Backup 3.1.2 - Break up FULL backups into Parts (Locally)
I use "Backup" for local and iDisk backups. I noticed when I backup to iDisk, Backup automatically breaks up a full backup into several parts. How can force Backup to break up a large backup locally? Breaking it up would make for easier copies over to my iDisk than these massive files I'm trying to move over. See below for more detail on my issue. Thanks!
--- I have a large iTunes and iPhoto libs - 5GBs and 11GBs that I would like to back up to iDisk. Backing it up directly to iDisk hasn't worked for me. What I do instead is back it up locally using "Backup", then I copy it over to iDisk. However, I'm having problems copying these large files. I'm getting Error Code 0 when trying to move them.
You might want to take a look at this similar thread in the Backup forum:
http://discussions.apple.com/thread.jspa?threadID=2016476&tstart=0
Similar Messages
-
Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated. -
Accidentally deleted Time Machine backups into Trash...
I messed up big time -- I moved my Time Machine backups into Trash from Finder. I've looked around online and it seems like I've really screwed myself over. I can't reformat/erase the disk because I have about 1.4 TB of other material on it and I don't have any other disk big enough to temporarily hold all these files. Is there any way to either restore or delete the backups without harming the rest of the files on the disk?
Full Details Here from Pondini....
Can't empty the trash after deleting backups via the Finder -
RMAN backup into multiple locations
Hi All,
Our database size is 1.4 TB. I am planning to schedule RMAN full backu. But i do not have mount point of size 1.4 TB. We have mount point /rmanbkp1 of size 1200GB and /rmanbkp2 of size 200GB. How can i distribute RMAN backup to these two filesystems.
Can i take tablespace level backups..?
Please suggest.
Thanks
Sandeep VadlamudiHello;
First of all 1200GB, might be enough since you probably are not using all the blocks in the 1.4 TB and will compress you will also lose less.
Can i take tablespace level backups..?
Yes but the value is limited. You cannot for example recover a dropped tablespace.
Test a backup first and get an idea of how much space you really need.
Also once you have a backup how do you free space for the next backup?
You could use the FORMAT command to backup the database to one location and the Archive to the other. 200 GB is not much space.
RMAN backup into more than one location :
http://www.oracle-class.com/?p=2043
Best Regards
mseberg -
Are Virtual Copies saved in Backups? How do I insert a backup into an existing catalog?
Are Virtual Copies saved in Backups? How do I insert a backup into an existing catalog
I deleted a tif image file that I didn't intend to, which had several LR virtual copies created from it. The virtual copies had a lot of important history that document my print preparation edits. Are these virtual copies saved in the LR backups?
If so, how can I insert them into the catalog I am using? I have made a lot of edits in the two days since my last backup and don't want to lose that history either. Do you suggest I make a current backup before retrieving files from my last backup? I know I'm supposed to go to the backup location and open the last backup, but how do I blend that with the current work from the last 2 days?
Any help would be most appreciated. Thanks, TomRob,
That was exactly what I was after. However, I'm still having trouble getting the virtual copies imported. The master file was in my trash, I restored it to the original hard drive folder. Before I got your message I re- imported it to LR but of course LR came up with a new name since I was importing from and saving it to the same folder in LR. And of course no copies. This may have been a mistake, but before starting the procedure you described, I re-named the master file (it seemed that the import from backup would re-create it so I didn't want a conflict).
Then I did what you said and used the 'Import From Another Catalog' feature. I found the virtual copies in the backup and checked them. But when the import completed, the it gave me file names xxx/Copy1, xxx/Copy2 but there was no image or history or metadata. When I tried to find the folder containing the files, it said it couldn't be found. So I missed something in the settings. When I tried again, there was a warning saying the file(s) exists in the catalog and its settings differ. I went ahead anyway and the message I got was "No Photos in previous import"
Here's what the import from backup shows:
A box with catalog contents and all the folders and files within them, that you can check.
A New Photos section, which gives 2 file handling choices: a)add new photos to the catalog without moving them or b) don't import new photos
A Changed existing photos section with 2 replace options: a) nothing or b) Metadata and develop setting only. If you choose this you can check a box to preserve old settings as a virtual copy.
Not sure what to do. I changed the master file back to its original name, but that didn't make a difference. Suggestions? Thanks, Tom -
Dear all,
I am copying the daily backup into tape in case of failure, however I got error message.
Herer are the scripts:
1) backup_tape_uat.sh
#!/bin/sh
RS_EMAIL="[email protected]"
cd /u02/db/backup/RMAN
find *.bck -print | /usr/sbin/backup -ivqf /dev/rmt0.1
/u02/oracle/uat/uatdb/9.2.0/dbs/uat_tape_check.sh
/usr/bin/mail -v -s "UAT DB Tape Backup Completed" $RS_EMAIL
2) uat_tape_check.sh
#!/bin/sh
TAPE_LOG="/u02/oracle/uat/uatdb/9.2.0/dbs/uat_backup_tape_log"
VERIFY_LOG="/u02/oracle/uat/uatdb/9.2.0/dbs/obs_backup_verification_log"
EMAIL_SCRIPT="/home/oracle/rsbackup/UAT/rs_email_log.sh"
RS_EMAIL="[email protected]"
rm -f ${TAPE_LOG}
rm -f ${VERIFY_LOG}
mt -f /dev/rmt0 rewind
restore -Tvqf /dev/rmt0.1 >> ${TAPE_LOG}
restore -Tvqf /dev/rmt0.1 >> ${TAPE_LOG}
restore -Tvqf /dev/rmt0.1 >> ${TAPE_LOG}
restore -Tvqf /dev/rmt0.1 >> ${TAPE_LOG}
tail -50 ${TAPE_LOG} >> ${VERIFY_LOG}
${EMAIL_SCRIPT} ${RS_EMAIL} ${VERIFY_LOG} "Backup UAT DB to Tape Verification Log"
3) Execute the scripts
$ ./backup_tape_uat.sh
Backing up to /dev/rmt0.1.
Cluster 51200 bytes (100 blocks).
Volume 1 on /dev/rmt0.1
a 52963840 backup_UAT_668721603_515_1_g3jtnoe3_1_1.bck
a 4145045504 backup_UAT_668721610_516_1_g4jtnoea_1_1.bck
a 4637351936 backup_UAT_668721835_517_1_g5jtnolb_1_1.bck
a 3630170112 backup_UAT_668722071_518_1_g6jtnosn_1_1.bck
a 4228505600 backup_UAT_668722287_519_1_g7jtnp3f_1_1.bck
a 4497604608 backup_UAT_668722513_520_1_g8jtnpah_1_1.bck
a 3073245184 backup_UAT_668722750_521_1_g9jtnphu_1_1.bck
a 3239075840 backup_UAT_668722946_522_1_gajtnpo2_1_1.bck
a 3325440 backup_UAT_668723152_523_1_gbjtnpug_1_1.bck
a 7012352 backup_UAT_668723156_525_1_gdjtnpuk_1_1.bck
a 49152 backup_UAT_668723158_526_1_gejtnpum_1_1.bck
a 23411712 backup_UAT_668732402_528_1_ggjto2vi_1_1.bck
a 507904 backup_UAT_668732409_529_1_ghjto2vp_1_1.bck
a 499712 backup_UAT_668732525_530_1_gijto33d_1_1.bck
a 1294336 backup_UAT_668732641_531_1_gjjto371_1_1.bck
a 524288 backup_UAT_668732756_532_1_gkjto3ak_1_1.bck
a 499712 backup_UAT_668732872_533_1_gljto3e8_1_1.bck
a 5308416 backup_UAT_668732988_534_1_gmjto3hs_1_1.bck
a 507904 backup_UAT_668733104_535_1_gnjto3lg_1_1.bck
a 1812992 backup_UAT_668733220_536_1_gojto3p4_1_1.bck
a 7012352 backup_UAT_668733223_538_1_gqjto3p7_1_1.bck
a 49152 backup_UAT_668733224_539_1_grjto3p8_1_1.bck
a 216773632 backup_UAT_668818803_541_1_gtjtqnbj_1_1.bck
a 516096 backup_UAT_668818823_542_1_gujtqnc7_1_1.bck
a 499712 backup_UAT_668818939_543_1_gvjtqnfr_1_1.bck
a 3268608 backup_UAT_668819055_544_1_h0jtqnjf_1_1.bck
a 540672 backup_UAT_668819171_545_1_h1jtqnn3_1_1.bck
a 499712 backup_UAT_668819287_546_1_h2jtqnqn_1_1.bck
a 15695872 backup_UAT_668819403_547_1_h3jtqnub_1_1.bck
a 507904 backup_UAT_668819519_548_1_h4jtqo1v_1_1.bck
a 1788928 backup_UAT_668819635_549_1_h5jtqo5j_1_1.bck
a 7012352 backup_UAT_668819638_551_1_h7jtqo5m_1_1.bck
a 49152 backup_UAT_668819639_552_1_h8jtqo5n_1_1.bck
a 246164992 backup_UAT_668905203_554_1_hajttbnj_1_1.bck
a 933888 backup_UAT_668905223_555_1_hbjttbo7_1_1.bck
a 778240 backup_UAT_668905339_556_1_hcjttbrr_1_1.bck
a 4014080 backup_UAT_668905454_557_1_hdjttbve_1_1.bck
a 909312 backup_UAT_668905570_558_1_hejttc32_1_1.bck
a 647168 backup_UAT_668905686_559_1_hfjttc6m_1_1.bck
a 18685952 backup_UAT_668905802_560_1_hgjttcaa_1_1.bck
a 1015808 backup_UAT_668905918_561_1_hhjttcdu_1_1.bck
a 1812992 backup_UAT_668906034_562_1_hijttchi_1_1.bck
a 7012352 backup_UAT_668906037_564_1_hkjttchl_1_1.bck
a 49152 backup_UAT_668906038_565_1_hljttchm_1_1.bck
a 639479296 backup_UAT_669291304_567_1_hnju94p8_1_1.bck
a 639499264 backup_UAT_669291342_568_1_hoju94qe_1_1.bck
a 635861504 backup_UAT_669291380_569_1_hpju94rk_1_1.bck
a 1024000 backup_UAT_669291420_570_1_hqju94ss_1_1.bck
a 72122368 backup_UAT_669291536_571_1_hrju950g_1_1.bck
a 185425920 backup_UAT_669291652_572_1_hsju9544_1_1.bck
a 102334464 backup_UAT_669291779_573_1_htju9583_1_1.bck
a 671744 backup_UAT_669291905_574_1_huju95c1_1_1.bck
a 196943872 backup_UAT_669292021_575_1_hvju95fl_1_1.bck
a 1048576 backup_UAT_669292147_576_1_i0ju95jj_1_1.bck
a 2069504 backup_UAT_669292263_577_1_i1ju95n7_1_1.bck
a 7012352 backup_UAT_669292266_579_1_i3ju95na_1_1.bck
a 49152 backup_UAT_669292267_580_1_i4ju95nb_1_1.bck
a 7028736 c-1357907388-20081021-02.bck
a 7028736 c-1357907388-20081021-03.bck
a 7028736 c-1357907388-20081021-04.bck
a 7028736 c-1357907388-20081021-05.bck
a 7028736 c-1357907388-20081022-00.bck
a 7028736 c-1357907388-20081022-01.bck
a 7028736 c-1357907388-20081023-00.bck
a 7028736 c-1357907388-20081023-01.bck
a 7028736 c-1357907388-20081028-00.bck
a 7028736 c-1357907388-20081028-01.bck
The total size is 30638784000 bytes.
Backup finished on Tue Oct 28 18:05:17 HKT 2008; there are 59841400 blocks on 1 volumes.
/u02/oracle/uat/uatdb/9.2.0/dbs/uat_tape_check.sh[13]: restore: not found.
/u02/oracle/uat/uatdb/9.2.0/dbs/uat_tape_check.sh[14]: restore: not found.
/u02/oracle/uat/uatdb/9.2.0/dbs/uat_tape_check.sh[15]: restore: not found.
/u02/oracle/uat/uatdb/9.2.0/dbs/uat_tape_check.sh[16]: restore: not found.
What errors are the last few statement?
AmyHi Amy,
From the errors you provided:
The total size is 30638784000 bytes.
Backup finished on Tue Oct 28 18:05:17 HKT 2008; there are 59841400 blocks on 1 volumes.
/u02/oracle/uat/uatdb/9.2.0/dbs/uat_tape_check.sh13: restore: not found.
/u02/oracle/uat/uatdb/9.2.0/dbs/uat_tape_check.sh14: restore: not found.
/u02/oracle/uat/uatdb/9.2.0/dbs/uat_tape_check.sh15: restore: not found.
/u02/oracle/uat/uatdb/9.2.0/dbs/uat_tape_check.sh16: restore: not found.
It looks like it cannot find the backups from tape and thus your backup scripts are not able to execute.
Regards,
Ben -
I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send screen shots of all of the drive location where the drive is still good and I can see my Adobe Acrobat pro information, but the download itself is missing. NEXT STEP?
If you are talking about Reader (you did post in the Reader forum), then just download http://get.adobe.com/reader/enterprise. However Reader is free not purchasable. You can download a trial then install using your serial number, which if you didn’t register or write down somewhere you will be out of luck to track down.
Download a free trial or buy Adobe products | Adobe downloads -
iTunes tells me, that I need to load version 11.1 in order to load a backup into my iPhone 5. I'm working with a windows PC and want to update my phone to iOS 7GM. version 11.0.5 is the highest I can get for windows. Can somebody help me?
I'm assuming you followed a forum like Gizmodo to load the latest version of iOS 7 Beta on your device
Alot of those forums forget to mention, iTunes 11.0.5 will allow you to update to the iOS 7 Beta but your device will no longer work unless you have the developer version of iTunes as well....
I'd suggest you to research how to downgrade back to 6.1.3/4 and wait a few days for the iOS to be released, -
Import data backup into another DB instance
Hello all.
I need to import a Data Backup into Another Database instance. MaxDb version 7.3.
On higher versions of MaxDb I performed this operation without any problems (http://help.sap.com/erp2005_ehp_04/helpdata/EN/43/d5ebc2c9ed3ab3e10000000a422035/frameset.htm).
For this version of MaxDB I have such problem:
the commands don't coincide with help description, I define backup template, transfer DB instance to admin state, open utility session and try to srart recovery (there is no command db_activate RECOVER <template>)
dbmcli on Q46>util_connect
OK
dbmcli on Q46>recover_start DEMO
ERR
-24988,ERR_SQL: sql error
-903,Message not available,blockcount mismatch
What I can do? How can I start recover from data backup from another DB on this version of MaxDB?I have tried to perform backup of original system and recovery to another database one more time.
There is the another error:
dbmcli on Q46>recover_start DemoD46_recover
ERR
-24988,ERR_SQL: sql error
-3014,Invalid end of SQL statement -
I have been restoring the backup into a new iphone for a week. My pictures do not get restored however. Is there anything I can do?
Not unless the phone was backed up to the icloud or in iTunes at some point. I know you said it's crushed but can it be connected to a computer? If so you can still back it up in iTunes and then when the new phone comes use iTunes to restore that back up on it.
-
Where can I see my camera roll's photos which already backup into the icloud on my win7 pc ? I tried open in icloud control panel but only can see my photo's stream
leonsee94 wrote:
Where can I see my camera roll's photos which already backup into the icloud on my win7 pc ?
You cannot see photos backed up in iCloud on your computer.
Camera Roll photos backed up to iCloud are still in your Camera Roll on your iPhone.
You need to regularly sync the photos to your computer. (then you can see them on your computer).
-> http://support.apple.com/kb/HT1296
then delete them from your Camera Roll.
You can sync the photos you want on your iPhone back to your iPhone using iTunes.
-> http://support.apple.com/kb/HT4236 -
Can I plug in (restore) an RMAN tablespace backup into another DB ?
11.2.0.3/AIX 6.1
We accidently dropped a development DB without taking the latest expdp backup of an important schema. All the objects on this schema belonged to only one tablespace and we have the RMAN backup of that tablespace. Is there anyway we could recreate that schema by restoring the tablespace backup into another database ?Yes.
Use the TRANSPORT TABLESPACE feature/method :
http://oracle.su/docs/11g/backup.112/e10643/rcmsynta2021.htm
Also check out sys.dbms_tts.transport_set_check
RMAN> transport tablespace emp_data, emp_data2
tablespace destination '/u01/app/oracle/oradata'
auxiliary destination '/u04/app/oracle/oradata';If you need to check your endian format use this query :
SELECT
PLATFORM_NAME,
ENDIAN_FORMAT
FROM
V$TRANSPORTABLE_PLATFORM;http://www.fadalti.com/oracle/database/how_to_transportable_tablespaces.htm
http://husnusensoy.wordpress.com/2008/07/12/migrating-data-using-transportable-tablespacetts/
Best Regards
mseberg -
Hi All,
We are able to take sybase backup successfully into drive but when we take backup into tape drive or when we move backup into tape drive, we are unable to do that as we are getting an error. Do we need to mount tape drive or how we configure tape drive in syabse..
Thanks,
SamHi Bret,
Thanks. We are now able to take backup into tape drive sucessfully.
dump database SID to " T:\sybase\SID"
go
Thanks,
Sam -
I have restored a backup into a new iPad but it did not downloaded all my photos. There is a message saying " downloading 515 of 1230" but it never finishes downloading. How can I get all my photod downloadeda.
Sorry this solution is late but I just got off of the phone with Apple support and this worked.
Open iTunes
Connect your iPhone and keep it connected during this entire process.
In the iTunes menu at the very top (File, Edit, View) choose STORE> Sign in and sign into your iTunes account.
Once this is complete look at the upper right corner of iTunes and you will see an iPhone and Store button, cick STORE. Now you will be in the iTunes store where you see the advertisements of the various albums, songs etc. Look on your upper left of the window for your itunes account name and in the black band next to your iTunes account name, you will see a House icon, then Music, Movies, TV Shows etc.
Make sure the HOUSE icon is selected.
Stay on this screen in iTunes and on the lower RIGHT, you will see an area that says- QUICK LINKS. In that area click - Purchased
After you do this you will be transported to another area of iTunes. Here there will be a menu across the top- Music, Movies, TV Shows, Apps, Books are the choices.
Choose APPS and you will see the apps that you have purchased. You will also see the apps that didn't download to your phone.
Find the apps that didn't download and click the cloud next to their name. Doing this will download the chosen apps to the computer you are on.
Once you have downloaded the apps in question, in the upper right corner click LIBRARY.
Now you should see the button that says iPhone because your phone is still plugged in. Click the iPhone button and then click SYNC on the lower right to sync your iPhone.
The apps you downloaded will now be on your phone.
Sorry for the long instructions but this is what works. -
Split of full pallets into multiple cases and each cases with SU num.
I have full pallets (SU managed) lying in the hibay.
I have another storage type full case storage type with fixed bins always relplenished from hibay.
Hence, I create a replenishment transfer order to fill the full case area..
we pick the full cases by breaking a full pallet from the hibay.
and put these cases on the conveyor to shift to full case area.
Since, individual cases are shifted via conveyor an identity is required on each case. Hence each case should have an SU number on the box.
Replenishement TO confirmation (2 step) is done thro RF
Please suggest how this can be achieved.
Appericiated and will be awarded points for feasible solution.Please ignore my previous reply.
See my material (in many boxes on a pallet) is already moved to hibay from the goods receipt area.(Identification point won't work)
And the pallet is with SU number
e.g Material is in 10 boxes on 1 pallet with a SU number for the pallet.
Now I want to move the 10 boxes leaving the pallet to another storage type by having SU number on each box.
Maybe you are looking for
-
How to Print the DeliveryNote in SAPB1 Programatically.
How can one print the deliverynote that is added in the SAPB1 using the SAP DI SDK . This option is available in the SAP UI in the Administration -> Print Preferences -> PerDocument . How can this be done using SAP DI Sdk .
-
IT will stream photos and music and photostream (screensaver), but no mirroring, not even the icon??
-
I am using Photo shop Elements 4.0, but I am having problems now reconnecting my photos, they show up with a red circle on upper left corner. Is there a way to enlarge Font on work area? It is so small and on a dark gray back ground. Please help me o
-
Hi all, I have a question that how can we place a tabset after a region(under the region). Consider that a page having a regions region1. In region1 i have placed some page items. After the Region i am trying to place a tabset(service management,Serv
-
I had bought 1 gig of additional data after I activated my moto g in july. going by the amount of non wifi data I've used on my phone I should still have data available on my phone where the additional data package is good for 90 days or until I've