Backup catalog files not readable by Elements 6

I have been using PSE 6 for quite a while and have backed up my catalog several times with no problem. For some reason, this time, when saving it to my ext hard drive, PSE saved them in some odd tagged files which i will include. One of the files I can open but it is not the catalog that I was intending to save. I have tried opening each of the files but to no avail. Is there any way to restore this catalog or is it lost forever? These are the files that it saved in my elements sequel folder:
backupCT DAT file 1KB
Catalog PSEDB File 368KB (I can access this one)
collstatus DAT File 1KB
itemData.mk4 MK4 File 221KB
Tagstatus DAT File 1KB
Thumb.5 Cache File 2,143KB
This is where the catalog was saved to
computer>Exp Drive>From Elements>Elements Sequel>Elemenst Sequel
Are there any downloads that I could use to open the cache file?
Thanks for any help you can give.

longliz88 wrote:
Are there any downloads that I could use to open the cache file?
It'll do no good -- the cach file only contains the thumbnails.
Can you make another, full backup?
Ken

Similar Messages

Disc Burner. Why are some files not readable or writeable?

Hello,
I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
"The operation cannot be completed because some data cannot be read or written.
(Error code - 36)"
Followed by the choices: "Stop" or "Continue".
I have a bad feeling that my startup disk is too small but I am not sure.
Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
Here are the specifications:
Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
Here is my process (I hope I am doing this right - I am new at this):
1. I first insert a blank DVD-R
2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
Why would some files not be readable or writeable?
4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
"Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
Am I doing this the right way?
Why are some files not "readable or writeable" as it indicates in the error message?
Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
Thanks

To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
Thanks Kappy

"File not readable" error in CS6

I've opened the file, worked on the file, saved the file and suddenly I'm getting a "File not readable" error upon open. Running CS6. One file was saved out to CS5 compatible. Created another test file and it saved out and reopened without issue.
Mac Yosemite. Only update done between opening was an Adobe Flash Player, which really shouldn't affect this. I've also tried pulling the file again from my cloud account to see if it was corrupted on my desktop...same issue.
Anyone having this issue and know how to solve for it?

skredberry,
Are you saving to your own harddisk?
It is always recommended here to open/save your documents from/to your own harddisk, then copy to external media/servers/whatever as backup.
You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk.

File not readable

I have been working on my sister in laws wedding imovie project and now when I try and open it, it says file not readable. I can open other saved movies and when i tried to start a new one and saved it, the new one is also saying file not readable. Is there any hope? Can I fix it so I can do a new one?

The project has probably been damaged, usually the result of emptying the iMovie trash. If you'd like me to try to rescue it, see my note here:
http://discussions.apple.com/thread.jspa?messageID=1329742&#1329742
If a project is unreadable, it may be (indirectly) affecting your trying to open the new project, causing you to conclude it is unreadable too.
Double-clicking on the iMovie application to launch it — or single-clicking on iMovie in the Dock — normally causes iMovie to open the most recently-opened project. The name of that project is saved in the iMovie preference file.
iMovie may be repeatedly trying to open the corrupt project instead of the new one, creating the (false) impression the new project is corrupt too.
It's also possible iMovie is damaged, but that doesn't usually cause iMovie to complain it can't read a project. It just fails to open.
My guess is the problem is limited to just one project. To find out for sure, double-click on a project you KNOW is okay to open iMovie, create a new project, save it, quit iMovie and re-launch iMovie. If the new project opens, everything is okay, but the corrupt project needs fixing.
Karl

CQ5 Startup errors ESAPI directory or file not readable.

Here is the startup screen output with the errors bolded, any help is appreciated.
:/lopt/dev/instances/author1/crx-quickstart/bin $ 31.05.2013 08:08:32.365 *INFO * [main] Setting sling.home=crx-quickstart (command line)
31.05.2013 08:08:32.371 *INFO * [main] Starting Apache Sling in /lopt/dev/instances/author1/crx-quickstart
31.05.2013 08:08:32.380 *INFO * [main] Checking launcher JAR in folder /lopt/dev/instances/author1/crx-quickstart/launchpad
31.05.2013 08:08:32.380 *INFO * [Apache Sling Control Listener@/127.0.0.1:43654] Apache Sling Control Listener started
31.05.2013 08:08:32.399 *INFO * [main] Existing launcher is up to date, using it: 2.4.1.R1416835 (org.apache.sling.launchpad.base.jar)
31.05.2013 08:08:32.402 *INFO * [main] Loading launcher class org.apache.sling.launchpad.base.app.MainDelegate from org.apache.sling.launchpad.base.jar
31.05.2013 08:08:32.440 *INFO * [main] Setting sling.launchpad=/lopt/dev/instances/author1/crx-quickstart/launchpad
31.05.2013 08:08:32.441 *INFO * [main] Setting sling.home=crx-quickstart
31.05.2013 08:08:32.441 *INFO * [main] Setting org.osgi.service.http.port=4502
31.05.2013 08:08:32.441 *INFO * [main] Starting launcher ...
31.05.2013 08:08:32.442 *INFO * [main] HTTP server port: 4502
RAWProcessor succesfully installed
31.05.2013 08:09:06.608 *INFO * [main] Startup completed
Attempting to load ESAPI.properties via file I/O.
Attempting to load ESAPI.properties as resource file via file I/O.
Not found in 'org.owasp.esapi.resources' directory or file not readable: /lopt/dev/instances/author1/ESAPI.properties
Not found in SystemResource Directory/resourceDirectory: .esapi/ESAPI.properties
Not found in 'user.home' (/lopt/adobe) directory: /lopt/adobe/esapi/ESAPI.properties
Loading ESAPI.properties via file I/O failed. Exception was: java.io.FileNotFoundException
Attempting to load ESAPI.properties via the classpath.
SUCCESSFULLY LOADED ESAPI.properties via the CLASSPATH from '/ (root)' using class loader for DefaultSecurityConfiguration class!
Attempting to load validation.properties via file I/O.
Attempting to load validation.properties as resource file via file I/O.
Not found in 'org.owasp.esapi.resources' directory or file not readable: /lopt/dev/instances/author1/validation.properties
Not found in SystemResource Directory/resourceDirectory: .esapi/validation.properties
Not found in 'user.home' (/lopt/adobe) directory: /lopt/adobe/esapi/validation.properties
Loading validation.properties via file I/O failed.
Attempting to load validation.properties via the classpath.
SUCCESSFULLY LOADED validation.properties via the CLASSPATH from '/ (root)' using class loader for DefaultSecurityConfiguration class!

Hi jtwcarboy,
Apart from message in logs are you facing any functionality issue is AEM?
Thanks,
Sham

What does "File not readable" error message mean?

I am trying to copy/paste art from a supposed "corrupt" file into a brand new document. When I paste, I get this particular error message: File not readable. What, exactly, does this mean?

Amanda,
It is nice to know that it works now. Thank you for letting us know.
Actually, the solution was identical to this part of the list in post #3:
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup;
I ruled that out because in post #2 you wrote
I have tried EVERYTHING ... Dumped the preferences....
Ctrl+Alt+Shift/Cmd+Option+Shift is the standard way of deleting = resetting = dumping the basic preferences so I was convinced you had done that already (hence my suggestion to start with 4 and skip 1) - 3)).
Actually, when you
4) Move the folder with Illy closed;
as suggested in post # 3, you move all the preferences to another place so that they are reset to the defaults when you open Illy next time; this procedure is more thorough (and therefore capable of solving more issues) and reversible so you can get the preferences back if it does not help.
I presume you did not try 4).

Photoshop Elements 13 Restoring Catalog / Files Not Able To Be Restored

I backed up my catalog from an older Photoshop version using the backup to hard drive option. Then I restored my catalog to Photoshop Elements 13 on a new computer, but had files not able to be restored. Does this means they are in my catalog but missing links to the actual files or not in the catalog at all? & is there something I can do differently to try the restore again without this happening? Thanks!

Hi,
See if this helps.
Convert Organizer catalogs for 64-bit versions | Photoshop Elements 13 or later
Brian

Mac PDF files not readable on PC

I am constantly getting messages from my PC friends that the photoshop files I create and then convert to either pdf or jpg are not readable on their pc. Sometimes the files are split into two files (one very small and the other large) with the same name. The larger file is usually able to be opened.
What can I do to make my proofs easier to read for pc users? This has gotten frustrating.
Thanks for your help.

The problem is that I cannot control what version of Adobe the person is using who I'm sending the file to. This has been hugely embarrassing to me as I've been sending out files with my work. Some of the recipients were kind enough to point out that the file seems corrupted, others simply put me on a "waste of time" list.
I've tried it on my windows machine, and using Acrobat Reader 8 and Acrobat professional 7.0. The text appears as little circles and the file is not readable.
On the Mac, I can reproduce the problem, too.
Adobe Illustrator (version CS) cannot read the file. Warnings are:
The font Univers-BlackExt is missing. Affected text will be displayed using a substitute font.
The font Univers-BoldExt is missing. Affected text will be displayed using a substitute font.
The font Univers-Condensed is missing. Affected text will be displayed using a substitute font.
The font Univers-Extended is missing. Affected text will be displayed using a substitute font.
The font Univers-ExtraBlackExt is missing. Affected text will be displayed using a substitute font.
The font Univers-Oblique is missing. Affected text will be displayed using a substitute font.
To preserve appearance, some text has been outlined.
Acrobat 6.0.2 Professional cannot read it on the Mac
Acrobat Reader 8.1.7 on Mac has no problems with it. It displays perfectly, just like under Preview.
But this is somewhat beside the point. A PDF file should be portable, so once I have one there should be a way to make sure it can be read by all Adobe products that can read PDF. How can I make sure?
Given that I can see everything perfectly on my Mac (e.g. using Reader 8.1.7), how can I ensure the same can be seen by any other user on any system reading a PDF file? I guess that this has to do with your (Adobe's) PDF specifications. How can I "enforce" those?
Many thanks!

I-Movie project file not readable!?!?!

Just did a lot of work in I-Movie 4.0 and had a good 25 min. of almost finished movie and a lot of clips stored in the clip window. This is a project I have been working on for a few weeks. Later when I went to turn I-Movie back on it said the I-Movie project file was not readable. I have never seen this happen. I don't know what I could have done? I was emptying some trash before I turned it off but there is no way I would have erased the movie. How did I corrupt the file? I can access the time line movie through the quicktime file but there are lots of missing sound and I'm missing all the extra clips. How can I get that I-Movie project file to open!?!?!?

It's usually possible to re-open a damaged project by identifying and removing any flawed clips — those that were damaged by emptying the iMovie Trash. I can usually help you do that if you send me a couple files.
This describes what files to send:
http://discussions.apple.com/thread.jspa?messageID=1329742&#1329742
That forum Topic also describes the problem, if you wish to learn about it.
Karl

Scanned pdf file not readable

When I scan my document and it goes into the export PDF it is not readable?

Do you get an error message?
[topic moved to ExportPDF forum]

Backup device file not appearing in iTunes Device Preferences

While performing 1st time backup for my iPad to iTunes MacBook, the process was interrupted halfway through. As such, I deleted the registered backup file from iTunes Devices Preferences/device/device backup and attempted to reinitiate the backup process. I have to restart MacBook because the iTunes File/Devices turns grey and I am not able to click on it. Restarting gets me to inititiate the back up and transfer purchase. The problem now the device name is not appearing at iTunes Devices Preferences/device/device backup. I am not sure if the backup is successful/complete and if so where is the files? How do I make the file appear so I can transfer the data / apps to my new ipad air via iTunes. Pls help...

Device not detected in iTunes for Windows

Canon G15 files not previews in Elements 11

I am currently using a trial version of Elements 11 which has camera raw ver.7.3.071. I can not see any previews of raw files in the organizer or editor for the Canon G15. I can however import the raw file and then open it to view or edit it. Without the preview option, browsing for your photos is impossible. Can anybody please help?
Thank you
Peter

Following link contains the list of the cameras supported with camera raw.
Please check is your camera listed or not:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Thanks
Harshit Yadav

NEF files not readable in Lightroom

I have just bought a D7000 and a first time user of Lightroom 3. Updated saftware to 3.5 but program will not show NEF files. Installed Nikon NX program and it will display all the NEF files I shot. I spent several hours trying to find a solution on the web with no sucess

Lightroom version: 3.2 [692106]
Operating system: Windows Vista Service Pack 2 (Build 6002)
Version: 6.0 [6002]
Application architecture: x64
System architecture: x64
Physical processor count: 2
Processor speed: 1.9 GHz
Built-in memory: 3995.9 MB
Real memory available to Lightroom: 3995.9 MB
Real memory used by Lightroom: 158.1 MB (3.9%)
Virtual memory used by Lightroom: 151.5 MB
Memory cache size: 2.0 MB
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1366x768
Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 3.2
Library Path: D:\John\Pictures\Lightroom\Lightroom 3 Catalog.lrcat
Sorry I took so long, my son helped me get the pictures
John
Edited by Forum Host
IanLyons

[Ecore] xsd2ecore files not readable any longer after migration to Mars

Hello,
When working in Luna, I had no problems to visualise the contents of xsd2ecore files with the Ecore to XML Mapping Editor.
Now that I've migrated to Eclipse Mars, the files do not seem readable any longer. The editor emits two errors :
Quote:
org.eclipse.emf.ecore.xmi.PackageNotFoundException: Package with uri 'http://www.eclipse.org/emf/2002/XSD2Ecore' not found. (platform:/resource/be.groups.portfolio.domain/model/portfolioExtended.xsd2ecore, 5, 24)
and
Quote:
ClassNotFoundException: Class 'XSD2EcoreMappingRoot' is not found or is abstract. (platform:/resource/be.groups.portfolio.domain/model/portfolioExtended.xsd2ecore, 5, 24)
Is there anything I have to do to make the editor work as before ?
I'm using the EMF XML to Ecore Mapping Editor 2.8.0.v20150601-0402.
Thanks for any advice,
Thomas Elskens

Thomas,
Comments below.
On 14/07/2015 3:25 PM, Thomas Elskens wrote:
> Hello,
>
> When working in Luna, I had no problems to visualise the contents of
> xsd2ecore files with the Ecore to XML Mapping Editor.
> Now that I've migrated to Eclipse Mars, the files do not seem readable
> any longer. The editor emits two errors :
The XML Mapping Editor isn't the same as the XSD to Ecore Model Editor.
So it sounds like you don't have the right editor/model plugins
installed. In particular, the org.eclipse.emf.mapping.xsd2ecore bundle
must be installed for any editor to recognize this model. You can
update your installation to install it from the Mars repository.
>
> Quote:
>> org.eclipse.emf.ecore.xmi.PackageNotFoundException: Package with uri
>> 'http://www.eclipse.org/emf/2002/XSD2Ecore' not found.
>> (platform:/resource/be.groups.portfolio.domain/model/portfolioExtended.xsd2ecore,
>> 5, 24)
>
>
> and
> Quote:
>> ClassNotFoundException: Class 'XSD2EcoreMappingRoot' is not found or
>> is abstract.
>> (platform:/resource/be.groups.portfolio.domain/model/portfolioExtended.xsd2ecore,
>> 5, 24)
>
>
> Is there anything I have to do to make the editor work as before ?
> I'm using the EMF XML to Ecore Mapping Editor 2.8.0.v20150601-0402.
> Thanks for any advice,
>
> Thomas Elskens

MDL files not readable in OWB 10gR2?

I have exported an MDL file in OWB 10gR2 for an entire OWB Project (using Design -> Export -> Warehouse Builder Metadata in the Design Center). I noticed that the resulting MDL file is not in readable ASCII format (unlike previous releases such as OWB 9i).
Is this the expected behaviour?
I guess it doesn't really matter what format it is in, since I was able to delete a table from the repository using the Design Center GUI and then re-create it in the repository by importing my MDL file.

Alas, it seems that the export is now a binary file. This probably has some real benefits somewhere, but I for one am not keen on it. There have been scenarios where I had to alter the MDL file manually to re-import it, but should such an occation present itself again, I won't be able to.
Not that I have been able to migrate to 10gR2 yet, due to a bug, that I might be able to fix myself if I had access to plaintext MDL file ...
Borkur

Backup catalog files not readable by Elements 6

Similar Messages

Maybe you are looking for