Backlight doesent works

hi i have a torch 9800
os 6.0 bundle 2949
my backlight led from return and call end button is not working can anyone help me  ?

hi and thx 4 answering
i can not read all from ur message but i understand .. i must make a akku pull  ok not working after akku pull i think it is a malfunction of the led  but i am not shure do ur know where can i order a new led  i think i screw my device open by himself my guarantee is ended in january next year but in the shop t mobile telling me i becomme not a new device maybe a reparing device i would like my own device back  its not a major problem but i go crazy if the led works only on left side
sorry 4 my writing but i am a german fan of bb
maybe have other users a solution  hugs and nice weekend
gerald

Similar Messages

  • My "arrow" doesent work, cant "go back" one page (so I get back where I was before clicking on a "item" in FB).

    When I am on FB playing f.eks CW and "click" on an "item", I get that item on "next" page - climb that one and want to go back to the place I was before - but the "arrow" doesent work anymore.
    (go back a page - click right or pull down to view history).
    I think this is a FIREFOX issue - so FIREFOX have to look at the problem! There is no other "users" who cant help me with this!

    The Macbook Air is a low end Macintosh for graphics apps and you are asking it to perform a heavy pro workflow using a pro application. The integrated GPU of MBAs is a serious limiter to heavy graphics. Personally I would expect flaky performance with certain operations. In general I recommend that Aperture users choose boxes with independent GPUs and capable of taking 16 GB RAM if necessary.
    It will be important to carefully optimize workflow. How much RAM is in the MBA? The most Apple specs is 8 GB but you can check OWC to see if you can go to 16 GB. My Aperture/Photoshop workflow paged out at 8 GB RAM before I upgraded to 16 GB RAM.
    You should evaluate whether or not you have adequate RAM:
    Look at the Page Outs number under System Memory on the Activity Monitor app before starting a typical Aperture/Photoshop work session and write the number down. Recheck the Page Outs count after working for a few hours and write the number down again. If the page outs change (manual calculation of ending page outs number minus starting page outs number) is not zero your workflow is RAM-starved.
    Ignore the pie charts and other info in Activity Monitor because they can be misleading regarding RAM usage. For RAM analysis, manually count page outs before and after a work session.
    HTH
    -Allen

  • Problem with Macbook Pro early 2011, webcam not working in any apps and windows 7 or 8 on bootcamp, keyboard backlight not working?

    Hi Guys
    I recently bought a second hand early 2011 Macbook Pro 15 inch and are having 2 problems. The first is that none of the apps detects my webcam at all, the second is, i have Windows 8 installed on bootcamp but are unable to get the keyboard backlight to work in 7 or 8. The backlight works perfect in os x 10.8.5 though. I need a little bit of help guys.....

    Go to Apple Menu / About This Mac. Click on More Info ... next on System Report. In the left hand column, under Hardware, select USB. The right side will show the USB Device Tree. Look through that and check for "Built-in iSight". That is your camera. If it is not listed the camera is not working.
    For backlighting, try this: go to System Preferences / Keyboard. Uncheck "Adjust keyboard lighting in low light".

  • After System restore from Time Capsule Mail doesent work

    HI
    i resored my Time capsule backup on my mac because of the need for space to install windows on my mac (Boot camp doesent works!) i can use all my programms and data well exept Mail when i start mail it Flashes:
    You can’t use this version of Mail with this version of Mac OS X
    You have Mail version 4.0 (1075/1076). It can’t be used on Mac OS X Version 10.6.1 (Build 10B504). For more information, click the Help button.
    (help button is online help....)
    But its just a 1to1 backup.....
    Can anyone help me??

    Blinkyrus wrote:
    i restored my Time capsule backup on my mac because of the need for space to install windows on my mac (Boot camp doesent works!) i can use all my programms and data well exept Mail when i start mail it Flashes:
    You can’t use this version of Mail with this version of Mac OS X
    You have Mail version 4.0 (1075/1076). It can’t be used on Mac OS X Version 10.6.1 (Build 10B504). For more information, click the Help button.
    (help button is online help....)
    The first thing I'd try is to download and install the Mac OS X 10.6.1 updater:
    http://support.apple.com/kb/DL930
    It would have been more appropriate to post your message in one of the Mac OS X 10.6 message sections.

  • Bluetooth, iSight and Keyboard Backlight not working. Please help!

    My Bluetooth stopped working along with my iSight and Keyboard Backlight. I first noticed the weird sign over the bluetooth icon, and it read "Bluetooth not available". I payed no attention to it for a while until I tried to take a picture with Photo Booth and I read "No camera found", for some reason I tried to dim the backlight on the keyboard and a blocked sign appeared under the brightness level, not letting me do anything (Later I was able to use the backlight with the LabTick app). I have tried everything. SMC, PRAM, NVRAM, logging as diferent and new users, booting in safe mode... every solution I have found on the internet has been tested by me. Then I read this about the Hardware Test solution, and surprisingly after performing the Hardware Test no problems were found! So basically my MacBook Pro (mid 2010) is not having any trouble of any sorts with anything. Then why can't I use Bluetooth, iSight or Key backlighting (which only works through LabTick). Given the fact that the hardware test shows no problems I am not comfortable with the idea of taking it to repair. There MUST be something I can actually do to fix these issues.
    Does anybody have any idea? I repeat, these are NOT WORKING, NOT FOUND AND NOT AVAILABLE.
    - Keyboard Backlight (Only works through LabTick)
    - iSight Camera (Not found by any software)
    - Bluetooth (No info appears on the system profile, the icon on the menu bar is completely gone)
    All three issues happened at the same time, the night before everything was working perfectly fine.
    If anyone could help... please!!!
    Summary:
    MacBook Pro Mid 2010 (http://support.apple.com/kb/SP583) Unibody, can't take out the battery.
    Solutions tried:
    - Reset SMC: Turning on while holding Shift + Ctrl + Option + Power Button (This makes my MacBook forget about the battery and start up with really loud fan noise, battery icon appears with an X on it, keyboard backlight buttons work, they show brightness level on screen, but the actual light won't work, no bluetooth, no isight)
    -Reset PRAM and NVRAM: Turning on while holding Option + CMD + R + P (I have waited for 2 chimes, 3 chimes and 4 chimes at different times, nothing happens. Light, bluetooth and isight are still gone)
    -Holding Power Button for 10 seconds, 20 seconds, longer... nothing changes.
    -Creating and logging in as new admin user, nothing changes.
    -Deleting the bluetooth.plist file and powering off and on again, also rebooting
    -Deleting the SystemConfiguration folder, powering off and on again, also rebooting
    -Installing "blueutil", didn't help at all, turned it off via terminal with command blueutil off.
    -Performing Apple Hardware Test - Shows no erros or problems on any area after one full hour of testing (Performed the extended testing)
    -Leaving it powered off overnight
    Please anyone help meee!! I can't afford going crazy!
    Thank you so much in advance!
    Alvarock.

    ****UPDATE***
    Hi guys i got across this forum after searching for bluetooth, front camera and the most ANNOYING no lost keyboard backligth.
    After run all the test, procedures, tweeks and, and everything i remenbered that once i sent my MBP to repair at you bring i break, turns out that the little ribbon flex connector coming from the mother board ( from the rigth to left) was loose since the adhesive wich they used shrink do temp changes, anyhow y popped out the glas and found the flex cable totally sticked to the glass pulling out of the pcb board connector, reinstalled it smoothly and that FIXED the camera, bluetooth and keyboard backlight!..
    thats it. hope i helped some frustraded owner.

  • I've tried everything to get my keyboard backlight to work, but it won't!

    Hi guys,
    I know this subject has come up before, and I've tried all the suggestions given (ie re-booting, pulling the battery etc). When I pull the battery or re-boot, the backlight will work, but only for a few seconds and then dims again. Every now and again it will come on randomly, but none of the solutions I've found so far have worked for my Curve 9300.
    Where do I go from here?? Help would be much appreciated!

    I was trying to download TinyUmbrella because some people have said it basically kicks phones out of recovery mode, and I did try that but it hadn't worked, it kept loosing connection with the phone even though it was connected.
    I took the phone to the O2 shop and they did something to restore it, so it's working fine finally thanks for replying!

  • Keyboard Backlight not working anymore.....please help.

    After installing Boot Camp 2.1, I can't get the keyboard backlight to work anymore. I am in the darkest of dark rooms. Pressing F8 just shows an attempt to turn it on but it has a circle with a line through it.
    I am running Windows Vista 32-bit SP1.
    Are there drivers I can install manually?
    Thanks.

    Here is something funny. I rebooted with the room completely dark. When Windows came back, the keyboard was backlit. But, when I turned the lights on, the keyboard stayed backlit. And, even better (or worse), when I rebooted again, the keyboard just stayed backlit even to the point where I was choosing between booting into OS X or Windows. That is crazy! I don't know what is going on anymore.

  • MY BACKLIGHT ISNT WORKING I JUST GOT THIS THING!!

    I bought my 4th gen 8G in october, about a month later the backlight stopped working i tryed everything. So i sent it in for repairs it came back saying it got water damage....NOT POSSIBLE. iv used it maybe 3 times and i was in bed. Iv been out of town for a month and i forgot it here, its barley been touched. WHAT DO I DOOOO?!! PLS HELP ME!
    Message was edited by: BACKLIGHT PROBLEMS!!

    No water damage will show up to Apple you have voided any warranty you may have

  • T400 Backlight Not Working

    I got a Lenovo T400 and the backlight stopped working (LED). Anyone have any ideas?

    I am having a weird problem where every 1/8 or so LEDs is not working - it looks like a bad solder joint deal.  At the bottom of my screen I get a row of dark shadows that are evenly spaced apart.  I took this to a shop to fix a year ago, but now it's back.  If i pinch the lower right hand corner of the screen, the shadows will temporarily go away.  
    My computer is out of warrenty, should I just go ahead and open it up with a solder gun?
    Also, the pics you have of the screen would be great, so I can see what I'm looking for.  

  • FOR ALL ENTRIES IN  comando doesent work !!!

    Dear all,
    I have here a problem with my select. I dont know why it doesent work. In the table gt_struc1 I have 2 entries.
    This entries are also in BSAD availible.
    belnr
    bukrs
    gjahr
    are the same in  gt_struc1 and in BSAD
    TYPES: BEGIN OF ts_struc1,
                   bukrs        TYPE bukrs,
                   gjahr        TYPE gjahr,
                   belnr        TYPE belnr_d,
                   prctr        TYPE prctr,
           END OF ts_struc1.
    DATA: gt_struc1    TYPE TABLE OF ts_struc1,
                lt_tabelle      TYPE REF TO data.
    *       BSAD
            CREATE DATA lt_tabelle TYPE STANDARD TABLE OF BSAD.
            ASSIGN lt_tabelle->* TO <ft_itab>.
    *       Get data from DB
            SELECT * FROM bsad INTO TABLE <ft_itab>
            FOR ALL ENTRIES IN gt_struc1
              WHERE belnr EQ gt_struc1-belnr AND
                    bukrs EQ gt_struc1-bukrs AND
                    gjahr EQ gt_struc1-gjahr.

    The gt_struc1is correct see blow:
    * Über alle Datensätze
      LOOP AT lt_content
      ASSIGNING <fs_current_set>.
    *   Ab welche Zeile
        CHECK sy-tabix >= pa_zeile.
    *   Spliten der Daten
        SPLIT <fs_current_set> AT ';' INTO ls_struc1-bukrs
                                           ls_struc1-gjahr
                                           ls_struc1-belnr.
    *   Siehe Selektionskriterien
        CHECK ls_struc1-bukrs IN pa_bukrs[].
        CHECK ls_struc1-gjahr IN pa_gjahr[].
        CHECK ls_struc1-belnr IN pa_belnr[].
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            input  = ls_struc1-belnr
          IMPORTING
            output = ls_struc1-belnr.
        APPEND ls_struc1 TO gt_struc1.
      ENDLOOP.
    Edited by: handeglo on Feb 26, 2010 10:29 AM

  • When i click on firefox it loads but then nothing comes up and it doesent work

    When i click on firefox it loads but then nothing comes up and it doesent work

    Is the Windows 8.1 system you posted from the one with the problem, or is the problem on a different system? In that case, I assume it's also Windows.
    Does Internet Explorer work normally or are all browsers affected?
    Did this problem start shortly after any software changes, such as:
    * Windows update
    * installation of new software
    * updates to add-ons
    In case the problem is your firewall configuration (for firewall software that blocks programs from accessing the internet), please see: [[Configure firewalls so that Firefox can access the Internet]].
    In case the problem is unwanted software or malware, please see: [[Troubleshoot Firefox issues caused by malware]].

  • Macbook pro late 2008 (unibody) backlight not working, trackpad issue

    Hi,
    My wife is running 10.7.4 (Lion) on a MacBook Pro late 2008, first gen unibody. There is two issue with her computer.
    The first issue is that the backlight keyboard is not working correctly. In fact, it is not working at all. My assumption is that it stopped working when it had a a display assembly replacement in 2010. My wife not behing to technical realized she did not had this feature when I bought a MBA 13" last year. It could be something with the system (OS) but I'm pretty sure it is not. I open the back of the case to see if something (a missing wire connectivity) could be found, but none step to my eyes. I did not want to dismantle everything in case I'll be making it worst!
    The second issue is the trackpad. She told me many times that her mouse was not working as expected, and when I looked at, I finally found that the problem was not the mouse, but the trackpad. What I found is that the trackpad button, sometimes, stayed pressed. If that happen, eventually, the mouse is acting very trangely! My wife never uses the trackpad, so I can't figure out it is an abuse of it. To temporaly resolve the issue, I dissabled the trackpad when a mouse is connected in the Universal access system pref.
    I plan to have it send to the Apple store next time I go near one. The Apple Care is expired...
    My questions are:
    any idea of what may be the problem and is it repairable easily by myself?
    Could it be that the trackpad is broken in anyway?
    Could it be possible that the technician forgot to reconnect a cable near the keyboard (under the motherboard) that prevent the backlight to work?
    Thanks

    Hi,
    My wife is running 10.7.4 (Lion) on a MacBook Pro late 2008, first gen unibody. There is two issue with her computer.
    The first issue is that the backlight keyboard is not working correctly. In fact, it is not working at all. My assumption is that it stopped working when it had a a display assembly replacement in 2010. My wife not behing to technical realized she did not had this feature when I bought a MBA 13" last year. It could be something with the system (OS) but I'm pretty sure it is not. I open the back of the case to see if something (a missing wire connectivity) could be found, but none step to my eyes. I did not want to dismantle everything in case I'll be making it worst!
    The second issue is the trackpad. She told me many times that her mouse was not working as expected, and when I looked at, I finally found that the problem was not the mouse, but the trackpad. What I found is that the trackpad button, sometimes, stayed pressed. If that happen, eventually, the mouse is acting very trangely! My wife never uses the trackpad, so I can't figure out it is an abuse of it. To temporaly resolve the issue, I dissabled the trackpad when a mouse is connected in the Universal access system pref.
    I plan to have it send to the Apple store next time I go near one. The Apple Care is expired...
    My questions are:
    any idea of what may be the problem and is it repairable easily by myself?
    Could it be that the trackpad is broken in anyway?
    Could it be possible that the technician forgot to reconnect a cable near the keyboard (under the motherboard) that prevent the backlight to work?
    Thanks

  • One month free doesent work

    i have applied for the one month free but it doesent work i cant make calls abroad. but it says that the order is deliverd.

    Hi,
    Your subscription has been activated.
    It includes calls to following destinations only:
    Argentina
    Australia
    Austria
    Belgium
    Canada - (incl. mobiles)
    Chile
    Croatia
    Czech Republic
    Denmark
    Estonia
    Finland
    France
    Germany
    Greece
    Guam
    Hong Kong SAR - (incl. mobiles)
    Hungary
    Ireland, Republic of
    Israel
    Italy
    Japan
    Korea
    Luxembourg
    Malaysia
    Netherlands
    New Zealand
    Norway
    Poland
    Portugal
    Puerto Rico
    Russia - St Petersburg
    Russia - Moscow
    Singapore - (incl. mobiles)
    Slovakia
    Spain
    Sweden
    Switzerland
    Taiwan
    Thailand - (incl. mobiles)
    United Kingdom
    United States - (incl. mobiles)
    Venezuela
    If my answer helped to fix your issue, mark it as a Solution to help others.
    Thank You!
    Please send private messages only upon request.

  • Getting keyboard backlight to work with vista

    when i boot into vista, i don't have usability of the alternate functions of the F keys, or the dvd eject, with the exception of num lock. is there a way to use these functions?

    first try installing the new drivers from the Mac Support website, or try to reinstall the drivers on your original Mac OS X install disc 1 CD.
    If that doesn't work, Dmitri has developed a beta 3.0 software that enables the keyboard backlight to work, and you would also be able to adjust the sensitivity too, which i thought was definitely a great feature:
    link: http://dmitri.v.googlepages.com/macbooktraytools
    Good luck.

  • When ever i turn cellular data off then back on my mobile internet doesent work why does this happen?, when ever i turn cellular data off then back on my mobile internet doesent work why does this happen?

    when ever i turn cellular data off then back on my mobile internet doesent work why does this happen?, when ever i turn cellular data off then back on my mobile internet doesent work why does this happen?

    You only asked the question 4 times.  You have to repeat it at least 10 times to get an answer here, and then only if you supply useful info about your phone.

Maybe you are looking for