Backlight Auto Turn Off

When playing music my backlight of the iTouch does not shut off unless I manually press the black button on top...any way to make it auto turn off like my ipod?

Actually...you should Read My Reply’s correctly
I never said PassCode-Lock...actually no one has brought up PassCode-Lock…you’re the first.
My point was even sliding the bar is an extra step I would rather not do while driving, but of course I want the backlight to turn itself off in 1 min…but it seems like the AutoLock MUST be on to have the backlight auto turn off...and that the backlight does NOT work independently from AutoLock…it seems there is a NO backlight setting that controls NOTHING but the backlight, unlike a regular ipod.
I was just asking to be sure I did not overlook something.

Similar Messages

  • Today I get issues with thte device. When I in a phone call, the screen don't auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently.

    today I get issues with my z10 device. When I in a phone call, the screen don’t auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently. can anyone help me with this?

    Same issue already several weeks.
    And we are not alone:
    http://forums.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/i...
    At all there is, I think, 4 threads in parallel about this issue at CB forums. One of the:
    ms.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/index5.html
    I already contacted BB Help at Twitter. Answer:
    Thanks for the information. It seems that you have installed an OS version higher than the one supported by your carrier on your device. Please contact your carrier to get the supported OS version and try the proximity and light sensors. Let us know if you need further assistance. Cheers. ^LFC.
    I did replay:
    You are confused me. Phone got updates over network automatically. On crackberry forum a lot of people from different countries and with Different OS version, but with the same problem. Hi, this is thread at CrackBerry: http://forums.crackberry.com/blackberry-z10-f254/proximity-sensor-906493/index3.html
    This my replay was 22 of march. No more answer from BB.
    I can't contact my operator - 3UK, because I bought my from on Amazon from Amazon. This phone not from operator - seller is Amazon.
    What I already done:
    For last week, I read, how to install OS using Sachesi and Autoloader. I used Sachesi to load 3 UK version, I installed autoloader from this links:
    http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
    This
    For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925
    Doesn't help
    And this:
    For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS
    No result.
    After install all of them phone wants to update to 10.2.1.2102 by air.
    BBVE in all versions sais: Can not obtain data from sensors.
    Dear BB support, please, can you explain, how to resolve this issue?

  • N8 backlight wont turn off and cant change default...

    hi guys
    ---i got little problem here. my display backlight turns off only when I lock the phone-with button,or automaticly. I think it is suppose to turn off after the time that i can set in settings-> phone->display-light time out(5sec to 60 sec). its not a huge problem,i can always just use the button,or set screen/key lock time to minimal limit (60sec), but anyway,its **bleep** me of...fyi-> no app is runnung in background
    --- than,I cant really change my default browser. of course i changed my default browser in applications setting to Opera mobile,but everytime i,lets say, click on some link on facebook (doesnt matter if i use SNAPTU or SOCIAL NETWORKS app) it opens default browser...
    yeah,and just for inspiration- what facebook client do you recommend? default one is quiet good only if it would show notifications....

    This is the intentional behavior! The backlight only turns off if the display/key lock is active! Light time out (5 to 60sec) is only for lowering the brightness!
    About the default application thing, this happens here too. Its a bug Can you report it using that form please?! http://www.forum.nokia.com/forms/Report_a_bug.xhtml
    Nokia Bug Tracking System @ http://dev.an3k.de/bugtracker/

  • Adobe Air Auto Turned Off Smoothing?!!!!

    Hi,
    I am using Adobe Air to create a media player. To have better video quality, I have added video smoothing enabled. However, recently I installed it on an ATOM PC, the video playback is lagging due to the performance of PC hardware. But, during the video playback, the video seems to be displayed without smoothing applied.
    Here I want to ask is Adobe Air will automatically turn off video smoothing on certain condition? If so, how can I prevent it to auto turn off? Thanks.

    How about first blit your image to a small bitmapData, then draw it on a large bitmapData (9X larger)?
    Like,
    var small_bmd:BitmapData = new BitmapData(SMALL_WIDTH, SMALL_HEIGHT, false);
    var large_bmd:BitmapData = new BitmapData(SMALL_WIDTH * 9, SMALL_HEIGHT * 9, false);
    var bm:Bitmap = new Bitmap(large_bmd, PixelSnapping.NEVER, false);
    var blitRect:Rectangle = new Rectangle(0, 0, 9, 9);
    var i:uint, j:uint, blitColor:uint;
    small_bmd.draw(SOURCE_IMAGE);
    large_bmd.lock();
    for(j = 0; j < SMALL_HEIGHT; j++){
         for(i = 0; i < SMALL_WIDTH; i++){
              blitColor = small_bmd.getPixel(i, j);
              blitRect.x = i * 9;
              blitRect.y = j * 9;
              large_bmd.fillRect(blitRect, blitColor);
    large_bmd.unlock();
    Not sure if the code works or not, but hopefully this helps.

  • Z3 Wifi Auto Turn off

    Hello , 
    Just got my z3 a few week and start using it . Moved from IOS . I am having a few problem with my Z3. I can't find my problem in the forum. My Wifi is doing auto turn off. I checked on Wifi Alaways on . But as soon as i m out of wifi signal it will go off. I always forgot to turn it on as a result of it . Could it be from one of the app i installed ? I m pretty sure nothing wrong with the product as i can use it when the wifi is on.
    Thanks

    Thanks for the reply . 
    @sehnsucht , exactly what u said . 
    @stockyvillage , i did exactly what you said and it's still not coming back . Any ideas plz it's getting annoy

  • E90-1 auto turn off [help please!!!]

    Dear ALL,
    I am a fresh man here. I am just got an E90(version E90-1) 1 week ago (made in Finland).
    And upgraded firmware 400.34.93. I think that everything would be OK however,I have a big problem.
    "My phone auto turn off without and notice" Sometimes just 10m after turn on, sometimes 10 hours.
    I am really confused now. Functionality of the phone have no problem besides problem above (auto off)
    I wonder it come from firmware issues.
    Have anyone had any experience about this situation, please help me!
    Thanks & best regards,
    Khanh Tran

    I have the same problem with my new 5800.
    I faced it at 1st day. 
    Sometime I suddenly look at it, and it's on restarting, or some times when I look at it, it's turned off.  
    Any one help me???? 
    Is it from hardware or software? 
    Is Nokia responsible for this buggy mobile?? 
    Excuse me for my bad English.  

  • 1510 auto turn off

    My HP1510 only start printing after the power is switched on.How can I configure this printer so that it will print automaticly after one of the clients has post a printjob?Or how to disable my printers auto-turn-off?

    Hello , Welcome to the HP Community!I hope you have a pleasant experience here. I'd like to help you with the power and wake questions you have regarding your HP printer. I need a little bit more information so I'm better able to assist: Which HP printer do you have? (Example: Deskjet 1050)Are you using your printer USB or Wirelessly?Is the printer plugged directly into a wall outlet? (The printer does have a power moderator built in, so if it is plugged into a surge bar or battery backup, it may be getting inconsistent power)I look forward to hearing back from you, and working towards a resolution to this issue.

  • New feature - auto turn off

    A feature of auto turn off the app would be very useful because I like to listen to music before I sleep with my Xperia but I don't want the app played till morning. If you guys can add it, it would be helpful. Thanks.
    Solved!
    Go to Solution.

    Hi this feature has been asked for and I have escalated this feature to the developers
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • Xperia V Auto-Reboot / Auto Turn-Off - And terrible HK Xperia Care service

    I am an owner of Xperia V (Black) and recently, the phone turns itself off automatically OR it reboots itself automatically whenever I use it for, say, around 15 minutes. It only happens when a SIM card is in the phone - it doesn't happen when, say, the SIM card is removed and I am only using WiFi to go on the internet. I use a 4G LTE card from PCCW Mobile in Hong Kong but in fact trying another 3G card there is the same issue.The most terrible thing is what I have so far experienced from the Hong Kong Xperia Care Centre in Mong Kok. I have brought my Xperia V for repair for already the third time and it has been the same issue which still persists! The first time (having waited for a week before the phone "allegedly" got repaired), the Xperia Care centre told me that they have changed the motherboard of the phone and things would be ok. But - no - just when I tested the phone before the Xperia Care guy, the phone turned itself off immediately when I was doing the Set Up procedure. Instead of having the phone back for further checking, the Xperia Care guy told me that it would be an issue with the PCCW Mobile SIM Card, and asked me to go to a PCCW shop to change for another SIM card. I did it, and it does NOT work and have to go back.I went back the second time the next day, and told the people that this is my second time of repairing the phone. The Xperia Care centre person then asked me whether I brought the "charger" of the phone so they can check the charger as well. I have no clue why this problem is related to the charger and why I am told to come back another time. I insisted to put down the phone for repair and in the end they accepted. Another week has passed, I got back the phone from Xperia Care centre. I was told they gave me a new battery for the phone. But, within 5 minutes of using the phone with my SIM card in (bearing in mind this is a new SIM card), the phone turned off AGAIN - despite having 9x% battery level!! It keeps turning off. I am so so so frustrated. I was stupid because I had already left the Xperia Care centre so wasn't able to show the guy the problem. But I just don't understand why the Xperia Care repair guy don't realise this problem - as long as they played with the phone for 5-10 minutes they would have discovered the problem.Now the phone is being repaired for the third time. I said that, given this phone seems to be unrepairable - I should be getting a new one instead of coming back for another 4th or 5th time!!! Unfortunately, the staff told me that this is impossible and they can only exchange parts for me.Sony, could you PLEASE make sure that this phone is getting well repaired before you return it to me??!! I am really sick of going to the repair centre for so many times and if this happens to again, I think I am going to swear I will never buy a Sony phone ever again. It's 3 weeks that I'm deprived of my Xperia phone to use!!

    hi zeefung and anyone else,     any interest to go Consumer Council to complain Sony Mobile for this unrepairatble auto reboot / auto turn off case?? https://www.facebook.com/sonymobilehk/posts/10151551299574699?comment_id=25793095&reply_comment_id=25967624&offset=0&total_comments=15&notif_t=feed_comment

  • Upgraded Cloudon ..now backlight does not auto turn off when not in use.  How do I do that

    Upgraded Cloudon.  Now the backlight does not turn off when not in use.  How can I correct this. Using iPad 1sted

    Is your question for a MacBook Air like your profile says ? You're in the iPad Forum, I could ask the hosts to move your question.

  • Auto turn off backlight keyboard T430

    Hello,
    is it possible to set the keyboard illumintaion that it turns off when I dont use the keyboard for X minutes?
    The illumination is really annoying, when watching something. And turning it off manually is really bothering.
    Dell Vostro has it, is it also possible on thinkpads?
    Thanks!

    Hi,
    Welcome to Lenovo Community Forums!
    I would like to inform you that as of now, there is no such settings available to turn off the backlit keyboard after a certain period of inactivity. The backlight automatically turns completely off only when the screen goes off or when the machine goes to sleep. I personally think that what you have suggested would be an incredibly useful one and our engineers will take it as a great suggestion to implement the same.
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Macbook keyboard backlight auto turn-on when room is dark?

    I have a late 2013 13" Retina Macbook Pro (running Mavericks) and am a relatively new OSX user. I know that I can modify keyboard backlight settings and have the brightness level adjust automatically (similar to how the screen brightness adjusts) however I don't actually want the keyboard's backlight on when the room is light. The fact that the auto-adjust setting makes the keyboard brighter in a light room is annoying to me.
    Is there any way to have the backlight automatically turn on ONLY when the room is BELOW a certain brightness threshold. Perhaps there is a 3rd party app that can add this functionality? Manually pressing F5 and F6 works fine, but ideally I'd like to have this automated somehow.
    Thanks!

    Billy_budd,   Unfortunately it's not even that things are finicky for me. I haven't experienced any auto-turnon functionality at all. Are you running Mavericks? I've seen some older posts referring to this being a possibility. Is there a specific way you've enabled this option? I don't see anything in my settings.
    If I select the tickbox I've highlighted in the screenshot below, the brightness of the keyboard mimicks the auto-audjust behaviour of the screen's backlight. With it unchecked, I have to use F5 or F6 to see any keyboard brightness changes. I haven't experienced the keyboard automatically turning on when the lights turn off.

  • Iphone 5 screen not auto turning off

    I was wondering if anyone else has noticed a difference in how the new iPhone turns off.  With my iPhone 4, I'd drop it in the trouser pocket and it would shut off within the 5 minutes, as set with auto lock.  But for some reason the new phone stays on.  I've forgotten to manually shut off the screen and found the phone on and the battery almost empty.  Annoying, to say the least.  The settings are exactly as they were with my previous phone, so I'm wondering if the touch screen technology for the new phone is different.
    Anyone else found this?  And, more importantly, has anyone else found a solution to fix it?

    This is a real problem for my new iPhone 5. I have auto-lock set to one minute.  It works less than 50% of the time. I do have Assistive Touch turned on under Accessibility.  I had the same set-up on my iPhone 4 running iOS 5...never had a problem.  My battery is going down prematurely because of this.  Help.  Please.
    UPDATE:  I tried the suggestion above.  When I touch the screen last...auto lock works.  If I don't, the screen stays on.  Thanks for the help.  I am hoping that a software update will fix this issue.  For now, I am happy to know about this temporary fix.
    Message was edited by: Linsam

  • IPod Nano 5G Backlight Never Turns Off!

    I recently got a new iPod Nano 5G for Christmas and when I set the backlight to 2 seconds it never turns off! So the battery ends up draining completely. Another problem is the battery drains really fast. If anyone can help me I would gladly appreciate it. Thanks in advance!

    iPod nano Support
    Apple Expert
    Call iPod and Mac technical support in your country or Take your iPod to an Apple Store. The staff will be able to check to determine if your ipod is experiencing a hardware problem.
    For those that live in the US - U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
    Message was edited by: CMCSK

  • My iphone 3G Backlight keeps turning off and on every 15 - 20 seconds.

    My iphone 3G keeps turning off and on (only backlight) every 15 - 20 seconds when in sleep mode. When I say turning on and off, it is not switch on-off, it is only back light that gets turn on and off. This is causing the battery to exhaust quickly.

    First, try to reset the phone by holding the sleep and home button until the Apple logo comes back again.
    If the problem persits, set it up "as new device". If this does not work, do it again, this time not using the backup after the new set up.
    If still no luck, get it serviced or visit your nearest Apple Store.

Maybe you are looking for

  • Stuck on iMessage with non-iPhone

    I have an iPhone 4 running iOS 5.0.1. My friend had an iPhone 4S for about a week, until she traded it in for an Android phone. For that week that we both had iPhones, we were obviously using iMessage. Now that she no longer has iOS, we (obviously) c

  • Try CS6 Design and Web Premium then CS6 Master Collection?

    Would it be possible to try CS6 Design & Web Premium for 30 days and then try CS6 Master Collection for an additional 30 days?

  • Network fonts confusion

    I have a 10.6.2 OSX Server (Mac Mini) with an automountable share setup as a shared library folder. On the server I install a new font and then move it to the shared library folder. On the client computer (10.5.8 Macbook) I see that /Network/Library/

  • Clipboard won't work. Help!

    All of a sudden the Clipboard has stopped working. Nothing will copy to it, or paste from it. This happens no matter what app I'm using. Why is this happening and how do I fix it?

  • Flash 9 and Final Cut Pro 6

    I am from an animation company, and we use Flash to animate. Our current version is Flash 9 and our sequences will be delivered as HD at 24fps. We are running tests at the moment, and have come into some problems. In Flash 9, we are exporting the seq