Backlight goes off... but only on higher brightness. What does this mean?

I have an early 2008 13" macbook and all of a sudden, the backlight went off. I can still see the screen using a flashlight. I tried resetting the PRAM and holding the power button for 5-10 seconds with battery out and power cable unplugged. Nothing. I figured out that bringing the brightness down all the way and then back up a notch turns it back on. But unless I keep the brightness at 1-4 notches, the light goes off after 10-30 seconds. At this point, I have no idea what to do.

Have you tried resetting the SMC as well as the PRAM? Here is the link...
http://support.apple.com/kb/HT3964

Similar Messages

  • I need to reinstall OX and my iMac only shows backup drive what does this mean?

    I need to reinstall OX and my iMac only shows backup drive what does this mean?

    Your hard drive has probably failed.

  • Almost all my songs are marked 'Exceeded limit' when i only have 13k songs. what does this mean?

    I only have 13,ooo songs. only about 40 matched. most say Exceeded Limit and have a little dotted cloud.
    does this mean they're not in the could? i have the song title listed in my phone with match on, but there is no cloud there to download it.
    how do i get these songs to upload and or match?

    Hi,
    Try signing out of iTunes Store / match. Close iTunes. Reboot computer. Open iTunes, sign into iTunes Store the match. You will be asked to add this computer. Select this and let match go through the complete match process.
    If this does not work, close iTunes and find cookie for iTunes which you will find it in safari's cookie. Delete this cookie and close safari. Reopen iTunes and turn on / update matched. You will be asked to sign in.
    If this does not work, try creating a new library by holding ctrl key whilst launching iTunes. You will get a pop up box - select create new library. This will be blank. Sign into iTunes Store then match, you will be asked to add this computer.
    This will now display all your music in the cloud. If you see any track with cloud status limited exceeded, delete tracks.
    Now sign out and try step one again.
    Jim

  • I just bought a new nano today and I'm trying to download music to it from my itunes account but when I connect it to my computer a window appears and says an ipod has been detected but not identified properly. What does this mean?

    How can I get my ipod nano connected to itunes?

    What you have on your computer is your iTunes library, not an "account." 
    Did you download and install the latest version of iTunes, which is available here?
    https://www.apple.com/itunes/
    If you have an earlier version, it may not support the most recent iPod nano, which could explain why Windows does not have the device driver to identify it.

  • Only Update Checked Songs ??? What does this mean?

    Hi, I was looking at my iPod preferences, and see the option "Only Update Checked Songs" What does this mean exactly? Has anyone figured it out yet?
    I searched the iTunes help file and it just listed stuff about Podcasts.
    Thanks in advance for your answers.
    D

    OK, my daughter and me both have iPods and only 1 computer to update them, I don't like alot of her music, I was hoping for a way to keep the automatically update setting on my iPod - so when new music was added to my library it would automatically copy those songs to my iPod, but if I didn't like them I could uncheck the songs and after the next update those songs wouldn't be on my iPod anymore.
    When we became a two iPod family, I did use the manual update on my iPod for awhile but it became a pain to remember which songs I just added to the library and copy those songs to my iPod.

  • If a buddy's screename is faded (in the offline section), but a video icon is still next to the screename, and if you right click on the name "video chat" is an option, what does this mean? it is the only one on my whole list that has this.

    if a buddy's screename is faded (in the offline section), but a video icon is still next to the screename, and if you right click on the name "video chat" is an option, what does this mean? it is the only one on my whole list that has this.

    Hi,
    It could be some sort of "flagging" issue where either the AIM Servers have gone out of sync and you are getting two lots of info  (There are about three or four servers involved with getting data to your Buddy list)
    I can also see the possibility where you have a Contact in your Address Book who has two Screen Names.
    You have one in one group and in another they appear to be Off Line.  However iChat will still Link them and Show their Capabilities when you Right Click.
    One way of checking this is to double click them to open a Text Chat Window.
    At the top is the Recipients Bar  (See View Menu when  Text Chat is Open).
    This gives you the option to chose a different Buddy Name if the contact has two  (It offers To and From options if you both have Multiple Accounts).
    Pic of an Old Chat to someone with Multiple "Names"
    They have an @Mac.com name and  Jabber ID  (As it is an Old Chat the Jabber one is Off Line and their @mac.com name is currently "Away"
    You can see I have a Google and three AIM Logins I could use to Speak to them.
    9:48 PM      Sunday; December 4, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HT201272 Some songs are greyed out while others are black. What does this mean and how can I change it? I'm tired of only 2 or 3 songs from an album repeating while the others disappear off the "Up next".

    Please help....I hate iTunes to begin with. Especially the latest they have come up with. Layout drives me crazy. And now....I find maybe a couple of songs in an album as "black" and the other titles are greyed out. What does this mean? I find it very frustrating as the black titles will repeat but the others seem to just disappear off the "play next" list. How can I fix this? And no...downloading from iCloud hasn't helped any.

    This sounds like you have some unchecked tracks. These are skipped during track to track playback. The track names are slightly greyed out in the album view. You can normally see the check boxes from the Songs view or you can change the status via the rght-click context menu.
    tt2

  • I canceled my month to month Extension Builder plan but "Withdrawn: active on September 27, 2014 " under the product, What does this mean? Is it going to be reactivated on September 27, 2014?

    I canceled my month to month Extension Builder plan but "Withdrawn: active on September 27, 2014 " under the product, What does this mean? Is it going to be reactivated on September 27, 2014?

    I canceled my month to month Extension Builder plan but "Withdrawn: active on September 27, 2014 " under the product, What does this mean? Is it going to be reactivated on September 27, 2014?

  • I just purchased FormsCentral but according to your site it is going to be closed on June 22. What does this mean for what I paid? Do you have an alternative program to use? Do I receive my money back?

    I just purchased FormsCentral but according to your site it is going to be closed on June 22. What does this mean for what I paid? Do you have an alternative program to use? Do I receive my money back?

    Kim,
    When you say you just purchased Formscentral exactly what do you mean? Formscentral has not been sold as a stand alone product in a while due to the decision to close the service. If you got Formscentral as part of a Acrobat subscription then you need to know that that part of the subscription will go away partially in June and fully in July. If you have indeed managed to purchase Formscentral standalone recently can you please give me the information about your purchase such as the date of purchase and link to the site from which you purchased. Refunds are available to customers who are not able to use the service though their contract period.
    Andrew

  • What does this mean "We apologize for the inconvenience, but the ability to order books and prints is no longer supported in iPhoto 5. Please upgrade to a newer version of iPhoto to order these products.

    what does this mean "We apologize for the inconvenience, but the ability to order books and prints is no longer supported in iPhoto 5. Please upgrade to a newer version of iPhoto to order these products." I want to buy a photo book and that message keeps popping up.

    TD, LN - You guys make great points and I will take you at your word. Normally, I would not hesitate to update. I have a lot at stake here with a large vacation coming up with a great many new pictures anticipated. I don't know enough to understand what is meant by "verifying my library." Please give me some insight there and I will start the upgrade process tonight! Seriously, I have wanted to do this for some time, but have been scared away by reading too many situations on these forums.
    TD - you have a good sense of humor. I know all versions eventually need to be left to die away. Support is not eternal. I am sure I missed the announcement that certain versions of iPhoto would no longer offer the ability to conveniently make cards, calendars, books, etc. Like the original poster, I was surprised to learn my version did not offer that functionality only by requesting it and getting denied. Sort of frosted me at the time, as you can tell by my original reply here.
    If anyone can help me with the "verifying" question, I'll get off of here and let the original poster have his thread back! 

  • Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2008 iMac which is running 10.6.8. What does this mean?

    Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2007 iMac which is running 10.6.8. What does this mean? I've attached some screen shots below.
    Also experiencing some funky issues with my wireless keyboard. With new batteries, it will just stop functioning. Certain keys intermittently won't work. Also the fans go on as soon as I turn the computer on - some times they stay on and sometimes they don't. Ever since upgrading the operating system - I've been having many issues with this iMac. Not happy. Any answers out there?

    Thanks for your reply LexSchellings, There is no disc in the drive and I went through the suggestions you put forward on the phone with Apple support without any luck. I can put a disc in but it pops straight back out again without registering on finder.
    The idea of using an external drive was to enable me to avoid the cost and loss of productivity whilst machine in repair... if I have to take it in to get the old drive removed than I might as well have a new internal drive put in, although I do worry about the reliability of these apple drives given my experience with this one coupled with my limited online research ... on line forums seem to be full of people with the same problem (although perhaps searching such forums is bound to make it seem a common problem as users with perfectly working machines are less likely to post (?)) Your reply suggests that no external drive will work whilst the existing drive is in place.
    As a postscript: I do realise that this is a user forum ...my secondary question was asking if anyone knows how to put forward a case/complaint to Apple... I can't find a link on the support page that would enable me to do so and I was wondering if anyone on this user forum had any ideas/experience..

  • Downloaded Appleworks 6.2.9 for Mac Updater-2.sim but when i try to open the file i receive the message "legacy image should be updated".  what does this mean and/or entail?

    downloaded Appleworks 6.2.9 for Mac Updater-2.sim but when i try to open the file i receive the message "legacy image should be updated".  what does this mean and/or entail?

    Mavericks is not recognizing the .smi extension - on my Mac it thinks it's a RealPlayer document. You are not going to be able to do anything with this - it requires AppleWorks to be present to be updated, and you can't run AppleWorks on Mavericks (other than by the rather roundabout process of installing Snow Leopard Server in Parallels and installing AppleWorks on that, as described here).

  • Trying to erase hard drive, but get "input/output error". What does this mean? What can I do to erase my hard drive so I can reinstall?

    Hi all,
    My computer a few days ago wouldn't start up, would just stay at the gray loading screen forever. So as a result I tried to reformat the hard drive and reinstall, but I can't reinstall, until I erase the hard drive, but when I try to erase the hard drive it says the erase failed due to an input/output error. What does this mean? What can I do to fix my computer?

    The startup drive is failing, or there is some other internal hardware fault.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?

    I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?

    Since pse 9 can only use up to camera raw 6.5 and the d600 needs at least 7.3 and the d800 needs at least 6.7, you can use the
    8.6 adobe dng converter to convert those files to dng copies, which then pse 9 should open.
    8.6 dng converter
    windows
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6
    mac
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
    Note:
    If you have windows xp or vista or mac os x 10.6, then you'll need to use the 8.3 dng converter instead
    windows
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.3
    mac
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.3
    how to use the dng converter
    Camera Raw: How to use Adobe DNG Converter - YouTube
    more info on supported cameras and camera raw plugins required
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications

  • TS1369 i have a screen with the apple logo on it and a bar underneath it. it has been this way for about an hour now. what does this mean and is there a way to reset the iphone without going into the store? it isnt showing in my computer or on the itunes

    i have a screen with the apple logo on it and a bar underneath it. it has been this way for about an hour now. what does this mean and is there a way to reset the iphone without going into the store? it isnt showing in my computer or on the itunes page.

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • TS2094 After resetting the pram, the screen only shows a folder with a question mark inside.  What does this mean?

    I followed the initial steps in this post and reset pram.  After restarting, the screen just shows a folder with a question mark.  What does this mean?

    Thanks Niel, I tried using Option and nothing happened so I next tried inserting the Leopard disc and rebooting while holding C.  Nothing happened until the disc was ejected and then the folder with question mark reappeared.  I inserted the disc again and at this point and it booted OSX.  I tried to acess disc utility to repair but my harddrive wasn't listed, only the CD drive and the OS disc.  Does this mean I'm lost everything?

Maybe you are looking for

  • How do I use a Panasonic HDD Video Camera with an iBook?

    We just bought a Panasonic SDR-H40P without even thinking that there would be any problem using it with a Mac. We recorded some videos, then proceeded to try and download them to the computer only to find that they are written in .mod, which the comp

  • How can i set a global error page for all error cod

    how can i set a global error page for all error code? i don't want to leave a long list in the web.xml file.could any one help me? thanks

  • How to find a word written with two fonts...?

    Hi, I have a 200+ pages document that contains some words with the first letter in Times regular and the rest in Times italic. Is there any way to find those words in the document? Thanks

  • BDC error in Upgrade proj.

    Dear all,               I am on a upgrade proj. from 4.5 to ECC 6.0. when i check an object I got a kind of BDC error like  'ERROR TYPE  ==> 4      ( SCREEN MISSING IN TARGET SYSTEM )'  along with program name and  screen number. please advice me in

  • While installing ECC6.0 SR3 FOR LINUX an error occured

    Hi all, While installing ECC6.0 SR3 FOR LINUX an error occured. Error Details: ERROR 2008-10-12 20:38:59.866 FCO-00011  The step createSecureStore with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|