Backup.app problems when trying to restore from a MYBOOK drive FAT32

I recently purchased a MYBOOK external drive and used backup.app in (Max OS X Vers 10.4) to backup my iphoto files. When I went to restore the files, the restore failed.
I was unaware (when I used backup.app with the MYBOOK destination) that I probably should have reformatted the drive in MAC extended (journal) instead of leaving it in FAT32. I think this is likely the problem.
I have also recently upgraded to Leopard, which seems to be working fine.
Does anyone know how I can retrieve my photos that are sitting out in the external drive (about 30GB of data.....)

If all else fails, you could go to the backup folder itself, right click on it, and fish around to find your JPEG files. Inelegant but you'll be able to get them... the fact that's a FAT32 file won't affect the JPEG files themselves (they don't have resource forks).
Once you have all your data off there I'd definitely suggest you reformat it as HFS+ (Journaled). In fact, to use Time Machine, you must reformat the drive.

Similar Messages

HP Mini 110-3520ca constantly restarts when trying to restore from usb flash drive

Hi,
I have a HP Mini 110-3520ca that I upgraded to Windows 8, but was having issues with freeze ups and shut downs so I decided to go back to Windows 7 Starter. When I tried to restore to factory default the files were corrupted and I couldn't restore from the recovery hard drive or my external back up files. I ordered the recovery USB flash drive from HP and tried to restore from it. It completes the Recovery Preparation and the Software Installation finishes, Windows starts to load, but Ithen it goes back to welcome to Recovery Manager. When I try to start Windows without the flash drive I get an error log that is below. Can someone tell me how to fix this or what needs to be done to get my Windows working again, any help would be greatly appreciated.
Carol.
Error Log:
Component: TDC Preinstall Diagnostic Tools for Windows 7 - TDC
Timing: Factory Update
This is not a Regional SKU
This is not an RCTO P2PP SKU
Error: Different LOC# detected:
Error: SKU number LOC# = 00
Error: REGSKU/OptionDashCode.ini value for ABC = 12
Error: SKU number incorrect for this LOC#=ABC.
Next Step: Please dash sku number with xxxxxx-12x
Next Step: Or use EEPROM and change LOC# in either SKU Number or CTO Localization Code
[17:16:38.37] ------------------------------------------------------------------------------------------
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[17:16:38.38] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[17:16:38.38] ------------------------------------------------------------------------------------------
[17:13:54.75] Start BBOffline.cmd...
UPDrv=[C:]
[17:13:54.77] Set UIA Error Code to 951
[17:13:55.39] WinPE is 32bit.
[17:13:55.39] Starts [FixUps].
[17:13:55.41] ---------------------------------------------------------------------
[17:13:55.41] FixUps.cmd...
[17:13:55.41] create overall progress info...
[17:14:15.89] FixUps.cmd completed...
[17:14:15.89] ---------------------------------------------------------------------
[17:14:15.91] Starts [Tweaks for SSRD].
[17:14:15.92] ---------------------------------------------------------------------
[17:14:15.92] SSRD Tweaks to change user default locale...
[17:14:15.92] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
[17:14:16.09] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US -image:C:".
[17:14:23.50] ---------------------------------------------------------------------
[17:14:23.50] Launch PININST.exe for Offline ...
[17:14:33.78] Starts [Sleep 10 sec].
[17:14:43.86] Starts [Create RStoneFUpdate.INI].
[17:15:20.91] Starts [create 1GB Pagefile for offline].
Volume in drive C has no label.
Volume Serial Number is 868D-C760
Directory of C:\system.sav\bbv
10/27/2014 05:15 PM 1,073,741,824 pagefile.sys
1 File(s) 1,073,741,824 bytes
0 Dir(s) 38,502,694,912 bytes free
[17:15:21.04] move boot.wim from FactoryUpdate to 2ndCap.
[17:15:21.10] Brand detection.
[17:15:21.80] ---------------------------------------------------------------------
[17:16:10.26] Start SysID Check...
[17:16:13.30] Start Option Code Checks...
SKU_DEF_COUNTRY=[39]
SKU_DEF_SYS_LOC=[fr-CA]
Reset country in administrator...
Reset country in Default user...
Reset System localed
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7600.16385
Reporting offline international settings.
Default system UI language : en-US
System locale : fr-CA
Default time zone : Pacific Standard Time
User locale for default user : en-US
Location : Canada (GEOID = 39)
Active keyboard(s) : 0409:00000409
Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)
Installed language(s): en-US
Type : Fully localized language.
The operation completed successfully.
Updated System Locale info..
[17:16:27.37] Start PIN Tweaks...
[17:16:28.38] ---------------------------------------------------------------------
[17:16:28.40] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
[17:16:28.40] ----------------------------------------
[17:16:28.40] Tweaks for OOBE's Unattend.xml
[17:16:28.40] to pick up the proper file...
[17:16:28.41] ----------------------------------------
[17:16:28.41] rename unattend.org to unattend.or_
[17:16:28.44] ----------------------------------------
[17:16:28.44] without Light Sensor..
[17:16:28.48] ----------------------------------------
[17:16:28.49] This is Restored image by SSRD [SSRD.flg]...
[17:16:28.51] ---------------------------------------------------------------------
[17:16:29.40] Start MIR Tweaks...
[17:16:30.43] ---------------------------------------------------------------------
[17:16:30.43] [MIR Tweaks] ...
[17:16:30.43] ---------------------------------------------------------------------
[17:16:31.44] Start Factory Update(s)...
[17:16:33.45] Start QFE Offline installation...
[17:16:38.13] PININST_OFF: PASSED...
[17:16:38.21] Type C:\System.sav\Logs\BBFindEr.log...
[17:16:38.23] Type C:\System.sav\Logs\BBFindE0.log...
---------- C:\SYSTEM.SAV\LOGS\PININST_OFF.LOG
Result=PASSED
[17:16:38.24] There was no QFE installation...
[17:16:38.24] Check FUList.log if there is duplicate Desc...
Couldn't access C:\System.sav\logs\FUList.log...
[17:16:38.35] No Duplicated Desc is found... PASSED.
[17:16:38.37] There was no Factory Update...

Hi @Savvy58
I did some further looking into that Error Log you posted. Basically, it means that is looking for a certain location that doesn't seem to be there. This could be a problem with the USB Recovery drive that you have. I would recommend that you contact HP. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

HT201412 My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

HT4061 I have an iphone 5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?

I have an iphone 5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas? Does a totally dead battery have that effect? I have had it plugged in to a computer overnight, but maybe does not charge when totally dead?
Please help, thanks in advance all1

Hi eggroll77,
Welcome to Apple Support Communities.
That alert codes does suggest there is a USB related issue. If you haven’t already, try the troubleshooting suggestions in the article linked below.
iOS: Restore errors 4005, 4013, and 4014
I hope this helps.
-Jason

Error When Trying to Restore from iTunes Backup

I had to erase and re-install the operating system. I thought I had iTunes covered by burning an iTunes backup to a CD, but when trying to restore iTunes from the CD it will restore a few songs and then give an error message that it was unable to read or write to my hard drive. I looks as though it restored the music that I owned and put on the computer but not the tunes I had purchased from the iTunes store and not the playlists. I did not know enough to burn the /music file. Is there anything I can do to get the burned CD to restore?

Contacts are not part of the backup. They are seperate and either you need to sync them with an email program such as outlook or use icloud mail,contacts, and calendars on the phone. Unless you did that then the contacts are gone.

Problems when trying to migrate from 6.0 to 6i

Hi,
I'm having problems when trying to migrate a Designer 6.0 application to 6i.
When I get to start the migration after having selected the source application, the process fails immediately after I've pressed the button.
I'm getting the error: CDR-21244: This process has been aborted and the advice to check the log file. But no log file is created.
I've read Note 234984.1 which gives two suggestions in this situation: That the ORACLE_HOME environment variable is unset, and that the LOG_DIRECTORY_RAU directory is writeable. Both is fulfilled in my situation. However it seems that the migration procedure tries to start imp - I've noticed a short flash with the command prompt screen - and when I try to start imp manually from the command prompt I get errors. I was able to fix this error by setting ORACLE_HOME and ORA_NLS33. But the defining ORACLE_HOME is "illegal" ref. Note 234984.1. Of course I tried to leave it anyway, but that didn't help neither: The migration still dies a quick and silent dead.
So now I'm stucked. How can I carry on?
The source is on version 6.0.3.5.0 running on 8.1.5, and the taget is version 6.5.92.1.9 running on 8.1.7.4.
Regards, Michael

The migration from Designer 6.0 to 6i requires careful planning. Please read the migration guide on OTN (http://www.oracle.com/technology/products/designer/index.html) for advice and to assist you with the migration.
Regards
Sue

Old Apple ID email/password when trying to restore from iCloud backup

I've seen variations of this question being asked previously, but I haven't seen any real solutions provided (or any that have worked).
About a year or so ago, I changed the primary email on my Apple ID from an old email address I rarely-to-never use anymore. Ever since then, when I try to upgrade a device or restore from back-up, I get asked to enter the password from my old email address. Since I this is no longer the address I use, even if I enter the password for my current Apple ID, it says it's incorrect and won't let me proceed any further. I have tried re-adding this email to my Apple ID account (doesn't work), I've tried making that email my primary Apple ID again (doesn't work and causes the same issue to occur with restoring apps I've downloaded since changing the Apple ID email), and I've tried just skipping that step in the restore process, but then it doesn't restore all of my apps.
Seems odd to me that my Apple account doesn't use some sort of unique identifier for the Apple ID accounts as a whole instead of trying to recognize purchases based on whatever email someone was using at the time.
Anyway, if anyone knows of a way to fix this, I would be forever grateful! I just got a new device today and would love to restore from backup smoothly without losing any of my data that might be in the apps attached to that old Apple ID email.
Thanks!

All you need to do is restore the iphone in itunes as new
and then set up as new
after this is done
then you can restore from itunes back up with out any error!!
-Johnny

ITunes stops responding when trying to restore from backup

I tried to restore my iPhone 5 from encrypted backup, but everytime I launch iTunes get the stops responding message and shuts down. I managed to backup from iCloud, but it is painfully slow. Does anyone konw what could be going on here? I never had this problem whit my iPhone 4, both on iOS 6. I am running Windows 7 with latest iTunes.

It happens with my iPhone 4S and iPad 2 as well without encrypted backups. Anyone see this behavior or know how to fix? I removed all Apple software and reinstalled and the backup worked once, now back to the "iTunes has stopped working" error.

Error when trying to restore from backup

I just received an iPod replacement and when I go to restore from backup it gives me an error. The photos are restored but no music or video. Any suggestions? Thanks

lllaass wrote:
If they are not in the iTunes library they can be synced to the iPod.
They CANNOT be synced to the iPod.
B-rock

Macbook stuck on startup when trying to restore from time machine

Recently, my MacBook Pro (running 10.6.3) crashed and when I tried to restart, it got stuck on the grey startup screen with the Apple logo with the spinning gear beneath it. I tried several times to start my Mac up, but each time it got stuck on that screen. I left it for an hour and came back with the same screen still up.
I then booted up off the install disc and used the disc utility to check my HDD status. It reported a fatal error in my HDD so I bought a new hard drive. After installing the new hard drive in my macbook, I once again booted up from the install disc and told it to restore my hard drive using my last time machine backup (which was created one day before the initial crash). Once again, the computer got stuck on the grey startup screen mentioned above.
I force-shutdown and started up again off the install disc. This time, I installed Snow Leopard fresh without any restoration from a previous backup and my computer started up just fine. Since then, I have tried numerous times to restore my machine from several time machine backups made in the last few weeks and each time, it stalls when I try to boot up. But each time I install Snow Leopard by itself, everything works normally.
What's going on in the time machine backup that is causing all of this? Is there some kind of startup routine that just gets stuck in a loop that I can delete from my time machine backup files? Please help!

Sly Park Mark wrote:
After installing the new hard drive in my macbook, I once again booted up from the install disc and told it to restore my hard drive using my last time machine backup (which was created one day before the initial crash). Once again, the computer got stuck on the grey startup screen mentioned above.
Two possible causes:
You used a Leopard install disk, instead of a +Snow Leopard+ one. All you needed to do was install Snow Leopard over it; but since you've now done other things, your best bet is to just do it over, using a Snow Leopard disc.
Whatever was going wrong with your internal HD damaged some things on your system, and that damage was backed-up, so is restored along with everything else. In that case, do it over, but select an earlier backup.

When trying to restore from time machine system won't find my hardrive

Last night I open up my MacBook Pro and it was non-responsive. It had been working fine earlier that evening. I hadn't dropped it or jarred it (that I remember). However, when I tried to open up Safari, everything froze. All I got was the spinning beach ball. Eventually I did a hard reboot, and when my computer came back up, it went directly to a directory with disk recovery, restore from back up, reinstall Maverick, and ask questions.
I tried to repair with the disk utility, but there was an error whenever I did.
I next tried to recover with my time machine back up. However, when I attempt this time machine cannot find a disk to install to.
Is my hard drive dead? Is there a fix that I'm not seeing?
Thanks.

Try a manual restore to a different Mac.. the new hard disk means the Mac is now seen as a new machine.
See Q14-17 here. http://pondini.org/TM/FAQ.html
Particularly 17..
I think you might have had the rental using TM to backup to the old backup which may have got things really confused.

Installation problems when trying to update from 7.7.4 to release 7.7.5.

I had installation problems trying to go from Qtime level 7.7.4 to new version 7.7.5 I get an error message after the download and on the reinstall. It basically tells me to download and install manually. Tried this (even running as administrator and get another error message basically telling me the same thing to download and install manually. Anyone have the same thing happen and if so how did you get it fixed?

I'm having a similar problem. I get a message stating that "The feature you are trying to use is on a network resource that is unavailable". It allows me to enter an alternate path a folder containing the installation package (Quick Time.msi). No matter which msi I point it to, I get the same message. I have to cancel out of the installation. I'm trying to get current so I can purchase Quick Time Pro. Anyone know what "feature" it's looking for?

Ipod sync freezes when trying to sync from an external drive

I just bought a Seagate FreeAgent external hard drive (model # ST305004DA1E1-RK)because I was running out of space on my desktop. I have itunes set up on my desktop hard drive and my library set up on my external and the itunes works fine when listening and/or orgainizing my music, but when I plug in my ipod while the external is pluggged in I get a 'USB Device Not Recognized' warning. But if I unplug the external and re-plug in the ipod, itunes will recognize it. But if I re-plug in the hard drive and try to sync the ipod, it freezes up. I have tried to run the itunes software directly from the external drive, but I get the same 'USB Device Not Recognized' warning when I plug in the ipod while the external is still plugged in. Any thoughts?

As a test, try removing all USB devices except a standard keyboard and mouse, including any USB hub. Connect the hard drive and iPod directly to the computer. See if that works.
If it works, try to figure out which USB device makes it NOT work, treating any USB hub as a device.
If it still does not work, try using the Restore button in iTunes to see of that helps. This will erase the iPod and restore it to original settings.

'Audio to Video' problem when trying to import from non-controllable device

Hello,
I am trying to import media from a VHS into FCP, using a 'Dazzle', (DAC from Data Video). In my Capture Settings, under Device Control, I selected 'Non-controllable device', and under the Capture/Input setting, I chose the default, 'DV STSC 48 khz', then did 'Capture Now'. It seemed to work fine, until about half-way through the project, I noticed that the sound did not match up to the people speaking/singing on the video. Should I change the Capture/Input setting to something else? Or, is there another setting I need to make, so that audio/video will match up? Also, should I maybe try a Batch Capture, instead of Capture Now? I just thought of that when writing this - any help would be most appreciated, thank you!
Kristina

Ooooo.... Hate to say... Dazzle just has bad memories for me. Hollywood Bridge... made by Dazzle...
Nothing but problems. Not sure if yours is the same.
Anyway to use your camera as a passthru for the VCR instead?
Still -- no guarantees sync will line up. For that you need to capture in 15 minute or less segments. Hard to do with VHS that will run for 2 hours... but it's your best bet. Join them up in post if you have to.
CaptM

Iphone 4 is stuck in recovery mode and gives error code 2001 when trying to restore from itunes...any help?

Just downloaded the new software from itunes today for my iphone 4. While talking on the phone while plugged into macbook (charging) my call was dropped and then my phone turned off. Itunes now says it found my phone and it was in recovery mode and I need to restore it. When I try to do that I get an error code of (2001) and I am unable to go any further. any help from anyone please? Thanks. Ben

Thats okay
Are you using a Mac or PC? The step about ports, it not really relative to your issue (error 2001)
Apple wrote (in TS1275)
(2001, 2002, 2005, 2006, 2009, and so on) If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. Learn how to reset the SMC. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue continues, it may be related to conflicting security software.
So I would try an SMC reset if you are on a Mac. But mainly, try a different USB cable if you have one.

Backup.app problems when trying to restore from a MYBOOK drive FAT32

Similar Messages

Maybe you are looking for