Backlight issue after Ram upgrade on Hp Folio 13

Hi guys I just changed the RAM in my HP folio 13 from 4Gb to 8GB, everything was ok except one thing: when I turned back the pc on, I don't have anymore the little lights on some keys of the keyboard, I mean for example the caps lock light, the mute button light and the wifi light.
General backlight of all the keys of keybord works well as usual. Any help please?? I didn't find anything on internet about it...
I already tried to install again synaptics drivers but nothing changed...

UP??

Similar Messages

Firmware Issue after RAM upgrade?

I have been able to reproduce a possible firmware issue:
Upgrade to 4 x 2GB plus something else (another 2 x 512MB will do).
Go to sleep mode and wake up again: fans will go mad, but they will slow down after 1-2 minutes again.
Is anybody able to confirm this? Anybody with this configuration not having this issue? (What type/manufacturer of the 2GB modules do you use?)
(several configs have been tested, it's not a matter of total memory)

This can be ruled out. It happens when the computer is at low temperature too (modules will go to about 48-54oC when running under maximum load with distributed.net-client plus Rember - no sign of additional fan activity there); when turned on and sent to sleep, the modules are at less than 30oC, same when going out of sleep mode a couple of seconds later.
AHT comes out fine, will try the SMC reset (I forgot about that - but I doubt it will help, as I tested several combinations.)

[SOLVED] multiple issues after ram upgrade

hi everyone!
2 new ram modules arrived this morning, which i hastily installed in my machine. this is where the fun starts...
issue 1: no initramfs
so the boot process starts normally it seems. i get past grub and the initramfs starts to load. thats also where it stops dead.
a little google-fu reveals that i should try and chroot from a live iso and recreate mkinitcpio. seems easy enough... but:
issue 2: cannot boot live iso
multiple tries fail, when i finally stumble upon a post mentioning that the live iso cant handle large amounts of ram that well. adding
ram=2048M
gets me one step further. but still no dice. this time she just reboots after systemd does its thing.
what seems like hours later, i manage to get to the root prompt by also adding
nomodeset acpi=off
to the kernel line. so far so good. seems my nvidia gtx 970 and nouveau dont play nice, but that seemed to solve that.
next up: chrooting and rebuilding the initramfs. following the instructions in the beginners guide, i try and mount my root partition, which leads to...
issue 3: cannot mount btrfs root partition
mkdir works fine for the mount point. no problems there. the mount command itself seems to work somewhat too, telling me that sda1 is a btrfs filesystem on an ssd (which it is). then, however, a mysterious series of lines pop up telling me that it is "calling CRDA to update world regulatory domain"...
about a dozen lines of information appear and stop dead yet again.
utterly defeated, i decide its time to do some old fashioned hardware debugging. so i swap out the ram modules (2 sets of 2), popping them in multiple configs in the appropriate slots. memtest64 runs through fine in all configurations. nothing special to be found in the bios either. the 2 sets are from different manufacturers (a-data doesnt make the original set anymore - and havent produced a new set with the same specs), though i did pay attention to the timings, clockspeed and size (everything matches on paper). ending up at the last resort: putting everything back together again as it was originally, i reboot, praying for a familiar boot sequence and maybe even a gdm login prompt. but no such luck today. i am now stuck at
issue 4: putting humpty dumpty back together again
grub loads up normally. systemd fires up and im now faced with this:
INFO task mount:172 blocked for more than 120 seconds.
Not tainted 3.19.2-1-ARCH #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
INFO task btrfs-transacti:194 blocked for more than 120 seconds.
...repeats last INFO a few times...
so that brings us up to speed i guess. im out of ideas and the interwebs dont seem to have anything more to offer with my somewhat intricate set of problems. i know most of you are tinkerers like myself, and i hope theres someone out there that can help me out. to help you help me, here are a few specs and bits of info that might be of interest:
mobo: gigabyte 990fxa-ud5
cpu: amd fx 8350
ram (old): 2x4GB a-data ddr3 2000Mhz C9
ram (new): 2x4GB avexir ddr3 2000Mhz C9
bios settings: defaults all around, except iommu is activated (iommu=pt added to kernel line to let bios handle iommu)
gpu: nvidia gtx 970
partitioning (from what i can remember - i can post exact info, if its needed):
root: 60GB SSD (btrfs)
home: 200GB SSD (btrfs)
var: 20 GB on 1TB HDD (btrfs)
storage: rest of the 1TB HDD (btrfs - i think. this may be an ext4 partition, im not 100% certain)
any help or hints are greatly appreciated!
thanks a lot in advance!
regards,
m.
Last edited by miles969 (2015-04-03 17:10:30)

thanks ewaller, but i had tried that before...
turns out the arch iso was the culprit. i found an ubuntu-gnome live usb and popped it in. surprisingly, chrooting worked fine with that iso and i managed to boot successfully after running
/usr/bin/mkinitcpio -p linux
a few minor fixes (network device names had changed) and im up and running again... with all the ram, no less!
thanks a lot again!
regards,
m.

Performance Issues after an Upgrade

Hello!
We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
1) What could be the causes/factors for the performance to degrade after an upgrade?
2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
Please let me know your thoughts on this.
Thanks,
- Krrish

There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
HTH-
Jasmine.

Performance issues after iOS4 upgrade

hello everyone,
I had notices few issues after I upgraded my iPhone 3GS:
1- The screen is not rotating (when reading e-mails of flipping photoes).
2- The resolustion has decreased big time after the upgrade. Now the photos are shown in less resolution and they look hazy.
3- my Ipod is not working.
4- I could not restore my device via the itune.
my big question is there a real tangible benifit for this new upgrade?
I really appreciate if you can help me soon
thanks.

There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
HTH-
Jasmine.

Performance issue after PT Upgrade.

Hakan and Team ,
We recently moved from PT 8.48 TO PT8.51.18 on CRM 8.8 Application.
After the upgrade, we tremendously saw big performance issues with PeopleSoft CRM Application. It freezes almost every day and all their work-force (call center representatives) go idle. It significantly impacts their productivity and eventually losing revenue.
can you please suggest few suggestion or DOC that will help us to improve performance on application and DB side.
Deatils :-
SQL SERVER 2005
Windows 2008 R2

Hi,
Performance is always a difficult one to tackle.
It can be at so many levels, DB, Appserver, Webserver, CPU, RAM, Infra, etc.
At OOW2012, David Kurtz gave a great highly detailed presentation on this subject: CON9210 - Performance Tuning for PeopleSoft Administrators
http://www.myexpospace.com/oracle2012/smupload/scloader.cfm?SCID=257daa92-a6e8-411a-9806-2c22e56687d3
See if you can apply some of the keypoints from his presentation.
Regards,
Hakan

Battery drains while sleeping after RAM upgrade

Installed 16 GB of RAM and a Hybrid/SSD 1 TB internal HD on MacBook Pro 15" mid 2012 and now the battery drains while the computer is in sleep mode, about 1-3 % per hour. Before the RAM upgrade (stock 4 GB of RAM) there was no noticeable battery drain, so I assume it has to do with the upgrade. I read that it takes more power to maintain 16 GB of RAM during sleep, so my questions are as follows:
Is 1-3% per hour normal?
Will resetting the SMC help the issue?
Does the Hybrid HD have anything to do with this?
I am not too happy about the battery drain as it happens that I don't use my laptop for some time and prior to the upgrade the loss of battery charge was not an issue at all. Is this the price I have to pay for maxing out my RAM or is there a way (resets, settings, etc) to reduce the amount of battery loss
Thanks for your input.

Hi everybody. I have the same question. I have a macbook unibody late 2008. I have recently upgraded the OS to Yosemite. In order to have a smoother functioning of the system I have immediately replaced my original 2Gb (1+1) RAM with 8 Gb (4+4). Since then, I have noticed a dramatic reduction of my battery charge during sleep mode. Now after 8 hours of sleep it goes from 100% to around 65% (before it was 95%). Is it a natural consequence of having installed a larger RAM or there could be anything wrong with my settings?
I have read a couple of articles about standby mode and standbydelay setting but this does not apply to my model of macbook.
Here is my pmset -g result:
Active Profiles:
Battery Power        -1*
AC Power        -1
Currently in use:
hibernatemode        3
acwake               0
lidwake              1
halfdim              1
sleep                20 (sleep prevented by AddressBookSour)
ttyskeepawake        1
sms                  1
hibernatefile        /var/vm/sleepimage
disksleep            10
displaysleep         2
Thanks a lot for any comment / suggestion /hint.
Bye

Mac mini won't boot after RAM upgrade.

Tried installing new RAM in my Mac Mini, 512MB stock to 2GB of Crucial. Followed the directions to a T, grounded myself the whole time.
Things I've tried so far:
1. Resetting the PRAM, no luck.
2. Holding option at start-up, shows no icon.
3. Holding shift, no luck.
4. Holding X, nothing.
How do I get it to accept a CD if it won't boot?

Welcome to Apple Discussions!
You clearly have a problem, but you don't describe exactly what that is other than that your mini won't boot after the upgrade. What happens when it starts up? Does it attempt to start and hang up on the grey or blue screens, or does it start beeping at you almost immediately after you try and start it up, and also flash the power light?
If the former, then you may have dislodged a connector while working inside the system, in which case opening it up and checking that everything is firmly connected would be the first thing to do. If the latter, then the beeping/light flashing is the system telling you it has failed the power-on self test and the pattern of beeps/lights indicates why. In your case likely the system can't find workable memory. In that instance, opening the system and ensuring that the RAM is firmly and fully seated would be a good step, and if the mini continues to fail, then replacing the new RAM with the original to test that the system will then start.
It is not likely that anything had damaged your MacOS install in the process of upgrading, thus normally no reason to need to boot to CD as a result of a RAM issue.

OT: Dreamweaver quits after ram upgrade

Anyone had this senario before. I upgraded ram from 1gb to
2gb and now
MX04 just keeps quiting on start up, lol.
I haven't done a complete reinstall of the software yet but
any ideas
why this should be happening?
All other software, Photoshop, Illustrator, Quark, InDesign
appear at
the moment to be uneffected.
Iz a weird, weird world.
Humm I was intending to upgrade to CS4 but I'm awaiting the
trial
version first.
Oh well I guess I go back to other computer for the moment.

Hi Alan I have the issue with MX04 so I don't think below
applies,
according to this line:
'The crashes do not occur in Dreamweaver 8 or earlier (Ref.
229536).'
Problem just started after I upgraded the ram from 1gb to
2gb, which
seems odd, but hey I expect anything these days. Some file
within DW I
think may have been affected by the time/date because on
reboot I had a
warning that the computers clock/date was set to March 2001
and may
interfere with some software, even weirder as I only
purchased the
computer last year, so why the clock should go back to 2001 I
don't know.
I'll try a complete reinstall and see if that clears it up,
overwrite
the corrupt file hopefully. It doesn't matter much to be
honest I was on
the verge of upgrading so I can live with it for now.
Thanks for your input.
Alan wrote:
> Technote:
>
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402776
>
> quote from technote/
>
>
> TechNote
>
> Dreamweaver CS3 crashes after Daylight Savings Time ends
>
> Issue
>
>
> Adobe Dreamweaver CS3 crashes when working with certain
PHP or ASP files in
> Code view or Design view after the clock goes back one
hour, when Daylight
> Savings Time ends. The crashes only occur when selecting
certain lines in
> Code view, or selecting certain objects in Design view.
The crashes only
> occur in files that have PHP or ASP code, intermingled
with HTML code. The
> crashes do not occur in Dreamweaver 8 or earlier (Ref.
229536).
>
>
> Reason
>
>
> The Dreamweaver CS3 WinFileCache-AD76BB20.dat file has
been corrupted by the
> time change.
>
>
> Solution
>
>
> 1. If Dreamweaver is open, quit the application.
> 2. Delete the WinFileCache-AD76BB20.dat file from the
Dreamweaver user
> configuration folder. Note that on Windows, the
Application Data and AppData
> folders are hidden by default, so verify that your
Windows Explorer folder
> options are set to View Hidden Folders. The location of
this file is as
> follows:
> * Dreamweaver CS3 on Windows Vista:
> C:\Users\[username]\AppData\Roaming\Adobe\Dreamweaver
9\Configuration
> * Dreamweaver CS3 on Windows XP:
> C:\Documents and Settings\[username]\Application
Data\Adobe\Dreamweaver
> 9\Configuration
> 3. Restart Dreamweaver.
>
>
> Keywords
>
> Code/Design view, Daylight Savings Time, Dreamweaver,
crashes
>
> TechNote Details
> Last Update: 11-05-2007
> ID: kb402776
> OS:
> * Windows XP, Windows Vista
> Permanent Link:
http://www.adobe.com/go/kb402776
>
> /q
>
>

KT3v MS6712 System Won't power up after RAM upgrade

hello this is my first posting to this forum and I hope someone might be able to help on this as I am totally stumped. I have been running my KT3V MS6712 mobo with 256MB since it was built. The manual for this mobo says it can handle up to 3GB RAM in any order or size. I have 3 DIMM slots and thought it would be more cost effective to just
purchase 1 DIMM leaving the other 2 slots free. So I decided to upgrade to 1GB and I bought a Kingston 1Gb PC2100 266MHz DIMM and installed it on my system. Now my system won't power on at all. When I press the power button on the PC, the CPU fan spins for like 1-2 seconds then stops. The system appears to be completely dead. Cos I thought the problem was down to the new RAM installation I thought better put my old 256 DIMM back, however I still get the same problem. I have tried swopping both DIMMS into different slots but still doesn't work. The system was working fine until I did the RAM upgrade. I tried resetting the CMOS by moving the jumpers around in case it was a BIOS issue, still hasn't made a difference. Dunno if its the PSU which has suddenly gone, however seems strange. There are no beeps from the system or lights flashing to indicate anything. I don't have
the D-Bracket installed either. I have also never upgraded the BIOS on this system as it has always been stable. The CPU is not overclocked. Has anyone had this problem before after a RAM upgrade? Hope I have given you enough information

Suntek is perhaps not the best of PSU makers, but a sudden collapse is not so common. You normally notice problems earlier.
I took a big beating last time I said this , but it is important that there is no power in the system when changing memory sticks.
It sounds a bit like the processor went away for holiday. Have you any data on the processor temperature? Is there any activity at all? Does the processor heat sink get warm?

Unstable Mac Mini 2011 after ram upgrade

I put in 8GB kit ram from Corsair. Every specific things is matching with Apple's requirement on ram upgrade. I got Corsair 8GB KIT DDR3 SO-DIMM, 1333Mhz. The first boot with the new ram was fine but after 10 minutes of normal using (Safari, Spotify) and testing open Photoshop CS5 it crashed.
I shut down the system and tried to take off the rams the put it in again just to make sure that they're there perfectly. Second boot, everythings seems work well but after a while, maybe 20 minutes, Safari crashed and a "crash log" is sending to Apple. Happened the same with Spotify, Photoshop when it was open. I couldn't reopen the programs so I did another reboot.
The third reboot, seems fine until 1h30min the whole system crashed, the computer is rebooting by itself and showing a message of "something is wrong with the system" so it needed a reboot.
And Safari crashed once again while I wrote this.
I hope someone can help me solve the problem. I'm running the lastest version of Lion Mountain (10.8.2), 2.5Ghz i5 mid 2011 Mac mini.

I have used Corsair RAMs on multiple Macs with
a lot of success (running a 16 gig on a 2011 Mini Server
I am currently typing this on). It may just be you got a bad
one. It happens. Depending on where you purchased
it should be no issue replacing.
You should check though to see which is bad. Put
both of the old RAM in to make sure things still work
as before. It is possible something else may be wrong.
If all is well, then swap out with one new module at a
time and see how it works. It may be just one module
(most likely).

IPhone syncing issues after iTunes upgrade

Hi
I just upgraded to iTunes 8.1.1 for Mac. During the install I got a kernel panic and had to restart. iTunes seems to be installed fine. When I connect my iPhone I get messages like "some content will not be copied to the iPhone as this computer is not authorized" or such like. So now several apps, videos and music has been wiped from the iPhone.
I tried authorizing the computer but I just get "This computer is already authorized".
there does not seem to be any particular link between the erased content. Some was purchased on the Mac and some on the iPhone, all from the iTunes store. Before I updated iTunes everything synced fine.
I can d/l the apps again direct to the iPhone but I can't find a way to get the missing music and videos back on the iPhone. Very annoying.
Would re-installing iTunes help?
Any ideas?
Thanks
Chris

Hi Chris,
Try highlighting the one of the songs that will not sync in iTunes> cilck File> Get Info, check the account name and verifying you are authorizing the computer with correct account.
If the issue persists, try removing the SC Info folder as shown here: http://support.apple.com/kb/TS1389
If you still see the issue after removing the SC Info folder, try reinstalling iTunes as shown here: http://support.apple.com/kb/HT1224
-Jason

Issue after solman Upgrade

Dears,
We were using solman 7.0, connected to ECC 5.0 server.
We configured all activities EWA,System Monitoring and all were working fine.
Now we upgraded solman to 7.01(EHP1) and R/3 to ECC 6.04 .
1 - My first concern is after upgradation it should automatically pick details but is is still showing ECC5 in product version.
We performed Read data from remote system also but still same issue.
2 - When I go to EWA or system Monitoring I only find Prd server there while in solution's logical component all dev,qas and prd servers are available.Earlier before upgrading it was showing all systems in EWA and system Monitoring.
Please suggest.
Shivam

Hello Shivam
For point #2 please look closely at the solution containing the systsem and make sure that 1) The Dev, QAS systems are included, and are highlighted greeen ( Meaning they are status "Put in Solution"). It sounds a lot like this setting is not done, therefore the systems would not show when you would try and use that solution in functions like EWA, BPMON, etc.
It sounds very much like when you create a new soltuion with PRD, QAS, DEV systems assigned, but only the PRD system is "Put in Solution" by default, so you explicitly need to right click the system in change/edit mode, and select "Put in Solution", then save.
Now why this might be the case after the upgrade, I don't have an answer, but it is worth having a check as the symptom fits this issue. I would advise you check the solution itself and ensure the DEV and QAS systems and in status "Put in Solution".
Hope this information is helpful.
Regards,,
Paul

Video will not play on Canvas or NTSC after RAM upgrade

editing on a G5 v. 10.4.11, Dual 1.8 Ghz G5 with a recent upgrade to 4GB of ram. Have an AJA IO LA
After the RAM upgrade, FCP timeline will play but video is black in the canvas and image is frozen on the NTSC. Video WILL play in Viewer but no audio.
All cables have been checked to make sure they were put back correctly - will keep checking for errors in re-cabling computer.
Have tried refreshing displays and other tests with displays. Any info would be greatly appreciated.
Thanks!

pull the ram, problem goes away? - bad ram
you can pull 2 sticks at a time to isolate which chip it is.
did you get it from a good source - Crucial.com is my favorite, OWC is popular too - both have lifetime warranty

Display problem after RAM Upgrade to MS6712

Hi there,
after a RAM upgrade (512mb to 3GB) my PC has developed a display problem. The graphics are slow / rippled and video playback is very poor. In device manager no "display adapters" are present and there is also an error mesage referring to the VIA CPU to AGP2/AGP3.0 controller not having enough free resources to run due to a conflisct with VGAsave? I've downloaded the latest VIA chipset drivers to no effect?
System info: MS6712 MB, AMD Athlon 1.25GHZ, XP SP3.0

OK, here's the info on my PSU;
It's a Powerman FSP250-60GTU(PF). Input: 230V - 5A, 50Hz. Max Output: 250W
While I had the case open I took out 2 of the RAM modules and without making any other changes everything appeared to work fine with just the 1GB, so I tried putting 1 more back in to take it to 2GB and again all seems fine? Does this indeed point to my PSU then? If so and it works fine with 2GB should I be thankfull for a 512mb to 2GB upgrade and send the 3rd module back to Crucial??
Before I posted this thread I did run a memtest from Memtest86+ with all three modules installed and it came up with NO problems?
Re Henry's post, I searched using the format of the part no on the RAM modules themselves i.e. M368L2923FLN-CB3 and it took me here:
http://www.samsung.com/global/business/semiconductor/productListNonflexTable.do?fmly_id=118&sht_id=1
Other info on printed the modules themselves: 1GB DDR PC2700 CL2.5
According to Everest my CPU temp (with 2GB installed) is: 43 degrees (MOBO 30 degrees and HD 42 degrees) - do these seem normal?

Backlight issue after Ram upgrade on Hp Folio 13

Similar Messages

Maybe you are looking for