Backlight keyboard For HP Envy 4T-1100

hey
i just bought a new laptop  HP Envy 4T-1100 and i wanna replace the keyboard to a backlight keyboard ,cant find anywahere to buy one and also i cant find a manual about this laptop on how to replace it ?
i found a keyboard of HP Envy 14 ,will this work with my HP Envy 4T-1100?
This question was solved.
View Solution.

Hum, I just tried walking though the checkout process and it seemed to work. If you are still having issues I would go ahead and contact HP Support. They will be able to order the part for you. You can contact the parts store at: 1-800-227-8164
-Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

  • Backlight keyboard for W540

    who knows how can i activate the backlight keyboard for my W540... I have download all the drivers but the backlight just doesn't lit up under anykind of lighting environments.
    Thank you for your help!
    Solved!
    Go to Solution.

    How to know if you have backlit keyboard on W540?
    I'm certain I selected it in the configurator, although if the IT guy followed through and also selected it in the order is another question. But nothing happens when I hit Fn+Spacebar. Is there a way to know for sure?
    CPU-Z says my model is 20BH001XUS, if that tells anything.

  • Backlight keyboard for 20 seconds

    Hi, I am just curious about if there is any way to set macbook backlight keyboard for 20 second, because in system pref. there is only 10 and 30 seconds option. But for me is 10 seconds is not enough and 30 too much. Mayby some terminal trick? Thanks for your help

    How to know if you have backlit keyboard on W540?
    I'm certain I selected it in the configurator, although if the IT guy followed through and also selected it in the order is another question. But nothing happens when I hit Fn+Spacebar. Is there a way to know for sure?
    CPU-Z says my model is 20BH001XUS, if that tells anything.

  • Backlight keyboard for G580 laptop

    Hi
    Is there any way to get the backlight keyboard on the Lenovo G580 laptop. I need it very badly. 
    Thanks,
    Ravi

    Hi raviameer,
    I believe not. But here are the two ideas for you to consider. Buy external keyboard and plug it into your laptop. And the second thing is keyboard light. Check it out: http://www.ebay.com/itm/USB-Keyboard-Light-1PCS-Hot-LED-Pocket-Lamp-For-PC-Notebook-Laptop-Tablets-B...
    Microsoft Certified IT Professional (MCITP)

  • Back-lit Keyboard for HP Envy 4 NOT Working

    Product Name: HP Envy 4
    Serial Number: CND217PC5C
    Product Number: B4Q07PA#UUF
    I bought it a few days back. I read in the online product descriptions that there is back-lit keyboard in HP Envy 4, but mine does not seem to work. Help required
    This question was solved.
    View Solution.

    Hi,
    From the following specs, your machine does not have backlit keyboard:
       http://www.buypakistan.com/hp-envy-ultrabook-4-1014tu-p-3803.html?osCsid=6ee5ed50e80d30439ad9175be30...
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Backlight keyboard for 8470p

    Hello
    Is it possible to change the keyboard on the laptop to a keyboard with a backlight. 
    I dont understand why this is not standard on a such expencive laptop. 

    Hi,
    Not all people like backlit keyboard and don't want to pay for this. I'm using few expensive/business laptops now and two of them don't have backlit keyboard (one HP - a bit old and one Lenovo - new), each has a light (yes a light) on the top of its screen.  No available on its Service manual:
       http://www.alibaba.com/product-detail/New-Replace-For-HP-Elitebook-8560P_517025478.html
    therefore I don't think you can replace the keyboard because no zif connector for lights on the motherboard. 
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Is there a backlight keyboard for the orginal macbook

    Help

    No the only MacBook with the backlit keyboard is the Late 2008 2.4Ghz Aluminum Unibody. No other MacBook has the hardware to run a backlit keyboard.

  • Replace backlight keyboard

    Hi folks....
    I presently have a envy m6 laptop silver model.and I don't have the complete backlit keyboard...
    Could someone help me buy backlit keyboard for my envy m6 ????
    This question was solved.
    View Solution.

    Hi,
    Backlit keyboard alone won't work. You need all connectors for those lights, in short, you may need a new motherboard. What is the model of your machine ? m6 is a series of hundreds different models/products. Please use the folliwn way to find it out:
         http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Satellite U500-1FN: Would like to have a backlight keyboard

    Hi
    I have this model u500-1fn without backlight keyboard...
    If i buy a backlight keyboard for u500 will work?

    Hello
    Its depending on the mainboard The mainboard must provide a second keyboard connector with illumination because the standard connector doesnt support backlight.
    So you must remove the keyboard and check if the other keyboard is supported. If yes you can order a new keyboard from an authorized service provider with illumination and hopefully it will work.
    Another guy has replaced the keyboard on Satellite A660 and this worked:
    [Satellite A660 - Photos of backlit keyboard |http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=233069&#233069]

  • Can I buy a backlit keyboard for my HP ENVY dv7-7334ea? UK customer

    I have just purchased and HP ENVY dv7-7334ea and have just realised that the keyboard is not backlit. Can I get a replacement keyboard for it in the UK to make it backlit?

    banhien wrote:
    Hi,
    Keyboard alone won't light up, you need power from motherboard that means you may need a new motherboard too. Please check the following link to find compatible parts:
       http://h10032.www1.hp.com/ctg/Manual/c03591253.pdf
    Regards.
    Hi Banhien,
    His laptop: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03628173
    Intel HM77 chipset has the slot for the extra cable on it, so he si fine.
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Late 2011 MacBook Pro (Mountain Lion 10.8.2) backlight keyboard not functioning properly?

         I have a late 2011 MacBook Pro running OS X Mountain Lion 10.8.2 and for some reason, the automatic backlight keyboard will not funtion as it should. When I have the "Adjust keyboard brightness in low light" option enabled in settings, and I turn on the lights, my backlight keyboard stays at full brightness. Then, when I turn off the keyboard, then the lights, the keyboard does not turn on! Correct me if I'm wrong, but I am pretty sure that this was a feature in the MBP lines.

    Try a SMC reset.   Shut down the computer. Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected. On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. Release all the keys and the power button at the same time. Press the power button to turn on the computer.   Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • Can I install a SSD in a ENVY 14t-1100

    I am looking to replace the HDD that I have installed in my ENVY 14t-1100.  Can I replace the drive with a SSD?  The laptop is roughly 3 years old.
    I would like to replace it with at least a 500 gb SSD.
    thanks for the replies.
    This question was solved.
    View Solution.

    Hi,
    The answer is Yes, nearly all laptops which are less than 5 years old support SSD. Please read the following article for some ideas:
        http://www.newmodeus.com/shop/index.php?main_page=page&id=28
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Installing Windows 7 64bit on hp Envy 4t-1100

    I'am having a bit of trouble getting Windows 7 installed on my new ultrabook (Envy 4t-1100). I do not like windows 8 and wish to continue to use Windows 7. I also installed an OCz Agility 3 240GB SSD in my laptop as well
    At first I had a hard time getting the SSD to recognize in the BIOS but after some tinkering there is a setting the bios to enable CSM to allow legacy support for older OS.
    Now I can boot to CD with the Win7 install CD. It gets to the point where it ask you where you would like to install the OS but I get a message "a required cd/dvd driver is missing" I found this
    http://ava.co.uk/support/faq/general/a-required-cd​dvd-drive-device-driver-is-missing-windows-install​...
    Basically it says I need to load the driver for the CD to see my SSD. 
    So next I head over to HP's site for drivers and I have downloaded the Intel rapid storage driver and extracted it to a folder. I've installed that driver via USB Drive to no success. I've downloaded quite a few other drivers from HP's page but none of them seem to work. I'am at a loss as to which driver I need in order to get the install CD to recognize the SSD.
    The salesperson whom I ordered this from assured me I could get Win7 loaded on this thing with no problems but I have never had such a hard time just loading windows.
    This question was solved.
    View Solution.

    I managed to resolve this issue and succesfully installed Win 7 on this laptop.
    Once I converted the Win 7 Iso to Bootable flash drive and began installing it I had to hit cancel once I got the "a required driver is needed" message. Once canceled go back to the main welcome screen for the Windows installation. Unplug the flash drive from the USB port and plug it into another port. Then continue like normal. 
    One note: I started the flash drive plugged into a USB 3.0 port, removed it after canceling and plugged it into the other 3.0 port. That did not work for me. For some reason I had to go from USB 3.0 to USB 2.0 port.
    Never seen anything like it but I got it working. Thanks for all the help though!
    Hope this helps someone else

  • Can't turn off backlight keyboard in XP How long this problem will live?

    I'm using MBP 15" 2.66Ghz (late 2008 model)
    My Windows XP SP3 with Bootcamp 3.0 most of the things work well except backlight keyboard, I tried to press F5 to reduce backlight to minimun but backlight still there so annoying me even more every times I boot into Windows XP backlight will reset itself to maximum amount of light. ==" Anyone got an ideal how to solve or just waiting for Apple engineer to fix it but when I've seen this problem long long time ago.... Srry for my bad english.
    br,
    Tum

    Finally figured it out. In case anyone else has the same problem of your computer ignoring changes in the Face Tracking Utility screen, try this:
    Go to Webcam Center. Click on "Capture" then the "Source" tab, one of two discrete grey tabs just above the video screen.
    Under "Extended Settings" you have the options for face tracking: off, continuous or smart. Click it and your computer should actually hold onto this setting until you change it again!
    Good luck.
    -noknok

  • Replacement screws for HP Envy j100

    Hello. I seem to be missing two screws on the bottom panel of my HP Envy j100 notebook (purchased last year, October 2013). The screws that are missing are in the top left and top right corners (when looking at the keyboard from above). They are the screws that are next to each of the hinges and consequently, the plastic bottom of the laptop is loose. This is also causing the hinges to be loose and flimsy. They were not like this when I originally purchased the laptop. I would like to know where and how I can order some replacement screws for my Envy notebook.
    Thank you!

    Hi
    Please find the link given below with the part number.
    720559-001 Rubber Kit (includes front and rear rubber feet and display bezel rubber screw covers)
    720560-001 Screw Kit
    Manual Link
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

Maybe you are looking for

  • Windows Server 2012 R2 - ALL HF's Failing to install as "Does Not Apply to this computer"

    Hi, A general question about hot fix installs. I have multiple servers that are all Windows 2012 R2. They do not have internet connections, so I have to install the Hotfixes manually. I download the HF's from the ISO download page (https://support.mi

  • AS3 project development into Flashbuilder

    I have been using Flex3 for mxml flex RIA development and I do pure AS3 development with Flash CS3 resources, which in most cases I code in Flex Builder but test and compile in Flash AS3. Twisted I know but the reasons are simple: 1. I can't access t

  • Verizon iPhone pre-order!!

    Dear, Verizon the suspense is killing me LOL I can't wait for the Verizon iPhone is there any way you could make the pre-order date earlier?? I would feel so much better and be able to relax if I knew my pre-order was in already and just wait for the

  • How to add simple page navigation to my DS

    As usual the adobe.com help page on this was ZERO help - followed diractions and got page errors Does anyone know this... Im sure its not rocket science - i know how to do this in MYSQL php- but there is NO simple way to do this in Dreamweaver - Than

  • WSRP Conflict in SP3 vs. SP4???

    I've just completed upgrading my portal domain and application from SP3 to SP4. We also have a WSRP Producer service running under SP3. When consuming portlets from the SP3 Producer in SP3, everything appearedd to work fine. However, if we try to con