Backspace key not working

Approx. a week ago my backspace key stopped working. Haven't a clue as to why or what might have triggered this. All other keys appear to work. No other issues detected on my system. Have tried reseating the key, air dusting the area, etc.
HP Pavillion dv7-3080us notebook
Windows 7 64-bit
Any suggestions on troubleshooting?
Thanks.
Mike

Hi,
In my experience with Maple I have noticed that some versions do not accept backspace and will only register shift-backspace as a valid combination.
Try using shift-backspace and let me know if that works.
-J.

Similar Messages

Keyboard wonky.... delete/backspace key not working

I have the flat Ali keyboard. Got it about a month ago. It was working OK until yesterday. Went to System Preferences and set the F9 key to show "All windows". After doing this, the Delete key began working in forward-space manner instead of backspace.
The ARROW keys no longer work. Left arrow goes all the way to the top of the page, rather than one space back. Other three arrows do nothing.
Went back to System Preferences. Selected reset defaults. Did not fix the problem.
What do I try next?

Eventually found the answer myself. I deselected the button for "Use F1 and F2 keys as standard....."
It has been a good reminder to only change one thing at a time when "messing" with the System Preferences panel.

Backspace key not working - Macbook Pro using Mavericks

I've got a Macbook Pro (early 2011 model) which I upgraded to Mavericks earlier this year and all has been working fine. Over the past few days I noticed my backspace key was playing up (sometimes it worked, other times I had to press hard a few times before it would work at all) until today when it decided it would not work at all. I have already checked in System Preferences and restored defaults as well as resetting the PRAM but to no avail so far. Is there anything else I can try or will I need to take it back to the store and get it looked at?

Since you reset the PRAM, I would take it in for diagnosis.
Barry

G,H,Backspace Keys Not Working- G7 Series Notebook

Product name: HP Pavilion G7-B5Z48UA
Operating system: Windows 8 64 bit
I purchased this computer about a month ago, and it was fine. A few days ago, I noticed that several of the keys (g,h,',backspace, 8) were not working. After the computer has been on for a few minutes, they start to work. This lasts for about a minute or two, then they stop working again.

Hello Lorelly,
Take a look at this page and follow the troubleshooting steps to update your BIOS. The latest version (F.23) was released less than 25 days ago.
Please let me know if this helps resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Macintosh 128k backspace key not working

I just bought an operational 1984 Macintosh 128k. All of the keys work, but backspace. Since this is a key I use a lot, I want to have it work. There is something wrong with the key, not the software. If I go to Key Caps, the backspace button on the screen will work if I press it. The key on the computer, for some reason, will not backspace when using macwrite. What should I do?

Try E-Bay. Any keyboard for the 128k, 512k, or the Macintosh Plus will work for you. The later versions of the keyboard include a number pad while the earlier ones did not. Any Mac after the Plus, such as the SE or Classic, will not work since they use ADB.
It's not likely you can repair it. I'd recommend gently popping off the button (be careful not to force it off) and see if cleaning it helps. You mentioned that it works only with the caps-lock, which is unusual, which may mean it could be electrical. Most likely you can't repair it.
While I'm pretty sure it's a hardware problem, you can try to boot off another disk just to double-check.

Backspace Key not working since update to 10.5.8

Hi,
I recently updated to 10.5.8 (or which ever update it was where the iDisk icon turned blue) and now my backspace key doesn't seem to be working. I am using a white Apple USB keyboard. The backspace key now functions like the forward delete key and if I want to backspace I have to press Shift + Backspace. This is very frustrating and not something I have had to do before or need to do on my Powerbook.
At first I thought the keyboard was broken, but I am running a Power Mac G4 on a switch cable with the same keyboard and monitor. I have updated the Power Mac to 10.5.8 and the backspace key works fine.
If anyone has any ideas please let me know.
Yours
Dominic

Welcome to Apple Support Communities
I think you wanted to say Mail 4.6, or is Mail 3.6 right? There's a bug in OS X 10.6.8 that may make Mail stop working after updating to 10.6.8. Apple has got the steps to fix that > http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US

Backspace key not working on SQL Developer 3.2.20.09 on Mac OS X 10.7.4

Hi,
I've searched around and found that the backspace and arrow key problem has been a known issue on 1.x versions of SQL Developer. In that version the fix was to reload the keyboard Accellerator bindings in Tools->Preferences->Accellerators. However, the Accellerator dialog isn't available on 3.2.2 version. Is there any other way to fix it? I know on some Macs, the keys work fine.
Thanks,
Richard

Hi Richard,
The Accelerator feature was renamed. Rather than
Tools->Preferences->Accelerators -> Load Presettry instead
Tools->Preferences-> Shortcut Keys -> More Actions -> Load Keyboard SchemeHopefully reloading in 3.2.2 will have the same impact as in the 1.x releases for your issue.
Regards,
Gary
SQL Developer Team

Some keybaord keys not working after suspect virus on Tecra A

Apostrophe, delete, semicolon and end keys not working after a suspected virus attack. I found record of the same problem on the net but apparently this guy fixed his problem after he found scroll lock or num lock on.
This is not the case here but there is something going on with numlock - register shows 2 and not 0. change to 0 but when reboot back to 2 again.
Suspect changed back by bios. I thought i couldnt get to bios because DEL key not working but found ESC works.
Tried to reset default values for bios but then cannot save and exit as this required the END key to work.
I was running XP at the time of the (suspected) attack and could not rectify the problem so put the computer back to the OEM status which i hoped would help - it did not, same problem so rather than install all the software on the computer again with XP i upgraded to Windows7 - fresh install.
Still keys do not work - it was a real pain to start with as my computer was set up to ctl+alt+del to log in and i had to do this with on screen keyboard - XP - this also showed that numlock was on before and after windows boot.
The reason i suspect a virus - my wife was watching one of her tv shows on line from home country (another toshiba laptop) and i needed to use that laptop for something else so i asked her to use mine - later on we turned the laptops off and in the morning turned tham back on again, the other laptop with AVG virus protection flagged several hits and this one with (FAMOUS and completely up to date) Norton flagged nothing - once i got into it using on screen keyboard.
Problems with this computer was found after scanning with a different antivirus.
Anyway - i am left with 4 keys that do not work on my keyboard (actually they did work after i logged into the computer for the first time but i had to hold them in for a long time - and then next time i rebooted, not work at all and havent ever since)
Any assistance here would be greatly appreciated, i have been working on this all weekend with no joy at all.
Thanks in advance.

Thanks Xardas,
I have essentially done both - tried Toshiba OEM status found on a small partition of the toshi hard drive - no good - then did a fresh install of Windows 7 - still no good
You know - as cunning as it sounds - i cannot reload the default settings in BIOS as it requires the END key to work so i can Save & Exit - all i can do is Exit Without Save - i sort of feel snookered at the moment.
Toshiba got back to me today and said that i have tried everything they would have (yeah for sure) and to take my machine into a service centre for a hardware check - yeah right on boys!
Check out this guys post below found on Kioskea.net - getting close to a year ago...
ms ml - Nov 10, 2009 12:52am GMT
Hi there, I was hoping that you might be able to help me with the problem that I seem to be having with my Toshiba Satellite Laptop Keyboard too. For a few days now I havent been able to use a few of the keys on my keyboard, including (1) delete (the backspace key is still working though), (2) colon/semicolon, (3) apostrophe/quotation marks and (4) end (the home and PgUp and PgDn keys are still working though). Any suggestions?
Identical to my problem....obviously this guy had the same problem as well...see below - same thread.
yab - Feb 9, 2010 4:47am GMT
hi did you ever figure this out? i have the same exact problem...
However, i was not able to solve my problem the way this guy did - my scroll lock is not activated - it seems to work ok (on and off) i tested it using Excel to move around the cells.
yab ms ml - Feb 9, 2010 7:57am GMT
Nevermind. For me it was scroll lock. My apostrophe, semicolon, and delete keys are alive and working again. I hope you have the same easy fix.
Incidently - never hear from the first guy again - probably ended up being his scroll lock.
all sugestions welcome - sorry my smily face has no eyes -) guess why!

JMaskField mask input : delete and backspace do not work

I am using this package for formatted input.
Delete and backspace do not work if the field is created with a default text as in the code snippet I attach. Did somebody managed this to work? How? delete and backspace work badly in everycase anyway.
best regards
-Mangi
MaskMacros macros = new MaskMacros();
macros.addMacro('*',"[a-zA-Z0-9]");
macros.addMacro('#', "[0-9]");
macros.addMacro('@', "[a-zA-Z]");
macros.addMacro('%',"[A-Z]");
macros.addMacro('*',"[a-zA-Z0-9]");
MaskField2 k = new MaskField2("CODE******",macros);

Nope, I don't think those keys are even "firing" as another person worded it. I can push the buttons down, so they aren't stuck but it doesn't seem to be sending any signal.

A s d f g keys not working on a wireless Apple keyboard for Imac

a s d f g keys not working on a wireless Apple keyboard for Imac.
When I type they on't work.
*Exmple o complete entence.
Plee help! Thi i very rutrtin. I on't wnt to ue cut n pte or ome letter.
Thnk you in vnce.

Make a Service appointment for the keyboard at your local AASP.
Apple - Find Locations
I'm not sure how old it is, but it is covered for 1 full year as long as it didn't take that 19 story dive.

Volume and brightness keys not working with new keyboard on imac

I just purchased a new wired keyboard for imac and brightness and volume control keys not working . i have tried adjusting keyboard settings. I have software version 10.5.8. Do I need to upgrade software. Thank you for any help.

Do you have "Automatically Adjust Brightness" check box ticked in System Preferences > Displays > Display ? If so, you can't manually adjust brightness.

Esc key not working in windows 7

Hi,
I have a HP Pavilion dv6-4XXX series. It's almost been 2 years I bought this notebook.
Recently I faced an issue. The "ESC KEY" has stopped working. However I could find that it's working fine in BIOS but not when I am logged in to windows. I have windows-7 installed.
Please let me know what could be the issue and the solution for the same.

Hello siddharthmishra,
You’re having a problem with the ESC key not working.
Go to device manager and uninstall the keyboard and restart the computer. This should uninstall and reinstall the driver for the keyboard.
Here is a link to device manager.
If the problem has not been happening for very long, you might try a System Restore. This will take the system back to before the problem started happening without affecting any of your files.
Here is a link to a System Restore.
Let me know how everything goes.

Command, option, ctrl, fn keys not working

thanks to a visiting dog who got tangled up the power adapter my laptop ended up on the floor, wide open with the keyboard popped out. I have inspected the connector cable and it looks OK to the naked eye. I disconnected the keyboard cable and re-connected.
When using an external USB keyboard all keys function normally. When using the built-in keyboard the only keys not working are the command, option, ctrl and fn keys. I have restored modifier keys to default (I had never changed them) but this did not help. I also toggled the "use F1-F12 to control..." option in the keyboard preferences to no avail and have restored keyboard shortcuts to no avail.
Is my keyboard shot? Is the a pref file I might delete?

Hi, Mel. If the external keyboard works properly, I'm afraid you have to figure your built-in KB has been dogged to death. I hope the pet owner will do the right thing by you. I also hope the KB is all that was damaged. How are your adapter cord, plug, and DC-In port? Does your battery still charge OK?
Whenever anything visits my house that's active, inattentive, and built low to the ground, my Powerbook runs on battery power only. I haven't seen one yet, but the new magnetically-connected, easily- and harmlessly-detached MacBook Pro AC adapters sound like a superb idea to me. Too bad our PBs can't use 'em.

N95 SHORT CUT KEY NOT WORKING

Anyone had any problems with there N95 top left shortcut key not working,mine won't do anything when pressed then suddenly has a mind of it's own and keep pressing it's self and sending blank text messages to my first contact in my address book...
Tried software load,no cure is it back to the shops..

my daughters as just started doing the same i have updated the software and had buttons changed but still the same

Keyboard: some keys not working

Some keys not working. Need help/suggestions. Not great with computers so PLEASE give details/steps re: how to do what you suggest - thanks!
Details: intel based iMac running snow leopard 10.6.8. Apple wireless/bluetooth keyboard (came with the iMac).
Some keys suddenly stopped working: space, tab, capLock, option key to the right of space bar (one on the left works), down arrow
The problem happens in various programs (safari, pages, etc)
The keyboard is fine on another iMac
A different keyboard is fine on this/the involved iMac
(nutshell: keyboard works fine - computer works fine, unless they're together)
Here's what's been tried/checked:
-checked the settings for universal access ("mouse keys" are off) and checked for any bluetooth keyboard shortcuts.
-in system preferences "speech" is not set for "speak selected text when the key is pressed" - this is not checked/selected
-tried creating a new user but had the same issue so it's computer-wide rather than just a user account
-removed the keyboard and reconnected (using the +/- signs and "disconnect" and putting in a new code of numbers to pair keyboard)
-language/text is set for english
-did the keyboard viewer and the keys in question did NOT highlight when pressed (but don't forget the entire keyboard is fine on a different computer so thekeys aren't the issue)
-"slow keys" is turned off re: keyboard in system preferences.
Any help is welcomed. It's frustrating knowing the keyboard works, just not with this computer. Please help. Many thanks!

yes - not sure how this works...if you can see my original post there are a lot of details in there. If you can't...
nutshell: the keyboard works on a different iMac
             a different keyboard works on this/the involved iMac
             I tried to create a different user and the keyboard still does not work so it is computer-wide
             I also removed the keyboard from the computer (using the +/- symbols and disconnecting and then repairing it. The problem remained
Thanks for any help. It's crazy that the keyboard is fine and the computer is fine but together, there's the problem.
Thank you!!!

Backspace key not working

Similar Messages

Maybe you are looking for