Backup ALL hard drives, inc. EXTERNAL and FLASHDRIVES?
Hi,
I've read on the forums and got no answer that could help me on this problem. And there have been posts about this earlier but here I go...
*I’m carrying a 250 gb WD Passport disk everyday with all my school work. And I use a Mac Pro to boost my workflow at home. This disk carries a lot of important data for me. I've checked that TM is not ignoring this disk and is supposed to take backup of it but it don't.*
I also got an external hard dive that's always connected to my comp and I’ve read it's possible to make TM backup external drives that's always plugged in but it don't backup this drive either even I’ve checked TM not to ignore it.
Additional info: I'm running TM on 2x WD Drives (500+1000GB) in raid so I got enough space to backup all drives.
Is there a solution that will make TM do the entire backup job or do I need another program for this? In that case, what do you recommend?
Pleased for any reply
- Egon
Message was edited by: Ecker
Message was edited by: Ecker
Okay, thanks anyway. I relay need a solution 4 this problem fast! My external drive has no backup atm and that's really a huge risk for me. I know a lot of people have the same problem, I saw a topic yesterday 2 about this but no solutions. But there have to be some software that's able to backup properly, even if I have to pay.
Similar Messages
-
Backup PB Hard Drive to External Hard Drive
hi. i searched for this answer in the forum but couldn't find it so maybe one of you can help.
i bought an external hard drive to back up powerbook's hardrive to. the plan was to just drag and drop copy it to the hard drive. however, during the process the backup gets cancelled because one or more files are in use.
is there anyway i can do this in one step?
thanks!
mikeSee my FAQ:
http://www.macmaps.com/backup.html
If your external hard drive is big enough, you can just use one button backing up opening the program Superduper and using Smart Update as a preference. Just be sure the Finder Get Info on the hard drive has the Get Info checkbox for ignoring permissions unchecked.
The reason drag and drop won't work is because Mac OS X, like most Unix operating systems runs many programs in the background, and assigns specific privileges to specific programs. It is best to quit any third party software programs you have installed before starting the backup process with Superduper. -
Easiest Way to Backup Main Hard Drive to External USB Hard Drive
I was wondering what the easiest way is to backup my main internal hard drive to an external usb hard drive on a regular basis?
Thanks for the helpCarbon Copy Cloner is NOT "freeware":
http://www.bombich.com/software/ccc.html
The trouble with CCC and a USB drive, is that if you ever have trouble with your iBook's hard drive, you won't be able to boot from a USB drive to copy everything back with Carbon Copy Cloner.
I would recommend booting from the Mac OS X install DVD that came with your computer and opening the Disk Utility from the Utilities menu. There you can make a "restore" from your iBook's hard drive to the USB drive. If necessary, you can do the reverse as well.
-Doug -
Using two hard drives - one external and one internal
As my macbook pro only has 100 gig HD I keep my most recent photos on that HD and edit the photos when I have the time on travel. I then have a 500gig external firewire drive with older photos. My question is two fold
1. Do I have to keep re-setting the preference for the startup library to switch between the two or can I see both at the same time?
2. At this point I can only see one library at the time, how then can I move my current images into the external drive, or asked another way, how can I merge the two libraries?
I receive version 2.0 today, but I can't think I am the only one with this issue, nevertheless, I can't find much about the topic.
Thanks for your helpThe biggest reason I wanted to do it was that for 2007 I took all my photos and put them in a project by month - so I have 12 project folders taking up all this space. Whereas, my older years, going back to 2002, they are in folders for each month in a project for the year. I did this when I bought aperture and moved my files over from Nikon View. All my other years where on my other library and my 2007 was on my library on the computer. So essentially I'd like to collapse the 2007 projects into one main area.
Make sense?
Thanks for al your help. What a great resource. -
Original OSX 10.5.6 and app dvd's (that came w/MBP) lost,and have recv'd replacement dvd from Apple. Once hard drive is erased and new OS w/dvd instl'd, how do I insure all applications bundle - that came with MBP - will reinstall?
Your profile says you have 10.6, so why bother with the original 10.5 OS?
But to your question, before you erase anything, make a backup of your data for safe keeping and restoration. Having an external hard drive for this purpose is most useful. -
External hard drive gone wrong and copied everything to Imac HDD filling it completely
I have had my iMac backed up to an external hard drive for years and randomly the External hard drive is now not readable and it has seemed to copy everything to my imac hard drive filling it completely.
any ideas how to firstly fix the external drive without losing everything on there and second why it would have copied everything to the Imac?
I cant even do a restore from a back up as its all backed up to external drive and its saying its not readable.If they're still in two folders (iTunes app and Music) on your external, can you not just copy those two back to the internal drive and expect it to work properly again? It's my understanding that music you wish to be active in iTunes must be on your internal drive.
-
I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?
Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd) -
Can I use an external hard drive to download and store my iTunes library?
Can I use an external hard drive to download and store my iTunes library?
Yes - in most cases you can just copy your entire library (by default C:\Users\username\Music\iTunes) to your external drive, with the result being a iTunes folder in the root of that drive with a structure like this:
Then hold down SHIFT when you start iTunes, and when you see this prompt:
click on Choose Library..., navigate to the iTunes folder on your external drive, and click Open. See turingtest2's user tip on Make a split library portable for more information, including steps you may need to take to align your library structure before moving it to an external drive - this applies if you currently have some/all of the media in your library stored outside the standard iTunes Media folders. -
My laptop and external hard drive both failed and got corrupter.
My laptop and external hard drive both failed and got corrupter. I've lost my quick time pro 7 and all my music, I still have my Ipod with the music on, How can I get it back on to Itunes and quick time pro back on to my PC? Many thanks.
Since your current editing workflow is based around Virtual Copies there are no actual files containing the edit data. Therefore, you'll need to use the 'Import from another catalog' option ( see File menu).
-
When I use Preview,Photo Mechanic and Pages, all JPEG or RAW images appear corrupted.
I thought my hard drive was failing and replaced it and migrated everything over but the problem still exists.
It felt as if maybe a virus was at work but I ran Sophos and found nothing.
I store images on my Drobo Raid system but when I work from my Macbook Pro I have no issues, just on the tower.
Any idea what is going on?First of all, why did you say yes to Nero Back up before researching what it does with files already on the HDD? When I install Nero, the Back Up is the first thing I disable, it is a nagging pain, there are much better backup programs available. There are several file recovery programs out there to recover deleted files, that is, if that is what happened. Also, if you haven't overwritten the files, so you should be able to find them.
-
My old hard-drive has corrupted and i have lost my library. i lost my back up too. I have restored all my purchased stuff but had 5000 songs uploaded from my CD collection. Is there anyway of transferring the CD tracks from my ipod or ipod to my iMac? Or do I have to manually upload the CDs again?
Hi,
See if this doc helps https://discussions.apple.com/docs/DOC-3991
Jim -
I just got my MacBook Pro a month ago. However I am realizing I need more hard drive space due to aps and programs. I use am external but am concerned about the space. Is there a way to upgrade my hard drive from apple and keep my warranty valid?
That would depend on whether your model actually has a hard drive. If you have the new 2013 Retina model, then you have a fixed storage device built-in that cannot be modified after purchase.
-
Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this an issue?
Other than put disc in you don't give much info about what you've done. With the install disc inserted restart your Mac while holding the C key, that should start it up from the install disc. Should also work fine with a wireless Apple keyboard.
-
Mac Pro 3,1 - did my hard drive die? And what should I replace it with?
Hi,
I inherited my late husband's 2008 Mac Pro (3,1 model) which had 2 x 500GB hard drives in it and 6GB of RAM. I filled the remaining hard drive bays with 1TB drives (I take a lot of video so needed the extra space). The boot drive was partitioned 50/50 in Boot Camp. I've upgraded the RAM to 10GB and I am currently running Lion.
Today, while doing something as innocuous as scrolling down a web page, the bottom half of my screen went black and the top half began flashing wildly. When it stopped after several seconds, the mouse would not respond and I could not click on anything. If flashed a bit more, and then I had mouse control back but could not click on anything - web links, applications, finder. After waiting patiently but getting nowhere, I powered the machine down manually, and when I re-started it, it failed to boot. The chime sounded, the apple appeared, and the little revolving wheel, but at the point where the screen would normally go blue then display the desktop, it just went white. The fans spin, but otherwise it's very silent.
I tested with a second display, got the same issue. I tried booting to recovery mode but it went back to the white screen. I could start in target mode, and there were no issues with flickering screen, so I don't think it's the graphics card. Then I tried browsing to the hard drive over the network, but it wasn't showing on the PC network page, nor could I connect to it via the home theater system, which I can normally do as the streaming app launches on start-up. I am assuming this means the drive has failed? It's the original, and we bought the machine when they were new to the market, so is a good 5 years old. It contains not only the boot drive but my documents, photos, websites, selected videos, all of which are backed up on the Time Capsule, and I was in the process of uploading to cloud backup as well (although not very far along, due to data cap and slow international upload speeds). I had no warning it was about to do this, but then I guess sometimes you don't!
Assuming I need to replace the drive, would it be worth replacing it with an OWC Mercury Electra 480GB SSD in an Icy Dock sled? Or would that be overkill for such an old machine? Would getting a standard 7200 WD Caviar HDD or similar give me enough of a speed boost? Obviously I am rather enamoured with the idea of a blazing fast SSD but I'd have to import it (not available locally) so I don't want to shell out all that money unless it's really going to make a massive difference.
Is there anything else I would need to know about using an SSD over a HDD? I assume I would fire it up the normal way - install it, boot from my Snow Leopard install disc (I downloaded Lion from the App Store) format it, clean install SL, then re-update to Lion, then restore my Time Machine backup? Am I likely to experience any weird issues due to it being an SSD? I see talk online of firmware problems and something called TRIM that I don't know anything about. If it's most likely that I can install it and rock on as normal, then I'm pretty keen, but if there's a reasonable probability of it being temperamental, I probably wouldn't be willing to deal with that (and therefore go the HDD route instead). Therefore I am very keen to hear people's opinions and experiences.
Sorry for the terribly long ramble. The more I have researched this, the more questions it raises! All advice gratefully accepted. Thanks!more than likely it is your video card. If it is ATI 2600XT, tell it bye-bye. The card is barely used at all in TDM or Safe Boot Mode. The 2600 and Lion and the issues with that card, even if it seems okay, is not.
Depending on Windows OS as to how it mounts and sees your Lion HFSX (there is a nice HFSX driver from Paragon, and an NTFS driver for Lion too)
480GB SSD is overkill for any system unless you are pushing CS6 2-3GB images and then for scratch. All you need for a boot drive is about 100GB.
If you have an SSD now, then 1) you need to do a full image backup and restore (regularly as maintenance), and 2) TRIM Enabler
Save Lion and you can always do a clean Lion install w/o going back to SL - but you might want to keep SL (dual boot) and handy if you run into anything you still need that required PowerPC/Rosetta
FBDIMM RAM dies, Amazon has $32 kits of 4GB. And having all 8 DIMM slots filled improves things. If you need or want to and feel 16GB isn't overkill.
SSD and issues are always possible. you should not just go along. not without a clone image. And you should have another drive w/ TRIM Enabler so that you can do a repair and "trim" what is needed.
Clone a system with CCC regularly. Bootable. And can also be used by Setup Assistant.
Install Lion over a heavily used SL system and there are likely remnants of old things that get in the way and left in there and not removed. -
I recently updated my computer to mountain lion and after doing so my computer would no longer boot up. I took it to the apple store and they told me that the hard drive was damaged and needed to be replaced. They were booting my computer with an external drive and in doing so could access my computers HDD. Upon starting to drag and drop files to a new hard drive I started to get a lot of -36 errors. I proceeded to go go,e and create my own bootable thumb drive and try doing the same process with more time to look through it. I have up till now been able to copy most of my files but have run into a problem with iPhoto.
I have been searching around for a while now and have yet to find a method that helps me in my particular situation so I am now asking for help myself. I will explain what my current system of file recovery is and see if anyone can help me out.
I have since then replaced the HDD in my computer and purchased a SATA external HDD enclosure for the original drive. This allows me to still access all files and folders from the original drive. I have managed to recover a majority of the files but have recently run into a problem with the iPhoto library. Every time I try to drag and drop the iPhoto library to my new HDD it fails after "transferring" 2.02GB and tells me it has encountered a -36 error because some files cannot be read or written. I believe I am using iPhoto '09, I will check and confirm that later.
I am looking for a way to open iPhoto's library and access the image files it seems to be hiding from me. Please understand that I cannot open the iPhoto library either, I have lost access to the library entirely and want to see if there are any image files that I can save. I dont have the computer backed up recently and want to save my photos. Thanks for looking and I'm hoping someone can help.Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command). Rebuild it to the Pictures Folder. This might overcome the -36 issue.
(This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.)
Failing that you're into recovering your Originals from the damaged Library and creating a new Library and starting over from scratch.
Regards
TD
Maybe you are looking for
-
When testing the microphone with Skype, the pla back sounds garbled.
Problem with microphone testing Skype. When testing the sound and play back it sounds garbled.
-
Flash Movie to Play Sitewide w/o Re-Starting...
Hi, Is it possible to have a Flash movie play sitewide without re-starting on each page and without using frames? How? Thanks!
-
Display of Clob field in webi/deski..
Hi, We are storing the rich text content in clob field (Oracle) & Text field (SQL). We were able to display the rich text in crystal by selecting Rich text property of the object. But I couldn't find any such property in Webi/Deski to display the ric
-
HT4623 resetting iphone 4 with black screen
black screen other than when i turn it off i can see an apple what can be wrong( yes it is fully charged)! people say to reset it thru itunes but how can i if i cant see whats on my screen
-
K8N Paltinum SLI no surround sound SPDIF not working
I have a K8N Paltinum SLI. The one with the onboard Soundblaster live! 24 bit. I have this connected througt SPDIF and analog, but only my front speakers work. I use the Cambridge Soundworks DDT 2500 which is an active decoder. (also from creative)