Backlight continuously on, PLEASE help

This might seem like a simple question, but where does one switch off the back light? My 9300's backlight stays on all the time, which results in the battery power running down VERY QUICKLY. Can someone please assist? Your help will be appreciated. Thanx.

1. Turn off your phone, leave your battery and SIM out for 5-10minutes and put everything back in and turn it on .
2. Restore factory settings: type *#7780# at the standby screen. Enter 12345 for the security code or the one you've changed it to.
Before you try the next two steps, backup your phone memory using PC Suite.
3. Soft reset: This will clean up your phone memory. All user data, applications etc stored in the phone memory will be destroyed. Type *#7370#. Enter the security code when prompted; default is 12345.
4. Hard reset: This is the last resort. The effect will be the same as that of a soft reset. Turn off your phone, press and hold down these keys: the call (Green) button, '*', '3'. Turn on your phone without releasing them. Leave the keys only after you see the region selection screen.
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Similar Messages

My app store won't open, when i click on the app store it just continues buffering please help me

My app store won't open, when i click on the app store it just continues buffering please help me

Hello moirafromvirginia water,
The article linked below details a number of troubleshooting steps that can help restore your Mac's connection to the iTunes and App Stores.
Can't connect to the iTunes Store
https://support.apple.com/en-us/HT201400
Regards,
Allen

My ipod touch 4g is not being recognised on my new toshiba laptop. The ipod touch starts charging then stops. This keeps continuing. Please help.

my ipod touch 4g is not being recognised on my new toshiba laptop or itunes. Its not being shown on my computer and its not shown as 'unspecified' in the 'devices window'. The ipod touch starts charging then stops this keeps continuing like a ongoing circle. Please help.
I have tried on my family members laptop and its seems to be picking up. So the ipod or the usb wire is not the issue.
I have tried everything from reinstalling itunes and updating windows.
I have tried the diagnostics test and its still says the ipod cannot be found.

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

I have updates on my iPad however when I try and update them it won't allow me to continue..please help this is so annoying to see that I have updates every time I open my iPad.

I have updates on my iPad but when I try to perform the updates it will not continue the process. It starts then it fails I have 16 updates. This is so annoying because every time I look at my iPad I see those stupid update messages. Please help I'm about to lose it!

Are you connected to wifi? Are the updates for the apps for ios 7.0.3? If they are then try updating your ipad then going in and updating your apps.

"Do you want to allow the following program to make changes to your computer?" I get this message in a box everytime I open firefox. I answer "Yes" but it continues. Please help.

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/856850]]</blockquote>
"Do you want to allow the following program to make changes to your computer?". I get this message everytime I open Firefox. I select "Yes" and then the program opens. However, I continue to get this question everytime I open firefox. Please help.

Can anyone answer my question?

IMovie Full Quality Export Video Stops As Audio Continues. PLEASE HELP

Im making a video of my camping trip, and I tried to export it using the Expert Settings. When I watched it, it stopped about 1.5 minutes in. The video freezes but the audio continues. I really need this video up soon! If you've experienced this and know how to fix it, please help! I used a Canon SD1000 to record, I have a macbook core duo with 1 GB memory, 60 Gig Hard Drive, and iMovie HD 6.0.3.
Thanks a bunch!
-Chris

Hi OK
Then there is sufficient space
And no external hard disk that interferes.
Then I would try to delete the iMovie pref file
iMovie
-->/Users/YourName**/Library/Preferences/com.apple.iMovie.plist
and
-->/Users/YourName**/Library/Preferences/com.apple.iMovie3.plist
and see if a new export will work
(to make this easy one might just start a new account (log-in) and use this and re-try)
- other thoughts:
• versions: Mac OS X.4.9 and iMovie 6.0.3 AND QT ????? 7.1.6 ?
• Running (Apple Disk Util tool): Repair permissions and Repair hard disk
might help (second one needs start from CD/DVD or external hard disk)
Yours Bengt W

Installation of .pkg and .mpkg files does not continue. Please help

1. Installation of .pkg and .mpkg files does not continue after password prompt. Please help if anyone have fix this issue. I tried repairing disk permissions but no change.
2. When I do the unlock to make the changes then again that lock does not allow me to unlock again for the particular permission like internet sharing
Mac Mini running OS X 10.7.5

harrymash wrote:
1. Installation of .pkg and .mpkg files does not continue after password prompt. Please help if anyone have fix this issue. I tried repairing disk permissions but no change.
2. When I do the unlock to make the changes then again that lock does not allow me to unlock again for the particular permission like internet sharing
Mac Mini running OS X 10.7.5
What are you trying to install?
Pete

Nokia N95 Screen Backlight Problem! Please Help Wi...

Its been about 9 month since I purchased Nokia N95. Last night, when I was watching a video, its screen backlight began to flickr. It turned very dim and then restored. It turned again compeletely off, then came to its normal brightness. I tilted the phone in all ways, hto it gently to know whether some wire inside is loose, open and closed the slider. But the screen went on and off itself. I reset my phone by hard formatting (*#7370#) but of no use. The next day, it did the same. After two days, now it is stable. But I fear it might be started again.
I want to know can this problem be due to some moisture inside my phone or is it because of some hardware proble. And please suggest what should I do. My phone is still under warrenty, but the phone is stable for at least a whole day. Should I carry it to warrenter for repair?
Any suggestions in this regard? Please reply with practical experience and not a hypothetical reply.
I appreciate your cooperation.
Ejaz

Hi gilli34
Caps off might be nice.
To include a "smiley" in a SMS (predictive text must be on) just press "1" three times and press"*" to change it to a wink!
You could always look at Animated SMS here:
http://my-symbian.com/s60v3/software/applications.php?fldAuto=314&faq=1
Happy to have helped forum in a small way with a Support Ratio = 37.0

Work stoppage because of scratch disk error. The torture continues! Please help!

Hi, everyone:
I would greatly appreciate help.
In December, I began receiving the error message Could not initialize Photoshop because the scratch disks are full. I deleted all the large files from my hard drive, and the problem went away.
Now, I am working on a large Photoshop file (i.e., 585,155kb). I am working at 300 ppi for print reproduction, using multiple layers. I am opening each new image to be added to the master document in a separate Photoshop window. I set the resolution of each at 300 ppi, then crop and transfer to its new layer in the master file (using drag and drop). After I crop and transfer, I close the open window of the file I just cropped and transferred. No other programs are running. This seems to be fairly standard stuff.
All was fine (although very slow) until two nights ago. When cropping, I received the error Could not complete your request because the scratch disks are full.
Once again, I researched scratch disk error messages, and I came to the conclusion I had no choice but to increase my RAM. So, I upgraded from 512MB to 2 GIG. (I successfully opened my PC and installed the RAM myself, confirming it on the Properties window. A major success, as the RAM was costly, and difficult to find, so I saved some money and time by installing it myself!)
With great enthusiasm and excitement, I opened the master Photoshop file again and the next image to be set to 300 ppi, cropped, and transferred over to a layer. But, when I tried to crop, I received the SAME sickening message, Could not complete your request because the scratch disks are full.
How can this be? I have four times the RAM I had before, which was costly, and I expected Photoshop to work swift and smooth with this new, more efficient increase in RAM. I am simply bewildered.
I tried changing my Scratch Disks to C: rather than Startup, but then I received the error message You currently have Adobe Photoshops primary Scratch and Windows primary paging file on the same volume, which can result in reduced performance. It is recommended that you set Adobe Photoshops primary Scratch volume to be on a different volume, preferably on a different physical drive.
More scratch disk torture.
None of this makes any sense, and, while Photoshop error messages are upsetting, they dont explain what you should do. I am not a programmer, and I am totally stumped.
I know that someone somewhere upgraded their RAM and still received a Scratch disk error too, so I hope someone can advise me on what I need to do next. I cannot continue my work and just spent a lot of money on RAM.
Thank you!

Hi, everyone: Thank you for your help with my problem. I appreciate everyones time and feedback, as well as the openness to help and explain (and further explain) what I do not fully understand. I learned a lot more, as Photoshop always introduces new things to learn and figure out. (One has to be part programmer to make PS work!) I appreciated the clear instructions and simple analogies too (for example, the head vs. suitcase was great).
Good news: The Scratch disk error has subsided for now!
I believe (although I am not certain) that the problem was something very simple after all, and I am embarassed. Only time will tell if this was really the culprit, for, if the Scratch disk error reappears later, it may be something else all together that is lurking in the background.
For now, it seems to have been a problem that Peter K.s advice helped me discover...
Peter's advice was to check the crop settings in the option bar for the common mistake of specifying pixels/cm rather than pixels/inch. My setting was correct (pixels/inch). However, I inadvertently used my pixel width number as inches in the Width setting, causing a MUCH bigger file than intended. When I changed the number, the Scratch disk error disappeared, putting me back in business! Thanks, Peter, for pointing me the direction that eventually revealed the problem.
Could it be this simple?
I kept working most of the night to test drive, free of the Scratch disk error for now! I hope the good fortune continues.
The lesson for others may be to check simple settings carefully first, before diving into the deep end of Photoshop.
Meanwhile, the new RAM is speeding up Photoshop considerably, so I feel like it was a good investment and will probably help safeguard against further Scratch disk errors, which I have had in the past. Also, Ive taken everyones advice to consider a dedicated, separate HD for Photoshop Scratch disk use. Ill plan that as a future/next investment. However, technical notes say an external HD isnt a good idea, but I dont have capacity for an internal HD, so it will have to be an external one. I would appreciate any words of wisdom here. Also, I still have to research SATA-II drives too (which are new to me) and ascertain if I can utilize one on my system. It may simply be too old for this technology, if it is new?
If interested, I also tried several things:
(1) Checking the space available on my HD again The pie chart indicated it was approximately half full (there was 46% free space, or 34.38 GB free space). I'll look for more to remove, but it seems reasonable to have 46 percent available, I think.
(2) Checking the need to DEFRAG The Analyzer said a DEFRAG was not needed, and, indeed, the color chart that plotted the files showed only a thin red line or two (red indicates fragmentation).
(3) Searching for more TEMP files to delete. I found 750 MB in TEMP files to delete, so, while not a lot, there were some still there. Previously I followed these directions to safely delete temporary Internet files: Ctrl Panel > Internet Options > General > Delete Files > Delete all offline content. But, when I navigated to C:\Windows\Temp, sure enough, I found more. Directly opening C:\Windows\Temp seems to be more effective. (I have done it that way in the past too, but lately I was trying to follow the "safe" way I had stumbled across recently.)
(4) Checking my Photoshop Memory Allocation, which was already set at 85% (which may be too high, so I may back it down later, but I did not change it for now). I remembered adjusting it some time ago, but I had forgotten by how much!
I also read the links that everyone recommended, as well as numerous other documents I found across the Web. Some introduced still more to learn/understand, of course.
Thank you once again. Ill resurrect or repost if the Scratch disk error haunts me again later, but, for now, a happy ending.

Toshiba Satellite A205- Invalid system disk.... please help!

my pc is running on Windows Vista and it needs to be reinstalled/restore(been very slow),
i've got a big problem because my optical drive won't read DVD's including it's recovery
disc... So i've finally decided to downgrade my OS to Windows XP since my optical drive has
no problem on reading/accessing CD's. i just formatted my hard drive and ready to install
windows xp but there was an error when already on the " preparing for setup" part.... It says
" Setup did not find any hard disk drives installed in your computer. Make sure any hard disk
drives are powered on and properly connected to your computer and that any disk-related
hardware configuration is correct. This may involve running a manufacturer supplied
diagnostic or setup program... setup cannot continue.
PLEASE HELP!!! i really need your help....THANK YOU!!!

Satellite L305-S5955
See the section Hard Drive Recovery Utilities, beginning on p. 60 of the User's Guide.
Satellite L300 Series User’s Guide
-Jerry

Please help ASAP! I downloaded an app to change the Windows 10 login screen & now the screen flashes

I downloaded Windows 10 Login Background Changer and now when my laptop starts I can't even get to the login screen. After the Acer screen at startup, it says "Please Wait...." but then the screen just flashes continually. Please help ASAP! Thank you!

I did the exact same thing and had a very similar issue (flashing lock screen and couldn't get past the lock screen). I tried a system restore, resetting my PC, doing a clean install of Win10, and both methods of booting in SafeMode -- none of these methods worked. Called Microsoft several times; Level 1 tech told me to do a USB installation of Win10 (couldn't get my laptop to restart the way the USB installation needed); Level 2 tech told me to do a USB installation of Win8.1 (again did not work because my laptop could not restart properly). Gave up with tech support. The only way i was able to fix this problem was by choosing the "restore PC to factory settings" option. All your files and programs will be lost, but all of mine were already lost anyway after I tried doing a clean install of Win10. My laptop (S7-392) restored to Win8; I updated all my drivers and then made a recovery drive; did a USB installation of Win8.1, updated drivers and made another recovery drive. I have since done a USB installation of Win10 and upgraded my drivers. IF the same issue happens again i'll just end up reverting back to Win8.1 for a while.

HT4623 please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H.

Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.

Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
In the problem report, this is the error that stood out:
Crashed Thread: 8 Dispatch queue: com.apple.iad.iadidmanager
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090

Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W.

I recently did a restore to factory settings on my 2009 macbook and now im stuck on the welcome screen where u choose the country my trackpad allows me to move the arrow around but when i tap continue to choose it does nothing. someone please help

I recently restored my 2009 macbook to factory settings and now its stuck on the welcome screen where u choose your country. My trackpad allows me to move the arrow around but when I tap on it to select continue it does nothing at all. The only thing else it will allow me to do is go thru the voice over tutorial by pressing escape. Please help me fix this I need to use my computer.

Hi, teezbreezy64.
I found a couple of resources to help troubleshoot the issue you are experiencing. The first is this article named Intel-based Mac notebooks: Troubleshooting unresponsive trackpad issues found here http://support.apple.com/kb/TS1248.
Try disconnecting the MagSafe connector from the computer and check the trackpad function. If the trackpad becomes responsive again, improper grounding may be the issue.
If a two-prong AC plug is being used with the power adapter, try using the three-prong power cable that shipped with your computer and plug it into a grounded outlet.
If the issue persists, make sure the third prong is present and do not use an adapter to enable the three-prong adapter to be used in a two-prong outlet. Note that the ground in the three-prong outlet may not be connected. This is common in older homes or buildings with replaced outlets. In these situations, the three-prong power cable will not improve trackpad responsiveness.
If a grounded outlet is not available, rest your palm on the palm rest when using the trackpad. This should enable the trackpad to function properly.
If that does not resolve the issue then I recommend resetting the SMC on your computer. Here is an article on how to do that:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Regards,
Jason H.

Dear Apple, I have an iPhone 4 32GB (black), i bought from softbank, japan. Now, I have recently finished a graduate and i'll comeback home in Laos. But i can't continue to use my iphone. Could you please help me to unlock my phone so I can use it with o

Dear Apple,
I have an iPhone 4 32GB (black), i bought from softbank, japan. Now, I have recently finished a graduate and i'll comeback home in Laos. But i can't continue to use my iphone.
Could you please help me to unlock my phone so I can use it with other carrier Sims. I would appreciate it.
Please let me know if you could help me out. Thanks again.
<Edited by Host>

Like ckuan said, Apple does not unlock iPhone; your carrier does, provided that the carrier offers this service.
Unfortunately, SoftBank does not offer authorized unlocking of iPhone.
Your best option is to sell this phone and buy another iPhone from the carrier of your choice or better buy a factory unlocked iPhone so you would be able to use it with any compatible GSM carrier around the world.

Backlight continuously on, PLEASE help

Similar Messages

Maybe you are looking for