Backlight alternating bright and dark spots

Just a few days ago my backlight started acting weird and now I have these dark and bright spots at the bottom of the screen. I went into system preferences and turned my auto adjust brightness off thinking that might be the problem, however, the screen still has the same problem.. I have attached a picture of what my screen looks like.. I am operating on system 10.7.5

You have to take the computer to the Apple store to have it checked out.
Best.

Similar Messages

My Display is getting brighter and darker during use

Hi everybody,
my display is getting brighter and darker while using the computer. Do you know if this is a problem pple knows about?
Thank you for your help
Ulli805 (Germany)

Welcome to Apple Support Communities
The Mac sets up the brightness automatically. Go to System Preferences > Display and deactivate Automatically adjust brightness

Alternating light and dark blue screen on trying to start up

Today, on trying to restart after an Intego VirusBarrier update, I got stuck with just a blank blue screen alternating light and dark. I still can't restart on my internal drive, but after starting up from the install disc have managed to restart from a cloned OS 10.5.5 on my external drive. When I try to restart from the internal drive I just get the alternating shades of blue screen and nothing else - no error message, no question mark, just the pulsating blue screen - HELP!!!!

Thanks but that wasn't it. I replaced the battery and reset the PMU, still no luck. I've tried hooking up an external monitor still nothing, in doing all of this the person helping and I noticed that when you push the button on front to power up it doesn't light but I'm also not getting a start up chime, only the click of the hard drive then in pushing the button to power it off the light will blink and I think it is shutting down. Any other suggestions.
Thanks

Bright and Darker Commands.

Hello
I have a problem with my brighter() and darker commands.
In my program I have a paint like idea and I have 2 buttons at the top that have "+" and "-" on them just under the selected colour but my idea was to make the colour brighter and darker depending on how many times you clicked it but it is not working. plz someone help me.
here is my program so far. By the way this is not commented or nearly done just hung up on this brighter and darker commands.
// The "Mouse" class.
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
public class Mouse extends Applet implements MouseListener, MouseMotionListener
Graphics g;
int x, y, x1, y1, check;
Label tools;
Button [] b = new Button [13];
Button pencil, rect, circle, fillrect, fillcircle, spray, light, dark;
Button backdrop;
String col;
Panel Box, display;
Graphics bg;
public void init ()
check = 0;
setLayout (null);
setBackground (Color.gray);
Box = new Panel ();
Box.setSize (460, 400);
Box.setLocation (20, 80);
Box.setBackground (Color.white);
add (Box);
g = Box.getGraphics ();
Box.addMouseMotionListener (this);
Box.addMouseListener (this);
display = new Panel ();
display.setSize (30, 30);
display.setLocation (5, 5);
display.setBackground (Color.black);
add (display);
for (int i = 0 ; i < 13 ; i++) // Array of Colour Buttons
b = new Button (" ");
b [i].setSize (20, 20);
b [i].setLocation (40 + i * 20, 10);
add (b [i]);
pencil = new Button ("" + (char) 183);
bg = pencil.getGraphics ();
pencil.setSize (20, 20);
pencil.setLocation (315, 25);
add (pencil);
rect = new Button ("" + (char) 55555);
rect.setSize (20, 20);
rect.setLocation (335, 25);
add (rect);
circle = new Button ("O");
circle.setSize (20, 20);
circle.setLocation (375, 25);
add (circle);
fillrect = new Button ("" + (char) 55555);
fillrect.setSize (20, 20);
fillrect.setLocation (355, 25);
add (fillrect);
fillcircle = new Button ("" + (char) 216);
fillcircle.setSize (20, 20);
fillcircle.setLocation (395, 25);
add (fillcircle);
spray = new Button ("*");
spray.setSize (20, 20);
spray.setLocation (415, 25);
add (spray);
light = new Button ("+");
light.setSize (15, 15);
light.setLocation (5, 36);
add (light);
dark = new Button ("-");
dark.setSize (15, 15);
dark.setLocation (20, 36);
add (dark);
backdrop = new Button (" Set Backround ");
backdrop.setSize (100, 20);
backdrop.setLocation (45, 55);
add (backdrop);
tools = new Label (" Tools ");
tools.setSize (35, 20);
tools.setLocation (310, 5);
add (tools);
b [0].setBackground (Color.black);
b [1].setBackground (Color.red);
b [2].setBackground (Color.blue);
b [3].setBackground (Color.green);
b [4].setBackground (Color.yellow);
b [5].setBackground (Color.pink);
b [6].setBackground (Color.orange);
b [7].setBackground (Color.white);
b [8].setBackground (Color.cyan);
b [9].setBackground (Color.gray);
b [10].setBackground (Color.lightGray);
b [11].setBackground (Color.magenta);
b [12].setBackground (Color.darkGray);
public boolean action (Event e, Object o)
if (e.target == b [0])
g.setColor (Color.black);
display.setBackground (Color.black);
if (e.target == b [1])
g.setColor (Color.red);
display.setBackground (Color.red);
if (e.target == b [2])
g.setColor (Color.blue);
display.setBackground (Color.blue);
if (e.target == b [3])
g.setColor (Color.green);
display.setBackground (Color.green);
if (e.target == b [4])
g.setColor (Color.yellow);
display.setBackground (Color.yellow);
if (e.target == b [5])
g.setColor (Color.pink);
display.setBackground (Color.pink);
if (e.target == b [6])
g.setColor (Color.orange);
display.setBackground (Color.orange);
if (e.target == b [7])
g.setColor (Color.white);
display.setBackground (Color.white);
if (e.target == b [8])
g.setColor (Color.cyan);
display.setBackground (Color.cyan);
if (e.target == b [9])
g.setColor (Color.gray);
display.setBackground (Color.gray);
if (e.target == b [10])
g.setColor (Color.lightGray);
display.setBackground (Color.lightGray);
if (e.target == b [11])
g.setColor (Color.magenta);
display.setBackground (Color.magenta);
if (e.target == b [12])
g.setColor (Color.darkGray);
display.setBackground (Color.darkGray);
if (e.target == pencil)
check = 1;
if (e.target == rect)
check = 2;
if (e.target == fillrect)
check = 3;
if (e.target == circle)
check = 4;
if (e.target == fillcircle)
check = 5;
if (e.target == light)
g.getColor ();
if (e.target == backdrop)
g.fillRect (0, 0, 460, 400);
return true;
public void mouseMoved (MouseEvent e)
public void mouseDragged (MouseEvent e)
if (check == 1)
g.drawLine (e.getX (), e.getY (), x, y);
x = e.getX ();
y = e.getY ();
public void mouseClicked (MouseEvent e)
public void mousePressed (MouseEvent e)
if (check == 1)
x = e.getX ();
y = e.getY ();
if (check == 2)
x1 = e.getX ();
y1 = e.getY ();
g.fillOval (x1, y1, 1, 1);
if (check == 3)
x1 = e.getX ();
y1 = e.getY ();
g.fillOval (x1, y1, 1, 1);
if (check == 4)
x1 = e.getX ();
y1 = e.getY ();
if (check == 5)
x1 = e.getX ();
y1 = e.getY ();
public void mouseReleased (MouseEvent e)
if (check == 2)
g.drawRect (x1, y1, e.getX () - x1, e.getY () - y1);
if (check == 3)
g.fillRect (x1, y1, e.getX () - x1, e.getY () - y1);
if (check == 4)
g.drawOval (x1, y1, e.getX () - x1, e.getY () - y1);
if (check == 5)
g.fillOval (x1, y1, e.getX () - x1, e.getY () - y1);
public void mouseEntered (MouseEvent e)
public void mouseExited (MouseEvent e)

Hi and welcome,
there is a Energymanagement S205 EM 6.0.16 , newer than factory pre-installed available , try this one ...
by the way did you know that you can choose german section of lenovo community
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

HT1320 Help! My ipod classic is frozen. Even when I attach it to a power source and try to reset it (as per the instructions above), the apple logo never appears. The only thing that happens is that the screen turns alternately light and dark. Thanks!

Help! My ipod classic is frozen. Even when I attach it to a power source and try to reset it (as per the instructions above), the apple logo never appears. The only thing that happens is that the screen turns alternately light and dark. Thanks!

If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

Ipod touch 4g screen gets brighter and darker and it just does randomly

screen gets brighter and darker randomly

Go to Settings>General Wallpaper and Brightness and turn off Auto Brightness.
Next:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

MBP 2010 screen got blue line and dark spots

hey guys my MBP 2010 its got a blue line of pixels down one side its a thin line and all along the dock there is darks spots like the leds aren't all working properly its like light dark light dark light dark is it the lcd or what the issue what can i do to fix it

It sounds like you may have a GPU, display or display connection problem. A visit to an Apple store genius bar for a definitive evaluation is your best option.
Ciao.

Ipod with "apple" on it alternates between bright and dark - can't reset?

I have a 5th generation ipod (30gig) and I just downloaded the most recent (March 23rd) software update.
The screen (with the apple logo in the middle) goes from "light" to "dark" and when it goes to dark the ipod sounds like it wants to close down but it doesn't. It just continues in this bright/dark sequence.
I've tried resetting to no avail.
Can anyone suggest how I deal with this
Thanks

The previous owner/user must do this.
iCloud: Activation Lock
http://support.apple.com/kb/PH13695
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/TS4515
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
 Cheers, Tom

Update 10.5.2, isplay lighting becomes brighter and darkwhen using keyboard

Hello
I make the new update 10.5.2. When I use the keyboard to write something the display lighting becomes brighter and darker. It makes no fun to work like this.
Is there a posibility to turn this off, or is it a mistake of the new update?
Greats by

Hello
this is caused by the two sensors of the backlicgt of the keybord, not from the keyboard. I turn of the backlight of the keyboard in the system preferences, but it don`t stopp.
Why the sensors control the backligt oft the display???
Greats by rettho

IPhone 4: display has dark spot, brightness is not uniform

Hi!
I'm Hector from Italy.
My new iPhone 4 just arrived from the Apple Online Store. It works fine but the top left of the screen has a darker spot; such non-uniform brightness becomes very evident when opening, for instance, Safari (that has a white background).
Should I send it back to Apple?
Or is this a known software issue?
If I go to Milan's Apple Store will they swap it? I would rather not stay without iPhone since all the phones I have at home have a standard SIM and not the microsim.
(without considering that after spending 800€ I really hoped to get a quality product)
Thank you!

Hi and welcome to Apple Discussions....
If I go to Milan's Apple Store will they swap it?
This being a user to user forum we can't say what the policy would be at a particular store but if it were me, I'd take the iPhone and ask for an exchange. Make sure and take proof of purchase with you.
You can provide feedback for "top left of the screen has a darker spot; such non-uniform brightness becomes very evident when opening, for instance, Safari (that has a white background)." here.
http://www.apple.com/feedback/iphone.html
And check out the Apple store / Milan website.
(without considering that after spending 800€ I really hoped to get a quality product)
Absolutely.

Viewer highlights Dark and light spots...

I probably hit a combination of keys that activates my viewer to highlight the dark and light spots with a bright blue, magenta, green... and other colors. I remember FCP 7 to do this if zebra stripes were activated. I have look everywere to turn this off but I can't find it. Please help.

I did change the calibration in syspref/display/calibration and yes, this was causing the effect in Final Cut Pro X althouhg did not affect any other appp sucha s photoshop, quicktime, preview, etc. Is this a bug in FCPX?
Thanks for your response.

Dark Spots on rMBP=Backlight Bleed?

Recently just purchased a Retina Macbook Pro refurb from the Apple store. Screen is a Samsung and perfect in all other respects: no dead pixels, no mura etc. The only issue I notice is when I turn the screen to an extreme angle, I see these darker spots on a white screen:
Should I be concerned or have others seen this issue as well? I really don't want to go through screen after screen.

Actually let me clear up a mistake I've made...
What I meant to say was that Apple were unable to *replace* the screen at this late juncture in time but *they can* in fact repair it. What I meant to say was that I asked Apple if a replacement would be possible but they said that the reseller would need to be contacted as they had final word on this. In the end the reseller declined and said that a repair was the only option. Sorry for the mixup there.
Anyway, I think I'll go with Apple rather than my reseller to get the replacement done. One can only assume that the Genius bar service centre is top notch when it comes to repairs? Would be interested to know if anybody here on the forums has had their iMac screens replaced by Apple due to backlight bleed (or even a different issue) and how it ended up working out for them?
Thanks.

Hi, I'd like to put a black and white effect on my colour footage which will look really sharp but which also looks bright so the whites look bright and the blacks look very dark . Any tips of which best effects to use to achieve this look in Prem Pro. Th

Hi, I'd like to put a black and white effect on my colour footage which will look really sharp but which also looks bright so the whites look bright and the blacks look very dark . Any tips of which best effects to use to achieve this look in Prem Pro. Thanks

Under the Effects-Lumetri Looks-Desaturation choose a B and W effect. Then add the luma corrector from the Video effects-colour correction section. Adjust the brightness and contrast to get the effect you want.

Do I have to live with dark/dead pixels with my new 15" MBP? Yesterday I bought one and have one dark spot in the middle of the screen.

Hello
Yesterday I bought a 15" MBP and found a dark spot in the middle of its screen right away while in the 1st-time-welcome-boot. What a welcome. Do I have to live with it? It is exactly one pixel missing its yellow subpixel. It would be ok if it would be in some corner - but its right in the middle of the screen. Suggestions/experiences in this matter anyone?

Thanks for your suggestions - took it back - got a new, mint, shiny one

Why does auto brightness has a bug in iOS 7.1.1 . The brightness switches automatically to higher in bright places but not returns to lower brightness in dark places but when you lock and unlock it becomes normal

Why does auto brightness has a bug in iOS 7.1.1 . The brightness switches automatically to higher in bright places but not returns to lower brightness in dark places but when you lock and unlock it becomes normal

Hello,
Same problem for me. Really a pain in the *** this bug ! Does Apple fixed it. I'm really suprised noone reports this problem and apple does not adress this.
Because of that, I cannot give it anymore to children because it hurts the view. Really a shame on the part of apple !
Regards

Backlight alternating bright and dark spots

Similar Messages

Maybe you are looking for