Backlight keyboard at my classic does not work

Dear all,
i have purchased before 2 months the BB Classic..last week a small red light appears at the top left of the device, what is this? at the same time the backlight keyboard does not turn on while i am at dark enviroment.
please advise me if there is any way to fix it...
thanks
constantinos

The small red light sounds like the proximity sensor. You would normally see this when the phone app is open.
If you haven't done so yet, try just rebooting the device. If you are using a screen protector, remove it and test. If problem persists, use BBVE to test the proximity and light sensors. For more information see http://www.blackberry.com/btsc/KB35531
- Ira

Similar Messages

My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support?

My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support? Useless to say my PC didn't recognize the Ipod anymore either.

Anton, I wish I could help. I had an old iPod Classic (60 KB) as a gift but it went dead, I dropped it a few times accidentally, and it sat carefully saved until I had sufficient resources, energy and time to get the matter addressed. In my case, I actually took the thing (after making sure it was charged) to an Apple store and one of the geniuses at the genius bar at the back of the store took it and did a few things (unseen and un-noted) with his fingers and handed it to me with a sly smile. Voila, the thing was functional. I got a re-functionalized iTunes account and store access when I bought my iMac. I did lose a few tunes along the way because it didn't recognize my new iMac as the source (my old dead PC laptop), but I have a more functional memory than the iPod and recovered them all in other ways. The whole thing is humming better than ever. At over 11 gb full, I have 4.2 days worth of portable listening. Be patient; it took me four years to get musical nirvana in a pocket, but you'll get there faster. Call support.

New Apple Keyboard Launchpad F4 key does not work

New Apple Keyboard Launchpad F4 key does not work
Hi, I have now got ne new wireless keyboard because my old one broke. I connected the keyboard, the F3 key (Mission Control) functions, the F4 key, especially for Lunchpad does not work, I'm Lion on it, previously on the old keyboard I had in 2009, he occupiedwith Launchpad F5.
Have System Preferences / Keyboard / Keyboard Shortcuts reset everything goes ......... but not yet!!
Maybe someone can help me!!
Thank you
greeting

Hi,
Your migration to Lion brought over a previous hot key preferences document. And this contains one bad key that wasn't updated.
- Quit System Preferences (if open)
- Delete this document to remove a carry-over mapping error.
- Then logout
Note: That this will delete any existing modified keyboard assignments. Re-assign changes manually.
Note2: This document is in your users preferences folder.
~/Library/Preferences/com.apple.symbolichotkeys.plist
-Alan

Persian(فارسی)Keyboard on new update does not work (10.3.2)

persian keyboard does not work in 10.3.2 os unfortunately,does not some of the original persian letters like پ چ گ ژ

Thank u very very very very much, i just paused the antivirus and the updated installed the new software 4.3.3 on my iphone 3gs. thank u very much again from my heart. i was trying again and again from 2 days and always i was wasting 421mb of my data.....but at last its done thanks
Priyesh

My one year old touch screen laptop keyboard is dead - just does not work

I have a Touch smart tx2-1370us notebook. The keypad has stopped compeltly functioning. it started with a couple of letters initially and within ten days the whole key pad is dead. the touch screen is functioning but slow. The system is also getting hung again and again.
Please suggest how to make this work....
By the way, i have tried removing the battery and putting it back.. that does not work.. at least not on my tablet.
The HP Customer centre in india refused to help citing that this model is not available in India....

If it was officially unlocked by the carrier it was originally locked to, then it should have been fine.
If it was hacked in any way to make it function as if it were unlocked, then upon restore the iOS firmware failed to re-install correctly and it is now a brick - so in that case, yup, might as well toss it in the trash.

Non-apple keyboard and aperture recovery does not work

Hello all, I use a mac mini with a non-apple keyboard and I am trying to recover my Aperture database, however, although the alt and command key work in all applications, the combination does not start up Aperture in recovery mode. Anyone any ideas? Thanks.
regards,
Douwe

Hi,
Your migration to Lion brought over a previous hot key preferences document. And this contains one bad key that wasn't updated.
- Quit System Preferences (if open)
- Delete this document to remove a carry-over mapping error.
- Then logout
Note: That this will delete any existing modified keyboard assignments. Re-assign changes manually.
Note2: This document is in your users preferences folder.
~/Library/Preferences/com.apple.symbolichotkeys.plist
-Alan

I downloaded the latest itunes update and now it freezes and my ipod classic does not work

How do I get my ipod classic to work with the new I tune update it wiped out all my sons and now my ipod is blank/

Hey palmtree2001,
Lets see if we can get your iPod touch recognized and charged. Take a look at the first article to go over making sure the drivers are working properly to any third party conflicts. If you are still having issues with charging, take a look at the second article for some suggestions to get it working.
iPhone, iPad, or iPod not recognized in iTunes for Windows
https://support.apple.com/en-us/HT204095
If you can’t charge your iPhone, iPad, or iPod touch
https://support.apple.com/en-us/HT203030
Take care,
-Norm G.

The keyboard on my Macbook does not work.

I cannot login to my computer. Some random keys work like "backspace" and some of the number keys but I do not know if they are the correct keys. Please help I need to get into my computer.

Do you have a spare USB keyboard you can use to get logged in?

Nokia 3110 Classic does not work with Peltor Bluet...

Hi!
At work I must use a high quality hearing protection headset. I purchased a Peltor Bluetooth A2DP headset (which costs five times the price of the phone) and a Nokia 3110 Classic phone, which would have been a good phone if it had worked properly with the headset. The phone fails to initialize Bluetooth connection almost every time I switch the headset on. When the initialization goes right, then it usually works, but sometimes I can only use A2DP music or phone. Both cannot be used, the other function remains silent. Sometimes the music palyer software jams after bluetooth initialization so that I have to restart the phone and load factory settings. I have installed the most recent firmware to the phone.
The headset works OK with other Nokia models I have tried. Are there any new firmware updates coming which could solve these bluetooth problems?
Thanks,
Mika

I also bought a Peltor bluetooth headset. I used it with 2 different phones (n73 and n96) and had problems with the connection on both phones. For example every time I turned off the headset, I had to pair the devices again. I also have used several other bluetooth headsets with absolutey no problems. So I assumed the problem was on the Peltor headset and sent it for service. I hope it will start to work.

Updating iTunes - Keyboard does not work anymore...

I updated iTunes on both my computers today...
Now im experiencing problems on my computers:
- Keyboard on both computers does not work.
- I cant log off or shutdown computer on both computers(Have to force shutdown with powerbutton)
Now i have uninstalled iTunes and everything from Apple INC, still have the same problems...
Does anyone have a solutions to these problems....

After waiting for computer to shutdown for 30 min, I then got a bluescreen:
Driver_power_state_failure
Looked it up and seems like the new iTunes update have messed up the USB drivers on my computers...
Ive tried to reinstall the USB driver, but it does not work(just hangs)
Apple you messed up my computers with your software...
So please give me a solution to this.
Thanks!

Custom shortcuts addee via Keyboard.prefPane does not work..

Hi,
I read several sites that all refer to a way to create a shortcut for a menu command without one, ref.: <http://www.apple.com/pro/tips/keyboard.html>
However, that does not work at all for me. Never has. So what I am doing wrong? In particular, I would like to add a shortcut to open the main window of Address Book, after closing the window leaving the app running.
Anyonw could do me a run through? Cause the above mentioned procedure does not work.
Johan
PS: Oh, and in iPhoto I am not able to create a new film roll for the selected photos, even though I am following the exact procedure mentioned in Help..
PB G4 12" Mac OS X (10.4.8) 768MB

Welcome to our community
The issue is typically a matter of focus. Particularly in Firefox. In IE, when the page loads and is presented, the Flash object (your Captivate movie) is given focus. So the keyboard shortcuts work. But that doesn't happen in Firefox. In Firefox, you must first click somewhere on the Flash object to give it focus. From there forward, shortcuts work because the Flash object is now listening for them.
In every class I facilitate I demonstrated this and advise that it's a good idea to have a button on the first slide. This serves two purposes.
It forces the user to click to proceed
It keeps the first slide paused until the user is ready
Yeah, before someone comes along and says: (in an annoyingly nasal tone) Mr. Man, you KNOW there is an option in Captivate to keep it paused at the start... I'm well aware that Captivate offers this option without adding a button, but I prefer it for the reasons above.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Keyboard Backlight does not work

I just got my new 2009 13" MacBook Pro.
I have installed Vista and loaded my Boot Camp drivers.
The Keyboard Backlight does not work.
Any suggestions?
Thanks in advance!

Powerplan works great!

MacBook Pro 13-inc, keyboard backlight does not work

My keyboard backligth does not work.
I have a MacBook Pro 13-inch, early 2011 with MAC OS X Lion 10.7.3.
I already set the preferences to be on in autmatic mode with low ligth on but this did not work.
When I turn on the computer the keyboar lights on but as soon as the computer finish the log on the keyboard goes off.
I will appreciatte any advise.

Powerplan works great!

MacBook Pro Backlit Keyboard does not work

Hello all!
I recently bought a used MacBook Pro (late 2008, 2.4 GHz Core2Duo) and the backlight on the keyboard does not work. I have reset the SMC and the PRAM, I have the latest firmware (EMI and SMC) and still no luck. I am hoping this isn't a hardware issue, but what can I do to fix this?

I think there is a sensor on the top left. It looks like a little speaker thing. If you swipe your finger over it, it activates/deactivates it. I read this somewhere online. Works for me most of the time if it's not lighting up and showing the 'no/stop' symbol.

Alum BT keyboard does not work after wake up - but BT trackpad does!

Here is my set up:
MBAir 2011 model (13", i7 4GB, Lion.. all up to date)
Desktop set up (same at work and home)
- Thunderbolt display
- Aluminum Bluetooth Keyboard
- Aluminum Bluetooth Trackpad
What I do:
- Plug in the sleeping mbair into my display via thunderbolt and power cable
- Wake up using external bluetooth trackpad
- computer wakes up and external trackpad is functional (it always works)
- 7/10 times the external keyboard will not connect to enter password to get into system
     - I have tried power button banging on it for a long time and does not work
     - open mbair and type password in and remove keyboard and repair and after several tried it will work
     - then I can close mbair and use external keyboard
     - painful to do this most days at home and work
What have I tried
- PRAM, SMC reset
- remove all BT entries - trash blutooth properties files and freshly add them back
- I have tried waking using keyboard as well and it does not work
Only think I have wanted to try and have not found out is, if keyboard can reset to factory.
Yes I also have the occasionaly wifi not connecting from sleep issue

Hello
Have you noticed this problem on factory settings or only on your Windows 7 installation? Maybe its just a driver or software issue
Make also sure that latest BIOS version is installed. Look on the Toshiba website for an update:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Before you start the update, make sure that all programs are closed and you are logged in as Administrator.

Backlight keyboard at my classic does not work

Similar Messages

Maybe you are looking for