Backspace key not working - Macbook Pro using Mavericks

I've got a Macbook Pro (early 2011 model) which I upgraded to Mavericks earlier this year and all has been working fine. Over the past few days I noticed my backspace key was playing up (sometimes it worked, other times I had to press hard a few times before it would work at all) until today when it decided it would not work at all. I have already checked in System Preferences and restored defaults as well as resetting the PRAM but to no avail so far. Is there anything else I can try or will I need to take it back to the store and get it looked at?

Since you reset the PRAM, I would take it in for diagnosis.
Barry

Similar Messages

  • Dim light key and volume up key not working macbook pro

    I couldnt help to have realized when I turned my macbook pro on today when ever I type a P I get p0 P) and when I try to increase the volume my screen dims and when as I am typing right now my keyboard is typing in random functions not done before. Help Please !!!

    Try resetting PRAM/NVRAM   http://support.apple.com/kb/ht1379
    Try resetting the  SMC http://support.apple.com/kb/ht3964

  • Media keys not working MacBook Pro 17"

    Just today my media keys are no longer working to control iTunes (F7 thru F10). I've unable too check the keyboard settings in system preferences because it crashed when I try and open it. I have rebooted twice and repaired permissions.

    I had a eureka moment this morning- Google Play Music basically hijack my media keys. So long as Chrome is open, the keys seem to be wired to the play store (they work normally, skipping, pausing and playing). If I quit Chrome, the keys work as normal with iTunes, opening and moving through the tracks.
    I don't know whether this information helps but it certainly seems to answer my problem.

  • Backspace key not working

    Approx. a week ago my backspace key stopped working.  Haven't a clue as to why or what might have triggered this.  All other keys appear to work.  No other issues detected on my system.  Have tried reseating the key, air dusting the area, etc.
    HP Pavillion dv7-3080us notebook
    Windows 7 64-bit
    Any suggestions on troubleshooting?
    Thanks.
    Mike

    Hi,
    In my experience with Maple I have noticed that some versions do not accept backspace and will only register shift-backspace as a valid combination.
    Try using shift-backspace and let me know if that works.
    -J.

  • Macintosh 128k backspace key not working

    I just bought an operational 1984 Macintosh 128k. All of the keys work, but backspace. Since this is a key I use a lot, I want to have it work. There is something wrong with the key, not the software. If I go to Key Caps, the backspace button on the screen will work if I press it. The key on the computer, for some reason, will not backspace when using macwrite. What should I do?

    Try E-Bay. Any keyboard for the 128k, 512k, or the Macintosh Plus will work for you. The later versions of the keyboard include a number pad while the earlier ones did not. Any Mac after the Plus, such as the SE or Classic, will not work since they use ADB.
    It's not likely you can repair it. I'd recommend gently popping off the button (be careful not to force it off) and see if cleaning it helps. You mentioned that it works only with the caps-lock, which is unusual, which may mean it could be electrical. Most likely you can't repair it.
    While I'm pretty sure it's a hardware problem, you can try to boot off another disk just to double-check.

  • Calendar on MacBook Pro using Mavericks 10.9 will not sync with Google Apps for Business

    Ever since the Mavericks upgrade, I have had problems syncing my MacBook Pro Calendar with my Google Apps for Business Accopunt.  When Mavericks first came out, I could do a work-around and set up a second CalDev account and that worked for a while.  But with the most recent update to Mavericks, in part apparently to solve Google integration issies, the Calendar app will not sync either through the mail account setup in System pref, or by setting up a separate CalDev account.  I have no functioning Calendar on my MacBook, thogh the CalDev account option works fine on my iPhone and iPad, and of course all work on the PC with Google Apps Sync.
    Appreciate any advice, or better appreciate if Apple were to get this right ASAP.

    Thank you for your answer, unfortunately that is not the solution. I found the plug-in where it was already properly installed in the Root Level Library>Internet Plug-ins Folder.  It was NOT to be found in the [User Name]>Library>Internet Plug-Ins Folder, so I copied it there from the Root Level Folder, Rebooted, deleted all cookies, signed in to Netflix, and I still get the same:
    Thanks for installing
    Once installation is complete please restart your browser to watch this movie.
    So, I tried a complete re-install of Mavericks OSX 10.9, from scratch. I checked all Internet Plug-In Folders and the latest version Silverlight Plug-in is in all of them. Still, I get the same:
    Thanks for installing
    Once installation is complete please restart your browser to watch this movie.
    Any other Suggestions?

  • Flashing Question mark: New hard drive not working Macbook Pro late 2008

    After following several peoples advice on this forum I decided to upgrade my Macbook Pro late 2008 with a Seagate (1TB) Solid State Hybrid Drive 2.5 inch.
    Heres the device.
    http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
    After creating a mountable boot on a External hard drive with Mavericks install I removed the current hard drive and replaced with the new seagate drive. However it didn't seem to recognize the external hard drive (it is quite old but works perfectly) and went to a flashing grey question mark screen and wouldnt do anything else. Ive tried holding down command-r and option-r but I get nothing. Its just the same flashing question mark. I have done this several times and the same result.
    I put the old drive back in and it works fine.
    I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer?
    Appreciate your help
    Gary

    Sorry I think you may be confused.
    I am trying to install the new Seagate hard drive to my mac (not as an external hard drive).
    I replace the macbook pro hard drive with the seagate drive:
    http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
    I then started up the machine with a usb external hard drive with a boot copy of mavericks on it. However, it just displayed a flashing question mark and wouldnt start booting the osx.
    I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer? Im guessing it must be hard drive. Would it be better to use a USB pen drive as the external hard drive is quite old?
    Does anyone know what the problem could be as the hard drive is brand new.
    Appreciate your help
    Thanks, Gary

  • Transfer files from old macbook pro to new macbook pro using mavericks

    I have called Apple support about 5 times about this and have been given 3 or 4 different response none of them work. 
    I do not have an ethernet cable.
    The computers are on same network.
    I have time capsule not yet set up.  Apple support told me to use usb but no port on new mac. So old mac is running OSX 10.8.5 and new one is Maverick.  I cannot update files on old computer as I just get this message to sign in to my acount that used to buy old apps.I am 1.5 hours away from apple store so if i needed special cable from Apple i would have purchased it with Time Capsule.  I was told that to do it wirelessly would take over a day.
    Right now am puzzling over what is best to do without losing files.  I dont want to lost my music files as I have had them for a long time and all were not purchased from itunes store. 
    Any thoughts on where to start feel free to suggest them.
    Thanks Jan

    Just one comment on this:
    ‘If I have, say, an older version of iPhoto but a newer version of one on my new Macbook Pro, will it still transfer photos no problem?’
    the problems are ALWAYS in the reverse way, when you have the newest (or a newer) version of a given app, and wish to transfer its library to an older version.
    Otherwise, see the link to Pondini.
    I have been using Martin Jahn’s iBackup, with which I have become accustomed and works fine. It also makes daily backups. Its advantage over other apps is that you may add whatever you wish to save, beside its default settings (which you may delete or cancel, of course, even if not recommended); it also has a friendly interface and easily customizable. Of course, this is a personal view, you may try other methods as well, or other backup apps. All are good if you are satisfied and correspond to your needs.

  • Speakers not working - Macbook Pro

    Hi,
    Am facing this issue from today, that speakers on Macbook Pro are not working, when am MAC OS. When I boot into Windows 7 (Bootcamp), the speakers seems to be working.
    I have checked the mute key, to ensure the MAC is not on mute mode.
    How can I debug this issue?

    Resetting Mac's PRAM and NVRAM did not helped.
    Then I checked Sound settings in System Preferences and in Ouput Tab, the value selected for Sound Output was Apple TV. Probably it got changed when I was streaming the conten yest. using Apple TV.
    I changed it back to Internal Speakers and and got the sound back on speakers.
    Thanks for all your assistance.

  • HDMI output not working MACBOOK Pro (Oct 2014)

    I am trying to get another screen connected to my MBP, I have tried numerous screens and cables to achieve this, but I can not get it to work.
    Is there a on/off or disable HDMI output on the MBP?
    I have used various screen, which i know work. And a HDMI to DVI and HDMI to HDMI cables to screens . I know the cable and screens work as I use them at work on a daily basis.
    All I get is "No signal connected".
    Is there any diagnostics or tests I can do?
    Regards,
    Rowland

    I have a 13" MacBook Pro.

  • Keyboard wonky.... delete/backspace key not working

    I have the flat Ali keyboard. Got it about a month ago. It was working OK until yesterday. Went to System Preferences and set the F9 key to show "All windows". After doing this, the Delete key began working in forward-space manner instead of backspace.
    The ARROW keys no longer work. Left arrow goes all the way to the top of the page, rather than one space back. Other three arrows do nothing.
    Went back to System Preferences. Selected reset defaults. Did not fix the problem.
    What do I try next?

    Eventually found the answer myself. I deselected the button for "Use F1 and F2 keys as standard....."
    It has been a good reminder to only change one thing at a time when "messing" with the System Preferences panel.

  • Microphone and Line In Suddenly Not Working Macbook Pro 15" Early 2011

    Yesterday without warning, my internal mic stopped working on my Macbook Pro 15" Early 2011. I discovered this when the recipient of a Skype call couldn't hear me, and verified that the mic was not getting any level in the Sound system preferences pane. There is also no microphone input happening when I plug in my iPhone headset to the headphones jack. The audio out seems to be fine. I had to use a USB microphone to get any sound into the computer. I used the microphone just a few days ago without any issue.
    I've already tried:
    Rebooting
    Resetting PRAM
    Creating second account to test audio
    And none of the above had any affect. Other note: I recently had the GPU of this computer replaced under Apple's special replacement plan. Anything else I should try before making an appointment to have the hardware looked at?

    pushyourmind,
    If you’re up-to-date with Software Update, then you have the correct firmware installed. If you’re running 32-bit Windows 7, then Boot Camp Support Software 4.0.4033 contains the correct drivers; if you’re running 64-bit Windows 7, then Boot Camp Support Software 5.1.5621 contains the correct drivers. Which ever support software corresponds to your version of Windows 7, try downloading the corresponding .zip archive and following the installation instructions on the corresponding link above when booted in Windows.
    Boot Camp 5.1 supports Windows 8.1 on your model MacBook Pro if you’re running OS X 10.8.3 or newer. Earlier versions of Boot Camp and older versions of OS X don’t support Windows 8.1 in Boot Camp on your model MacBook Pro.

  • Bluetooth not working macbook pro 2011, AHT found nothing

    My macbook pro 2011 has been having some issues with bluetooth. The system doesn't even recognize as having bluetooth hardware. I went under the hardware profile and it actually says No information found under bluetooth. I was able to do a full hour diagnostic test using Apple Hardware Test and everything was all clean. I'm not sure if this is Yosemite related or not. I definitely remember using my bluetooth enabled keyboard and mouse on my system before I upgraded to Yosemite. Wifi works fine. I've tried resetting PRAM, but nothing. I'm at a loss, not sure if there is anything else I can do.

    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • Wifi, Bluetooh and iSight not working MacBook Pro

    I have a mid 2009 MacBook Pro Unibody. 8Gb Ram  Mavericks OS. I powered down one evening, everything normal.  Next day I rebooted it to find that I had lost Wifi, Bluetooth and isight.  Oh, and the fan runs at high speed constantly.
    Ptheise computer is running OK and I can connect to network via ethernet.
    Messages are:
    1. Wifi - no hardware installed
    2. Bluetooth - not available
    3. iSight - there is no connected camera.
    I have rebooted in safe mode, reset NVRAM and SMC, left it off for 30 hours. Tried an AHT. None worked.
    Have checked system information.  Responses are:
    1. WiFi
    Software Versions:
      CoreWLAN:          4.3.2 (432.47)
      CoreWLANKit:          3.3.2 (332.36)
      Menu Extra:          9.3.2 (932.35)
      System Information:          9.0 (900.8)
      IO80211 Family:          6.3 (630.35)
      Diagnostics:          3.0 (300.40)
      AirPort Utility:          6.3.2 (632.3)
    2. Bluetooth
    No information found
    3. Camera
    No video capture devices were found
    I'm presently redownloading Mavericks to do either a reinstall, or clean install, but before I do this can anyone suggest a solution?  Computer back up is up to date.
    NB: I live in Botswana where there are no Genius bars, nearest reliable service is in South Africa and downloads are VERY slow.
    Thanks in advance

    Restarting Mac may fix it.  Otherwise: http://support.apple.com/kb/HT2090
    (Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your built-in camera, the same info and troubleshooting applies.)
    Message was edited by: EZ Jim
    Mac OSX 10.8.1/span>

  • Backspace Key not working since update to 10.5.8

    Hi,
    I recently updated to 10.5.8 (or which ever update it was where the iDisk icon turned blue) and now my backspace key doesn't seem to be working. I am using a white Apple USB keyboard. The backspace key now functions like the forward delete key and if I want to backspace I have to press Shift + Backspace. This is very frustrating and not something I have had to do before or need to do on my Powerbook.
    At first I thought the keyboard was broken, but I am running a Power Mac G4 on a switch cable with the same keyboard and monitor. I have updated the Power Mac to 10.5.8 and the backspace key works fine.
    If anyone has any ideas please let me know.
    Yours
    Dominic

    Welcome to Apple Support Communities
    I think you wanted to say Mail 4.6, or is Mail 3.6 right? There's a bug in OS X 10.6.8 that may make Mail stop working after updating to 10.6.8. Apple has got the steps to fix that > http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US

Maybe you are looking for

  • Data transfer from planning to ASO.

    Hi, Like that: Data load in Planning, and data retrieve in ASO. And we want a real time data transfer from Planning to ASO. Transparent partition from BSO to ASO is a choice, but the performance is an issue. If we user replicated partition, data cann

  • Upgrade from 4.7 to 6.0

    We are upgrading our client's system from SAP 4.7 to ECC 6.0. May I know if there is any mandatory OSS notes that needs to be implemented. Regards, Surya

  • More ethernet connections for airport express

    I am looking to hook up an ethernet switch to an Airport Express to provide additional ports to connect devices such as a printer (which doesn't want to function consistently in Wi-Fi mode), and possibly a Blu-Ray player. Any problems with my thinkin

  • External data interface in LABview

    i have a software which is developed in VB.It has a ActiveX component i can call this component and using the property node and invoke node.How i can communicate with this component b'coz this activex component require data from the database so, how

  • No delta can be captured on generic datasource

    dear experts, i create a new generic transaction datasource for sale order list. the fields include : 1 sales order number                               2 sales org                            3 sales person                            4 change date