Backup 10g in WinXP

Can anyone explain in detail how:
I can perform a cold/offline, full database, physical backup to hard disk and schedule it at 1:00am every night and how I can do a cold/offline, full database, physical backup to tape drive and schedule it at 1:00am every thursday night. I need to do the whole thing in WinXP and without using any third party backup software. I will have to use only the tools that come with Oracle 10g installer.
Thanking you.
-Atiur

, physical backup to tapeYou need a MML API to do that, which is provided by the concerned vendor.
So, you cannot backup to tapes directly using oracle tools.

Similar Messages

Backup Issue with WinXP

I have an iPhone 3G and I'm trying to sync / backup the phone to a Windows XP computer. The computer is authorized and we have sync'd purchased music to the iPhone. The iPhone is running iOS 5.01 with iTunes 10.6.1.
When trying to sync the iPhone - it goes through the syncing process fine, though on Step 7, a window pops up that the iPhone is not connected. Then another window pops up with a message that iTunes could not connect to WinXP. We can't update the iPhone to 5.1 without first doing a successful backup. We ran diagnostics within iTunes - and all Tests checked out fine.
Any thoughts on what the issue might be?
Paul

I don't think you can disable Change Tracking and then restore the situation you were in. You would have to resync everything.
Whether you can delete rows from sys.syscommitab? Yes, but you should also do so when adviced and instructed by a Microsoft support engineer. I would strongly recommend that you open a case with Microsoft. Since this appears to be due to a malfunction in
the product, the case should be free of charge.
Erland Sommarskog, SQL Server MVP, [email protected]

Installing Oracle 10g on winxp 32 bit and getting error

Hi,
I have win 7 64 bit os installed .On which i have installed 32 bit winxp on the oracle virtual box.I m trying to install Oracle 10g on this.
For which i have downloaded Oracle Dev Suite from oracle website.
I have also installed Oracle SQL developer for writing queries.
When i right click on Çonnections in the Connection pane i say new connection
After which a window opens which asks me to fill database connection parameters viz.
Connection name : HR_ORCL
User Name : hr
Password hr
Connection Type : Basic
Role : Default
HostName : Localhost
Port 1521
SID : orcl
And then i hit test when i get an error :
Status : Failure-Test failed : IO Error : The Network Adapter could not establish the connection
What is causing this problem
Help !!!

I downloaded the oracle 10g developer suite disk1 and disk2 from the below link .
http://www.oracle.com/technetwork/developer-tools/developer-suite/downloads/101202winsoft-087370.html

Database recovery from the server backup - 10g Oracle with Linux

My server OS is Linux and nightly we are taking a whole logical volumes backup as it is and databses are not shutdown.
so i would like to know how much worth keeping this copy in recovery purposes as it is taking few hours to copy all daily.
If some one can share some points would be appriciated.

Hi,
What kind of backup is it please explain, what tool are you using for this logical volume backups? Are you sure that if you logical volume backup starts at 10:00, everything is logically frozen at that point in time and if recovery needed, everything will be restored at exact 10:00? Since oracle database is open on logical volumes, during backup of logical volumes, your database files will not be consistent and hence backup of database is not valid and will not work (unless you have some utility to logical freeze everything during backup to make backup consistent).
I would recommend you to configure the oracle database backup (hot or RMAN) and put backup on a logical volume and configure backup of that logical volume and remove the logical volume from backup list where your database exists. Database backup should finish before backup of logical volume statrts
Salman

Error installing 10g on WinXP

A couple of times during install of 10g I get the Error:
WS2_32.dll
The procedure entry point WSAProviderConfigChange could not be located in the dynamic link library WS2_32.dll
I have used a DLL inspect tool and the function IS there...
Any help much appreciated or I wasted .5G download!

I downloaded the oracle 10g developer suite disk1 and disk2 from the below link .
http://www.oracle.com/technetwork/developer-tools/developer-suite/downloads/101202winsoft-087370.html

How to build reports using discoverer (oracle 10g on winxp professional)

hello:
I have an sql query which queries multiple tables.
I have to build the report using oracle discoverer plus...can anybody guide me what is the path to accomplish this.
the sql is following
SELECT COUNTRY.ID, COUNTRY.NAME, CARRIER.NAME, COUNT(CARRIER.NAME) SUBSCRIBERS FROM COUNTRY, CARRIER, USER_DEVICE, USER_ WHERE
USER_DEVICE.APPLICATION_ID = 1 AND
USER_DEVICE.CARRIER_ID = CARRIER.ID AND
CARRIER.COUNTRY_ID = COUNTRY.ID AND
USER_DEVICE.USER_ID = USER_.ID
GROUP BY
COUNTRY.ID, COUNTRY.NAME, CARRIER.NAME ORDER BY COUNTRY.NAME, CARRIER.NAME
when i try to validate this query in oracle business intelligence administrator by building a complex folder the validator gives error and cannot validate...
please tell me how can i accomplish to run the above query using oracel discoverer

yes it worked like that...thanks...
now i want to add user defined parameters to it...
as the folder is a complex folder all the colums i get(in discoverer plus) are those which i am mentioning in my query...but i have to get the parameter based on column from another table User_ and i can't show that column in my query as the query won't work if i include it...
I hope I was able to make u understand my problem...
please tell me how can i build paramters from the USER_table
Waqas

Listener service not starting after installation (10g on WinXP)

Hi!
I installed 10.2.0.1 on a Windows XP machine, but for some reason the listener service does not start up. If I start the service from the Windows service control panel I get:
The service "OracleOraDB10g_home1TNSListener" on "Local Computer" could not be started. Error 3: The system could not find the specified path."
The path for the servicing exe is "G:\oracle\product\10.2.0\db_1\BIN\TNSLSNR", which is the correct path.
Executing "lsnrctl status" I get:
{code}
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 27-MAI-2009 09:53:37
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xpdeveloper)(PORT=1521)))
TNS-12541: TNS: No Listener
TNS-12560: TNS: Error with protocol adapter
TNS-00511: No Listener
32-bit Windows Error: 61: Unknown error
{code}
Executing "lsnrctl start" I get:
{code}
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 27-MAI-2009 10:02:10
Copyright (c) 1991, 2005, Oracle. All rights reserved.
tnslsnr is getting started: Please wait...
Failed to start service, error 3.
TNS-12560: TNS: Error with protocol adapter
TNS-00530: Error with protocol adapter
{code}
When I open a another command shell and run the servicing exe "G:\oracle\product\10.2.0\db_1\BIN\TNSLSNR" directly and executing "lsnrctl status" I get:
{code}
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 27-MAI-2009 10:10:27
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xpdeveloper)(PORT=1521)))
STATUS des LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Startdatum 27-MAI-2009 10:10:17
Uptime 0 Tage 0 Std. 0 Min. 10 Sek.
Trace-Ebene off
Sicherheit ON: Local OS Authentication
SNMP OFF
Parameterdatei des Listener G:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log-Datei des Listener G:\oracle\product\10.2.0\db_1\network\log\listener.log
Zusammenfassung Listening-Endpunkte...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xpdeveloper)(PORT=1521)))
Der Listener unterst³tzt keine Services
Der Befehl wurde erfolgreich ausgef³hrt.
{code}
I can also successfully tnsping the listener.
Any ideas why the listener service fails to start?
Thanks a lot for your help,
Marcus

Hi Florian,
my understanding was that on Windows ORACLE_HOME is stored in the registry.
I have a correct path to my Oracle home directory under "HKLM\Software\Oracle\KEY_OraDB10g_home1\ORACLE_HOME".
Following your suggestion, I added a Windows environment variable "ORACLE_HOME" that points to the Oracle home directory, rebooted and tried to start the service again, but nothing changed.
Marcus

Where is the Backup directory in WinXP?

I would like to be sure I am backing up the back up.
Also, is it possible to specify a different directory than a default one? I'd like all data of this type to go to an external drive.
Cheers and thanks,
Arthur

I had spent too much time wandering cluelessly around the Help system and Find in Finder, resulting only in frustration.
Your answer provided a quick and easy link to the information I needed.
Very Helpful!
Thank you.

Rman backup error in 10g rac

hi,
I am backup 10g rac with rman,but there is some error when backup:
input datafile fno=00006 name=+DG1/orcl/datafile/undotbs3.265.623622323
channel c3: starting piece 1 at 13-JUN-07
RMAN-03009: failure of backup command on c1 channel at 06/13/2007 08:40:50
ORA-19504: failed to create file "/oracle/rman/db_ORCL_20070613_0fik5ji0_1_1_L0"
ORA-27040: file create error, unable to create file
Linux Error: 2: No such file or directory
channel c1 disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on c3 channel at 06/13/2007 08:40:51
ORA-19504: failed to create file "/oracle/rman/db_ORCL_20070613_0hik5jna_1_1_L0"
ORA-27040: file create error, unable to create file
Linux Error: 2: No such file or directory
channel c3 disabled, job failed on it will be run on another channel
released channel: c1
released channel: c2
released channel: c3
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of release command at 06/13/2007 08:49:22
RMAN-06012: channel: c1 not allocated

Hi all I have the same problem. We have a 2 node rac with ASM. The archives goes to ASM. I would like to backup the archives from ASM to a filesystem. But i was given a filesystem that is only mounted on one node and it is not accessbile to the other node. When i run the following rman command i get the error on one of the channel that connect to node 2.
My question:
Can i use on channel that is connecting to node1 to backup all the archivelogs generated by node1 and node2 aswell since both the nodes have access to archive logs.
Please assist.
connect target /
connect catalog rmanrep/[email protected]
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/opt/oracle/archive/orcl/rman/cf_%d_%T_%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
CONFIGURE CHANNEL 1 DEVICE TYPE DISK CONNECT 'SYS/oass@orcl1;
CONFIGURE CHANNEL 2 DEVICE TYPE DISK CONNECT 'SYS/oass@orcl2';
BACKUP CURRENT CONTROLFILE;
backup archivelog all format '/opt/oracle/archive/orcl/arch_bkup/%d_AL_%T_%u_s%s_p%p' delete input;
EXIT;
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 03/17/2009 21:00:25
ORA-19504: failed to create file "/opt/oracle/archive/orcl/arch_bkup/SPTDEV_AL_20090317_2kka60j6_s84_p1"
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 2: No such file or directory
channel ORA_DISK_2 disabled, job failed on it will be run on another channel
Thanks
Kart

Oracle RAC 10g on Windows XP Professional

Hi All,
I read many articlaes that we can not install Oracle 10g RAC on Windows xp professional but the problem is I have a laptop where I am installing VMWARE with Unix O/S I can not upgrade my XP to Server edition as I do not have money o buy license.
Please help me what all files I need to change to make my XP one of the nodes os RAC 10g.

Thanks for replying.
Can by downloading the kit,I will be able to install Oracle RAC?
My question was:
I have windows xp on my machine.I have vmware software also.I need to install Oracle RAC 10g on winxp and an guest opertaing system which will be linux.I want to test RAC by making 1 node on linux and one node on guest operating system winxp.
Problem is RAC can only be installed on Server edition.Can it be possible to do it on WinXP?

Rman And user Managed backup

Hi,
I have following question
User Managed backup
1)when i take user mananged backup i want to know whether DDL operation is permitted or not
2) when i take user mananged backup i want to know whether WE ADD/REMOVE TABLESPACE ??
Rman backup
1)when i take RMAN backup i want to know whether DDL operation is permitted or not
2) when i take Rman backup i want to know whether WE ADD/REMOVE TABLESPACE ??
Regards

Hi,
Please go through the below links to get much familiar with user managed backup's and rman backup's.
Oracle9i User-Managed Backup and Recovery Guide
Release 2 (9.2)
http://download.oracle.com/docs/cd/B10501_01/server.920/a96572/toc.htm
Making User-Managed Backups
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/osbackup.htm
Oracle9i Recovery Manager (RMAN)
http://www.oracle-base.com/articles/9i/RecoveryManager9i.php
RMAN Backup Concepts (11g R1)
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmcncpt.htm
Overview of RMAN Backups (10g R2)
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/bkup001.htm
Oracle RMAN Backups: Pushing the "Easy" Button
http://www.oracle.com/technetwork/articles/havewala-rman-grid-089150.html
Hope this helps you understand clearly about both the user managed backups and rman backups. :)
Thanks,
Balaji K.

HT1382 How do you restore iTunes v10 backup (on DVDs) onto iTunes v11?

On Windows XP, I backed up my iTunes v10.1 library to DVDs, then did a fresh install of WinXP and the current iTunes v11.1. I authorized the new iTunes and inserted disc 1 of my iTunes backup, but I get no dialog to restore (tried the last disc in the backup set as well), nor can I find any restore options in the menus. I also have a full system backup from old WinXP system, if needed. Any help would be appreciated. One of the reasons I instigated this is because I could not upgrade IOS v4.3 on my 4th gen iPod Touch because I couldn't upgrade iTunes on my WinXP system (would get server not found error).

You should delete the current iTunes folder in <User's Music> before restoring the backup into that folder. There is a hidden preference file that controls folder structure that might otherwise be wrong, and the new library would have created some stub folders for cached artwork which would be redundant.
if iTunes won't update then tearing out all Apple components, rebooting, and reinstalling usually works. If there are still problems there is an MSI cleanup tool that sometimes helps.
Going forward see this backup tip.
tt2

Problem Displaying image from blob

Hi all,
I m using,
Database : 10g Rel 2
Frontend : DevSuite 10g
OS : WinXp
Browser : IE 6
Problem : In my forms i m displaying images from blob column but some of the images are not displayed. I have tried with all image formats available in combination with all available display quality but no luck. What could be the reason for it and how do i solve it?
Can anyone help me plz?
Thnx in advance.
Imtiaz

Hello,
It is very difficult for us to "guess" what images you can read and what others you cannot.
Maybe you could provide more information on images that are not displayed ?
What is their native format ?
Francois

Schedule rman script in Windows 2003

Oracle 10.2. I wrote a rman script and tried to schedule auto run in Windows 2003 server. I got this errors:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12560: TNS:protocol adapter error
The batch file name: rman_backup.bat
content: rman target / cmdfile rman_backup.rcv log rman_backup.log
Here is how I set it up:
go to Control Panel>Scheduled Tasks>Add Scheduled Task, find rman_backup.bat, choose the run time and finish it. When asking for user name and password, I supply the user which is in oracle dba group.
But when it run, it just produced the above error and won't run.
Please advise
S.
in SQLnet.log
fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleORCL)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=D:\oracle\product\10.2.0\db_1\bin\rman.exe)(HOST=W3TY5Z203)(USER=WELC))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.4.0 - Production
Time: 30-MAR-2010 11:27:00
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0

here is example of script we are using to backup database from windows scheduler:
set oracle_home=d:\oracle\ora920
set path=d:\perl\bin;d:\oracle\ora920\bin;c:\winnt;c:\WINDOWS\system32;
set PERL5LIB=''
set NLS_LANG=AMERICAN_AMERICA.WE8MSWIN1252
set TNS_ADMIN=d:\oracle\ora920\network\admin
d:
cd \scripts
set oracle_sid=car
rman target sys/car_$z3br4 catalog rman/oemrp_pwd@oemrp @rman_level0_car.rman > rman_level0_car.log
perl email_log.pl "RMAN Level 0 Log" d:\scripts\rman_level0_car.log CARthis script backing up 9i database. 10g and 11g database we backing up via EM grid control.
You can change this script to backup 10g or 11g databses as well.

Forms6i on MS Term Svr ... works fine odd color at times, trying to fathom

Yes, I know, don't tell me, it's not a supported combination. But, hey, it works. 200 users on a whiz-bang server with loads of mem / disk space, DB on another box, all reasonably well tuned, no performance issues -- and I'm not dealing with users' desktop issues anymore!!!! Yippee!!!! Used Forms5 against 9i for about 5 yrs with no problems also.
But here's the odd thing (and it occurred on the old F5/9i on WinNT Term Svr and on the new, current F6/10g Win2k TS) ...
On our "normal" local client developer boxes ... with the Developer Suite ... we've got teal-colored forms for accepting report request parameters (normal data-entry forms are dull grey), all via templates, all used for years, not a coding problem ... and these forms look fine, run fine. We put these forms on the terminal server ... and blocks on the form are suddenly this lighter teal color ... and, while they're nice even blocks, they just look ... weird.
So ... in normal local client-server mode (F6i against 10g on WinXP), no issue (and thus is not "strictly speaking" and Oracle support issue), but in F6i / 10g via Win2k3 App server, in Terminal Services mode, odd color blocks. Not a rights issue or a domain issue. If I go physically to server and run app from there directly, no issue. So the form per se isn't wrong. Different users use different resolutions for stuff, depending on their physical screen size and wish to use eyeglasses.
So ... anyone else out there in the Terminal Server user world, who has ALSO seen this odd coloration and found a way to resolve it?
I don't know that it's strictly an Oracle Forms thing ... our reports mostly convert to PDF format, and when the server serves up the Acrobat Reader output ... the navigation arrows have this weird green highlight that goes away once your mouse is held over it.
We know how to program lots of things, but not these particular ones, so "we didn't do it, honest". All clues / insights welcome, and TIA for your time. Am going to look on MS forums also.
Suzanne Michelle, NYC Transit

I'm afraid I haven't all the details, but as I understand it, higher color depths actually blend colors proportionally, whereas Windows' 256-color VGA mode uses an indexed color palette.
I can only recommend that you try Googling this topic on Google Groups (http://groups.google.com), using keywords like Terminal Server and 256-color. This should point you to discussions that give a better idea of your problem, and might explain broad solutions to it, allowing you to "fix" Oracle and Acrobat with a single remedy.
As far as tweaking Oracle goes, search (again) Google on the topic of creating custom color schemes for 10g. I'll take a look myself, time permitting, and post whatever information I can find to the forum.
Hope this helps,
Eric Adamson
Lansing, Michigan

Backup 10g in WinXP

Similar Messages

Maybe you are looking for