Backup a pc to time capsule
Can a Windows XP PC be backed up to an Airport Time Capsule? If so, what is the process?
Yes. You will need to get a backup application that runs under Windows and is capable of sending the backup data over the network.
Allan
Similar Messages
-
time machine couldn't complete the backup to johns airport time capsule. the backup disk is not available
You may find answers at Pondini's Time Machine FAQ for help with all things related to Time Machine.
-
The backup disk image “/Volumes/Time Capsule Disk/Earl Burroughs’s MacBook Pro.sparsebundle” is already in use. This is the message I get when it tries to back up, it had been working fine prior to this.....
The Backup disk image ... sparsebundle ... is already in use.
-
When trying to use my time machine got an error message "Time Machine could not complete the backup.
The backup disk image “/Volumes/ Time Capsul/ MacBook Pro.sparsebundle” could not be accessed (error -1).
Any ideas?I have not found a long-term solution (fix), but in my case the volume where the Time Machine backup should occur usually is mounted on the desktop but not as a shared volume (incidated as a drive with the people holding hands superimposed over the drive icon). If I drag the drive to the trash (unmount it), the next time Time Machine is scheduled to run, it completes successfully.
-
I keep getting this message: The backup disk image “/Volumes/Time Capsule/Coyner’s iMac.sparsebundle” is already in use. What should I do?
SeoulTom (Coyner)Make sure that no other Macs are backing up at the time
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the Time Capsule
Wait a few minutes, then try a backup again
Check to make sure that you are running firmware 7.6.4 on the Time Capsule -
The last date of my back up was 10/4- keeps saying The backup disk image "/backup disk image "/Volumes/time Capsule/ cheryl lynott's MacBook.sparsebundle" is already in use?
HELP -- what does this mean -- .......
Often, this error can be corrected by pulling the power on the Time Capsule, waiting a few minutes, and powering the Time Capsule back up.
See # C12 for more tips
http://pondini.org/TM/Troubleshooting.html -
HT1175 How do I access the backup data on the Time Capsule?
I can't find the directions on how to access my backup data on the Time Capsule.
The Time Capsule I have is the Apple APTC2TB, not the newest version.
Thanks for any help.Our forum expert Pondini has done a huge service with all his help..
Please read the FAQ..
http://pondini.org/TM/FAQ.html
Q14-17 cover restore.
There are also instructions in several places.. for instance using migration or setup assistant.
http://pondini.org/TM/Home.html
Also troubleshooting section..
James who wrote it died before he could get to Mavericks.. but most of it is still relevant. -
Time Machine couldn't complete the backup to "Steve's Time Capsule".
Time Machine couldn’t complete the backup to “Steve's Time Capsule”.
I get this error msg occasionally & suspect it's an easy fix but anybody know how to fix this one?
Thanks,
SteveReboot the TC.. The computer is not smart enough to remember where it left it.. network bug.
-
Time machine backups wont move to time capsule
i have two mac minis, one is the mid 2010 model and the the other one is a 2006 model. i have successfuly used superduper to finally move my 500 gigs
of time machine backups to the new time capsule. but the older 2006 model has me lost. i am tempted to go to the applestore to make them copy it
if i follow the directions including resetting time machine the best i can get is a pop up box every hour that says the identity of the time capsule cannot
be verified. this does not show up on the 2010 mini
when i tell it to pick the drive theres 2 other drives that i dont even have! those are "HOME" and "NET" on "localhost" i have no idea where its getting
those drive paths. maybe its my readynas , when i go to /Volumes, there is no home or net folders
another problem i have with time machine is for some strange reason there is a range of backups in an old sparse bundle file and i would like to move all the backups for this computer into one main directory, instead of having to browse old time machines. but when i try to copy from one sprarse bundle to another i get an error saying that the backup files cannot be modifiedrigormortis wrote:
if i follow the directions including resetting time machine the best i can get is a pop up box every hour that says the identity of the time capsule cannot
be verified.
Is that the message in #C15 of Time Machine - Troubleshooting? If so, are you selecting Use This Disk? If not, exactly what does it say (or post a screenshot).
another problem i have with time machine is for some strange reason there is a range of backups in an old sparse bundle file and i would like to move all the backups for this computer into one main directory, instead of having to browse old time machines. but when i try to copy from one sprarse bundle to another i get an error saying that the backup files cannot be modified
That's correct; you cannot merge one set of backups into another. A set of TM backups has a complex structure, with things all linked together; you cannot alter it. See How Time Machine works its Magic for an explanation. -
I keep receiving this message.
Time Machine could not complete the backup.
The backup disk image "/Volumes/Time Capsule/Karla Laura Smith's MacBookPro.sparsebundle" could not be accessed (error -1).
Can anyone help me clear this annoying message up? Thanks for advance....The unplugging was of power, if you were unplugging ethernet .. that will not do anything.
The issue is explained here.
C17 http://pondini.org/TM/Troubleshooting.html
If a restart of the TC is not adequate you maybe in the 2% that has other issues.. please try a full network restart in correct order.. with everything off.. modem.. then TC.. then clients.. with 2min gap to allow modem and TC to finish boot process. -
Das Image des Backup-Volumes „/Volumes/meck Time Capsule/Matthiass iMac.sparsebundle“ wird bereits verwendet.
Ich hatte das selbe problem, als ich ein laufendes Backup durch einen ungewollten Neustart unterbrochen hatte. Nachdem ich die Time Capsule über das AirPort Dienstprogramm neugestartet habe (einfach irgendeinen parameter ändern, zurücksetzen und Aktualisieren klicken) funktionierten die Backups wieder.
-
Can I use the wireless backup functionality of a time capsule with a PC?
Can I use the wireless backup functionality of a time capsule with a PC?
Yes, take a look at this link, http://techsupport.foreverwarm.com/time-capsule-windows
-
I am unable to delete a backup file from my Time Capsule. What to do?
Separately I asked for and got help here in relation to what to do with my Time Capsule when I changed computers. I erased the contents of my Time Capsule that had been put there using my old Mac Mini and using Time Machine created a new backup of the same data that are now on my new Mac Mini.
In the process, however, I mistakenly created a backup of a large folder that I do not need. I researched how to delete it using Time Machine and following the simple steps set forth tried a number of times, all without success, to delete the folder on my Time Capsule using Time Machine. I go into Time Machine, I find the folder, I highlight it, I open the little widget and choose 'Delete all backups' of it, I choose 'OK' when asked if I am sure I want to do it . . . each time, though, nothing happens after that. The folder remains there as it was, undeleted.
Can anyone suggest what I might do?
Thank you.Thank you for your further help, Bob.
My Mac Mini is a desktop. I am using Mountain Lion with it, updated to the latest version.
I went back into Time Machine (and now understand what you mean about 'Star Wars' screen), and found the timeline on the extreme right edge of my computer screen, as you explained.
Despite the passage of time, I have only three 'times' expressed on the scale. Two are purple, and represent the two times yesterday that I did backups, the original full backup and one subsequent one (I do not have Time Machine set up, now, to do automatic backups, only manual ones as I direct). One is white and is marked 'Now'.
When I click on the white time, 'Now', for my external HD, I get a long list of items, all but one of which I do not want and tried to delete yesterday. Interestingly, however, when I click on either of the two purple times, for yesterday, the only item that appears is the one that I want to backup. None of the other items is there.
If the purple items are the only ones that represent actual backups, then it would seem that the deletions I did yesterday in fact worked.
If that is the case, again, there remains a bit of a puzzle as to why the 'now' position shows other items too, but if in fact that is just a glitch and does not represent anything actually saved on my Time Capsule, then there is no reason for me to be fussed, only puzzled.
Your thoughts on what I have found and tentatively concluded? -
I have a 2-TB TC that currently backs up 4 Macs, which is full - no more space to backup, down to less than a year's worth of backup for one Mac, so I don't want any more old backups deleted.
I bought a new 3-TB Time Capsule, and wish to move only one of the the 4 backups to it, which is currently over 1 TB. The idea is to free space on the old TC for the other 3 Mac backups. Also the two TCs may end up in 2 different locations soon.
I read about how to do this at Apple and at pondini.
Upshot was that I copied over the one sparsebundle using Finder drag/drop from the old to the new TC.
When I go to Time Machine preferences to Select Disk, then click the new TC, and Use Disk, I get this dialog:
I don't want to Use Both.
I assume that if I click Replace "Data" that the 1+ TB file that took 12 hours to copy will be lost.
How do I get Time Machine to just resume backing up to this sparsebundle, and not create a whole new backup, deleting the file that has the past year of backups?
Tomtomath2o wrote:
I assume that if I click Replace "Data" that the 1+ TB file that took 12 hours to copy will be lost.
I assume you selected the new Time Capsule? If in doubt, and for future clarification, you might want to rename the Data folder on one or both TCs via Airport Utility. Click it on the Disks panel to change the name; then that name will appear on the selection window, etc., so you'll always know which is which:
In any event, the prompt means "Replace (the old) "Data" as the destination for this Mac's backups." It will not touch either the new or old sparsebundle -- future backups will just be directed to the selected location(s). Do note, however, that when you change destinations, the TM Prefs window will show "None" for oldest and latest backups. Don't be alarmed -- that's just TM being lazy and not checking the actual backups yet. See #B3 in Time Machine - Troubleshooting.
See Time Machine - Frequently Asked Question #34 for details on backing-up to multiple destinations.
By the way, just for future reference, another option would have been to connect a USB drive to the existing TC (that's what "S.TM.Backups" is in the sample}.
How do I get Time Machine to just resume backing up to this sparsebundle, and not create a whole new backup, deleting the file that has the past year of backups?
Click Replace "Data".
Message was edited by: Pondini -
How can I import all the backups from an old Time Capsule to a new one?
Hi,
My 2008 Time Capsule just crashed a week ago. Obviously it was out of warranty, and Apple just offered me a new 1TB TC for a reduced priced, and gave me the old internal disk in a plastic bag.
I want to import the information from the old TC to my new TC. Is this possible? How can I do this?
ThanksYour Apple service centre is very good.. they mostly refuse to help in any way.
You need a USB to sata converter cable and power supply or a USB disk holder.. SATA type.. although that is pretty universal now.. they are only a few dollars from most large computer stores or ebay. Plug the usb drive into the computer and copy the contents over to the TC. using ethernet will help btw.. if you only have the air buy a USB to ethernet or Thunderbolt to ethernet (if you have the latest one).. they are available from apple at reasonable prices.
Then you can copy the sparsebundle across..
http://pondini.org/TM/18.html
BUT I have to say I don't recommend it.. I think you are better starting with a new backup and keep the old disk as an archive.. -
How can I backup NAS drive to Time Capsule using Time Machine?
My itunes library is on a USB HD that's connected to my time capsule, essentially turning the drive into a NAS drive. Is there anyway I can include this drive in time machine backups? So basically, time machine would be backing up the hard drive connected to the time capsule... to the time capsule.
Thanks. SteveSorry, but not possible. The Time Capsule can only backup an internal drive on a computer and an external drive that is attached directly to a computer.
Maybe you are looking for
-
Could not find any available Global Catalog in forest when running RemoteMailbox cmdlet
My current Exchange environment is a hybrid configuration of Office 365, Exchange 2013 hybrid, and Exchange 2007 on-premise. I have a script responsible for enabling remote mailboxes and assigning O365 licenses to a list of users; essentially provisi
-
Firefox works fine, but won't respond when I try to shut it down. Using Task Manager to 'End Task' doesn't work. In Task Manager I have to right click on firefox in the Processes menu and click 'End Task'. Apart from logging off/shutting down, this i
-
This is like a hidden deal because I missed the staples 59 dollar deal on MX922 this weeked it was very short I guess anyway if you look at the specs the MX722 is the same as MX922 except for the lcd screen is 2.5 and doesn't come with cd/dvd tray.
-
Hi, I want to do form partial submit without using any command link or button. i want to refresh 1 field. how to do that? I'm using Jdeveloper 10.1.3.1.0 ADF BC. Thanks and Regards, Sudha.
-
How can i change the background color in the heading when i add a new page
How can I change the background in the heading on a new page? When you add WELCOME page the heading color is tan, the ABOUT ME page the heading is light blue, the PHOTOS page the heading block behind the heading text is light green, etc. How do I cha