Backlight blinks out with each push of select button

Aye - what is up with my little buddy?
Touch clickwheel, backlight comes on.
Click to something like Artists. Push center button !BLINK! light goes out and back on.
Click an artist's name !BLINK! light goes out and back on.
Click an album or song !BLINK! light goes out and back on.
This stinks.
I did have a tough time getting Vista to play nice with iTunes, but it works ok now. I did do a reset of the iPod during that episode, if that's a hint.
Other annoying behavior - probably Vista related - Explorer window pops up with every sync. Disk use is not enabled. With disk use enabled, DND is forever.
Pentium 4 PC Home built Vista Ultimate no purchased music, all CD rips.
Pentium 4 PC Home built Windows Vista Ultimate
Pentium 4 PC Home built   Windows XP Pro  

To reset the bookmarks to the handful of default bookmarks that come with a new installation, start Firefox in [[safe mode|Firefox safe mode]], then in the first dialog box that appears select the option "Delete all bookmarks except for backups" then click "Make Changes and Restart". All of your Firefox bookmarks will be deleted, but your browsing history will still be intact.

Similar Messages

  • How do I change stills with each menu item selected?

    Hi all.
    I am trying to create a menu (with 10 items) which contains one single dropzone box, which will contain a still that changes with each menu item selected (instead of 10 different stills next to each item).
    I have absolutely no idea how to achieve this! Do I create a different menu for each item? Is there a way to have a slideshow within the menu that changes with each item selected?
    Please help!
    Many thanks
    James

    THe way to do what you want to do is layered menus which have some limits
    http://dvdstepbystep.com/layersover.php
    What you would do is change the item that appears in the same section - in other words there would be ten layers with a diffrerent picture in the same exact spot, the rectangle buttons sections do not need to be over the picture section
    http://dvdstepbystep.com/Layers_Example.dmg is a project that does changing images.

  • How to constuct a table with each row having a button to select

    Hi,
    Imagine i have 5 orders and i want to select one order to view or update in other page.
    How i construct a table with each row having a button to select it.
    I'm having a hard time to do this. How i select a backingBean method in Javascript?.
    Thanks

    I'm trying to put a <h:commandButton> inside <h:dataTable> like this:
                    <h:dataTable id="books" value="#{BuscarLibros.booksSearched}" var="book">
                        <h:column>
                            <f:facet name="header">
                                <h:outputText value="#{messages.title}"/>
                            </f:facet>
                        </h:column>
                        <h:column>
                            <f:facet name="header">
                                <h:outputText value="#{messages.isbn}"/>
                            </f:facet>
                            <h:outputText value="#{book.isdn}"/>
                        </h:column>
                        <h:column>
                            <h:outputFormat value="#{book.fechaPublicacion}">
                                <f:convertDateTime pattern="ddd/MM/yyyy"/>
                            </h:outputFormat>
                            <h:commandButton action="#{BuscarLibros.prepareUpdateBook}" value="Hello WORLD"/>
                        </h:column>
                    </h:dataTable>but it does not call the method.
    If it is outside it calls but inside not. Its strange because Duke's bookstore example from Sun Java EE is like that.
    Any clues?

  • Imac 27" Intel Core 7 CPU. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware scan and all is fine. Did clean wipe from Mavrick back

    Imac 27" Intel Core7  CPU 16 Gig RAM. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware diagnostic and all is fine. Did clean wipe from Mavrick back to Mountain Lion but problem remains. Apple Store can do no more.

    I did some more digging, it appears to be a backlight problem only. I can see the screen very dimly if I use a bright flashlight in a very dark room. It also seems to run ok if the brightness is turned down a LOT.
    So I'm thinking this is a LED driver board issue or the display itself. I'll open it up and check the connection between the two and see if I can get any more clues. At least I can use it somewhat now by dimming the display significantly...

  • Is there any way to type your email address so that it would print with the push of one button, like a macro??

    Is there any way to type your email address (or any other information) so that it would print with the push of one key -- like a macro?

    Take a look at Text Expander:
    http://www.smilesoftware.com/TextExpander/

  • My account picture goes out with each E-mail

    I just started using Mail 3.3. Each E-mail that I send includes my account picture (a baseball). Is there any way to delete this feature?
    Many thanks.
    grenstne

    That picture does not go anywhere other than your screen. You're safe.

  • I want to delete all my bookmarks/favourites with on push of a button not individually.

    In the past I found a way to delete all the bookmarks at once to clean out the registry but can't remember how I did it and can't seem to find it in help. There must be an easier way rather than one by one. The deleting bookmarks section in help pages doesn't do it. I run Vista home premium
    Thank you.

    To reset the bookmarks to the handful of default bookmarks that come with a new installation, start Firefox in [[safe mode|Firefox safe mode]], then in the first dialog box that appears select the option "Delete all bookmarks except for backups" then click "Make Changes and Restart". All of your Firefox bookmarks will be deleted, but your browsing history will still be intact.

  • Must I print out a new Alignment Page with each new cartridge?

    Do I need to print out a new Alignment Page with each new cartridge I install on my HP Photosmart C4480?  Or can I save and reuse the initial one I got when first installing my printer cartridges?  The Alignment pages all seem to be identical   when I print them out with each new cartridge I install, but I'm not examining them with a microscope.
    If I can save and reuse the Alignment page with sucessive cartridge replacements, when I am following the procedure for installing a new cartridge and the printer prompts me to print out a new Alignment page, is there an option to skip that step?  I don't recall seeing that option on the control panel window on the printer.
    Thank you!
    This question was solved.
    View Solution.

    themadtoker wrote:
    do NOT listen to this expert.
    YOU DO NOT NEED A NEW ALIGNMENT PAGE EVERY TIME YOU INSTALL A NEW CARTRIDGE
    I registered just to respond to this
    The alignment pages all look the same because they are all the same, pretty sure its a scam to let you use ink.  [snip]
    I am pretty sure you do not understand what the alignment page is for - it provides information for alignment of black vs. color and also is used to calibrate the operating energy for the color cartridge.
    You may be able to "fool" the printer by reusing an old alignment page, but the quality will suffer as you will not be running at the optimum energy.  
    You are certainly free to do what you want with your printer but please do not mislead others with misinformation.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Select Button goes into the Ipod!! How do you push it back out?

    Hi, I was just wondering how to push the Select Button out if you accidentally pushed it too hard? Once my ipod froze and I got really mad and pushed the Select button a little too hard. Now, it is not on the same plane as the click wheel. Help.

    Send it in for repair and hope you have not voided the warranty.

  • How can I stop and restart a .vi with a single front panel button?

    Hey guys, a newbie here.
    I have a .vi with a stacked sequence. The first few frames are hardware initialization and settings (LIN master node) and the data the hardware should transmit (frame response table). In the next frame there's a loop in which the hardware sends and recieves data (LIN monitor). If I want to change the initialization, settings or data values, I have to stop the .vi and restart it. I was wondering if there is a simple way of doing this with a single click (a button on the front panel).
    An alternative would be to put another loop outiside the whole stacked sequence and then run it a single time with a push of a button (the inner loop should let the outer one restart), is that possible?
    I hope I made any sense. Thanks for any suggestions.
    Tomaz
    Solved!
    Go to Solution.

    Ideally, redoing the code with a state machine would be the best way to go, if only so that you can add this powerful tool to your toolbox. That being said, wrapping your existing code in a while loop, with its own stop button to stop the program, will work if executing the entire sequence is ok. Where you might run into problems with this is if there is a step in the sequence that shouldn't be executed again, then it would require wrapping that sequence frame's code in a case statement that executes only the first time through. If you have the time, learning how to use a state machine would be a real benefit, really taking your LabVIEW knowledge to the next step, if you pardon the pun.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • Menu and select button causing ipod to reset

    Hi,
    Has anyone else had problems with their menu and select buttons causing the ipod to reset itself? As of now, I can't use either of those buttons without it resetting. I've tried using the updater, and I've tried manually resetting it. Any suggestions would be greatly appreciated.
    -Sarah

    Welcome to Apple Discussions!
    Is all the software on your computer and your iPod up to date?
    iTunes
    iPod Updater
    Updating iPod's Software
    Have you tried a restore?
    Restore the iPod
    btabz
    PS: I came into this thread thinking I was going to have to explain why holding down Menu+Select at the same time is supposed to cause a reset

  • Mail app is blank. I can not see any thing but a blank page with blue lined format. It does not shut down either. It just blinks out after a few seconds and the icon is there alone on my home screen then everything goes black and my home screen comes

    MY Mail app does not respond in anyway to anything. The icon shows I have over 300 emails but I have no access to them. When I tap on the Mail icon a blank white page comes up with the blue format lines. No emails, no inbox, nothing, not a single letter of the alphabet is there. Within a few seconds it blinks out and I see the icon and my home screen. Soon it just blinks out to black. I am left with the icon at the bottom center of the screen. I have no way to shut it down. I have no access to the emails (300) in my inbox. All that is happening is my memory is getting filled up with emails. I would appreciate any solution to this problem barring deleting my email set up in settings.
    if I have to resort to that I will, in the meantime I am hoping for a different resolution. Thanks everyone, you are all amazing and greatly appreciated. Sincerely, Diane.

    Hey There Diane,
    If I'm understanding your situation, you've got an iPad running iOS 6.1.3 and the Mail app is not working.  I understand you don't want to remove and re-add your email account.  
    The first thing I would suggest is to make sure your iPad is backed up to iCloud or iTunes.
    Do you have an iMAP or a POP email account?  When you go online to your email service provider's website, are you able to access the 300 emails in your inbox?
    Since the Mail app is part of your iOS operating system, upgrading that software to the latest version, which is 8.1.3 may resolve this issue.  
    If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    http://support.apple.com/en-us/HT201398
    Try these steps if you have an unresponsive app on your iPhone, iPad, or iPod touch.
    Restart the app
    Close the app and open it again.Restart your device
    Turn your device off and back on.Check for iOS and app updates
    Make sure that you're using latest version of iOS.
    Open the App Store and tap Updates.
    If updates are available, tap Update All.
    If asked, enter your Apple ID password. 
    You might need a Wi-Fi connection to update some apps.
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    http://support.apple.com/en-us/HT204204
    Update the iOS software on your iPhone, iPad, and iPod touch
    Learn how to update your iOS device wirelessly or using iTunes.
    iOS software updates introduce new features that let you do even more with your iPhone, iPad, or iPod touch. Be sure to keep your devices up to date so that you don't miss out on the latest features.Before you update
    Back up your device to iCloud or iTunes.
    If you use your device's Personal Hotspot for your computer's Internet connection, update your device wirelessly or connect your computer to another network.Update your device wirelessly
    The easiest way to update your device is wirelessly, also called “over the air.” Here’s how:
    Plug in your device to a power source.
    Tap Settings > General > Software Update.
    Tap Download and Install. Updates might download automatically while your device is connected to Wi-Fi and a power source.
    Tap Install, or tap Later to install the update later. If you use a passcode, you'll need to enter it before installing the update.
    If you have some free space, but not enough to update over the air, you can either update using iTunes or delete content manually from your device. Whether you use iTunes or update over the air, you'll have the same amount of free space on your device after you update.
    Some iOS software updates aren't available as over-the-air updates. VPN or proxy connections might prevent your device from contacting the iOS update servers.Update your device using iTunes
    If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
    Install the latest version of iTunes on your computer.
    Plug in your device to your computer.
    In iTunes, select your device.
    In the Summary pane, click Check for Update. 
    Click Download and Update.
    If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
    Find out what to do if you get other error messages while updating your device.
    Last Modified: Jan 12, 2015
    Hope this helps ...
    - Judy

  • Torch Select Button Doesn't Work with Keyboard Out

    Hi there, need some help.
    Just recently (2 wks) the middle select button has quit working on my torch when I have the keyboard extended.  I can still scroll around the screen with it, but when I push it to "select" it does nothing.  The button works normally when I have the keyboard put away so this seems like a software problem or setting I have wrong but I can't figure it out.  Any help would be appreciated as this is driving me crazy!  Thanks.

    Please try if a clean reboot will fix it. Remove the battery while the device is ON, replace it after a few seconds and let it reboot itself. Let us know if this resoves the issue.
    Ron
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • I want sound to go to line out but each new boot it selects internal speaker

    I select sound to go to line out but with each new boot it reverts internal speaker. How can I "save" my sound preference??

    Hi Del.
    First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
    Then move these files to the Desktop...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.dock.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.sidebarlists.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

  • Run two counters simultaneously with out affecting each other

    Hi
    I am new to labview. I am trying to figure out how the two counters/ timers( one is nongateable standard timer and another is standard timer which is software based) run simultaneously. I created it in different while loops. Is it possible to create two counters in single loop with out affecting each other?

    Hi Pavani,
    Welcome to the forums!  As a new LabVIEW user there are many helpful resources out there to get you started.  I would like to point you to the two links in my signature.  The first is a six hour LabVIEW course and the second helps you learn DAQmx.  Also take advantage of the shipping examples.  When you open LabVIEW select Find Examples to open the Example Finder.  Assuming you are using DAQmx, you can go to Hardware Input and Output>>DAQmx>>Counter Measurements and find many useful example programs that either do what you want or can be modified to perform the task you desire.
    To answer you question, two counters in the same loop do not affect each other.  The counters will gather data separately.  By putting them in the same loop, you just perform the reads in software at the same time.
    Regards,
    Ima
    Applications Engineer
    National Instruments
    LabVIEW Introduction Course - Six Hours
    Getting Started with NI-DAQmx

Maybe you are looking for