Backlight not coming on after call ended and phone returned to horizontal

Hi all. As from the title, the Iphone would not lit the backligt and get ready for use after ending the call, while the screen has gone to "sleep" and is beeing tiled down to horizontal position to be used...
I have to touch the Main button to keep usiong it.
Most of all I need is confirmation it is about hardware issue. Setting are o.k.
Looking forward for your experiences.
Cheers...

Another thing to look at. Did you initiate the call? If not, was the phone locked when you received the call. If the phone was locked when you received the call, then the phone will relock when the call is over. This is normal operation.
If you initiated the call and when you end it the phone goes dark, then that is not normal operation. Check what the previous poster said, and if necessary, go through the troubleshooting procedures, power phone off/on, reset, restore from backup or as new phone. Go as far as needed in the troubleshooting until the phone functions normally.

Similar Messages

  • L755 Backlight not coming on after sleeping

    We got a new L755 laptop and seince we got it, its doing a strange thing.  When the computer wakes from sleeping, the backlight doesnt come on, but when the computer powers on from being off, it works perfectly.  A little googling hasent turned up anyone else with this problem, so does anyone have an ideas/soloutions?
    Thanks in advance!

    I would make sure your using the latest BIOS; that would be the first place I would check.
    ========================================================
    QOSMIO - x505 q8102X
    i7-2630QM , GTX 460m , 18.4" screen @ 1680x945p

  • Just after i merged and cleaned my contacts, one contact does not appear in my caller id and messages even the contact is in my phonebook. I already tried disabling my yahoo and google accounts connected to my iphone 4 ios 7.1. stiill no luck

    just after i merged and cleaned my contacts, one contact does not appear in my caller id and messages even the contact is in my phonebook. I already tried disabling my yahoo and google accounts connected to my iphone 4 ios 7.1. stiill no luck

    Within Contacts, tap Groups at top left. Make sure all contact groups are checked to show, then tap "Done" at top right.

  • SAP is not coming up after installing Java Add-in

    Hi,
    I have installed a Java Add-in for an existing ABAP system. At the stage of "start J2EE engine" it is throwing an error message saying that Java is not coming up after 1142 seconds. I checked config tool and it is working fine. I restarted SAP. After restarting SAP, SAP is coming up and after 1 or 2 mins the disp+work is getting stopped and all the work processes are getting died. I couldn't able to understand & resolve the issue. The system is NetWeave 04. Here is the dev_w0 trace information.
    *dev_w0 trace file information*
    trc file: "dev_w0", trc level: 1, release: "640"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M
    B 
    B Thu Feb 05 12:06:29 2009
    B  create_con (con_name=R/3)
    B  *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
    [dbcon.c      4489]
    M sysno      00
    M sid        IDS
    M systemid   560 (PC with Windows NT)
    M relno      6400
    M patchlevel 0
    M patchno    247
    M intno      20020600
    M make:      multithreaded, Unicode
    M pid        4780
    M
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4780) [dpxxdisp.c   1170]
    I  MtxInit: -2 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpShMCreate: sizeof(wp_adm)          20328     (1452)
    M  DpShMCreate: sizeof(tm_adm)          2969176     (14772)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpShMCreate: sizeof(comm_adm)          290000     (580)
    M  DpShMCreate: sizeof(vmc_adm)          0     (424)
    M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 07530040, size: 3391480)
    M  DpShMCreate: allocated sys_adm at 07530040
    M  DpShMCreate: allocated wp_adm at 07531B88
    M  DpShMCreate: allocated tm_adm_list at 07536AF0
    M  DpShMCreate: allocated tm_adm at 07536B18
    M  DpShMCreate: allocated wp_ca_adm at 0780B970
    M  DpShMCreate: allocated appc_ca_adm at 07811730
    M  DpShMCreate: allocated comm_adm_list at 07813670
    M  DpShMCreate: allocated comm_adm at 07813688
    M  DpShMCreate: allocated vmc_adm_list at 0785A358
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 0785A380
    M  DpShMCreate: allocated wall_adm at 0785A388
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X 
    X Thu Feb 05 12:06:30 2009
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Thu Feb 05 12:06:31 2009
    M  calling db_connect ...
    B  create_con (con_name=R/3)
    B  *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
    [dbcon.c      4489]
    M  ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c   1283]
    M  in_ThErrHandle: 1
    M  *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9708]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server ord-sapproj_IDS_00 on host ord-sapproj (wp 0)
    M  *  ERROR       tskh_init: db_connect
    M  *
    M  *  TIME        Thu Feb 05 12:06:31 2009
    M  *  RELEASE     640
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        9893
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  255]
    M  Entering ThSetStatError
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 4780) [dpnttool.c   357]
    Kindly help me in getting the solution ASAP.
    Thaks in Advance.
    Kind Regards,
    Mogileeswar

    Your profile parameters are messed up; check your instance profile has below parameters:
    jstartup/trimming_properties = off
    jstartup/protocol = on
    jstartup/vm/home = /opt/java1.4
    jstartup/max_caches = 500
    jstartup/release = 700
    jstartup/instance_properties = $(jstartup/j2ee_properties):$(jstartup/sdm_properties)
    j2ee/dbdriver = $(DIR_EXECUTABLE)/db2jcc.jar:$(DIR_EXECUTABLE)/db2jcc_license_cu.jar
    rdisp/j2ee_start_control = 1
    rdisp/j2ee_start = 1
    rdisp/j2ee_libpath = $(DIR_EXECUTABLE)
    exe/j2ee = $(DIR_EXECUTABLE)/jcontrol$(FT_EXE)
    rdisp/j2ee_timeout = 600
    rdisp/frfc_fallback = on
    icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00

  • Jave is not coming up after SID refresh where as ABAP is Up

    Recently I completed system refresh for Solution Manager 4.0 with DB SQL Server 2005 on Duel stack and Java is not coming up after SID refresh where as ABAP is Up.
    Please advise where to check as i check Disp log and Java Dispatcher is not coming up and giving error DB connection.
    Thanks
    Sachin Sachdeva

    How did you do the refresh? What method, export with SAPINST(both ABAP and Java)?
    Post the DB connection error you are getting.
    Can you connect to configtool?
    Message was edited by:
            Derek Galt

  • CSS Service not coming up after reboot

    I installed oracle 10.2.0.2 (X86_64) on SLES 9 (x86_64) NON_RAC (single instance with ASM) and the CSS service is not coming up after reboot. If i do localconif reset then it starts up but fail after every reboot. Here is the data to debug:
    This is the tail of my $ORACLE_HOME/log/servername/alertservername.log
    2008-03-06 22:16:32.587
    [client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
    2008-03-06 22:16:32.588
    [client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
    2008-03-06 22:16:33.217
    [client(13472)]CRS-1001:The OCR was formatted using version 2.
    2008-03-06 22:17:54.615
    [cssd(13670)]CRS-1601:CSSD Reconfiguration complete. Active nodes are pune-srv-eps-02 .
    u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is accessible through oracle user:
    $ls -l /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
    -rw-r--r-- 1 epsora epsdba 364544 2008-03-06 22:16 /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
    This is the log file mentioned in above file:
    Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
    e. All rights reserved.
    2008-03-06 22:16:32.579: [  OCROSD][2546869600]utread:3: problem reading buffer
    5db000 buflen 512 retval 0 phy_offset 102400 retry 0
    2008-03-06 22:16:32.580: [  OCROSD][2546869600]utread:4: problem reading the buf
    fer errno 2 errstring No such file or directory
    2008-03-06 22:16:32.580: [  OCROSD][2546869600]utread:3: problem reading buffer
    5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2008-03-06 22:16:32.580: [  OCROSD][2546869600]utread:4: problem reading the buf
    fer errno 2 errstring No such file or directory
    2008-03-06 22:16:32.580: [  OCRRAW][2546869600]propriogid:1: INVALID FORMAT
    2008-03-06 22:16:32.580: [  OCROSD][2546869600]utread:3: problem reading buffer
    5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2008-03-06 22:16:32.580: [  OCROSD][2546869600]utread:4: problem reading the buf
    fer errno 2 errstring No such file or directory
    2008-03-06 22:16:32.588: [  OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
    2008-03-06 22:16:32.588: [  OCRRAW][2546869600]proprinit:problem reading the boo
    tblock or superbloc 22
    2008-03-06 22:16:32.588: [ default][2546869600]a_init:7!: Backend init unsuccess
    ful : [22]
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:3: problem reading buffer
    5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:4: problem reading the buf
    fer errno 2 errstring No such file or directory
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:3: problem reading buffer
    5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:4: problem reading the buf
    fer errno 2 errstring No such file or directory
    2008-03-06 22:16:32.588: [  OCRRAW][2546869600]propriogid:1: INVALID FORMAT
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:3: problem reading buffer
    5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:4: problem reading the buf
    fer errno 2 errstring No such file or directory
    2008-03-06 22:16:32.588: [  OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
    2008-03-06 22:16:32.588: [  OCRRAW][2546869600]proprinit:problem reading the boo
    tblock or superbloc 22
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:3: problem reading buffer
    5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:4: problem reading the buf
    fer errno 2 errstring No such file or directory
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:3: problem reading buffer
    5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2008-03-06 22:16:32.588: [  OCROSD][2546869600]utread:4: problem reading the buf
    fer errno 2 errstring No such file or directory
    2008-03-06 22:16:32.588: [  OCRRAW][2546869600]propriogid:1: INVALID FORMAT
    2008-03-06 22:16:32.676: [  OCRRAW][2546869600]propriowv: Vote information on di
    sk 0 [u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr] is adjusted from
    [0/0] to [2/2]
    2008-03-06 22:16:33.217: [  OCRRAW][2546869600]propriniconfig:No 92 configuratio
    n
    2008-03-06 22:16:33.217: [  OCRAPI][2546869600]a_init:6a: Backend init successfu
    l
    This is tail of my ocssd.log
    [    CSSD]2008-03-06 22:17:55.955 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a1b10) proc(0x7a4e70) pid(13754) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:17:56.455 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a3740) proc(0x7a4e70) pid(13773) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:17:56.460 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a5b10) proc(0x7a7f50) pid(13772) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:18:08.380 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:18:08.383 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:18:11.556 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7aa3c0) proc(0x7ac7d0) pid(13845) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:18:17.873 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7ad070) proc(0x7af480) pid(13828) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:44:22.700 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9850) proc(0x7a1e50) pid(14060) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:44:22.703 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a22b0) proc(0x7a9850) pid(14060) proto(10:2:1:1)
    [    CSSD]2008-03-06 22:44:25.875 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a32b0) proc(0x7a1800) pid(14077) proto(10:2:1:1)
    And this is my css.log
    Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
    e. All rights reserved.
    2008-03-06 22:17:47.404: [ CSSCLNT][2549892096]clsssInitNative: connect failed,
    rc 9
    I checked on metalink and found that this error can occur due to some old oracle references or changes in the uid of users but this is fresh install no oracle was there before and we didnt' change the OS user's uid also.
    Please let me know what else to check or SR is the only option?
    Thanks
    Daljit Singh

    Do you mean CRS rather than CSS?
    I note that your database is patched to 10.2.0.2 but your CRS is still at 10.2.0.1. Bring both to 10.2.0.3 and if that doesn't resolve the issue open an SR at metalink.
    Do not install the January CPU ... it appears to have issues with RAC that we are currently investigating.

  • Databases are not coming up after server reboot(sun solaris).

    Hi
    OS - Sun OS 5.10 local zone. RDBMS version - 11.2.0.3
    Databases are not coming up after server reboot.
    We have verified the below points.
    Cat/etc/init.d/oracle
    $ORACLE_HOME/bin/oradism file permissions are 4550.
    lock_sga is parameter set to false.
    cat /var/opt/oracle/oratab entries are set to Y
    Still Databases are not coming up after server reboot.
    Please advise.

    Hi,
    Can you post further information from alert log. Doesn't coming up, means you needs to share the information some thing about your environmente settings about kernel parameter and init$ORACLE_SID parameters details.
    That would be easy for others to look into it further to analyze things.
    - Pavan Kumar N

  • Iphone 4 front camera not working even after reboot,resets and restore.

    i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
    Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

    If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
    How to back up your data and set up as a new device
    Apple - Support - Service Answer Center

  • Anyone having problem with iphone getting not delivered message after sending picture and it really is getting delivered to recipient.

    Anyone having problem with iphone getting a not delivered message after sending pic and it really is getting delivered to recipient.

    Same problem here with and I've done everything shy of a total reset which I also find unacceptable. This problem exists on all iMessage platforms (iPhone, iPad, and Mac) so I don't see how restoring my iPhone would help the problem.

  • I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS

    I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS, unfortunately I don't have my iphone backup too.

    we have a same problem

  • I bought the apple iphone 4G J-5 from Laos and now want to use it in India using the normal Airtel SIM but am not able to make calls from the phone pla. help

    I bought the apple iphone 4G J-5 from Laos and now want to use it in India using the normal Airtel SIM but am not able to make calls from the phone plz. help

    Is this what you have? (see above?) That's what I get when I search for iPhone 4G J-5 in Google.
    If so, this is NOT an iPhone! It is NOT made or sold by Apple. You have a cheap Chinese knockoff.

  • Why ill the flash player not intialize even after disabling firewall and antivisurs software

    Why will the flash player not intialize even after disabling firewall and anitvirus software?

    Windows XP and internet exployer?  I can get the flash player to begin the
    download but stops at about 50% initalization
    Greenleaf Compaction, Inc.
    142 W. Main
    P.O. Box 265
    Hopkins, MI  49328
    Phone:  1-877-552-9369
    Fax:  (269) 793-7298
    New email address: [removed]

  • Why is my Iphone 5 NOT ringing if somebody call me and Missing Ringtones ?

    Why is my Iphone 5 NOT ringing of somebody call me and missing ringtones ?

    Hello there, Thuy Loan.
    The following Knowledge Base article offers some basics to review for the issue you're describing:
    iPhone: No ring or sound from built-in speaker
    http://support.apple.com/kb/TS1205
    and
    Phone - Learn more about iOS 7 and iPhone - Apple Support
    http://support.apple.com/kb/index?page=tidetail&product=iphone&locale=en_US&tag= Phone#TI9
    Additionally you can check your Do Not Disturb settings using this article:
    iOS: Using Do Not Disturb
    http://support.apple.com/kb/HT5463
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Login page not coming up after applying patch 12374730

    Hi ,
    Login page is not coming up after applying patch 12374730.
    OS : Solaris 10
    Application release 12.1.3
    Thanks,

    Did you apply the patch successfully with no errors?
    Yes
    Do you have any invalid objects in the database?
    NO
    Did AutoConfig complete successfully?
    Yes
    Please check Apache log files for details about the error.
    Thanks,
    Hussein

  • N7k console not responding even after proper boot, and even from rommon mode

    N7k console not responding even after proper boot, and even from rommon mode

    Try using a different application (putty) and test.  If that does not work, RMA the sup.
    HTH

Maybe you are looking for

  • Financial Reporting in 11.1.2.2 vs 9.3.3

    We are moving from HFM with Financial Reporting 9.3.3 to version 11.1.2.2.  One thing we've noticed is that when we first run a report in 11.1.2.2, it takes about 30 seconds for the report to prompt the user with the Point of View.  After that, subse

  • Save PDF to folder as JPG not working....

    I can't figure out why all of a sudden Aperture book pages exported as JPG's aren't showing up anywhere. I did change the dpi setting to 300 and have successfully exported other books recently, but today I finished a book layout and wanted to export

  • Return key now send key

    In SMS while texting my return key is now the send key with the new update. Why? How do I get the return/enter key back? Is this intended?

  • Add the custom infotype in Fast entry screen

    Dear All,                    I add the one new created the custom infotype in the fast entry screen but when am going to create the entry threw pa70 transaction in that case my table control which is been in that infotype is not in editable mode mean

  • How to change date based on prefernces

    Guys, I do have a page where I display some date in simple format. Originally this date is stored in the form of character in DD-MON-YYYY format in table while I display it on page I convert it into simple date format. I want to change my date based