Backlight works on startup but not after further unlocking???

As above really, turn the phone off and on again and the backlight works fine, leave it to self lock or manually lock it and the backlight will not work again.
It will flash extremely quickly when I press the home or sleep button then nothing.
Any help?

sounds like a hardware failure. You need to bring your phone into Apple for replacement.

Similar Messages

Flash video works onDreamweaver preview but not after uploaded to site

Hi,
I created a page with FW CS3 and opened it with Dream weaver.
Using Flash CS3 I created some video clips. I then inserted three
video files to the web page. In DW preview mode I can see the
videos. I copy the source code and pasted it to the index page of
my website as well as uploaded all the sit files from my hard drive
folder to the website. The page comes up but not the videos.

Search this forum for "FLASH" "UPLOAD". You'll find hundreds
of answers.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"SERocks" <[email protected]> wrote in
message
news:g11qep$n8m$[email protected]..
> Hi,
> I created a page with FW CS3 and opened it with Dream
weaver. Using Flash
> CS3
> I created some video clips. I then inserted three video
files to the web
> page.
> In DW preview mode I can see the videos. I copy the
source code and
> pasted it
> to the index page of my website as well as uploaded all
the sit files
> from my
> hard drive folder to the website. The page comes up but
not the videos.
>

GPRM Button scripts work in Simulate, but not after burning

Hello everyone:
I have a question regarding GPRM-based buttons and scripting menu navigation. My scripts work perfectly in DVD Studio Pro's simulate mode, but after building and formatting a DVD, the scripts do not function properly on a set top box, in Apple DVD Player, or when playing from the Video TS folder. The scripts were based off of a tutorial by Hal MacLean at dvdstudiopro.co.uk.
Essentially, I have one track which is accessed via a Main Menu or a Chapters Menu. There is an animation that plays at the head of each menu, so menu has a loop point. The user should return to the correct screen, the correct button should be highlighted, and the menu should jump to the loop point. All of these things happen in simulate mode, but after burning, the loop point is ignored: The correct menu and buttons are highlighted, but the menu plays from the beginning. Here is how the project is laid out:
From the main menu, if the user chooses Play Movie, the following script plays:
mov GPRM 0, 1
Jump Feature
From the main menu, if the user chooses Chapters, the following script plays:
mov GPRM 0, 0
Jump Chapters Menu
Each of the chapter buttons is assigned to the start of a scene. The feature's menu call is assigned to the following script:
mov GPRM 1, SPRM 8
div GPRM 1, 1024
Jump Main Menu(Loop) [GPRM 1] if (GPRM 0 = 1)
Jump Chapters Menu(Loop) [GPRM 1]
I was able to make the menus behave properly by writing the scripts this way:
mov GPRM 1, SPRM 8
div GPRM 1, 1024
Jump Main Menu Script [GPRM 1] if (GPRM 0 = 1)
Jump Chapters Menu Script [GPRM 1]
Main Menu Script:
Jump Main Menu(Loop)
Chapters Menu Script:
Jump Chapters Menu (Loop)
But, although the user is returned to the correct menu and the loop point, now only the default button is highlighted.
Has anyone run into the same issues? Can anyone see any flaws in my scripts, or have any suggests? i would really appreciate any thoughts you all have. Thanks for your time!

Do you have any pre scripts atached to the menus? I was having the same problems as you and found that pre scripts and GPRMs don't play nice (at least in DSP). Removing the pre scripts solved my issue.
http://discussions.apple.com/message.jspa?messageID=4643747#4643747
Good luck!

[SOLVED] broadcom-wl works during install, but not after.

I have this macbook air which I'm beating into submission, and it has a broadcom wifi chip. I followed the instructions here for the installation and it worked perfectly. After booting into my newly installed system I do the same, but when I do 'modprobe wl' it fails with:
# modprobe --verbose wl
insmod /lib/modules/3.14.5-1-ARCH/extramodules/wl.ko.gz
modprobe: ERROR: could not insert 'wl': Invalid argument
I checked with 'lsmod' and none of the blacklisted modules are loaded. I have no idea how to proceed but it should work since it worked during installation. Any pointers would be greatly appreciated!
EDIT: As user Namarrgon on irc pointed out, I needed to rebuild the broadcom-wl package. The reason it worked in the live usb and not in the installed system is probably because the installed system had a later kernel than the one on the live usb.
Last edited by l4than-d3vers (2014-06-05 11:31:35)

At least for rt2870sta, it's a retarded bug in Linux that was introduced in 2.6.31 and is still not fixed. It works in the live environment because it has an older kernel.
Kernel 2.6.31 module conflicts
The 2.6.31 kernel caused the rt2870 driver to conflict with other wireless modules. The fix in this thread says that you need to blacklist the rt2800usb rt2x00usb and rt2x00lib modules by modifying the MODULES array in /etc/rc.conf
MODULES=( ... !rt2800usb !rt2x00usb !rt2x00lib ... )

Preloader works in Flash, but not after upload

Hi all. I'm having problems with a preloader. When I test the
preloader in Flash (using the simulate download option) it works
like a charm. I publish and upload the file to the server...and
when you visit the site, you just get a blank white page until
everything is loaded. I have included the code. Please
remember...it works correctly when simulating a download in Flash,
but it does not work at all after upload. Any ideas?
Thanks for the help!

Naw...didn't work. I'm use CS3 and all the preloaders I ever
did (using the same code) in CS2 worked fine. I'm creating the .swf
using Actionscript 2.0 (not 3.0). Is there a problem when the
document gets published with CS3 which would stop the preloader
from working on the server?

HTML Redirect is working in muse but not after publishing... HELP!

I am setting up a "Coupon code" for a website I work on. I have set up a basic HTML Redirect box. It works properly in Muse but after publish it does not work correctly anymore. I understand the "password/coupon code" is available to find in the page code, and that's OK, thats the way i designed it. Here is the link to the page Ticket Center the coupon code is GOLDEN (all caps). It should redirect to: GOLDEN PROMO CODE Please let me know what i am missing. If it is not possible to use this code with muse after its uploaded, any suggestions would be helpful. Thanks!
Here is the promo code box code:
<div class="wrapper">
    <form class="form1" action="ticket-center.html">
        <div class="formtitle">
        </div>
        <div class="input nobottomborder">
            <div class="inputtext">
                Coupon Code:
            </div>
            <div class="inputcontent">
                <input type="password" id="password" /><br />
            </div>
        </div>
        <div class="buttons">
<input class="orangebutton" type="submit" value="Submit" onclick="if (document.getElementById('password').value == 'GOLDEN') location.href = 'promo-1sae452316ad.html'; else alert('Invalid Promo Code! Please try again. CASE MATTERS');" />
        </div>
    </form>
</div>

Presuming that I have 13 folders/directories that are
created by iWeb for each of the 13 'pages' in my
site, then I assume that to turn off the nav_bar, I
should paste 'the code' into each of the
[foldername].js files.
Is this correct?
I believe so, yes.
And to maintain this, I should be prepared to use
MassReplaceIt (+/-) to refresh this info after
Publishing to Folder any cosmetic and content
changes.
Yes
Before I do the 'paste', I would like verification
that:
1) it is in fact the [filename].js file that is my
correct choice/target.
Yes
2) when viewing the contents of the ...js file, it
seems like there would need to be some curly braces (
{ whatever ) stuff as well.
Hmm, I think it's ok just the way Cyclosaurus put it
document.getElementById('nav_layer').style.opacity = 0; // 0 = nav layer off, 1 = nav layer on.
But I could be wrong about that.
3) Does 'the Code' need to be inserted in any
particular place in the file?
Don't think so, no, but don't put it in the middle of something, if you know what I mean. The beginning or end would be best.
4) Today, I will work on moving the Content to the
Body instead of the NavBar area, but mo betta I could
just shut off the NavBar function entirely.
Well if you can do it without editing the js (move the content) then you won't have to keep re-editing after each publish.
5) Do you like Medium Roast or Dark roast - whole
bean or ground?
Hee hee... ALL OF THE ABOVE!!!

Link works in iweb but not after it's published

It only just started after I added a shape (I made sure to send it backward and whatnot). Anyways, yeah, the link works when I click it in iWeb but refuses to work when it's published. How can I fix this?

Nevermind. I fixed it.

Titles work in iMovie but not after I export them

Everything seems to be working normally in my iMovie project but when I export the video, some of the titles are no longer readable (they seem too transparent). When I view the project is full screen mode - it works but once I finalize it and export it, the last few titles get messed up.
I cannot change the color of the text because I am using the "pixie dust" title (which is only in one color).
I have tried clearing the cache, closing iMovie, restaring my computer, duplicating the projects and deleting the old ones...
What else can I do?
THANK YOU!

Open it in QuickTime Player. Then press Command-I to open the Inspector.
Tell us what you see next to the word FORMAT: and also tell us the dimensions.

Cannot get Itunes to regonize my Itouch. Have tried all troubleshooting tips with no luck. Use to work just fine but not after installing Windows 7 and itunes 10. tried starting mobile device but get error code 193: Oxc.1. Any help out there?

cannot start apple mobile device. error code 193: Oxc.1

Actually my iTunes just started!!!!
So if anyone else is having this problem, the last thing I tried was copying the QTMovieWin.dll from my C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to my C:\Program Files (x86)\iTunes folder and started my iTunes Helper.exe
Hope that can help someone!

After uninstalling and downloading the latest Abobe Flash player, I can no lnger play youtube videos. I get the message "blocked plug-in". It works in Firefox, but not Safari.

After uninstalling and downloading the latest Abobe Flash player, I can no lnger play youtube videos. I get the message "blocked plug-in". It works in Firefox, but not Safari?

Frostbitblue,
in Safari’s Preferences, select its Security tab, and make sure that its “Internet plug-ins: Allow Plug-ins” checkbox is checked.

Specific extractor works in DEV but not in QUAL

Hello Everybody
I have new problem : I created a specific extractor ZCRM_SRV_PROCESS_I based on specific FM based on RSAX_BIW_GET_DATA_SIMPLE.
This extractor have to retrieve specific fields of Service Order Item (linked document type BUS2000116)
In DEV it works fine for loading INIT & DELTA
In QUAL, loading INIT does not work but loading works for some records...
Loading finish with following message :
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Job is cancelled in source system with small text :
19.04.2011 14:51:05 Job started
19.04.2011 14:51:05 Step 001 started (program SBIE0001, variant &0000000022545, user ID ALEREMOTE)
19.04.2011 14:51:05 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
Do you know why it works in DEV but not in QUAL ?
Thank you
Cyril
Edited by: cyril meslin on Apr 20, 2011 9:53 AM

There is no problem of authorization. In RSA3 it's ok for some records but too long for full of records.
In fact, my FM make a first select after to be determined init or delta mode :
IF i_updmode = 'D'.
        SELECT i~guid h~object_id h~guid h~process_type
                 INTO TABLE st_zcrmt_bw_i
                 FROM crmd_orderadm_h AS h
                 INNER JOIN crmd_orderadm_i AS i ON h~guid = i~header
                 WHERE h~object_id    IN lr_object_id
                   AND h~changed_at   >= lv_timestp
                   AND i~guid         IN lr_item_guid
                   AND ( i~product_kind <> 'X' OR i~product_kind <> '' )
                   AND ( h~process_type = 'ZSOL'
                      OR h~process_type = 'ZSPE'
                      OR h~process_type = 'ZSVO'
                      OR h~process_type = 'ZSVT' ).
      ELSE.
        SELECT i~guid h~object_id h~guid h~process_type
                 INTO TABLE st_zcrmt_bw_i         "PACKAGE SIZE I_MAXSIZE
                 FROM crmd_orderadm_h AS h
                 INNER JOIN crmd_orderadm_i AS i ON h~guid = i~header
*                 UP TO I_MAXSIZE ROWS
                 WHERE h~object_id    IN lr_object_id
                   AND i~guid         IN lr_item_guid
                   AND ( i~product_kind <> 'X' OR i~product_kind <> '' )
                   AND ( h~process_type = 'ZSOL'
                      OR h~process_type = 'ZSPE'
                      OR h~process_type = 'ZSVO'
                      OR h~process_type = 'ZSVT' ).
      ENDIF.
Then FM CRM_ORDER_READ is running for 500 records to retrieve header data :
CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
      iv_no_auth_check     = abap_true
      it_header_guid       = it_guids      "500 records
      it_requested_objects = lt_requested_objects
    IMPORTING
      et_orderadm_h        = lt_orderadm_h
      et_service_os        = lt_service_os.
Then this FM is running for 10 records for item data (max 10 because FM CRM_ORDER_READ does not work for more records) :
CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
      iv_only_spec_items   = abap_true
      it_item_guid         = it_guids         "10 records
      it_requested_objects = lt_requested_objects
    IMPORTING
      et_orderadm_i        = lt_orderadm_i
      et_sales             = lt_sales
      et_appointment       = lt_appointment
      et_status            = lt_status
      et_text              = lt_text
      et_subject           = lt_subject
      et_doc_flow          = lt_doc_flow
      et_customer_i        = lt_customer_i
Perhaps if I succeeded to improve SELECT & call of CRM_ORDER_READ, it would be better but I don't know how to do...

Downloaded 5.0 now it will only get on internet after I reboot but not after i close out foxfire

I downloaded the new 5.0 and when I click on the icon nothing happens. If I reboot the computer it will work the first time but not after that .

Hello pbandy34,
Canon still maintains a full version of ZoomBrowser v6.6.0b [full application] on our web site. Click here to download that version and install. Once you have it installed, go back to the same page linked above and grab the ZoomBrowser 6.9.0a Updater and that will take you to the latest version.
We hope that you have a wonderful day. If you require further or urgent technical assistance, feel free to get in touch with an agent at our Chesapeake, VA call center through the Canon USA web site.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Album Art works for most, but not all

I was reading previous forums on the subject, but no clear answer was given..
The album art shows up fine in itunes and my library and works for most of my music on my ipod, but how come some album's art does appear? I have it set manually and select 'Get Info' then 'Artwork' and add it from there, then drag in the finished product to my ipod. I've been doing that and it works fine for most of the albums, but every so often, the album art will not appear on my ipod. Am I doing something wrong? I take them all from the same source (amazon.com) but it makes no sense to me how some randomly don't appear.
I tried deleting the artwork and re-adding it, but nothing happened again. If you could answer why it works for most but not all or how I can get the album art to appear for the ones it will not by re-doing something, it would be appreciated. thanks.

I encountered the same problem in the beginning. When I compared the size of the original images, the working ones seemed to be smaller in general, so I reduced the size of all covers I intended to upload on the pod to 300x300 pixels.
This seemed to work - for 2 days. I bought the pod on friday, had pictures on sunday, but on Monday (after the first time the pod was fully discharged) none were left left.
So I ended searching this forum for related problems...
And decided to join my problem to this entry.

Spry tooltip works in IE but not Firefox

Hi,
I don't understand or can't figure out what I have done wrong. I have created a tooltip for the last product (4 inch diameter Vortex Water Revitalizer in copper (special order)) on the page: http://www.alivewater.net/order.htm
It works in IE but not Firefox... I can't figure out why... can you help me and see what I have done wrong?
Eternally grateful,
Starry

I think I fixed the problem.. maybe you had looked at it after it was fixed. I do appreciate your help though!

Mac mini webcam works on facetime but not oovoo

I am using a Rocketfish hd webcam and it is working on facetime but not on oovoo. Can someone provide a solution?

P.S.
If the third-party support info and help does not get it working for you, you can also use OS X Mavericks recovery or reinstall to repair your startup disk or reinstall OS X 10.9.
Also Apple's http://support.apple.com/kb/HT2090
(Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
Message was edited by: EZ Jim
Mac OSX 10.8.5

Backlight works on startup but not after further unlocking???

Similar Messages

Maybe you are looking for