Backlit keyboard repeated trouble

Hi everybody;
I have a MBPR that I use to work, about a pair of months ago it had several issues. First the camera stop working, then the backlit began to flashing. I had to take it to the technical service. To repair the first trouble (the camera) they had to replace the logic board and a week after  for  the flashing backlit problem they had to replaced the logic board again, the display and the top case. This repairs delayed more than a month  and the device was returned to me a few days ago.
All looks good, but today I noted that after several hours of working (about 3 hours), the backlit stop of run and dont work in any way, if I turn off the computer and turn on after an hours the backlit works normal again.
I really dont know what to do about it, I would like that my device works perfect because is almost a new device, and with these issues and all the pieces that have been replaced I'm afrait that in the future could be a bigger problem. By other hand I dont wanna go to the technical service again because I use my computer to work  and because the all the  bad working device I'm delayed in more than a month. So I would like your opinion about this issue. Do you think that the backlit issue could be something more serius in the future? Maybe there is easier solution and I dont have to go to the technical service again.
Thank you.

You probably have the backlit feature turned off in the Keyboard and Mouse system preference. Turn it back on. The other possibility is your room is too light for the keyboard to activate. You can cover up the left and right speaker grills to simulate darkness and try the keyboard short cuts.
Glor

Similar Messages

  • Having trouble finding a driver/utility for backlit keyboard

    I did a fresh install of Windows 7 and have come across a utility that I cannot find, its for the infrared sensors near the webcam that detects if you are near the computer and turns the backlit keyboard off if you are not sitting in front of it.

    Amazon has the OEM standard and extended batteries for your phone:
    http://www.amazon.com/Motorola-Droid-XT610-Standard-Battery/dp/B0080Z886K
    http://www.amazon.com/MOTOROLA-EXTENDED-BATTERY-DROID-XT610/dp/B004UAW94G

  • Backlit Keyboard malfunction ?  Keyboard is changed, then the logicboard ?

    Hi,
    The backlit of my MacBook Pro is broken, so I went to a technical center in order to change it, nevertheless it does not work... Could the logic board be the part which causes this trouble ?
    What can I do ?

    I met a lot of troubles with this MBP:
    - The superdrive had been changed
    - the LCD had been changed 2 times
    - the Logic Board has already been changed
    - The Backlit Keyboard has been changed ...
    Nowadays the backlit does not work...
    All the technical centers are not very professional (the last time they didn't rebuild correctly the MBP, there was a little space at the front...), but they said that they changed the keyboard, so it was simply my question... do the logic board could be responsible ...
    I have to said also, that in this case they told me that my MBP would be change for a new one .... but I don't want that, because I love my non glossy LCD, the confort of my keyboard and I need the FW 400 and my FW 800 in the same time for video acquisition....
    In this case i would have to take the new one, to sold it and to find another one on 2nd hand market

  • Dim Backlit Keyboard HP Pavilion DV6t-7000

    The backlit keyboard went dim after having it on for a few hours while working on some projects. I can only see the light if I look underneath the keys.  I have had the lights on for long times before it when dim. I have looked on these forums for any information happening before and found one that mention a proximity sensor that may need to be ajusted, but I looked on my computer and does not have that bit of software.
    So I would like to find out is there any way to fix this or would I end up needing to replace the keyboard.
    Thanks.

    Hi Zannh,
    Try the following.
    Shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Any change?
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Backlit Keyboard has stopped working on Satellite P50-A-12Z

    I bought my Satellite P50-A-12Z over a year ago, and since few weeks the backlit keyboard has stopped working.
    I used to hold FN+W to turn on/off the light keyboard, but now it doesn't work anymore and I have the message "chronometer" on the top right of the screen as you can see on this screenshot:
    https://imagizer.imageshack.us/v2/1050x591q90/903/Estd0f.png
    When I go to Desktop Assist > Tools & Utilities > Function Key , keyboard backlight is set to OFF but can't set it to ON:
    https://imagizer.imageshack.us/v2/1050x591q90/745/gMqGvq.png
    Please help me

    Hi
    I don't know if this will help but try please following: perform complete shutdown - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    Start notebook again and press F12. There you should find option to enter BIOS settings. Enter BIOS settings and try to enable keyboard backlight there.
    Please test it and send some feedback.

  • Keyboard repeating not working with latest update for mac?

    I just updated my Macbook Pro with a new version of Yosemite and i have come to find that the keyboard repeating function is not working anymore, even with the command: defaults write -g ApplePressAndHoldEnabled -bool false
    in terminal.
    Is there anyway to resolve this? I find the other character extremely annoying that they always pop up
    thank you!

    The repeating function you want has been off by default since 10.7 was released 3 years ago.  That terminal command should normally do the trick.  Did you logout and login again?

  • Is it possible to add a backlit keyboard to an hp envy touchsmart 15

    is it possible to add a backlit keyboard to an hp envy touchsmart 15?

    Daevid.
    Yes you can.
    Your manual here.
    http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CB8QFjAA&url=http...
    Page 20 chapter 3.
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Backlit keyboard no longer working.

    I just recently upgraded my 2010 macbook pro RAM. I went from 4gb to 6gb and now my backlit keyboard is no longer working. I have tried messing with the keyboard settings as well as the F5 and F6 buttons. The keyboard does not even come on in low lit conditions. Why is my backlit keyboard no longer working?

    Hi...
    Try Resetting your Mac's PRAM and NVRAM
    If that doesn't help, try Resetting the System Management Controller (SMC)

  • [SOLVED] Keyboard repeat messed up after update to Xorg 1.6

    Did anyone else notice the keyboard repeat rate and delay changed after the update to Xorg 1.6? It takes longer to start repeating and the rate is lower (at least in a terminal). This happens both in xmonad (started through xinit) and KDE (started through gdm).
    xset q has the same output in both xorg 1.5.3 and 1.6:
    auto repeat delay: 660 repeat rate: 25
    The weird thing is, I don't think this is the true delay and repeat rate in effect when using xorg 1.5.3 -- it reacts much faster than that.
    After the update to xorg 1.6, I started KDE (though I seldom use it) and played around with the keyboard settings in the 'SystemSettings' control panel. I guess the delay closest to the old one is about 300.
    Does anyone know how to get the old settings back? I had to downgrade to 1.5.3, since this drives me nuts.
    EDIT: Doing xset 250 25 helps a bit, but doesn't feel quite right.
    EDIT2: Might be related to this http://bbs.archlinux.org/viewtopic.php?id=67759
    Last edited by meqif (2009-04-12 14:31:52)

    Procyon wrote:
    Explicitly define your keyboard in xorg.conf and don't use evdev but kbd.
    You just need to add to Section "ServerLayout"
    InputDevice "Keyboard0" "CoreKeyboard"
    And add the section
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "CoreKeyboard"
    EndSection
    Maybe one of those CoreKeyboard definitions is redundant.
    For that I'd have to also add Option "AutoAddDevices" "off" to ServerLayout.
    That's not really the problem, I was using evdev with xorg 1.5.3 and everything was fine. What I'd like to know is, what was the default delay and repeat rate in xorg 1.5.3, so I can set it in xorg 1.6.0 (with xset or something).
    Thanks for your suggestion, though.
    Last edited by meqif (2009-04-12 13:22:47)

  • Availabili​ty and Fitting of backlit keyboard to Envy DV6 - 7331SA

    I've an Envy DV6-7331SA which works just fine.
    I'd quite like a backlit keyboard.
    Googling around it seems that backlit keyboards are available but 
    1. Is this just a simple replacement. I presume the keyboard comes with the backlight cable and there is already a socket for it on the mobo? or what?
    2. I can find various foreign and US keyboards but dont seem to be able to find a UK backlit keyboard.
       - Is this available
       - What is its part No.
       - where can I get one
    TFAI

    Check
    http://partsurfer.hp.com/
    I'm an HP Employee.
    The opinions expressed here are my personal opinions, not of HP.
    Click on Thumbs up if my post helped you.
    Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.

  • I am about to buy a MacBookPro in Singapore. When I reach the "Configure your 13-inch MBP w/ Retina display" page I don't have the option of selecting a Keyboard. Instead, it says: Backlit Keyboard (Int'l English). Do you know what does that mean?

    I want to buy a 13-inch MacBook Pro with Retina display in Singapore through the web http://store.apple.com/sg/buy-mac/macbook-pro?product=MGX72ZP/A&step=config#hard ware and want to know what does Backlit Keyboard (Int'l English) mean.
    Does it include other letters or symbols other than the latin qwerty ones?
    I ask this question because it doesn't give me the option to select a language.
    I hope someone can help me!
    Thanks a lot!
    Alan

    This is what you get (English only): How to identify keyboard localizations - Apple Support

  • Can I Replace a Keyboard(N​on-Backlit​) with a Backlit Keyboard in my HP Pavilion 17-e119wm Laptop?

    Hey guys, my name is Armando
    I bought this laptop back in April -->http://www.walmart.com/ip/HP-Anodized-Silver-17.3-​Pavilion-17-e119wm-Laptop-PC-with-AMD-A10-5750M-Qu​...  
    cause my old HP laptop had too many problems. Anyway I was wondering if this laptop in the link can change its regular keyboard for a LED backlit keyboard instead cause I usually find my self using it in the dark most of the time and the keyboard gets hard to see in the dark. So I was wondering if you guys would know if it can be upgraded. ( it would be helpful for me playing games on Steam in the night)
    This question was solved.
    View Solution.

    Hi
    No Armando.
    There is no ZIF connector for it in the board, so basically you've to change the whole motherboard & I don't see any compatible boards with that function.
    Regards,
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • Satellite A500 PSAM3A - Can I install a backlit keyboard?

    Hello,
    i have a Toshiba Satellite A500 laptop with the following numbers i can find: P7350 part number PSAM3A-04200E serial number- 79365650K.
    I would like to install a backlit keyboard onto it,
    Is this model compatible?"

    Hi
    Satellite A500 PSAM3A-04200E seems to belong to Toshiba Australian notebook series.
    In order to use a backlit keyboard, the motherboard needs to provide a special connector/port for keyboard illumination cable.
    You could get some details from a Toshiba ASP in Australia
    www.mytoshiba.com.au
    But I found some parts retailer and many of them provides keyboards W/O BACKLIGHT

  • I'm using the latest photoshop cc 2014 with most updated camera raw... i am having A LOT/REPEATED trouble getting files to "synch" with corrections, no matter what i options i select (i.e. "everything")... WTH is wrong with me/my computer/adobe?! help. fa

    I'm using the latest photoshop cc 2014 with most updated camera raw... i am having A LOT/REPEATED trouble getting files to "synch" with corrections, no matter what i options i select (i.e. "everything")... WTH is wrong with me/my computer/adobe?! help. fast. please

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Is backlit keyboard of 13-inch Macbook Pro with Retina display integrated English and Russian ?

    Is backlit keyboard of 13-inch Macbook Pro with Retina display integrated English and Russian ? I mean Russian is integrated on keyboard not by using stickers or installing font

    cobebc wrote:
    Is backlit keyboard of 13-inch Macbook Pro with Retina display integrated English and Russian ? I mean Russian is integrated on keyboard not by using stickers or installing font
    Apple does make these, but they are not sold everywhere.  Where are you located? 
    Nobody in these forums represents Apple or any store, so to find out whether you can buy a particular product you will need to contact stores directly yourself.  In the US you can sometimes get unusual keyboards by talking to an apple retail store and asking for a special order.
    http://www.apple.com/retail/

Maybe you are looking for

  • I need to replace one of my hard drives for Power Mac G5

    Hi guys, I've been having some trouble turning on my computer. I found out that one of my hard drives (I have two) have been damaged. The damaged hard drive is 250 gigs. Its a MAXTOR hard drive and on the top right corner it says "DiamondMax 10" Then

  • Filtering out non assigned category

    I want to create a query from a multicube.  Can I filter out the not assigned node from queries? Thanks

  • XI 3.0 Installation Software

    hi, I'm planning to install XI, I got all the documents in the marketplace. Pleaset let me know how to get the software (CD number??). And can I download Rapid Installer (standalone), if so please let me know the url / path in Marketplace. HP

  • Multiple header pages

    I am creating a large report where the header section spans 2 pages. Currently, reports prints just the first page in the header section. How can I get the other page to print? I tried the vertical panels per page property, but that doesn't seem to w

  • Print PDF, 5 different reports and send pdf to 5 emails to different people

    Hey Forum experts. Here's my question. In Apex 3.0, I know that we can now print to pdf. Woohoo for that feature... Can we print to pdf 5 different reports. and then email those 5 different pdf outputs to 5 different emails? Can it be done? and then