Backlight on my 2007 Macbook has failed!!

Hello recently my macbook backlight was flashing off depending on which way i pulled the screen, however it did still work. I have tried to replace the inverter and that hasn't made a difference, obviously it is quite an old model and unfortunately i dont have any insurance. I was wondering if there is any other way this could be remedied at a zero to minimal cost, the display is working as i can see the finder box but obviously no backlight. Any help would be appreciated.

HI I have tried all those suggestions on that site and it still has no backlight, as I've said I have tried a new inverter that also hasn't worked. I am getting video as I can see it with a torch, and I have checked brightness etc, however it isn't making a sound when I press the volume up or down button, could this be related? Is there a way to change the bulb at all? Any ideas?

Similar Messages

  • Sync from iPhone to iCal on MacBook has failed since the latest iPhone upgrade, yesterday.  It's worked in reverse, and all other sync operations appear to have worked.  Any solutions, that I may not have already tried (over and over)

    Sync from iPhone to iCal on MacBook has failed since the latest iPhone upgrade, yesterday.  It's worked in reverse, and all other sync operations appear to have worked.  Any solutions, that I may not have already tried (over and over)
    (Sorry, first time user of these forums, and it's confusing in it's own right)

    You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

  • 2007 macbook has white screen

    my macbook 2007 froze.  i turned it off.  when turning it back on got a white screen.  help!

    Reset your Mac's PRAM and NVRAM
    http://support.apple.com/kb/ht1379
    If you still have problem, boot using Safe boot mode
    *  shutdown
    *  start the Mac and *wait* for the startup chime to sound
    *  after the sound, press and hold down the shift key
    *  keep holding and *wait* until the grey  Apple logo appears
    *  now release the shift key and just wait (it could take a few minutes)
    *  eventually the login screen appears with the words SAFE BOOT

  • Macbook has failed me, rufuses to boot.

    after 10.5.2 two days ago, my macbook booted up regularly. however after the additional leopard graphics update last night, it no longer boots up at all. i have to use this ****** vista to report the problem. my macbook is right beside me, with nothing but a plain blue screen. occasionaly the mouse cursor appears for about 30 seconds, then dissapears and the screen remains blue. what can i do? if i cant log in apple cant update my mac!!! help!!!

    Maybe somebody else could help you with recovering your machine, because from your description I dont know how you would go about doing that. You could run the 'macosx install disk 1'. Just pop it in, and hold down the c key while re-booting. This will boot your macbook directly from the disk. From there you can try the apple hardware test to see if any of your hardware isnt working. You could also try re-installing leopard if it came down to it.

  • 2007 MacBook Backlight Issues?

    Hey everyone,
    My old, faithful 2007 MacBook has just encountered a spot of trouble with its backlight. The backlight is off/ on the lowest setting and unresponsive to commands via the brightness control keys and changes within system settings. When restarting the computer, the light is functional for a split second before reverting to total darkness.
    Both reseting the SMC and the PMC (?) have proven fruitless (removing battery, holding power for 5 seconds, re-inerting battery and restarting computer as well as pressing alt+option+p+r upon restart).
    I am trying to get a hold of a cable to attempt hooking it up to an external monitor to see if that works (seems some others on the forums have had luck with it). If not, will I be looking at needing some hardware replacements? Or are there other methods I can try?
    Thanks in advance for your time and help - I really appreciate it!

    Thanks for the reply - i will give them a call, alternatively will try sourcing the item my self. I have had a few problems in the past with this particular MacBook, they are as follows:
    - Keyboard Replaced (Under 1yr Hardware Warranty by a AASP, they fitted the older version keyboard with the Apple logo)
    - Bottom case replaced due to hairline cracks. (Under 1yr Hardware by AASP)
    - Hard Drive replaced (At an AASP)
    - Bottom case bezel + keyboard replaced again (AASP, fitted incorrect keyboard again)
    - Graphics related thing replaced to solve multiple colored lines vertically on screen (AASP)
    - Bottom case bezel + keyboard replaced a third time (Apple store, correct keyboard placed back on - No warranty)
    - Screen surround (white bezel) replaced (Apple Store - no warranty)
    The battery had also died at the last point, they didn't mention it at the Genious bar, but when i got it back they had given me a brand new battery (not even mentioned in the documentation)
    Is this an absurd amount of things that have been replaced within 2 years?

  • The 'L' key on 2007 Macbook stopped working

    As stated, My 'L' key on my 2007 macbook has stopped working however every other key works fine.
    If it helps it running on Lion 10.7.5
    If you have any advice, Please do share.
    Thank you in advance! Very much appericated

    dear chrisfromhopewell, I tried you advice but it still doesnt work ("L" key still not working, can you please try to help me. I am desperate...
    Many thanks
    Veedeekay

  • My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Tim

    My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
    routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
    David

    My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
    routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
    David

  • The logic board on my MacBook Pro has failed. How do I retrieve all my data from the hard drive?

    The logic board on my MacBook Pro has failed. How do I retrieve all my data from the hard drive?

    Remove the drive and put it in an external enclosure. Backup the drive completely. Repartition and format the drive. Replace the drive into the computer. Take the computer in for the logicboard replacement.

  • I can't upgrade an app on my macbook pro it says the connection to the internet has failed

    Hello
    I'm trying to upgrade a game in my macbook pro when I enter the app and says upgrade I click on it a msg shown said that the connection to the internet has
    failed and I'm using safari and everything is good

    Noura-alb,
    We've an article that can help restore your Mac's ability to connect to the App Store so that you may update your game successfully.
    OS X: "Cannot connect" or "Cannot connect to the App Store. An internet connection is required"
    http://support.apple.com/en-us/HT203811
    Cheers,
    Allen

  • I have a 2007 MacBook Pro that needs its backlight replaced. How can I get this done?

    I have a 2007 MacBook Pro that needs its screen backlight replaced.  How do I go about doing this?  I'm told it is vintage and Apple will no longer fix it.  If I am paying why not??

    Welcome to the Apple Support Communities
    See > http://pondini.org/TM/E3.html

  • Has anyone installed Lion on mid-2007 MacBook?

    I have a mid-2007 MacBook that I have not yet installed Lion on.  Has anyone installed it on a similar MacBook?  If so, how does it run? 
    I have a brand new MacBook Pro running Lion, so I am familar with it.  I am just curious if it will be really slow on the MacBook.
    Thanks.
    Thom

    I think it depends on what you need to do with the computer. I have a 2007 black macbook with 4gb ram. Most stuff works ok, although everything is noticeably slower. But some stuff, Aperture in particular, barely work at all - aperture is almost unuseably slow. So be forewarned! And please, don't believe anyone who says it'll run just as well as snow leopard - it doesn't.

  • Outlook 2007/2010 with Exchange 2010 missing tasks operation has failed only on PC not OWA

    We have searched this topic to no success I'm baffled as to how to resolve this problem.
    End user software: Outlook 2007 and Outlook 2010,
    Server side: MS Server 2012 R2 with MS Exchange 2010
    Scenario: We have merged 2 forests together to a new forest. Months before hand had rolled out exchange 2010. A majority of users in
    forest2 still are on Office 2007 where as users in
    forest1 are nearly all on Office 2010.
    Now so far we have 3 users (from Forest2) whom have reported 'missing tasks' with the message 'Operation has Failed' when attempting to view their tasks. 
    We have ran the outlook commands related to this type of issue that clear the reminders and resetting them with - No Success.
    They have no issue when using OWA, or Outlook via mobile device. The issue only occurs on PC. We have tried profile rebuilds, fresh SOE, the issue appears to be resolved but the next time the user opens Outlook the problem comes back.
    On the server we have ran all the integrity checks no corruption has been found in any way.

    Hi,
    I recommend that you try the following method on client PC and then check the result:
    Click Start >> Click Run >> Type outlook.exe /resettodobar
    >> Click OK. 
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Equium P200-178 - backlight on the display has failed

    A friend of mine has an Equium P200-178 and the backlight on the display has failed.
    Unfortunately, the machine is three weeks out of its warranty and we are very, very far from a Service Depot.
    Googling the problem indicates that the inverter may have failed but how do you get to it?
    I have removed every screw that I can see on the case but it still won't come apart. I don't want to risk breaking it.
    Any help very gratefully received!
    Cheers.

    Hi
    The FL inverter is a small part which controls the screens backlighting and its placed near the TFT screen.
    Usually its not advisable to disassemble such hi-tech notebooks because such procedure is tricky and you could damage other parts.
    However, it seems you are already on the task and the notebooks covers are already removed.
    Well, I googled a little bit and found this page:
    [Taking apart Toshiba Satellite P205 display panel and removing LCD screen and inverter.|http://www.irisvista.com/tech/laptops/toshiba-satellite-p205/take-apart-display-panel-1.htm]
    Its about P205 but its very similar to the P200 notebook model.
    But note; everything what you do is your own risk!!!!

  • Macbook Pro won't connect to internet, says ISP has failed.

    For months I have not been able to connect to my internet at home from my MacBook Pro. I have tried restarting the router many times. All of my other devices, as well as my roommates' devices connect to the internet. My wifi icon at the top says that it has connected but that the ISP has failed when I refer to the diagnostics. I've tried countless troubleshooting articles and none have worked so far. Any suggestions?

    Im going to answer my own question. Problem Fixed! After I was on the phone for over an hour with a senior advisor we found the problem was with the download or the instilation. He had me Shut Down Computer and hold down Command and R then press power button hold this down until the recovery window pops up. Then reinstall mountain lion os system. this does not wipe out documents, photos and apps like windows does. I didnt know this since Im new to MacBooks. Hopefully this may help someone else.
    PS I beleive In order to do this you need to be plugged into your router to have internet access. They had me do this. This will take about an hour but now Im up and running.

  • I was trying to update my mother's 2007 Macbook, and now safari doesn't work.  She doesn't have an installer disk.  she was operating on mac os x10.5.1 but has been updated to 10.5.8 ..any solutions

    My mom's computer is a 2007 macbook, we do not have a startup disk.  I was trying to upgrade her Mac osx, but now her safari doesn't work.   I couldn't update safari unless i updated software.  Her safari was disabling her email through hotmail--also recently updated. 
    Any suggestions.....she hates change

    Install 10.5.8 Combo > http://support.apple.com/kb/DL866

Maybe you are looking for

  • ADF Query not showing correct search results.

    Hi, I am using normal ADF af:query to search data using a VO Criteria. We have modified the getter of searched column in VORowImpl java class to return values based on NLSID search from cache. Logic in getter: If for a column_name nlsid is present th

  • IDOC Flat File-- XI-- IDOC

    Hi,    I have a requirement wherein we have to read the IDOC flat file and post it as IDOC to SAP using XI. I understand we have to use the Flat File Sender adapter and the IDOC Receiver Adapter. On the Sender Side we have to define the Content Conve

  • Problem with iPod.app

    My iPhone 3G has now decided that all of my artists, songs and albums now begin with a number, leaving me no way of quick-jumping to a certain song I'd like to hear out of 1800 Any chance of rectifying this problem? Screenshots: http://i179.photobuck

  • Is this  Bug?

    double click the "amount" In "open items list",  B1 prompt a error message, then click "OK" B1 is exit! Who have same problem?

  • Art work information

    Maybe this is not a life or death situation, but is there a way to get the Artwork info for all CDs that have been downloaded into itunes? Purchased music does it automaticaly but is there a way possibly to get it from a program such as gracenote? Su