"Backup Assistanmt has encountered a security error. Please check application's permission's" Why am I getting this error?

And my phone lose's all other functions (i.e. set alarm) when this error come up. it's like its disconnected...how can I fix?
Solved!
Go to Solution.

This normally has to do with the policy settings on your desktop computer. If you are using a corporate computer you will need the power user or administration rights for what you want to do.
If you are on your home computer, fix your settings so that you are the administrator on your computer.
What I am describing, is a common reason where I found the computer will not back up files from the phone to the hard drive.
Jerry G.
Jerry G.

Similar Messages

I have updated my 4S i phone with ios 8.1.2, while activating i forgot my password, i am able to sign in my apple id in pc but not not able to sign in my i phone and message- your apple id has been disable for security reasons please help

I have updated my 4S i phone with ios 8.1.2, while activating my iphone, i forgot my password. I am able to sign in my apple id in pc (manage my account) but not not able to sign in my i phone and message- your apple id has been disable for security reasons please help.
my apple id is with extension @ gmail.com but for activation it is mentioned that it is linked with extension of @me.com

Hi ulhas1frombanihal,
Welcome to the Support Communities! Because your account has been disabled, you will need to contact Apple ID account security to straighten this out.
Contact Apple for help with Apple ID account security - Apple Support
http://support.apple.com/en-us/HT5699
I hope this information helps ....
- Judy

Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue. I have reinstalled the program to no avail.

Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue. I have tried reinstalling the program but it made no difference to the error message.
Could someone help please? Steph

Hi,
Please give a try to Photoshop Elements (PSE) knowledge base. steps mentioned on this and see if it works.
Regards
Kishan

According to my network provider (Amaysim/Optus) Tethering is enabled, so why do I get this error message "to enable personal hotspot on this account, contact OPTUS"

According to my network provider (Amaysim/Optus) Tethering is enabled, so why do I get this error message "to enable personal hotspot on this account, contact OPTUS"
Amysim/Optus support can not help.
I can not check or change any network settings (no APN settings)
I have synced phone using latest itunes (10.5.3).
Phone software is up to date (5.0.1).
Network settings have been reset.
SIM card has been taken out and put back in.
Phone has been switched off/on again.
Another sim card from virgin works ok (hotspot option is visible and can be turned on/off as required)
The Amaysim/Optus SIM card can be put into another phone (android) and tethering/hotspot works fine.
Can anyone provide solution to this nightmare?

I am having the same issue although i have an iphone 5. I have contacted Live connected numerous times an tried everything imaginable to solve the issue. Is it possibly a handset issue? I cant recieve any help from optus as im with live connected, they cant help me and apple keep telling me to contact your carrier ( live connected). Seems to make me want to switch providers pretty shortly..
please let me know if you can solve your issue and maybe it can help me too..

There was an error opening the database for the library "/Users/stacia134/Pictures/Aperture Library.aplibrary". Why am I getting this message and how do I correct it so that I can open Aperture???? any suggestions would be most appreciated

There was an error opening the database for the library “/Users/stacia134/Pictures/Aperture Library.aplibrary”. Why am I getting this message and how do I correct it so that I can open Aperture???? any suggestions would be most appreciated

Then I'd check the system drive, if it has problems.
To check your System drive boot into the Recovery Partition, see: OS X Lion: About Lion Recovery
Restart your Mac and hold down the Command key and the R key (Command-R), and keep holding them until the Apple icon appears, indicating that your Mac is starting up.
You will see a panel, where you can use Disk Utility to check your System Drive.

Why am I getting this error message......."Adobe Reader could not open 'SBA 413.pdf' because it is e

why am I getting this error message when I try to open a PDF file? Adobe Reader could not open 'SBA 413.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

It's difficult for anyone to say how to fix it. Try getting a new copy of it. Did you download it from a web site, as an email attachment, or something else?
I donwloaded that form from the SBA web site and it worked fine for me. It is an XFA form created in LiveCycle Designer, but those should work fine with the desktop versions of Adobe Reader. So try downloading it: http://www.sba.gov/sites/default/files/SBA%20413_0.pdf

HT1414 Why do I get 'This message has no content' with some e-mails on my iPad when the same messages can be received on my MacBook Pro without any problem, and how can I fix it?

Why do I get - 'This message has no content' - with some e-mails on my iPad when the same messages can be received on my Mac Book Pro without any problem and how can I fix it?

Is this a POP (POP3) email account? If so, you MacBook Pro may be retrieving the email and deleting it off the server before your phone can. Another possibility is that both your Mac and your phone are trying to retrieving it at the same time, and the POP server, which will only allow a single email client connection at a time, is locking out your phone resulting in the "has not been downloaded from the server" error.

Why do I get this error when I want to run a test using Ant?

Why do I get this error when I run the Ant build file?
Testsuite: JUnit
Tests run: 1, Failures: 0, Errors: 1, Time elapsed: 0 sec
Caused an ERROR
JUnit
java.lang.ClassNotFoundException: JUnit
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:316)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:280)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:374)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423)
at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137)

Abder-Rahman wrote:
In the "XML" file, I was giving the name of the test as JUnit ---> <test name="JUnit">Well, do you have a class called just "JUnit" that contains a test?

I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?

I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?

In relation to my previous inquiry regarding inability to view a pdf file using Safari...
Is it possible that I can view other online bills from other website but not this particular bill from one specific website?
Sorry if I missed any important point in this article -->Apple Safari 5.1 and Adobe Reader/Acrobat Advisory
Thanks again!

Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.

I received an error "iTunes requires 64-bit mode" says to go into my iTunes application and 'uncheck' the 'open in 32-bit mode' checkbox - i went into the application and the box was not checked anyway so why am i getting this prompt? Never happened b4

i received an error message "iTunes requires 64-bit mode" says to go into my iTunes application and 'uncheck' the 'open in 32-bit mode' checkbox - i went into the application and the box was not checked anyway so why am i getting this prompt? Never happened before. yesterday did the sofware update for maverick.

Thank you for your response, Chris. But I'm afraid I have to disagree. There are native 64 bit versions of iTunes available for OSX and Windows.
In a 64 Bit Windows environment native 64 Bit Applications install the DLL's in a directory called "Program Files" and a directory called "Program Files (x86)" (32 Bit applications only use the ladder).
iTunes 9 is consistent with this behavior - and it identified itself to the system as a 64 bit application (meaning it's process appears without a "*32" tag on it).

More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library.

I am able to pick 4 videos from the Photo library in my iPhoneAPP but when i try to pick 5th one it throws an error:
"More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library."

Hello Tate r Bulic
I don't have any idea how to remove this error,can i pick more than 5 videos from the photo library...
If it's then please help me and gimme idea..Thanks

Why am I getting this error?

Hello,
I am trying to call my Java class from a JSP page. I am getting this error:
Generated servlet error:
C:\Program Files\Apache Tomcat 4.0\work\Standalone\localhost\em\jsp\Test_0005fSummarySBU_0005fscreen$jsp.java:82: Wrong number of arguments in constructor.
strQuery=new ListReturn(strEssUser, strProcessingMonth, strProcessingYear);
I don't understand why I am getting this error as I pass three paramters to the Java class, and I accept three parameters in the constructor.
JSP:

<META Http-Equiv="Expires" Content="0">
<META Http-Equiv="Pragma" Content="no-cache">
<HTML>

<%@ page import="com.home.tool.reporting.*" %>
<%@ page errorPage="run_error.jsp" %>
<%@ page import="java.util.List,
                 java.util.Collection,
            java.net.URLDecoder" %>
<HEAD>
<META NAME="GENERATOR" Content="Microsoft Visual Studio 6.0">
<TITLE>Economic Model - Summary SBU Report</TITLE>

<BODY bgcolor=#ffffff>
<%
                Collection strQuery = null;
                String strEssUser = "test";
                String strProcessingMonth = "JUL";
                String strProcessingYear = "2002";
                strQuery=new ListReturn(strEssUser, strProcessingMonth, strProcessingYear);
                System.out.println(strQuery);
%>
</BODY>
</HTML>Java class:
package com.home.tool.reporting;
import java.net.URL;
import java.sql.*;
import java.io.*;
import java.util.*;
public class ListReturn extends ReportQueryBuilder
        public void ListReturn()
        public Collection ListReturn(String userID, String pMonth, String pYear)
            throws ReportQueryBuilderException
            //declare Collection store Value-Object pairs
            Collection c = new ArrayList();
            //declare and initialize variables
            CallableStatement cs = null;
            ResultSet rs = null;
            // declare call for stored procedure to pass in three parameters
            String pass = "{Call dbo.p_rep_srSbuList(?, ?, ?)}";
            try
                //open CallableStatement using JDBC connection to SQL database
                cs = con.prepareCall(pass);
                //set IN parameters
                cs.setString(1, userID);
                cs.setString(2, pMonth);
                cs.setString(3, pYear);
                //execute call and return result set
                rs = cs.executeQuery();
                //loop through result set storing each record as a Value-Object pair
                while(rs.next())
                    c.add(new ListBoxValueObjects(rs.getString(1), rs.getString(2)));
            catch (SQLException sqle)
          throw new ReportQueryBuilderException(replaceToken("Problems executing query: "+sqle.getMessage(), "'", "\\'"));
            finally
                try
                    //close the Result Set and CallableStatement
                    rs.close();
                    cs.close();
                catch(Exception e)
                    System.out.print("\nFATAL   : " + e);
                    System.out.print("\nFATAL   : " + e);
            return c;
}Does anyone see whay I am getting this error??
I can't figure out the problem!

change this:
<%
     Collection strQuery = null;
     String strEssUser = "test";
     String strProcessingMonth = "JUL";
     String strProcessingYear = "2002";
     strQuery=new ListReturn(strEssUser, strProcessingMonth, strProcessingYear);
     System.out.println(strQuery);
%>To this:
<%
     Collection strQuery=null;
     String strEssUser="test";
     String strProcessingMonth="JUL";
     String strProcessingYear="2002";
     lr=new ListReturn(strEssUser, strProcessingMonth, strProcessingYear);
     System.out.println(lr.getQuery())
%>Then make a new public method in your Java called getQuery()
public Collection getQuery();Do what you need to do to process it and return the value in getQuery. You will also probably need to make private variables in you declaration to do the processing on.

Why am i getting this error? they are not the same?

1021: Duplicate function definition.
1021: Duplicate function definition.
stop();
import flash.events.MouseEvent;
// home button definition \\
// Portfolio button definition \\
Portfolio_btn.addEventListener(MouseEvent.CLICK, pClick);
function pClick(event:MouseEvent):void{
    gotoAndStop("getPortfolio");
// Contact Me button defintion \\
Contact_btn.addEventListener(MouseEvent.CLICK, cClick);
function cClick(event:MouseEvent):void{
    gotoAndPlay("contactme");
why am i getting this error the functions have different names... idk what to do they are for two different buttons I am using action script 3.0

i did what u said and it said these two lines were the same
// Portfolio button definition \\
Portfolio_btn.addEventListener(MouseEvent.CLICK, pClick);
function pClick(event:MouseEvent):void{                                                         <--------this one
    gotoAndStop("getPortfolio");
// Contact Me button defintion \\
Contact_btn.addEventListener(MouseEvent.CLICK, cClick);
function cClick(event:MouseEvent):void{                                                           <--------and this one
    gotoAndPlay("contactme");
it gave me the same error but they are not the same

Why am I getting this error message when I try to import? "The following files were not imported because they could not be read. (645)" I can see them :(

Why am I getting this error message when I try to import? "The following files were not imported because they could not be read. (645)" I can see them
Is was working this morning!

Depends on your operating system
Go to google, try typing in
Change permissions Windows
or
Change permissions Mac

"Backup Assistanmt has encountere​d a security error. Please check applicatio​n's permission​'s" Why am I getting this error?

Similar Messages

Maybe you are looking for

"Backup Assistanmt has encountered a security error. Please check application's permission's" Why am I getting this error?