then, again, at the end of the quiz, cycle back again until all question are answered, then we can see the results page. I tried using advanced actions and particularly the cpQuizInfoTotalUnansweredQuestions system variable which I added to a "On slide enter" function of a blank slide before the results page so it can check if all questions have been answered, then proceed to the next slide which is the results page, a thing that for some reason it doesn't do. On the other side, if not all questions have been answered how can I track the first unanswered question in the quiz so I can send the playback there? Someone should have come across this scenario, I hope.
Also, I would like to ask of there is a way to customize the review questions proccess and instead of showing each question one at a time, to list all questions at once with the correct answer and the answer the user chose.
Thanks in advance.

This is why I put the bank slides set at a half-second each between each question slide. You can set an advanced action upon entrance of these slides. So my advanced action looks at the variable for the next slide and checks to see if the value is > 0. If it is, it jumps to the following slide (which is another blank slide and that one executes another version of the same command. In terms of the Submit button, what I meant to say is that I set the same (separate) advanced action no matter if the user gets the question right or wrong. This one changes the value of the variable associated with the slide from 0 to 1 and then advances to the next slide.
So in a 3-question quiz, it would look like this...
Blank -> Slide 1 -> Blank -> Slide 2 ->
Slide 2 as the second-to-last question would have it own advanced action upon exit that looks to see if either slide has a value > 0. If both are > 0, it jumps to the final question. If either has a value of 0, it jumps to slide that tells the user he or she has unanswered questions and gives them the opportunity to go back.
Once the user goes back, the blank slides SHOULD cycle past all completed slides (since they have a value > 0) and stop only on the uncompleted slides.
I am still working out the final details. And once I get them working this way, I would like to see if I could do it with a more elegant plan, using fewer variables and actions. But the basics are working for me right now.

Ethernet connection from iMac to pc transfer question

I'm going to be getting an iMac shortly.
I currently have a Windows PC.
I'm sure I read somewhere that its possible to connect a Mac and a Windows PC together with an Ethernet cable.
What I'm wanting to do is, rather than transfer my music, photos, documents and other stuff to an external hard drive (plus the time it would take to copy the stuff to the external hard drive) and then copy the stuff onto my iMac, I was wondering if there is a way of been able to connect the iMac and the PC together with an Ethernet cable and have both the machines switched on and basically use the Mac to access the hard drive on the Windows PC to then copy the desired information over to the iMac.
I know there is a Migration Assistant application, but I would rather just copy the stuff over that I'm wanting, then at least I know what's been copied over.
If its possible to connect a Mac and a Windows PC together with an Ethernet cable and from there access the information on the Windows PC's hard drive and copy it over to the Mac. If its possible, could someone provide me with the instructions on how to do this please?
Thanks in advance.

tal1971 wrote:
Thanks for the help everyone, really appreciate the help
I already have an external hard drive that would hold everything. Its just I thought it would take a while to copy the stuff over from my Windows PC onto the EHD, then copy the stuff back off of it to my iMac, and thought if I could have linked the iMac and the PC together, the copying would only need to be done once.
I had an idea yesterday. I have a 3.5 inch hard drive caddy/enclosure. My Windows PC is very easy to get into has its got a full side access panel which removes with two thumb screws. I thought I could remove the drive from my Windows PC, place it in the caddy/enclosure and then connect the caddy/enclosure to my iMac, I could then simply access the information and copy it over to my iMac. This would allow me to copy only the required stuff, I would only be copying stuff over once (rather than twice if I were to copy from my PC to a EHD and then to my iMac). The drive would be in the NTFS format (as its been used on a Windows system) but from my understanding Mac can read drives formatted in this, it just cannot write to it without third party software. Would the removing drive, placing it in a caddy/enclousure idea work OK?
Yes that is a great idea, I'd recommend going that route!

ITunes library transfer question

Everyone,
I create a Libary on my MacBook Air it has 2000 songs. I want to move this to my Mac Book Pro machine and then Sync it with a new purchased iPod Touch. Can this be done and how. Do I just copy the iTunes Media folder?
I tested this and it copied to my Mac Book Pro by coping the iTunes Media folder at the file level to the Music ITunes folder on my Mac Book Pro held down the option key and selected the library. It opened fine on my Mac Book Pro just fine. Then I decided to test coping it to a device. I have a very old iPod I choose some songs and sync it. Worked fine can listen to the music on the iPod but when I go to iTunes all the music from the iPod is grayed out. I can play it from iTunes. WHY?
Steps that I want to do
1. I create my iTunes library the way I want it on my MacBook Air.
2. I copy it (is there a special way) to my MacBook Pro open iTunes holding down the option key choose this library and it should work where I can play music in iTunes.
My exact question is this.
If I purchase a 32GB iPod Touch can I plug it into my Macbook Pro and Sync it and it will copy the music over will the music from my library play and work on both in iTunes and on the newly pruchase iPod Touch.
I am trying to fine this out before purchasing the iPod Touch.
Are they coming out with new modeled iPod Touches in Oct? Should I wait is my question.

click here http://lifehacker.com/242468/geek-to-live--how-to-move-an-itunes-library-from-a- pc-to-mac-and-back
and here http://www.myfirstmac.com/index.php/mac/articles/how-do-i-move-my-itunes-library -from-pc-to-mac-and-keep-my-settings-intact/
and here http://support.apple.com/kb/HT2518

KANBAN Stock Transfer Question.

Hi All,
I am using kanban stock transfer stratergy(Mvmt type -311) to transfer my stock from one Sloc to another Sloc. I have given one fixed quantity and everytime that quantity is tranferred between sloc's. Now, My question is can give a tolerance limit to that kanban Quantity.
For example, If my kanban quantity is 500 Pc's can I provide a tolerance limit of 10% so that I can transfer the stock anywhere between 450 and 550. Please let me know if this functionality is possible.
Thanks in advance,
Sushil

Hi,
As per standard SAP Practice , there is no provision of adding tolerance to Kanban Qty but you can replenish 450 /550 by manually editing the Kanban quantity in Kanban Correction.You can do Kanban correction in PK31n or directly by right click & selecting Kanban correction in Kanban Board screen.
Other way is you can use Event driven Kanban for one time replenishment of 450/550 so that you need not disturb the main Control cycle of Classical Kanban.
Even as per my knowledge, there is no BADI for Kanban which can help your requirement.So pls try above.
Hope this helps.
Revert if still any doubt.
Regards,
Tejas

Backing up/transfer questions

Similar Messages

Maybe you are looking for