Backlight on during workout
I'm using a ipod nano 5g with nike+. When I'm running I like to see my pace and my heart rate. I've put the option for backlight to always on, but after a few minutes the backlight goes out and the screen goes dark. Should it do that?
Another question is if it is possible to only have the backlight always on in combination with nike+, but else turn it off after a couple of seconds. That way when I'm running I can watch on my ipod and the other times it saves energy. Now I have to do that manually.
try the following
Dial *#7780# and enter your security code when prompted. It'll be the default 12345 unless you've changed it.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520
Similar Messages
-
Acer D255E backlight issues during boot
Having an issue with the backlight during the boot process of my netbook. Screen will go blank for 10-15 seconds before returning. This wouldn't be an issue, but it's sitting on the login screen for a good 5-10 seconds so I'd rather fix it.
This is not a KMS issue, it's the backlight. I can append "nomodeset" to the kernel line and it will still occur. If I shine a flashlight at the screen, I can still see the boot text scrolling.
Checking dmesg, the most interesting line is:
[ 6.387788] acer_wmi: Brightness must be controlled by acpi video driver
I've tried blacklisting that module with no noticeable change. I've also tried several different acpi options such as "acpi_backlight=video", "acpi_backlight=vendor", and the same with "acpi_display_output". "acpi=ht" doesn't work, however with "acpi=off" this no longer occurs (not a solution though).
lspci:
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
Full dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Jul 29 22:02:56 CEST 2012
[ 0.000000] Command line: root=/dev/sda2 init=/bin/systemd ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f494000 (usable)
[ 0.000000] BIOS-e820: 000000007f494000 - 000000007f4bf000 (reserved)
[ 0.000000] BIOS-e820: 000000007f4bf000 - 000000007f577000 (usable)
[ 0.000000] BIOS-e820: 000000007f577000 - 000000007f5bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f5bf000 - 000000007f5ec000 (usable)
[ 0.000000] BIOS-e820: 000000007f5ec000 - 000000007f5ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f5ff000 - 000000007f600000 (usable)
[ 0.000000] BIOS-e820: 000000007f600000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Acer AOD255E/JE02_PT, BIOS V3.10(DDR3) 11/17/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-through
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask 0FFE00000 write-protect
[ 0.000000] 1 base 000000000 mask 0C0000000 write-back
[ 0.000000] 2 base 040000000 mask 0C0000000 write-back
[ 0.000000] 3 base 07F800000 mask 0FF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007f600000
[ 0.000000] 0000000000 - 007f600000 page 2M
[ 0.000000] kernel direct mapping tables up to 7f600000 @ 1fffd000-20000000
[ 0.000000] RAMDISK: 7f15f000 - 7f493000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 000000007f5fe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 000000007f5fd000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: DSDT 000000007f5f1000 08DCF (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: FACS 000000007f584000 00040
[ 0.000000] ACPI: HPET 000000007f5fc000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: APIC 000000007f5fb000 00078 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: MCFG 000000007f5fa000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SLIC 000000007f5f0000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: BOOT 000000007f5ef000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SSDT 000000007f5ed000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: WDAT 000000007f5ec000 00194 (v01 INSYDE INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007f600000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007f600000
[ 0.000000] NODE_DATA [000000007f5e8000 - 000000007f5ebfff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007c800000-ffff88007e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f494
[ 0.000000] 0: 0x0007f4bf -> 0x0007f577
[ 0.000000] 0: 0x0007f5bf -> 0x0007f5ec
[ 0.000000] 0: 0x0007f5ff -> 0x0007f600
[ 0.000000] On node 0 totalpages: 521481
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8088 pages used for memmap
[ 0.000000] DMA32 zone: 509410 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007f494000 - 000000007f4bf000
[ 0.000000] PM: Registered nosave memory: 000000007f577000 - 000000007f5bf000
[ 0.000000] PM: Registered nosave memory: 000000007f5ec000 - 000000007f5ff000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007ee00000 s82880 r8192 d23616 u524288
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 513324
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda2 init=/bin/systemd ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2038236k/2086912k available (4538k kernel code, 988k absent, 47688k reserved, 4307k data, 740k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.561 MHz processor.
[ 0.003341] Calibrating delay loop (skipped), value calculated using timer frequency.. 3326.66 BogoMIPS (lpj=5541870)
[ 0.003352] pid_max: default: 32768 minimum: 301
[ 0.003425] Security Framework initialized
[ 0.003436] AppArmor: AppArmor disabled by boot time parameter
[ 0.003903] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005799] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.007037] Mount-cache hash table entries: 256
[ 0.007563] Initializing cgroup subsys cpuacct
[ 0.007572] Initializing cgroup subsys memory
[ 0.007595] Initializing cgroup subsys devices
[ 0.007601] Initializing cgroup subsys freezer
[ 0.007606] Initializing cgroup subsys net_cls
[ 0.007612] Initializing cgroup subsys blkio
[ 0.007678] Disabled fast string operations
[ 0.007688] CPU: Physical Processor ID: 0
[ 0.007693] CPU: Processor Core ID: 0
[ 0.007698] mce: CPU supports 5 MCE banks
[ 0.007711] CPU0: Thermal monitoring enabled (TM2)
[ 0.007719] using mwait in idle threads.
[ 0.009091] ACPI: Core revision 20120320
[ 0.023379] ftrace: allocating 17828 entries in 70 pages
[ 0.040277] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073293] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a
[ 0.073329] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[ 0.073329] ... version: 3
[ 0.073329] ... bit width: 40
[ 0.073329] ... generic registers: 2
[ 0.073329] ... value mask: 000000ffffffffff
[ 0.073329] ... max period: 000000007fffffff
[ 0.073329] ... fixed-purpose events: 3
[ 0.073329] ... event mask: 0000000700000003
[ 0.090227] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.110040] Booting Node 0, Processors #1
[ 0.006666] Disabled fast string operations
[ 0.123230] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.123346] Brought up 2 CPUs
[ 0.123354] Total of 2 processors activated (6652.33 BogoMIPS).
[ 0.123904] devtmpfs: initialized
[ 0.128532] PM: Registering ACPI NVS region [mem 0x7f577000-0x7f5befff] (294912 bytes)
[ 0.128532] NET: Registered protocol family 16
[ 0.128532] ACPI: bus type pci registered
[ 0.128532] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.128532] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.188435] PCI: Using configuration type 1 for base access
[ 0.190086] bio: create slab <bio-0> at 0
[ 0.193414] ACPI: Added _OSI(Module Device)
[ 0.193421] ACPI: Added _OSI(Processor Device)
[ 0.193426] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.193431] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.197266] ACPI: EC: Look up EC in DSDT
[ 0.201283] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.205327] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.206553] ACPI: SSDT 000000007f4b7790 00708 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.207973] ACPI: Dynamic OEM Table Load:
[ 0.207981] ACPI: SSDT (null) 00708 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.208408] ACPI: SSDT 000000007f4b5690 00646 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.209316] ACPI: Dynamic OEM Table Load:
[ 0.209323] ACPI: SSDT (null) 00646 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.210234] ACPI: SSDT 000000007f4b6d90 0015F (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.211232] ACPI: Dynamic OEM Table Load:
[ 0.211239] ACPI: SSDT (null) 0015F (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.211274] ACPI: SSDT 000000007f4b6f10 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.211274] ACPI: Dynamic OEM Table Load:
[ 0.211274] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.213516] ACPI: Interpreter enabled
[ 0.213526] ACPI: (supports S0 S3 S4 S5)
[ 0.213595] ACPI: Using IOAPIC for interrupt routing
[ 0.350738] ACPI: Power Resource [FN00] (on)
[ 0.351654] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.352063] ACPI: No dock devices found.
[ 0.352074] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.353084] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.354668] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.354676] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.354683] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.354692] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.354796] PCI host bridge to bus 0000:00
[ 0.354803] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.354809] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.354815] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.354821] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.354841] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
[ 0.354904] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
[ 0.354920] pci 0000:00:02.0: reg 10: [mem 0x98180000-0x981fffff]
[ 0.354931] pci 0000:00:02.0: reg 14: [io 0x60c0-0x60c7]
[ 0.354941] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff pref]
[ 0.354951] pci 0000:00:02.0: reg 1c: [mem 0x98000000-0x980fffff]
[ 0.355002] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
[ 0.355016] pci 0000:00:02.1: reg 10: [mem 0x98100000-0x9817ffff]
[ 0.355139] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.355170] pci 0000:00:1b.0: reg 10: [mem 0x98200000-0x98203fff 64bit]
[ 0.355298] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.355345] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.355479] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.355527] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.355660] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.355713] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.355784] pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f]
[ 0.355843] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.355913] pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f]
[ 0.355978] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.356049] pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f]
[ 0.356109] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.356180] pci 0000:00:1d.3: reg 20: [io 0x6020-0x603f]
[ 0.356253] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.356285] pci 0000:00:1d.7: reg 10: [mem 0x98204400-0x982047ff]
[ 0.356414] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.356453] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.356576] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[ 0.356766] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[ 0.356798] pci 0000:00:1f.2: reg 10: [io 0x60b8-0x60bf]
[ 0.356815] pci 0000:00:1f.2: reg 14: [io 0x60cc-0x60cf]
[ 0.356832] pci 0000:00:1f.2: reg 18: [io 0x60b0-0x60b7]
[ 0.356849] pci 0000:00:1f.2: reg 1c: [io 0x60c8-0x60cb]
[ 0.356866] pci 0000:00:1f.2: reg 20: [io 0x60a0-0x60af]
[ 0.356883] pci 0000:00:1f.2: reg 24: [mem 0x98204000-0x982043ff]
[ 0.356954] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.356987] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.357057] pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f]
[ 0.357213] pci 0000:01:00.0: [1969:2060] type 00 class 0x020000
[ 0.357252] pci 0000:01:00.0: reg 10: [mem 0x97000000-0x9703ffff 64bit]
[ 0.357274] pci 0000:01:00.0: reg 18: [io 0x5000-0x507f]
[ 0.357433] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.363347] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.363357] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.363367] pci 0000:00:1c.0: bridge window [mem 0x97000000-0x97ffffff]
[ 0.363380] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.363491] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[ 0.363528] pci 0000:02:00.0: reg 10: [mem 0x96000000-0x9600ffff 64bit]
[ 0.363687] pci 0000:02:00.0: supports D1
[ 0.363692] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.370004] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.370014] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.370023] pci 0000:00:1c.1: bridge window [mem 0x96000000-0x96ffffff]
[ 0.370036] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[ 0.370138] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.370158] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.370165] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.370171] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.370178] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.370213] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.370559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.370692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.371048] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.371521] pci0000:00: ACPI _OSC control (0x1c) granted
[ 0.378569] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.378737] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.378891] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.379046] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.379202] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.379366] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.379523] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.379684] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.379989] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.380009] vgaarb: loaded
[ 0.380013] vgaarb: bridge control possible 0000:00:02.0
[ 0.380137] PCI: Using ACPI for IRQ routing
[ 0.390341] PCI: pci_cache_line_size set to 64 bytes
[ 0.390459] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.390466] reserve RAM buffer: 000000007f494000 - 000000007fffffff
[ 0.390473] reserve RAM buffer: 000000007f577000 - 000000007fffffff
[ 0.390479] reserve RAM buffer: 000000007f5ec000 - 000000007fffffff
[ 0.390484] reserve RAM buffer: 000000007f600000 - 000000007fffffff
[ 0.390741] NetLabel: Initializing
[ 0.390747] NetLabel: domain hash size = 128
[ 0.390750] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.390779] NetLabel: unlabeled traffic allowed by default
[ 0.390818] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.390828] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.390839] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.400006] Switching to clocksource hpet
[ 0.418054] pnp: PnP ACPI init
[ 0.418104] ACPI: bus type pnp registered
[ 0.418980] pnp 00:00: [bus 00-ff]
[ 0.418988] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.418994] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.419000] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.419006] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.419011] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.419017] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.419023] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.419029] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.419034] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.419040] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.419046] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.419051] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.419057] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.419063] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.419068] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.419074] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.419080] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.419086] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.419223] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.477040] pnp 00:01: [io 0x0068]
[ 0.477047] pnp 00:01: [io 0x006c]
[ 0.477052] pnp 00:01: [io 0x164e-0x164f]
[ 0.477057] pnp 00:01: [io 0x0061]
[ 0.477061] pnp 00:01: [io 0x0070]
[ 0.477066] pnp 00:01: [io 0x0080]
[ 0.477071] pnp 00:01: [io 0x0092]
[ 0.477075] pnp 00:01: [io 0x00b2-0x00b3]
[ 0.477080] pnp 00:01: [io 0x0063]
[ 0.477085] pnp 00:01: [io 0x0065]
[ 0.477089] pnp 00:01: [io 0x0067]
[ 0.477094] pnp 00:01: [io 0x0600-0x060f]
[ 0.477099] pnp 00:01: [io 0x0610]
[ 0.477103] pnp 00:01: [io 0x0800-0x080f]
[ 0.477108] pnp 00:01: [io 0x0810-0x0817]
[ 0.477113] pnp 00:01: [io 0x0400-0x047f]
[ 0.477118] pnp 00:01: [io 0x0500-0x053f]
[ 0.477123] pnp 00:01: [io 0xff2c-0xff2f]
[ 0.477128] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.477134] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.477139] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.477144] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.477150] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.477155] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.477160] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.477329] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.477338] system 00:01: [io 0x0600-0x060f] has been reserved
[ 0.477344] system 00:01: [io 0x0610] has been reserved
[ 0.477351] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.477357] system 00:01: [io 0x0810-0x0817] has been reserved
[ 0.477364] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.477370] system 00:01: [io 0x0500-0x053f] has been reserved
[ 0.477377] system 00:01: [io 0xff2c-0xff2f] has been reserved
[ 0.477385] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.477392] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.477398] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.477405] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.477412] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.477419] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.477426] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.477438] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.477469] pnp 00:02: [io 0x0000-0x001f]
[ 0.477474] pnp 00:02: [io 0x0081-0x0091]
[ 0.477479] pnp 00:02: [io 0x0093-0x009f]
[ 0.477484] pnp 00:02: [io 0x00c0-0x00df]
[ 0.477489] pnp 00:02: [dma 4]
[ 0.477556] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.477624] pnp 00:03: [io 0x0070-0x0077]
[ 0.477698] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.477869] pnp 00:04: [irq 0 disabled]
[ 0.477890] pnp 00:04: [irq 8]
[ 0.477896] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.477971] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.478004] pnp 00:05: [io 0x00f0]
[ 0.478018] pnp 00:05: [irq 13]
[ 0.478088] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.478120] pnp 00:06: [mem 0xff800000-0xffffffff]
[ 0.478195] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.478290] pnp 00:07: [io 0x0060]
[ 0.478296] pnp 00:07: [io 0x0064]
[ 0.478309] pnp 00:07: [irq 1]
[ 0.478381] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.478508] pnp 00:08: [irq 12]
[ 0.478591] pnp 00:08: Plug and Play ACPI device, IDs SYN1b1c SYN1b00 SYN0002 PNP0f13 (active)
[ 0.478951] pnp: PnP ACPI: found 9 devices
[ 0.478957] ACPI: ACPI bus type pnp unregistered
[ 0.490613] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.490624] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.490636] pci 0000:00:1c.0: bridge window [mem 0x97000000-0x97ffffff]
[ 0.490646] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.490659] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.490666] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.490677] pci 0000:00:1c.1: bridge window [mem 0x96000000-0x96ffffff]
[ 0.490686] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[ 0.490699] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.490785] pci 0000:00:1e.0: setting latency timer to 64
[ 0.490795] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.490801] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.490807] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.490813] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.490819] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.490825] pci_bus 0000:01: resource 1 [mem 0x97000000-0x97ffffff]
[ 0.490831] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.490838] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.490844] pci_bus 0000:02: resource 1 [mem 0x96000000-0x96ffffff]
[ 0.490850] pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
[ 0.490857] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.490862] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.490868] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.490874] pci_bus 0000:05: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.490975] NET: Registered protocol family 2
[ 0.491194] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.492763] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.496040] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.496845] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.496853] TCP: reno registered
[ 0.496888] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.496928] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.497141] NET: Registered protocol family 1
[ 0.497179] pci 0000:00:02.0: Boot video device
[ 0.497561] PCI: CLS 64 bytes, default 64
[ 0.497690] Unpacking initramfs...
[ 0.645619] Freeing initrd memory: 3280k freed
[ 0.648253] Simple Boot Flag at 0x44 set to 0x1
[ 0.649320] audit: initializing netlink socket (disabled)
[ 0.649348] type=2000 audit(1344044611.646:1): initialized
[ 0.650151] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.654971] VFS: Disk quotas dquot_6.5.2
[ 0.655106] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.655348] msgmni has been set to 3987
[ 0.655898] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.655980] io scheduler noop registered
[ 0.655988] io scheduler deadline registered
[ 0.656146] io scheduler cfq registered (default)
[ 0.656446] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.656761] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.657026] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.657034] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.657043] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.657086] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.657093] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.657102] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.657340] intel_idle: MWAIT substates: 0x20220
[ 0.657366] intel_idle: v0.4 model 0x1C
[ 0.657372] intel_idle: lapic_timer_reliable_states 0x2
[ 0.657377] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.657457] GHES: HEST is not enabled!
[ 0.657634] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.658723] Linux agpgart interface v0.103
[ 0.658913] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 0.673701] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.673787] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.674156] mousedev: PS/2 mouse device common for all mice
[ 0.674946] rtc_cmos 00:03: RTC can wake from S4
[ 0.675230] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.675276] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.675405] cpuidle: using governor ladder
[ 0.675548] cpuidle: using governor menu
[ 0.675877] TCP: cubic registered
[ 0.676148] NET: Registered protocol family 10
[ 0.676630] NET: Registered protocol family 17
[ 0.676643] Registering the dns_resolver key type
[ 0.677148] PM: Hibernation image not present or could not be loaded.
[ 0.677169] registered taskstats version 1
[ 0.678178] rtc_cmos 00:03: setting system clock to 2012-08-04 01:43:32 UTC (1344044612)
[ 0.678339] Initializing network drop monitor service
[ 0.681784] Freeing unused kernel memory: 740k freed
[ 0.682187] Write protecting the kernel read-only data: 8192k
[ 0.688133] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.696908] Freeing unused kernel memory: 1588k freed
[ 0.703289] Freeing unused kernel memory: 640k freed
[ 0.726908] systemd-udevd[40]: starting version 187
[ 0.731830] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 0.732096] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.732419] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.733743] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 0.740113] [drm] Initialized drm 1.1.0 20060810
[ 0.743662] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.743683] ACPI: Power Button [PWRB]
[ 0.743928] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.743947] ACPI: Sleep Button [SLPB]
[ 0.744547] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 0.744652] ACPI: Lid Switch [LID0]
[ 0.744933] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 0.744953] ACPI: Power Button [PWRF]
[ 0.756097] i915 0000:00:02.0: setting latency timer to 64
[ 0.833299] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 0.833375] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.833384] [drm] Driver supports precise vblank timestamp query.
[ 0.833491] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.862865] fixme: max PWM is zero.
[ 1.143446] [drm] initialized overlay support
[ 1.162402] fbcon: inteldrmfb (fb0) is primary device
[ 1.590260] Console: switching to colour frame buffer device 128x37
[ 1.597027] fb0: inteldrmfb frame buffer device
[ 1.597032] drm: registered panic notifier
[ 1.896943] acpi device:28: registered as cooling_device0
[ 1.897639] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.897663] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 1.897750] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.035973] usbcore: registered new interface driver usbfs
[ 2.036030] usbcore: registered new interface driver hub
[ 2.038013] usbcore: registered new device driver usb
[ 2.041510] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.041620] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.041632] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.041722] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.041784] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 2.041808] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.045723] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 2.045779] ehci_hcd 0000:00:1d.7: irq 22, io mem 0x98204400
[ 2.046541] SCSI subsystem initialized
[ 2.055034] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.055957] libata version 3.00 loaded.
[ 2.059558] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.061764] hub 1-0:1.0: USB hub found
[ 2.061778] hub 1-0:1.0: 8 ports detected
[ 2.062067] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.062076] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.062108] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.062184] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00006080
[ 2.062594] hub 2-0:1.0: USB hub found
[ 2.062606] hub 2-0:1.0: 2 ports detected
[ 2.062845] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.062853] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.062884] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.062947] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006060
[ 2.063442] hub 3-0:1.0: USB hub found
[ 2.063458] hub 3-0:1.0: 2 ports detected
[ 2.063764] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.063773] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.063799] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.063867] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
[ 2.064794] hub 4-0:1.0: USB hub found
[ 2.064807] hub 4-0:1.0: 2 ports detected
[ 2.065069] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.065077] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.065104] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.065149] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00006020
[ 2.066077] hub 5-0:1.0: USB hub found
[ 2.066091] hub 5-0:1.0: 2 ports detected
[ 2.067288] ahci 0000:00:1f.2: version 3.0
[ 2.067438] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 2.067534] ahci: SSS flag set, parallel bus scan disabled
[ 2.067597] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 2.067610] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[ 2.067625] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.072121] scsi0 : ahci
[ 2.077401] scsi1 : ahci
[ 2.080638] scsi2 : ahci
[ 2.082013] scsi3 : ahci
[ 2.082537] ata1: SATA max UDMA/133 abar m1024@0x98204000 port 0x98204100 irq 43
[ 2.082546] ata2: SATA max UDMA/133 abar m1024@0x98204000 port 0x98204180 irq 43
[ 2.082551] ata3: DUMMY
[ 2.082555] ata4: DUMMY
[ 2.366818] usb 1-4: new high-speed USB device number 2 using ehci_hcd
[ 2.566765] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.567608] ata1.00: unexpected _GTF length (4)
[ 2.568011] ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60F, max UDMA/133
[ 2.568018] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.569000] ata1.00: unexpected _GTF length (4)
[ 2.569401] ata1.00: configured for UDMA/133
[ 2.569721] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
[ 2.890091] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.906266] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.906536] sd 0:0:0:0: [sda] Write Protect is off
[ 2.906548] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.906662] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.955653] sda: sda1 sda2 sda3
[ 2.956983] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.443860] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.080865] systemd[1]: systemd 187 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP; arch)
[ 4.268749] systemd[1]: Inserted module 'autofs4'
[ 4.284427] systemd[1]: Set hostname to <D225E-Arch>.
[ 4.722331] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 5.259898] systemd-udevd[99]: starting version 187
[ 5.260136] systemd-journald[101]: Fixed max_use=99.8M max_size=12.4M min_size=64.0K keep_free=49.9M
[ 5.260314] systemd-journald[101]: Reserving 22720 entries in hash table.
[ 5.530348] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 5.594552] systemd-journald[101]: Vacuuming...
[ 5.984762] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.984774] ACPI: Thermal Zone [THRM] (50 C)
[ 5.993170] ACPI: Fan [FAN] (on)
[ 6.008164] ACPI: Requesting acpi_cpufreq
[ 6.055057] wmi: Mapper loaded
[ 6.121135] ACPI: AC Adapter [AC] (off-line)
[ 6.142771] coretemp coretemp.0: Using relative temperature scale!
[ 6.316369] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x0
[ 6.345709] iTCO_vendor_support: vendor-support=0
[ 6.371317] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.387737] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 6.387775] acer_wmi: Function bitmap for Communication Button: 0x1
[ 6.387788] acer_wmi: Brightness must be controlled by acpi video driver
[ 6.388800] input: Acer WMI hotkeys as /devices/virtual/input/input7
[ 6.471410] cfg80211: Calling CRDA to update world regulatory domain
[ 6.479374] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x0
[ 6.481722] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.598136] Linux media interface: v0.10
[ 6.846985] ACPI: Battery Slot [BAT0] (battery present)
[ 6.898714] Linux video capture interface: v2.00
[ 6.940278] uvcvideo: Found UVC 1.00 device 1.3M WebCam (04f2:b1d8)
[ 6.950439] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input8
[ 6.951134] usbcore: registered new interface driver uvcvideo
[ 6.951142] USB Video Class driver (1.1.1)
[ 6.988464] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 6.988790] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
[ 6.989088] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.138145] ath: EEPROM regdomain: 0x65
[ 7.138151] ath: EEPROM indicates we should expect a direct regpair map
[ 7.138161] ath: Country alpha2 being used: 00
[ 7.138165] ath: Regpair used: 0x65
[ 7.163644] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 7.164540] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 7.165285] Registered led device: ath9k-phy0
[ 7.165311] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90021440000, irq=17
[ 7.453924] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 7.464934] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.465285] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.503962] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 7.576847] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 7.690199] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 7.929343] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 7.934282] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 8.072332] systemd-journald[101]: Received SIGUSR1
[ 11.548644] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.667730] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.770981] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.987214] wlan0: authenticate with 74:44:01:3a:8a:ae
[ 21.994069] wlan0: send auth to 74:44:01:3a:8a:ae (try 1/3)
[ 21.996123] wlan0: authenticated
[ 22.003388] wlan0: associate with 74:44:01:3a:8a:ae (try 1/3)
[ 22.007338] wlan0: RX AssocResp from 74:44:01:3a:8a:ae (capab=0x411 status=0 aid=1)
[ 22.015634] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 22.015884] wlan0: associated
[ 32.483399] wlan0: no IPv6 routers present
Last edited by Pres (2012-08-05 22:06:43)Really puzzled by this one. I've tried playing around with a ton of different acpi options. Only acpi=off prevents this from happening. Also tried upgrading my BIOS to the latest version. Tried several different distros and they all had the same issue, so it's not specific to Arch.
I've noticed the backlight stays off for exactly 10 seconds as if there is a 10 second timeout. If I could figure out where that is, might be possible to just lower the timeout. -
Problems using new nano during workouts
I bought my new nano for more capacity than my 1st gen, which still works fine. But the touch screen does not work as well for me as the clickwheel did. The best location for the nano is clipped to my waistband, and I can operate the clickwheel by feel, to change volume or skip or repeat selections, which I do frequently during long workouts. But the touchscreen goes to sleep, and in any case I can't find the controls without taking off the new nano and looking at the screen. Sweaty clothes rubbing over it also actuate the touchscreen menus sometimes. So I've given up on using it and have gone back to using my old nano. Too bad, Apple presents the new nano as a workout tool but it certainly doesn't work that way for me. I'll try to figure out some way to get rid of it and get a slightly older refurb-ed nano with a clickwheel.
I'm sitting at my computer right now with my 6th Generation Nano (Product Red) and my Ultimate Ears headphones and that adapter. I'm able to skip to the next song, return to the start of that song, pause, hear voiceover, raise the volume, lower the volume, ...Works like a champ and I've never had a problem with sweat getting into the switches when I used it with my 3rd Generation Shuffle OR with my 6th Generation Nano.
I do suggest you use Google and find a plastic docking plug for the Nano when you use it while working out. It says that about the adapter because that is what it was developed for. It will work just fine with the Etymotic. -
Ipod pauses repeatedly during workout
During time or distance workout Ipod displays and says "workout stopped, press center button to continue". This occurs randomly and repeatedly. restore Ipod, didn't help. Could this problem be in the transmitter or receiver?
HP laptop Windows XP ProThis is the third time I've used our nike Ipod kit and after about half a mile it started pausing my work out. I would hit the center button to resume and it registered another .2 mile then stopped again. I hit resume and the time began and a pace but no distance. I tried jumping around some and it still didn't work. Eventually it stopped registering pace. I just updated all the settings and the battery life was about half on my ipod. My Nike shoes are brand new.
Any help out there? -
Is there anyway to play the radio instead of music files during a Nike Plus workout session? Every time I try it stops the radio and starts playing my workout playlist.
I'm almost sure it's impossible, but it's a great feature!
-
Heart rate stopped updating during workout
I did my first workout with my watch today, an hour of circuit training. I set the workout app to constantly display my heart rate (wow, that drains the battery...but different story). It worked great the first part of the workout, then sometime in the middle, it either completely stopped measuring it (it was constantly saying "measuring"), or it said my heart rate was something like 70 (when I know it was much higher). I even flipped the watch so instead of wearing it on top of my wrist, it was on the underside. That helped a little bit, but not a ton. I'm wondering if anybody else has noticed something like this - maybe it's related to sweat or something?
I do have the same problem. it's being difficult to lock on the heart rate while riding a bike for example, I've tried to use the watch really tight or slightly loose and no luck in getting to be consistent. Apparently is harder to lock the heart rate in darker skin with this technology.
-
Change Music during workout?????
While in a workout mode, there is a option to "change Music" for some reason, when I it this, I get nothing! Am I doing somethings wrong (I thought it would go to my libary)or do I have to load songs /playlist somewhere??
THANK YOU in ADVANCE for any help you may be able to provide me.
HP Laptop DV8135nr Windows XPUnless you have Playlists on your Nano you will not be given any options when selecting Change Music. This is a faulty design, in my opinion, which I hope will be corrected in future releases. You should be able to access your Library or Albums.
Having said that. You can select an album before you begin your workout and then select Currently Playing once you initiate your Workout. But you can't change Albums or Songs once you begin a Workout, you can only change Playlists. -
Screen backlight off during 10.5 install and after reboot?
Hi there,
I'm having an interesting issue with my MBP after Leopard installation. Interestingly, it started with the actual installation itself -- when I rebooted into the install process, the backlight on the display was off and I couldn't turn it on/make it brighter with the keyboard commands. I went ahead with the install, and the same problem now happens when I reboot the machine -- the backlight is off until the OS boots fully and I'm logged into my account, and then the keyboard works to brighten the screen.
Any ideas? I've searched the forums and haven't found anything helpful...
Thanks!Hi there,
I'm having an interesting issue with my MBP after Leopard installation. Interestingly, it started with the actual installation itself -- when I rebooted into the install process, the backlight on the display was off and I couldn't turn it on/make it brighter with the keyboard commands. I went ahead with the install, and the same problem now happens when I reboot the machine -- the backlight is off until the OS boots fully and I'm logged into my account, and then the keyboard works to brighten the screen.
Any ideas? I've searched the forums and haven't found anything helpful...
Thanks! -
3g Nano -- No Music During Workout?
So, I just got a new Nano and the Nike stuff. I used it for the first time this morning and while all the running tracking stuff worked just fine (kept my pace, announced the mileage in my headphones, etc.), it wouldn't play any music through. It acts like it's playing the songs (gives the song/artist listing in the right place on screen), but the only audio I get is the mileage announcer. The Nano plays music just fine otherwise. Anyone have any thoughts?
Good news! On my run this morning, I systematically went through the only options I could think of...
1. Changed Playlists -- no effect
2. Changed Voice Announcer from Female to Male -- no effect
3. Changed Playlist again after changing Announcer -- success!
Then I even changed the Announcer back to Female and it still worked. Hopefully this is a one-time thing and I won't have to do it every time I run (if I remember, I'll update this thread with that finding), but regardless, it seems to have worked.
This doesn't address how the new armband won't accommodate the sensor you have to plug into bottom of the Nano, but that's another thread entirely -
No backlight when Leopard installer loads on MacBook Pro
The installation process starts. As soon as the language selector pops up, the backlight on the display turns off. The display is still on, I can barely see what's on it if it's on the middle of the day and sunny weather, or if I use a flashlight and point it on the monitor.
If I connect an external monitor, the backlight briefly turns on to 100% (just a short flash of light), and then turns off again. Same thing happens if I disconnect the monitor.
I've tried everything mentioned in this thread - http://forums.macrumors.com/showthread.php?t=375949. There seems to be some confusion in that thread. Some people talk about what I'm talking about -- installation -- while others discuss the backlights operation during normal operation, not installation.
It does not matter if I start from clicking the install icon in os x, or by holding down C while booting.
Any information at all on the subject would be greatly appreciated. When searching for "backlight" here on apple.com, most of the posts mentions the keyboard backlights. Perhaps "backlight" isn't the right term to google when I'm looking for issues with the display illumination?I have the same problem. Resetting the pram fixed it for me. hold down command-option-p-r immediately after turning the machine on. Keep holding those 4 keys down until you hear the start up chime twice.
hope this helps -
Apple watch workout is way off on calories
I've used the apple watch workout app and the approximate calories burned is way off from what it should be. Is there any way to calibrate it so it will be more accurate? It shows only about half the calories burned that I know it should be.
Hi poolmanrob,
Yes, there is a way to calibrate your Apple Watch to improve the results shown in Workout and Activity. By following the steps in the article linked to below, your Apple Watch will then be calibrated.
Calibrating your Apple Watch for improved Workout and Activity accuracy - Apple Support
I also recommend going through the best practices outlined below to ensure you get the best Workout measurement.
Get the best measurement
Your Apple Watch will estimate your measurements during workouts based on the information that you entered during setup, but you can further improve its accuracy using these tips:
Wearing your Apple Watch regularly can improve the accuracy of the Activity and Workout apps.
Choose the Workout that best matches what you’re doing. For example, if you're running on a treadmill, choose Indoor Run.
For GPS accuracy when you walk, run, or cycle outdoors, select the appropriate Workout and bring your iPhone. This will also help calibrate the accelerometer in Apple Watch for times when you don’t have GPS, such as during treadmill workouts or when you're running outside without your phone.
To get the most accurate heart rate measurement when you use Workout, make sure your Apple Watch fits snugly on top of your wrist. The heart rate sensor should stay close to your skin.
You can also use another heart rate monitoring device, such as a chest strap. To pair an external heart rate monitor with your Apple Watch, tap the Settings app on the Home screen, then tap Bluetooth and select it under Health Devices. Learn more about the Apple Watch heart rate sensor, its accuracy, and its limitations.
Use the Workout app on Apple Watch - Apple Support
Have a good one,
Alex H. -
The backlight of my screen doesn't on
The backlight of my screen doesn't on,the phone systerm is working, and unter the sunlight I can see the icons on the screen. I restored my phone and upgraded to ios 4.3.2 . The funny thing is the backlight was on while retoring,after that off again.
Hi leifromottawa,
Your issue does sound like a hardware fault although your mention of the backlight working during restore is interesting, the issue could perhaps be related to software on the phone causing this.
The best thing to do to check is to restore your iPhone and set up as a new device, when you complete the restore ensure you turn the automatic syncing OFF and perhaps name your phone Test iPhone to avoid confusion with any other backups.
Then test to see how its operating, if the issue remains then might be time to book in for a Genius appointment at an Apple Store.
See the below link for more informaiton
Set Up As A New Device: http://support.apple.com/kb/HT3828
Hope that this helps.
MiFFMaN -
Backlight won't dim when playing music.
Hey,
I was wondering if this is normal, or is there a way of making the backlight dim when my ipod classic is in my pocket because I don't need it there.
Thanks heaps
Message was edited by: NeoSpringyI did the following and the backlight dims during music but there is no clock.
Reset iPod classic
(if it isn’t responding)
Slide the Hold switch to HOLD and back again. Press the
Menu and Center buttons at the same time for about 6
seconds, until the Apple logo appears. -
Watching Video With BackLight Off...
Do you think that increases the video time, or by how much... ill make a test but i just got my ipod so i gotta let go through a couple charges im hearing.
you can't turn backlight off during watching video. it's factory setting on hardware. even you can't alter that setting from dignostic mode, too.
-
IPod Nano Battery Life when using Nike+
I saw this on the support site:
How much does using the Nike + iPod system affect my iPod nano battery playback time? The receiver draws very little power from the iPod nano. The overall impact on the iPod nano battery playback time is less than 5 percent.
However, I've owned my Nike+ kit for a couple of weeks now and I went from fully charged to almost empty on my battery after only 3 1-hour exercise sessions! That seems pretty insane given how much battery life the 2G nano is supposed to have. Any thoughts?
iPod Nano (2G) with Nike+ kit Other OSAre you leaving the backlight on during your workouts? If so, that's probably the culprit.
Also, do you get "normal" battery life (12-20 hours of playback, depending on EQ settings, backlight, etc.) when you're using your nano simply to play music (and not using the Nike kit)?
Maybe you are looking for
-
Cardinal spline in Crystal 8.5
Post Author: sksk CA Forum: Charts and Graphs Is it possible to draw smooth line curve - Cardinal spline - between points in Crystal Reports 8.5? And how if yes.Thank you.
-
Error while loading data to an Infocube from 0EC_PCA_1 extractor
Hi, I am trying to load data to the infocube form the extarctor 0EC_PCA_1(Profit centre:Transaction Data on Acounts).It is giving the following error. Error message from the source system Diagnosis An error occurred in the source system. System Respo
-
The body of my emails does not show up in Mozilla, but works in Internet Explorer.
-
Upgrade 5800 xm software or not ?
Hi there, I have a brand new 5800xm blue serie with software 10.0.010.blue.01 The question is should I upgrade it to version 20 ......or wait for new release ?? I learned so many problems updating the phone that now I am confuse.!!!! Why nokia is sel
-
We have 2 servers running on server 2012 as web server. we want to migrate them to our new data center. is there is any toll which migrate entire web server to another server without downtime. Akshay Pate