Backlight does not work again...

I have Toshiba Z30-A-12N.
As in wiki is written, the Toshiba acpi and the intel drivers have a backlight driver. Thus, there are two backlight as a vendor. Until today, I used the solution of the wiki with good results. However, after the last upgrade this solution doesn't work. The last upgrade was a little big, with gnome-shell and the kernel, so I don't know what is the reason.  I can change the backlight manually with the tee in the /sys/class/backlight/intel but in gnome only tochiba one is changes without any effect.

did u look around on this site (in the forums) for ure specific problem?? if u have, it would be best I think to take it to an Apple store or send it in for repairs...because it sounds like an internal problem, therefore not one u can fix...does that help a bit?

Similar Messages

  • Auto backlight does not work on 4S with iOS 7! With iOS 6.1.3 I had the same problem.Why?

    Auto backlight does not work on 4S with iOS 7. I had the same problem with iOS 6.1.3! Why ?

    rlwebb71 wrote:
    ... I have the latest generation iPod touch, not the 5, but the latest. So why can't Siri come out and play? 
    Siri is not a feature of that iPod... 4th Gen...
    iOS 6  Which Software for Which iDevices...
    http://support.apple.com/kb/HT5457

  • Keyboard Backlight does not work

    I just got my new 2009 13" MacBook Pro.
    I have installed Vista and loaded my Boot Camp drivers.
    The Keyboard Backlight does not work.
    Any suggestions?
    Thanks in advance!

    Powerplan works great!

  • The backlight does not work.

    hello, I have a problem with my iphone 4. Yesterday I set the alarm, and the screen went black. The phone still works but the backlight does not work. Can you help me ? Plz

    I have turned it on under settings.
    I have reset it.
    I have restored it.
    I have got my Ipod for at least six months.
    I am using the latest firm ware.
    My Ipod used to work well, but some day while I was running it froze. After that I have rested and restored several times and what is happened is some times it is still freezing or keeping change the music without playing (like searching). Additionally, I have noticed tha the back light do not turn on. I realy want stoping reset and restore my Ipod, almost every time I use it I have to perform these procedures.
    Any help?

  • My backlight does not work

    The backlight of my Video Ipod does not go on, but it works perfectly. What do i do?

    I suggest a reset.. PUSH and HOLD the middle button and the menu button at the same time for 10 seconds..
    If that does not work you might want to try a restore.

  • MacBook Pro 13-inc, keyboard backlight does not work

    My keyboard backligth does not work.
    I have a MacBook Pro 13-inch, early 2011 with MAC OS X Lion 10.7.3.
    I already set the preferences to be on in autmatic mode with low ligth on but this did not work.
    When I turn on the computer the keyboar lights on but as soon as the computer finish the log on the keyboard goes off.
    I will appreciatte any advise.

    Powerplan works great!

  • It will sometimes work, and then after I shut it down, and then it does not work again. It says it is the proxy server.

    The proxy server is refusing connections
    Firefox is configured to use a proxy server that is refusing connections.
    It worked this morning, and now it is not working. It keeps doing this me. It will work, and then when I go to get on it again, it no longer works.
    * Check the proxy settings to make sure that they are correct.
    * Contact your network administrator to make sure the proxy server is
    working.

    Thank you, so much! That worked!!! I appreciate your help.

  • Satellite L300-1bd LCD backlight does not work properly

    Hi,
    A few days ago, the backlight of my l300 stopped to function properly.
    I have tried turning it on a few times, and sometimes it briefly lights up and then goes off again.
    Any idea's on what my next move should be?
    I called a repairshop, and the guy i spoke to told me they would charge 50 euro's just to open it and that he was afraid he might have te put a new lcd screen in which would cost me another 150 euro's. I cannot afford this, nor do i think it would be a smart move to do a 200 euro repair on this notebook..
    now because the backlight went briefly on and then off, i am kind of hopeing the cable that connects the screen to the computer might be broken/not plugged in properly. I found a repair manual which makes me think i can change it myself, but: is there a way i can make sure what the defect is before trying to plug in a new cable? what kind of cable do i need, and where can i get this?
    hope you guys can help me out!

    > A few days ago, the backlight of my l300 stopped to function properly.
    > I have tried turning it on a few times, and sometimes it briefly lights up and then goes off again.
    > Any idea's on what my next move should be?
    Either its just a FL inverter issue or the display fault
    The FL inverter controls the display backlight and therefore I think its FL inverter.
    This is a small part hidden behind the plastic display frame.
    I dont know ho much is it but its not very expensive like display itself.

  • TS3276 My mail will not let me send mail and I seem to have lost my "Send" button  I have to look under messages to find Send. I spent two hours with my service provider last evening trying to fix this issue and now today it does not work again, what did

    I suddenly cannot send mail, I get the message I am not connected to my provider  I seem to remember I had a send button of a paper airplane on my mail page and now I have to look under messages to find the send

    Please describe in detail what happened when you took all the applicable steps in the support article that led you here. That's the starting point for any further efforts to solve the problem.

  • Tap to click does not work. Is there no solution?

    I have XP SP3 with the latest 2.1.1 update. Tapping doesn't work. Keyboard backlight does not work. Eject does not work. Scrolling is hyper active even with mouse set to 1 click scroll. But worst of all, NO MOUSE CLICK.
    If there is a special setting to make, please let me know. I can live with the other problems but not being able to tap is extremely irritating.
    Help! Any Apple Certified Techs out there?

    For those who care to know, the tap to click pretty much does NOT work at all no matter what version of Windows you have.
    I called tech support twice today. The first "expert" told me to try using XP service pack 2. He claimed his tap function worked during his training program.
    I said OK and proceeded to erase and reinstall the whole thing. No go.
    The second tech reviewed my case number and flat out said, "we don't support windows, I can't help you". I understand that some things are beyond the scope of support but to me, this was an apple boot camp issue. Every salesperson I spoke to said it was no problem. There are problems. Probably to be fixed at a later date, however, it is obviously not a priority.
    I do have some good news. I discovered that spyware programs such as Webroot Spy Sweeper seem to make the bootcamp manager crash (you'll see a popup at startup).
    But if you just reinstall bootcamp again it will rebuild the drivers and should work.
    Also, you can reduce the amount of hyper scrolling across the trackpad by setting the mouse click wheel to 1 (3 by default) in control panel. Be sure to check out the bootcamp panel and enable stuff like the fn keys.
    I am now considering Parallels as a solution. If it runs inside OSX then maybe it won't suffer the trackpad issues.
    I am staying with SP2 until someone says SP3 is better. Anyone else have any thoughts?

  • HT201401 Backlighting is not working how do I fix this?

    MY sister got a new phone and she gave me her iphone3. However the backlighting does not work, how can I fix this? Do I need to take the phone to apple?

    Try restarting the iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo.  If you are still having problems, then you should take your iPhone to Apple for repair. 

  • Why SPSS 19 does not works with Mavericks?

    I upgrade my operating system Snow Leopard to Mavericks and SPSS 19 does not work again.
    I tried to install it  again and send me and SPSS show me and error of licence. Can you help me please?

    Why do you want to use a h:commandButton and not an <input type="button"> or a <button>? I don't think that you want to execute a backing bean action. Anyway, in this case you can also add return: false; to the onclick event so that it prevents the button from submitting the form to the server.

  • I updated, but now my keyboard backlight will not work. Any suggestions?

    I recently updated my MacBook Pro to OSX 10.8.4, but now my keyboard backlight does not work and there is nothing I can find in the Keyboard section of preferences to turn it back on. Anyone else had this problem?

    One of these steps should help.
    1. Restart.
    2. Press F6 key couple of times.
    3. System Preferences > Keyboard > Keyboard
                           Uncheck the box next to "Adjust keyboard brightness in low light"
    4. Reset SMC
        http://support.apple.com/kb/HT3964
       Choose the method for:
       "Resetting SMC on portables with a battery you should not remove on your own".

  • I want to have all my tabs return after closing. In Tools/Options/General/ I have' Show my Windows and Tabs from last time' checked, but it does not work. When I open FF again none of my formerly open Tabs show... FF v.4.

    When I open FF up again after I have closed it, I want all tabs to return. In Tools/Options/General/ I have' Show my Windows and Tabs from last time' checked-does not work. In addition, the feedback window fails to 'Submit...!'

    Some things to check:
    #'''Browsing history must be saved'''
    #*Firefox button: Firefox button > Options > Options > Privacy > [X] Remember my browsing history
    #*Menu Bar: Tools > Options > Privacy > [X] Remember my browsing history
    #'''Also make sure you do not clear "Browsing History" when using Clear Recent History or when closing Firefox'''
    #*Using Clear Recent History
    #**Firefox button: Firefox button > History >Clear Recent History
    #**Menu Bar: Tools > Clear Recent History
    #*When closing Firefox
    #**Firefox button: Firefox button > Options > Options > Privacy (checked) > Settings
    #**Menu Bar: Tools > Options > Privacy (checked) > Settings
    #**See: https://support.mozilla.com/en-US/kb/Clear%20Recent%20History
    #'''Make sure you are not in Private Browsing mode''' or '''in permanent Private Browsing mode''':
    #*See: https://support.mozilla.com/en-US/kb/Private%20Browsing
    #'''If you have the'''Tab Mix Plus'''extension''', then disable the built-in session restore.

  • After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. Apple care does not know what is the cause. Please help

    After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
    During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.

    I had the same problem and found the solution here:
    https://discussions.apple.com/thread/3189272

Maybe you are looking for

  • Use TCP, UDP, or other to communicate with UUT using MAC address instead of IP address

    I want to verify that the Ethernet port on my UUT works.  My plan was to ping the UUT and verify that I got a response.  However, the UUTs will come to test with an IP that I cannot use on the network.  [Please don't ask me to explain why -- the IT g

  • RSS feed differences under 10.5.6

    We have a dynamic user unique RSS feed being created via PHP, its reliant on php session data. Under Safari 3.2.1 on 10.4.x when a session is created the link to the RSS works and reads the same session data and creates the RSS feed. Safari 3.2.1 on

  • How do I send link using Thunderbird- always defaults to outlook express

    Both my wife and I use this PC my email is via Thunderbird, she uses outlook express. When I try to forward a link in firefox, it always opens outlook express- I want it to come from my account at thunderbird. how do I fix this?

  • Ipod sync problem

    i have downloaded many song to my ipod touch from itunes before, but now when i wanna dowload some more song, the itunes says "iTunes cannot read the contents of the iPod "Diksha's iPod". Go to the Summary tab in iPod and lick Restore to restore this

  • Captivate without Flash Knowledge

    Is it possible to create screen movement training demos with Captivate without having experience with Flash? I know it exports to Flash...but does one need to know Flash to create basic demos?